Ta b l e of XLR Cable Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 7 Solder and IDC terminations Digital Right Angle Heavy Duty with On-Off Switch with Locking Ring Contents Miniature Circular Connectors . . . . . . . . . . . . . . . . . . 24 - 27 NanoCon(R) (up to 3 contacts) Neutricon(R) (up to 8 contacts) MiniCon(R) (up to 12 contacts) Profi(R) (RCA Plugs) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Patch Cables (TT & TB plugs) . . . . . . . . . . . . . . . . . . . . . . . 29 XLR Receptacles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 14 Solder PCB Mount IDC Jacks and Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 - 18 1/4" plugs - mono & stereo TT & TB plugs and jacks Vertical PCB and Panel Mount 1/4" jacks XLR Combo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Speakon(R) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 - 22 2, 4, or 8 pole cable ends PCB mount, Solder or Screw Terminal Receptacles Adapters: Speakon to 1/4" and Cable extenders "EasyPatch" audio patch panels . . . . . . . . . . . . . . . . . 30 - 33 TT & TB styles Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 - 38 XLR Adapters & Modules Goosenecks, Transformers, Wallplates AES/EBU Adapters XLR & Color Coded Accessories . . . . . . . . . . . . . . . . . . . . . 39 BSP, BSX, BSTP, BSZ, DSS, PCR, XCR SCDF, SCDM DBA Contact Arrangements . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 Neutrik Part # Guide . . . . . . . . . . . . . . . . . . . . . . . . . . 40 - 41 PowerCon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Input Output Cable extender (R) Indexes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 - 44 by Part by Series New Products Added to this Catalog Digital XLR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3, 7 Easycon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5, 7 4 & 5 pin A/B Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 10 Speakon(R) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 - 22 4 pole Receptacles - Increased Current & Screw Terminal Water resistant drip boot 8 pole Receptacles with metal bezel Easy Patch - NPPA Series TT patch panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 - 31 Color Coded Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 PCR - color coded ID rings for NP*C series BSZ - color coded boots for Easycon XLR cable connectors W h e r e t o o b t a i n Te c h n i c a l I n f o r m a t i o n Spec Drawings: Dimensional drawings in .pdf and .dxf formats are available on the web - www.neutrik.com in the PRODUCTS section. Assembly Instructions: Available on the web - www.neutrik.com - in the TECHNICAL SUPPORT section. All files are .pdf. In person technical support for US customers - 732-901-9488 or info@neutrikusa.com. In person technical support outside of the US - contact Neutrik AG - neutrik@neutrik.com - for the Neutrik sister company or agent nearest to you. FAQs - Available on the web - www.neutrikusa.com - in the FAQ section. 732-901-9488 www.neutrikusa.com 1 Cable Connectors X Series This series has become the accepted worldwide standard for XLR cable connectors. The compact design offers the shortest XLR cable version in the industry. The female features an insert which is completely surrounded by metal for added protection and the shell has a rubber ring for secure mating to a male XLR or microphone. Assembly is quick and easy with no screws to worry about and includes the unique NEUTRIK(R) chuck type strain relief. Accessories include BSX boots and XCR labeling rings for color coding identification (see page 39). O R D E R I N G I N F O R M AT I O N - " X " S e r i e s M a l e # of Contacts Nickel Shell Silver Contacts Black Chrome Shell Silver Contacts Gold Contacts 3 NC3MX NC3MX-BAG NC3MX-B 3** NC3MX-D NC3MX-BAG-D NC3MX-B-D 4 NC4MX NC4MX-BAG NC4MX-B XLR RC Series Digital XLR A more economical version of the standard "X" series connectors, the X-1 series has a one piece plastic boot and is only available in 3 pin configurations. These compact, low profile, right angle cable connectors are designed to select any of 7x45 positions by rotating the assembled insert into various indents before securing back cover. The Digital XLR is a 3-pole connector that allows the transmission of digital audio signals, according to AES3, efficiently and reliably. Features include a coaxial ground spring and coaxial hex crimp ferrule at the cable entrance for accurate and reliable transition of the shield to the shell. The XCC series provides continuous (360) ground connection of the cable shield to the shell, which is essential when transmitting digital audio signals. The X-14 series is also only available in 3 pin configurations and features a chuck that can accommodate cable diameters up to 9.7mm. Both the X-1 and the X-14 series can use the XCR rings for color coding (see page 39). O R D E R I N G I N F O R M AT I O N - " X - 1 " S e r i e s M a l e # of Contacts Nickel Shell Black Chrome Shell Silver Contacts Nickel Shell Silver Contacts Black Chrome Shell Silver Contacts Gold Contacts 3 NC3MRC NC3MRC-BAG NC3MRC-B 4 NC4MRC NC4MRC-BAG NC4MRC-B 5 NC5MRC NC5MRC-BAG NC5MRC-B NC3MX-1 NC3MX-1-BAG 6 NC6MRC NC6MRC-BAG NC6MRC-B 3** NC3MX-1-D NC3MX-1-BAG-D 6* NC6MRCS NC6MRCS-BAG NC6MRCS-B 7 NC7MRC NC7MRC-BAG NC7MRC-B O R D E R I N G I N F O R M AT I O N - " X - 1 " S e r i e s F e m a l e # of Contacts Nickel Shell Black Chrome Shell Silver Contacts NC5MX NC5MX-BAG NC5MX-B 3 NC3FX-1 NC3FX-1-BAG NC6MX NC6MX-BAG NC6MX-B 3** NC3FX-1-D NC3FX-1-BAG-D 6* NC6MXS NC6MXS-BAG NC6MXS-B 7 NC7MX NC7MX-BAG NC7MX-B **Must be ordered in multiples of 100 Special orders may be available - contact Neutrik USA, Inc.(R) for details O R D E R I N G I N F O R M AT I O N - " X - 1 4 " S e r i e s M a l e # of Contacts Nickel Shell Black Chrome Shell Nickel Shell Silver Contacts Black Chrome Shell Silver Contacts Gold Contacts 3 NC3FX NC3FX-BAG NC3FX-B 3** NC3FX-D NC3FX-BAG-D NC3FX-B-D 4 NC4FX NC4FX-BAG NC4FX-B O R D E R I N G I N F O R M AT I O N - " X - 1 4 " S e r i e s F e m a l e 5 NC5FX NC5FX-BAG NC5FX-B 6 NC6FX NC6FX-BAG NC6FX-B # of Contacts 6* NC6FXS NC6FXS-BAG NC6FXS-B 3 7 NC7FX NC7FX-BAG NC7FX-B **Bulk packaged available in 3 pin version only. Must be ordered in multiples of 100 *Switchcraft(c) equivalent O R D E R I N G I N F O R M AT I O N - " R C " S e r i e s M a l e # of Contacts 3 6 # of Contacts Connectors X-1 and X-14 Series 5 O R D E R I N G I N F O R M AT I O N - " X " S e r i e s F e m a l e Cable 3 Silver Contacts NC3MX-14 NC3MX-14-B Nickel Shell Black Chrome Shell Silver Contacts NC3FX-14 Available bulk packed. Must be ordered in multiples of 100 Contact Neutrik USA, Inc.(R) for details. NC3FX-14-B O R D E R I N G I N F O R M AT I O N - " R C " S e r i e s F e m a l e # of Contacts Nickel Shell Silver Contacts Black Chrome Shell Silver Contacts Gold Contacts 3 NC3FRC NC3FRC-BAG NC3FRC-B 4 NC4FRC NC4FRC-BAG NC4FRC-B 5 NC5FRC NC5FRC-BAG NC5FRC-B 6 NC6FRC NC6FRC-BAG NC6FRC-B 6* NC6FRCS NC6FRCS-BAG NC6FRCS-B 7 NC7FRC *Switchcraft(c) equivalent NC7FRC-BAG Additionally excellent screening is provided up to 1.3GHz of min-55dB (50 times better) and is especially suited for coverage of the frequency range of mobile phones (see graph below). O R D E R I N G I N F O R M AT I O N - D i g i t a l X L R # of Contacts 3 Nickel Shell Gold Contacts Male Female NC3MXCC NC3FXCC Crimp: HX-BNC ro M225201/5 01 Die: DIE-BNC-PG (6.5 mm hex) Available in 4-7 pin configurations (including Switchcraft(R) 6 pin configurations) as special order. Minimum order required. Contact Neutrik USA, Inc.(R) for details. Frequency in MHz 00 NC7FRC-B Screening Attenuation in dB XLR 300 600 900 1200 -10 -20 -30 -40 -50 -60 -70 -80 -90 -100 732-901-9488 2 www.neutrikusa.com 3 XLR Cable Connectors FX-SPEC Series X-HD Series This connector offers a locking ring for the highest security protection of your microphones on the market today. Just twist the ring into place and tighten the allen M2.5 screw with a 1.27mm wrench for passive theft protection. The locking ring also protects against accidental disconnects. O R D E R I N G I N F O R M AT I O N - " F X - S P E C " S e r i e s # of Contacts Black Chrome Shell Silver Contacts 3 NC3FX-SPEC XLR O R D E R I N G I N F O R M AT I O N - " X - H D " S e r i e s M a l e 3 Stainless Steel Shell Gold Contacts NC3MX-HD NC3MX-HD-B* * -B version has black boot only (male shell is not black) O R D E R I N G I N F O R M AT I O N - " X - H D " S e r i e s F e m a l e # of Contacts 3 Neoprene Covered Shell with Gold Contacts Nickel Shell Black Chrome Shell NC3FX-HD Connectors Easycon Series These heavy duty cable connectors were made for outdoor, high traffic, or industrial applications. The male shell is stainless steel and the female is covered in neoprene with a sealing lip to mate securely. Gold contacts, which offer superb abrasion resistance, are standard. The two piece metal boot contains a rubber "O" ring which prevents elements from entering the shell. The X-HD series is dust proof, water and corrosion resistant according to IEC-144:IP65 when mated together or IEC-144:IP54 when mated with others. # of Contacts Cable NC3FX-HD-B "NEUTRIK(R) redefines the future of XLR Cable Connectors" O R D E R I N G I N F O R M AT I O N - E A S Y C O N - I D C - M a l e NEUTRIK once again takes the lead in offering innovative designs for audio connector applications. Available with either IDC or solder contacts, Easycon(R) is made of only three pieces. There is no set screw or additional parts to drop or lose. We believe that these connectors are the fastest way to terminate a cable with an XLR - allowing the user to reduce assembly time by as much as 60%. # of Contacts Easycon(R) gold-plated (TRIBOR(R)), polished, self cleaning "tuning-fork" IDC or solder contacts (patents granted and pending) extend lifetime mating cycles allowing easy and reliable connections every time. The solderless shield connection is direct to Pin 1. A drain wire connection is also included. 3 Nickel Shell/ Gold Contacts Black Chrome/ Gold Contacts NC3MEZY-AU NC3MEZY-B ORDERING INFORMATION - EASYCON - IDC - Female # of Contacts 3 Nickel Shell/ Gold Contacts Black Chrome/ Gold Contacts NC3FEZY-AU NC3FEZY-B ORDERING INFORMATION - EASYCON - Solder - Male # of Contacts 3 Nickel Shell/ Gold Contacts Black Chrome/ Gold Contacts NC3MEZ-AU NC3MEZ-B The self-adjusting cam lock cable clamp (patent granted US 6 783 804) accepts a wide range of cable diameters (5.5mm - 7.0mm) and provides increased retention force under tensile stress. ORDERING INFORMATION - EASYCON - Solder - Female Use the BSZ boots for easy color coding identification (see page 39). All Easycon is available bulk packed. Add "-D" as suffix when ordering. Must be ordered in multiples of 100. Contact Neutrik USA, Inc.(R) for details. # of Contacts 3 Nickel Shell/ Gold Contacts Black Chrome/ Gold Contacts NC3FEZ-AU NC3FEZ-B Male and Female connectors available in 4-7 pin configuration including 6 pin Switchcraft(c) equivalent. Contact Neutrik USA, Inc.(R) for ordering information. FX-S Series The FX-S series offers a noiseless ON/OFF switch which shorts pins 2 and 3 muting the signal voltage between conductors. Gold contacts are standard. O R D E R I N G I N F O R M AT I O N - " F X - S " S e r i e s M a l e # of Contacts 3 Nickel Shell Black Chrome Shell Gold Contacts NC3FX-S NC3FX-S-B 732-901-9488 4 www.neutrikusa.com 5 XLR Cable Connectors "X" Series "X-1" Series Specifications "X-14" Series XLR Cable "RC" Series "X-HD" Series Connectors Specifications Digital XLR "FX-SPEC Series" "EasyCon Series" "FXS" Series 3 only 3 only 3 only 3 only Electrical Electrical Number of contacts: 3-7 X 3 only 3 only X X Number of contacts: 3-7 Rated current: See table below X X X X X Rated current: See table below X X 6A X Contact resistance: <3 m X X X X X Contact resistance: <3 m X X 6m X X X X X X X X X X Insulation resistance: Insulation resistance: * initial: >2G * after damp heat test: >1G Dielectric strength: 1500 V dc X X X X X X X X X X * initial: >2G * after damp heat test: >1G Dielectric strength: 1500 V dc X X X X X X X X Mechanical Mechanical Insertion / withdrawal force: 20N X X X X X Insertion / withdrawal force: 20N X X X X Max. wire size: See table below X X X X X Max. wire size: See table on previous page X X AWG 26-22 X Cable O.D. range: 3.5 mm - 8.0 mm X 4 mm - 7 mm 4 mm - 9.7 mm 4 mm - 7 mm X Cable O.D. range: 3.5 mm - 8.0 mm X X 5.5 - 7.0 mm X Temperature range: -30C to +80C X X X X X Temperature range: -30C to +80C X X X X Flammability: UL 94HB X X X X X Flammability: UL 94HB X X N/A X Solderability: Complies with IEC 68-2-20 X X X X X Solderability: Complies with IEC 68-2-20 X X X X N/A N/A N/A N/A IP 65 N/A N/A N/A N/A X N/A N/A X X X X X X X N/A X N/A N/A * female (3 pole) CuSn6 X X X X * female (4-7) pole & male CuZn39Pb3 X N/A CuZn36Pb1.5 N/A X X Environmental Environmental Protection class: Protection class: Materials Materials Shell: ZnAl4Cu1, gal Ni or black chrome over Cu plating X X X X X Insert: PA 6.6 30% GR (glass reinforced) X X X X X N/A N/A N/A N/A N/A Shell: ZnAl4Cu1, black chrome over Cu plating Insert: PA 6.6 30% GR (glass reinforced) Locking ring: ZnAl4Cu1, gal Ni or black chrome over Cu plating Contacts: * female (3 pole) CuSn6 X X X X X * female (4-7 pole) & male CuZn39Pb3 X X X X X -B versions only N/A N/A -B versions only X Latch lock: St3K32 (latch)/Ck 67 (spring) X X X X Strain relief clamp: POM X X X Antikink boot: PUR X X X Contact surface: gal 0.2 m Au hard alloy over 2 m Ni Locking ring: ZnAl4Cu1, gal Ni or black chrome over Cu plating Contacts: X N/A X Contact surface: gal 0.2 m Au hard alloy over 2 m Ni gal 0.1m AuCo over 2mNiP15(Tribor(R)) X X Latch lock: St3K32 (latch)/Ck 67 (spring) X X N/A X X Strain relief clamp: POM Antikink boot: PUR Ni/Su X X X X X Pu/EPDM X X L R R a t e d C u r re n t # of contacts I [A] {mm2/AWG} C[pF] 3 16 2.5/14 4 4 10 1.5/16 7 5 7.5 1.0/18 7 6 7.5 1.0/18 7 7 5 1.0/18 9 732-901-9488 6 www.neutrikusa.com 7 XLR Receptacles XLR A/B Series The A/B series of XLR receptacles offer a variety of standard features including hard gold contacts. They are the smallest receptacles on the market today and when mounted side by side are only 0.90" center to center. These receptacles are also extremely cost effective, are available in 3, 4 & 5 pin configurations and a revolutionary tuning fork contact design is standard on the females. The "A" series is made of high impact glass reinforced UL94V-0 plastic. The "B" series features a metal (nickel or Receptacles A/B Series black chrome) mounting flange, which enables continuous circumferential chassis ground contact for complete EMC and RF protection. The 3 pin male "A" series offers either a ground contact which is connected through the chassis mounting hole to reduce EMC interference or you can order without the ground contact. See the ordering information below for correct part #s. The 3 pin female receptacles are currently available in horizontal and vertical PCB mount terminations and offer three grounding options - no ground, pin 1 and chassis ground together, or pin 1 and chassis ground separate. The horizontal PCB mount versions of the male and the female are also available in lateral right or left pin outs. The 3 pin male and female receptacles are also offered in an IDC version. The new 4 & 5 pin versions are recommended for DMX and lighting applications and are available in horizontal or vertical PCB mount. The grounding feature for the 4 & 5 pin females is pin 1 and chassis ground separate. Additional grounding and latchless versions of the females may be available as special orders. Please call Neutrik USA, Inc.(R) for details. Color coded identification rings are available - use part #s ACRF-color and ACRM-color (see page 39). These rings are available in 9 of the resistor colors (no black) and can be used on both the "A" and the "B" series. O R D E R I N G I N F O R M AT I O N - " A / B " S e r i e s M a l e - 4 P I N O R D E R I N G I N F O R M AT I O N - " A / B " S e r i e s M a l e - 3 P I N Gold Contacts Termination Plastic Shell with ground Plastic Shell without ground Shell w/Ni Ring Shell w/Blk Cr Ring Gold contacts Termination Plastic Shell Shell w/Ni Ring Shell w/Blk Cr Ring PCB Mount Horizontal NC3MAH NC3MAH-0 NC3MBH NC3MBH-B PCB Mount Horizontal NC4MAH NC4MBH NC4MBH-B PCB Mount Horizontal Lateral Right NC3MAHR N/A NC3MBHR NC3MBHR-B PCB Mount Vertical NC4MAV NC4MBV NC4MBV-B PCB Mount Horizontal Lateral Left NC3MAHL N/A NC3MBHL NC3MBHL-B PCB Mount Vertical NC3MAV NC3MAV-0 NC3MBV NC3MBV-B IDC NC3MAY N/A NC3MBY NC3MBY-B Special version of "B" series available w/ additional ground contacts, add "-E" as suffix. Contact Neutrik USA, Inc. for details. Minimums may be required. (R) O R D E R I N G I N F O R M AT I O N - " A / B " S e r i e s F e m a l e - 4 P I N Gold contacts Termination Plastic Shell Shell w/Ni Ring Shell w/Blk Cr Ring Ground PCB Mount Horizontal NC4FAH NC4FBH NC4FBH-B Pin one & chassis ground separate PCB Mount Vertical NC4FAV NC4FBV NC4FBV-B Pin one & chassis ground separate latchless (retention spring instead of PUSH tab) versions of females may be available as special order - add "-0" as suffix when ordering. Contact Neutrik USA, Inc.(R) for details. O R D E R I N G I N F O R M AT I O N - " A / B " S e r i e s F e m a l e - 3 P I N Gold Contacts Termination Plastic Shell Shell w/Ni Ring Shell w/Blk Cr Ring Ground PCB Mount Horizontal NC3FAH* NC3FAH-1* NC3FAH-2* N/A NC3FBH-1* NC3FBH-2* N/A NC3FBH-1-B NC3FBH-2-B No special ground feature Pin one & chassis ground together Pin one & chassis ground separate Gold contacts Termination Plastic Shell Shell w/Ni Ring Shell w/Blk Cr Ring PCB Mount Horizontal NC5MAH NC5MBH NC5MBH-B PCB Mount Horizontal Lateral Right NC3FAHR-1* NC3FAHR-2* NC3FBHR-1* NC3FBHR-2* NC3FBHR-1-B NC3FBHR-2-B Pin one & chassis ground together Pin one & chassis ground separate PCB Mount Vertical NC5MAV NC5MBV NC5MBV-B PCB Mount Horizontal Lateral Left NC3FAHL-1* N/A NC3FBHL-1* N/A NC3FBHL-1-B N/A Pin one & chassis ground together Pin one & chassis ground separate PCB Mount Vertical NC3FAV* NC3FAV-1* NC3FAV-2* N/A NC3FBV-1* NC3FBV-2* N/A NC3FBV-1-B NC3FBV-2-B No ground feature Pin one & chassis ground together Pin one & chassis ground separate NC3FAY* NC3FBY NC3FBY-B No special ground feature IDC O R D E R I N G I N F O R M AT I O N - " A / B " S e r i e s M a l e - 5 P I N O R D E R I N G I N F O R M AT I O N - " A / B " S e r i e s F e m a l e - 5 P I N Gold contacts Termination Plastic Shell Shell w/Ni Ring Shell w/Blk Cr Ring Ground PCB Mount Horizontal NC5FAH NC5FBH NC5FBH-B Pin one & chassis ground separate PCB Mount Vertical NC5FAV NC5FBV NC5FBV-B Pin one & chassis ground separate latchless (retention spring instead of PUSH tab) versions of females may be available as special order - add "-0" as suffix when ordering. Contact Neutrik USA, Inc.(R) for details. *W/ retention spring instead of "push" tab add, "-O" as suffix ie. NC3FAH-1-O 8 Mounting Screws 3 pin A Series use part # Screw-2.9m 3 pin B Series use part # Screw-2.5m Mounting Screws 4 and 5 pin A & B Series use part # Screw-2.9m 732-901-9488 www.neutrikusa.com 9 XLR Receptacles A / B S E R I E S S P E C I F I C AT I O N S Specifications 3 PIN 4 PIN 5 PIN Number of contacts: 3 4 5 Rated current: 6A 4A 3A Rated voltage: 50 Vac X X X Dielectric strength: 1500 V dc X X X Contact resistance (measured between soldering points): @10 mA / 1kHz @10 mA / 1kHz @10 mA / 1kHz Female: <5 m X X X Male: <3 m X X X Female: <7 m X X X Male: <4 m X X X * Initial: >2G @ 500 Vdc X X X * After salt mist and damp heat test: >1G @ 500 Vdc X X X 4 pF 7 pF 7 pF XLR Receptacles Electrical * Initial * After salt mist and damp heat test Insulation resistance: Capacity between contacts: Mechanical Applicable wire size: 0.22mm2/24 AWG and 0.14mm2/26 AWG IDC Version only N/A N/A Retention method (female only): * Standard: latch lock X X X * "-O" version: retention spring instead of "PUSH" tab X X X X X X Separating force: 20N F 26N D Series This connector consists of an insert and shell which lock together using a "00" size flathead screwdriver (part # SD-1) after assembly. The ability to order the inserts and shells separately allows the user to choose the best combination for any application. PCB mount horizontal (right angle), O R D E R I N G I N F O R M AT I O N - " D " S e r i e s M a l e # of Nickel Contacts Silver Black Chrome Silver Gold Termination Operating temperature: -30C to +80C X X X Flammability: UL 94 HB UL 94V-0 X X Solderability: Complies with IEC 68-2-20 X X X * A-Series: PA 6.6 30% GR (glass reinforced) X * B-Series (ring): ZnAl4Cu1gal Ni or black chrome X X X X X Contacts: * Female: CuSn6 X X X * Male: CuZn35Pb2 X X X Contact surface: gal 0.2 m AuCo over 2 m NiP15 (Tribor) X X X Latch lock & spring: Ck 67 steel, treated X X X 732-901-9488 10 Black Chrome Silver Gold Termination PCB Mount Horizontal NC3MD-H NC3MD-H-BAG NC3MD-H-B PCB Mount Horizontal 3 NC3FD-H NC3FD-H-BAG NC3FD-H-B 3 NC3MD-V NC3MD-V-BAG NC3MD-V-B PCB Mount Vertical 3 NC3FD-V NC3FD-V-BAG NC3FD-V-B PCB Mount Vertical 3 NC3MD-L NC3MD-L-BAG NC3MD-L-B Solder Springs 3 NC3FD-L NC3FD-L-BAG NC3FD-L-B Solder Springs O R D E R I N G I N F O R M AT I O N - " D " S e r i e s Inserts/Shells Female # of Contacts Silver Gold Termination Nickel 3FD-H-I-B PCB Mt Horiz DH-NF** 3 3FD-H-I 3 3FD-H-I-0 N/A Materials Housing: O R D E R I N G I N F O R M AT I O N - " D " S e r i e s F e m a l e # of Nickel Contacts Silver 3 Inserts Environmental vertical, or solder springs are the available terminations. RF protected via 3 point coaxial ground contact to the shell of mated connectors. Available accessories are the same as for the "D-L-1" series (see page 39). 3FD-L-I-B DH-NFBAG** PCB Mt Horiz DH-NF-0** DH-NFBAG-0** 3 3FD-L-I 3 3FD-L-I-0 N/A Solder Spring 3 3FD-V-I PCB Mt Vert 3 3FD-V-I-0 N/A 3FD-V-I-B Shells Black Chrome O R D E R I N G I N F O R M AT I O N - " D " S e r i e s Inserts/Shells Male Inserts Black Plastic DHP # of Contacts Silver Gold Termination Nickel Shells Black Chrome 3 3MD-H-I 3MD-H-I-B PCB Mt Horiz DH-NM** DH-NMBAG** 3 3MD-L-I 3MD-L-I-B Solder Spring 3 3MD-V-I 3MD-V-I-B PCB Mt Vert Black Plastic DHP Solder Spring PCB Mt Vert -0 = Latchless - retention spring instead of "push" tab ** Shells available with M3 threads add "-M3" as suffix when ordering. Minimums may be required. Contact Neutrik USA, Inc.(R) for details. www.neutrikusa.com 11 XLR Receptacles P Series D-L-1 Series One piece metal shell panel receptacle with large solder cups. The insert is non-removable. The "P" Series is front mountable only and the male and female have different mounting dimensions. O R D E R I N G I N F O R M AT I O N - " P " S e r i e s M a l e # of Contacts Black Chrome Shell Silver Contacts Gold Contacts 3 NC3MP NC3MP-BAG NC3MP-B 4 NC4MP NC4MP-BAG NC4MP-B # of Contacts 5 NC5MP NC5MP-BAG NC5MP-B 6 NC6MP NC6MP-BAG NC6MP-B Male "P" Series not available in 6 pin Switchcraft equivalent or 7 pin configurations (c) O R D E R I N G I N F O R M AT I O N - " P " S e r i e s F e m a l e 3 Nickel Shell Silver Contacts NC3FP-1 Black Chrome Shell Silver Contacts Gold Contacts NC3FP-1-BAG NC4FP-1-BAG NC4FP-1-B NC5FP-1 NC5FP-1-BAG NC5FP-1-B 6 NC6FP-1 NC6FP-1-BAG NC6FP-1-B 6* NC6FPS-1 N/A N/A 7 NC7FP-1 N/A NC7FP-1-B *Switchcraft(c) equivalent Black Chrome Shell Silver Contacts Gold Contacts 3 NC3MD-L-1 NC3MD-L-1-BAG NC3MD-L-1-B # of Contacts 4 NC4MD-L-1 NC4MD-L-1-BAG NC4MD-L-1-B 3 only 5 NC5MD-L-1 NC5MD-L-1-BAG NC5MD-L-1-B 6 NC6MD-L-1 NC6MD-L-1-BAG NC6MD-L-1-B 6* NC6MDS-L-1 N/A NC6MDS-L-1-B 7 NC7MD-L-1 N/A NC7MD-L-1-B # of Contacts NC4FP-1 O R D E R I N G I N F O R M AT I O N - " P P " S e r i e s M a l e Nickel Shell Silver Contacts NC3FP-1-B 5 The PP series is a cost effective alternative for your XLR panel receptacle needs. Made in a black plastic housing with solder cup terminations, the PP series fits in the same mounting hole as our D-L-1 series. The female is latchless and both male and female are available with 3 contacts as standard. Accessories are the same as for the "D-L-1" series (see page 39). O R D E R I N G I N F O R M AT I O N - " D - L - 1 " S e r i e s M a l e O R D E R I N G I N F O R M AT I O N - " D - L - 1 " S e r i e s F e m a l e 4 Receptacles PP Series In this series the male and female fit in the same hole cut out and are front or rear mountable. The "D-L-1" Series features a one piece unit with solder cup terminations. This series is very cost effective. Accessories include male and female rubber dust covers (SCDF or SCDM), DBA blank plastic plate, and DSS color coded labeling plates (see page 39). Nickel Shell Silver Contacts # of Contacts XLR Nickel Shell Silver Contacts Black Chrome Shell Silver Contacts Gold Contacts 3 NC3FD-L-1 NC3FD-L-1-BAG NC3FD-L-1-B 3 NC3FD-L-1-0 NC3FD-L-1-BAG-0 N/A 4 NC4FD-L-1 NC4FD-L-1-BAG NC4FD-L-1-B 5 NC5FD-L-1 NC5FD-L-1-BAG NC5FD-L-1-B 6 NC6FD-L-1 NC6FD-L-1-BAG NC6FD-L-1-B 6* NC6FDS-L-1 N/A NC6FDS-L-1-B 7 NC7FD-L-1 NC7FD-L-1-BAG NC7FD-L-1-B DM3 Series Featuring 4 or 5 pin PCB mount horizontal (right angle) or vertical contacts. One piece unit allows male and female to mount in same hole cutout. Rear mountable only. Available accessories are the same as for the "D-L-1" series (see page 39). O R D E R I N G I N F O R M AT I O N - " D M 3 " S e r i e s M a l e # of Nickel Shell Black Chrome Shell Contacts Silver Contacts Termination Black Plastic Shell Silver Contacts 4 NC4MDM3-H NC4MDM3-H-BAG PCB Mount Horizontal (Rt. Angle) NC3MPP 5 NC5MDM3-H NC5MDM3-H-BAG PCB Mount Horizontal (Rt. Angle) O R D E R I N G I N F O R M AT I O N - " P P " S e r i e s F e m a l e 5 N/A NC5MDM3-V-BAG PCB Mount Vertical # of Contacts 3* Black Plastic Shell Silver Contacts O R D E R I N G I N F O R M AT I O N - " D M 3 " S e r i e s F e m a l e NC3FPP # of Nickel Shell Black Chrome Shell Contacts Silver Contacts * Females available w/ 4-7 contacts in US only. Minimums may be required. Contact Neutrik USA, Inc.(R) for details. Termination 4 NC4FDM3-H NC4FDM3-H-BAG PCB Mount Horizontal (Rt. Angle) 5 NC5FDM3-H NC5FDM3-H-BAG PCB Mount Horizontal (Rt. Angle) 5 N/A NC5FDM3-V-BAG PCB Mount Vertical Special orders may be available. Minimums required. Contact Neutrik USA, Inc.(R) before ordering. -0 = Latchless retention spring instead of "push" tab. *Switchcraft(c) equivalent Parts may also be available with M3 threads. Minimums may be required. Contact Neutrik USA, Inc.(R) before ordering. 732-901-9488 12 www.neutrikusa.com 13 XLR Receptacles "P" SERIES Specifications "D-L-1" SERIES "PP" SERIES "D" SERIES Jacks and Plugs "DM3" Electrical Number of contacts: * Female: 3-7 3-7 3* 3 only 4-5 * Male: 3-6 3-7 3 only 3 only 4-5 Rated Current: See table on page 8 X X X 6A X Rated voltage: 250 V ac X X X X X Contact resistance: 5 m X X X X X X X X X X Insulation resistance * Initial: >2G * after damp heat test: >1G Dielectric strength: 1500 V dc NJ3FP6C Series X X X X X X X X X X Mechanical Insertion / withdrawal force: 20N / 10N X X X X X Max. wire size: See table on page 6 X X X "-L" version only N/A Retention method (Female versions only): * Standard: latch lock X X N/A X X N/A X X X N/A X X X X X Temperature range: -30C to +80C X X X X X Flammability: UL 94HB X X X X X Solderability: Complies with IEC 68-2-20 X X X X X Shell: ZnAlCu1, gal Ni or black chrome plating X X X ZnAl4Cu1 X Insert: PA 6.6 30% GR (Glass Reinforced) X X X X X * female (3-pole): CuSn6 X X X X X * female (4-7-pole) & male: CuZn39Pb3 X X X X X X X N/A X X * "-O" version: retention spring (3 pin female only) Separating force: 20N NJ3FC6 Series This series of panel mount locking 1/4" chassis jacks with solder terminations is made to mount in the same hole cutout out as our "D" and NL4MP series of panel mount receptacles. Options include a plastic shell and FastOn(R) solder tabs versions. Contact factory for ordering information. O R D E R I N G I N F O R M AT I O N - " N J 3 F P 6 C " S E R I E S # of Nickel Shell Black Chrome Shell Plastic Shell Contacts Silver Contacts 3 NJ3FP6C NJ3FP6C-BAG NJ3FP6C-P This series features the NEUTRIK(R) innovation of a securely locking 1/4" cable jack with latch release. Mates with all mono or stereo plugs specified to EIA RS-453. Able to handle cable OD up to 8mm. O R D E R I N G I N F O R M AT I O N - " N J 3 F C 6 " S E R I E S # of Contacts 3 Nickel Shell Black Chrome Shell Silver Contacts Contacts NJ3FC6 NJ3FC6-BAG TRS Contacts TRS Environmental Materials Contacts: NJ*FD/TB-V Series Contact surface (over 2m Ni): * Gold: gal 0.2 m Au hard alloy * Silver: gal 2m Ag Latch lock & spring: Ck 67 steel, treated X X X X X X X N/A X X *Females available in 4-7 pins in US only. Call Neutrik USA, Inc.(R) for details. Minimums may be required. Vertical mounting PCB jacks come in either standard 1/4" (FD) or long frame mil gauge (TB) versions. These jacks feature a snap on/twist off cap which drastically reduces assembly times. The retention force is provided by a special spring element which is independent of the contacts. Compact design allows more jacks in less space. O R D E R I N G I N F O R M AT I O N - N J * F D / T B - V S e r i e s Ve r t i c a l J a c k s # of Contacts STD 1/4" Gold Contacts MIL Gauge Gold Contacts Contacts 2 NJ2FD-V N/A TS 3 NJ3FD-V N/A TRS 5 NJ5FD-V N/A T,TN,R,RN,S 6 NJ6FD-V NJ6TB-V T,TN,R,RN,S,SN NOTE: Additional 1/4" jacks can be found in the NYS Series Product Guide 732-901-9488 14 www.neutrikusa.com 15 Jacks Specifications NJ3FC6 SERIES NJ3FP6C SERIES Jacks and Plugs NJ*FD/TB-V SERIES Electrical Rated current: 10 A X X 3A N/A N/A 0.25 A @ 12 V * Initial: <6 m X X <10 m * After life test: <15 m X X <20 m * Initial: >2G X X >1G @ 500 v dc * After damp heat test: >1G X X X N/A N/A <15 m X X 1000 V dc Life: >10,000 cycles X X X Insertion/Withdrawal force: <19N / <22N X X <10N / >8N Locking force: >80N X X N/A Rated current switch contact Contact resistance: Insulation resistance Rated switch contact resistance: Dielectric strength: 1.5 kV dc Mechanical 2 Wire size: 1 mm / 18 AWG max for soldering tag Cable O.D.: 3.5 mm - 8.0 mm X X N/A X N/A N/A Cap opening torque: 25N cm / 9.84N in N/A N/A X Panel thickness N/A N/A 1.2 - 1.5 mm (0.047 - 0.06") 1/4" Plugs NP*C Series These 1/4" professional phone plugs are available in mono (2 contacts/TS) or stereo (3 contacts/TRS), according to EIA RS453. Features include a diecast metal shell and unique NEUTRIK(R) chuck type strain relief. Straight and right angle versions available. BSP boots and PCR rings offered for color coding (see page 39). NP*RCS A slim right angle version of our standard 1/4" professional phone plug. The NP*RCS versions feature a narrow profile and a solder or solderless ground wire. BSP boots offered for color coding (see page 39). O R D E R I N G I N F O R M AT I O N - M o n o ( T S ) 1 / 4 " P l u g s Environmental Temperature range: -20C to +65C X X X # of Contacts Solderability: Complies with IEC 68-2-20 X X X Materials Shell: ZnA/4Cu1 nickel plated or black chrome PA 6.6 30% GR NP2C-B TS 2 N/A NP2C-BAG-D* N/A TS NP2C-T10AA NP2C-T10AA-BAG N/A NP2L NP2L-BAG N/A TS N/A X X 2 NP2RCS N/A N/A TS X X N/A N/A N/A 0.2 m Au over 2 m Ni X N/A N/A N/A N/A X X N/A N/A Applicable Standard Compability B Gauge BPO316 / MIL-J-641/3 NP2C-BAG 2 X EIA RS 453 NP2C 2 X Bushing: PA 6.6 15% GR + PUR Contacts 2 N/A X Cap: POM Black Chrome Shell Nickel Contacts Gold Contacts X Contacts: CuBe2 / CuZn37 (ground) 2 m Ag plated Chuck: POM Nickel Shell Nickel Contacts X Insulation: PA 6.6 30% GR CuSn6 Military Gauge Series X X NJ*FD-V N/A N/A NJ*TB-V NEUTRIK(R) offers a variety of plug fingers to meet mil spec applications. All versions feature a metal shell in black (-B) or red (-R) and unique NEUTRIK(R) chuck type strain relief. Assembly is quick with no rivets or screws to worry about. O R D E R I N G I N F O R M AT I O N - M i l G a u g e S e r i e s # of Contacts Coated Brass Shell Silver Contacts Mil. Gauge Spec Diameter Contacts 3 NP3TB-B or -R BPO 316 .250" TRS 3 NP3TM-B or -R 642/2 .250" TRS 2 NP2CM-B or -R # 642/4 .250" TS 3 NP3CM-B or -R # 642/5 .206" TRS # Also available as plug fingers only in Nickel or Brass for overmolding. TS** **W/ 1:10 transformer to convert mic level to guitar inputs NP3TT Series ORDERING INFORMATION - Stereo (TRS) 1/4" Plugs # of Contacts Nickel Shell Nickel Contacts Black Chrome Shell Nickel Contacts Gold Contacts Contacts 3 NP3C NP3C-BAG NP3C-B TRS 3 NP3C-D* NP3C-BAG-D* N/A TRS 3 NP3RCS N/A N/A TRS *Bulk packaged - must be ordered in multiples of 100 These bantam size (4.4mm/0.173") miniature stereo plugs have recently been redesigned to be crimped with any standard RG58 crimp tool. The gold contact version when used with our NJ3TTA jacks (see page 31) eliminates mating problems due to corrosion or dirt. O R D E R I N G I N F O R M AT I O N - " N P 3 T T " S e r i e s # of Contacts Plastic Sleeve Silver Contacts Gold Contacts Sleeve Color Contacts 3 NP3TT-P-B NP3TT-P-B-AU Black TRS 3 NP3TT-P-R NP3TT-P-R-AU Red TRS 3 NP3TT-2 N/A Black TRS NOTE: Additional 1/4" plugs can be found in the NYS Series Product Guide 732-901-9488 16 www.neutrikusa.com 17 Plugs Specifications Combo NP2C SERIES NP3C SERIES NP*RCS SERIES MIL GAUGE SERIES NP3TT SERIES Rated current: depends on mating connector X X X X X Contact resistance: depends on mating connector X X X X X * Initial: >2G X X X X X * After damp heat test: >1G X X X X X X N/A 2 pole X N/A N/A X 3 pole N/A X X X X X Tip & ring Solderless ground N/A N/A X N/A N/A Sleeve: HEX crimp (5.4 mm) acc. to IEC 803 N/A N/A N/A N/A X X X X X 0.25 mmm2 / 24 AWG N/A N/A N/A NP3CM N/A X X X X 4.8 mm NP2L N/A N/A N/A N/A Electrical Insulation resistance: Dielectric strength: * 1.5 kV dc * 1 kV dc Mechanical Wiring: solder terminals Wire size: 1 mm2 / AWG 18 0.5 mm2 / AWG 20 Cable O.D.: 4 - 7 mm 8 mm / .315" Environmental Temperature range: -20C to +65C X X X X X Solderability: complies With IEC 68-2-20 X X X X X Materials Shell: ZnAl4Cu1, Ni or black chrome plated Combo In the past consoles and amplifiers were furnished with two input receptacles per channel: a balanced 3 pin female XLR receptacle and a 1/4" phone jack. In the majority of cases, only one input was used at one time. Keeping with the NEUTRIK(R) view of innovation, the Combo connector was born - a combined XLR female 3 pin receptacle and 1/4" phone jack in one! This unique connector accepts balanced and line inputs or instrument inputs-all in one unit of panel space! COMBO Series Specifications Electrical Number of contacts: 3 XLR; TRS, G, TN, RN, SN & optional switched XLR grd contact (GN) Rated current: XLR=7.5A Rated voltage: 125 V ac Jack contacts=3A Contact resistance: * XLR: <10 m Insulation resistance: * After damp heat test: >0.5G * Jack: <20 m The Combo is now more compact and cost effective than ever. In response to customer feedback, a solder cup version has been added. The standard vertical and horizontal PCB terminations have new and improved contacts. Dielectric strength: 1500 V dc Capacitance: >2pF The 1/4" jack is available in mono, stereo, or stereoswitching. Another new feature is the availability of a switching XLR ground contact. The jack retention force is delivered by a special element which is completely separate from the jack. Engagement / separation force: Temperature range: -20C to +66C Available in locking (latching) or non-locking (latchless) versions, the Combo is digital capable due to the low capacity of the conductors. Flammability: UL94HB Solderability: Complies with IEC 68-2-20 Mounting Screws - use part # Screw-2.9m Shell: Mechanical * XLR: <10N / >15N * Jack: <15N / >15N X X Ni plated only N/A N/A PA 6.6 50% GR N/A N/A X N/A N/A PA 6.6 30% GR N/A N/A N/A N/A X Brass CuZn 39 Pb3, black/red coated N/A N/A N/A X N/A Insulation: PA 6.6 30% GR X X X X X Contacts: CuZn39Pb3, 2m Ni (Su) plated X X X X X NP2C-B N/A N/A N/A N/A CuSn6, 2m Ni (SU) Plated N/A N/A N/A N/A X Contacts: * Jack and XLR: CuSn6 2m TRIBOR (NiP-AuCo) N/A N/A N/A N/A X Contact plating: Chuck: POM X X X X N/A * XLR and switch contacts: galv. Au * Jack and ground: galv. Ag Bushing: POM + PU X X X N/A N/A CuZn39Pb3, 0.2m Au Environmental Materials Polyamid, PA 6.6 30% GR O R D E R I N G I N F O R M AT I O N - C o m b o S e r i e s Combined XLR Receptacle and 1/4" Phone Jack Description Horizontal PCB Vertical PCB Solder Cups Jack Contacts 3 pole female XLR / nonswitching mono-jack NCJ5FI-H NCJ5FI-V NCJ5FI-S T,S,G 3 pole female XLR / nonswitching stereo-jack NCJ6FI-H NCJ6FI-V NCJ6FI-S T,R,S,G 3 pole female XLR / switching (normalling) stereo-jack NCJ9FI-H NCJ9FI-V NCJ9FI-S T,R,S,G,TN,RN,SN, 3 pole female XLR / switching ground and stereo-jack NCJ10FI-H NCJ10FI-V NCJ10FI-S T,R,S,G,TN, RN, SN, GN Add "-O" as suffix to any part for latchless version (retention spring instead of "Push" Tab). i.e. NCJ6FI-H-0 732-901-9488 18 www.neutrikusa.com 19 Speakon Speakon (R) (R) Wiring Suggestions Positive signal on speaker pin "+" produces positive waveform from driver (moves cone outwardly) "+" = In phase (high) "-" = Ground (out of phase, low) Lower numbers for lower frequencies Amplifier Cable Speaker Stereo ("HiFi") One NL4MP socket left channel pins 1+/1right channel pins 2+/2- NL4FC on amplifier end, four conductor cable splits into two pairs with NL4FC on each end one NL4MP per speaker left speaker pins 1+/1right speaker pins 2+/2- POWER ("PA") Standard three NL4MP socket "A" socket: left channel pins 1+/1"B" socket: right channel pins 1+/1- A two-conductor cable for each channel with NL4FC on both ends NL4MP pin 1+ to speaker coil "+" NL4MP pins 1- and 2+ to speaker coil "-" Bridged mono "M" socket: left channel pins 1+/1right channel pins 2+/2- A special two conductor cable, on both ends wired to pins 1+/2+ of NL4FC NL4MP pin 1+ to speaker coil "+" NL4MP pins 1- and 2+ to speaker coil "-" Bi-Amp one NL4MP socket low frequency pins 1+/1high frequency pins 2+/2- a four-conductor cable on both ends wired to pins 1+/1-, 2+/2- of NL4FC one NL4MP socket low frequency pins 1+/1high frequency pins 2+/2- (R) Speakon(R) 2-Pole Speakon(R) 4-Pole Cable and Adapters Schematics available online - www.neutrik.com in the FAQ section - or by fax from Neutrik USA, Inc.(R) Neutrik has added to the Speakon(R) line with the 2002 introduction of the STX and SPX series. Information is available on a separate brochure or on our website - www.neutrikusa.com - or contact Neutrik USA, Inc.(R) for details. Speakon(R) 8-Pole Speakon(R) 4-Pole Chassis Speakon(R) is not to be used as a "main" (AC) connector. Speakon(R) This series of professional speaker and amplifier connectors is recognized as the industry standard. The Speakon(R) product line features 2, 4 and 8 pole versions. Patent protected, reliable, cost effective, and extremely durable the Speakon(R) system offers the "quick lock" locking system and recently redesigned inserts on its cable ends. The inserts feature solderless connections using new pozidrive and slot combination screw terminals with a captivated pressure plate. No special tools are required making these connectors 100% field repairable. We do offer a screwdriver as an accessory - use part # SD-NLP for your convenience. Type Terminations Description 2 pole 4 pole 8 pole Cable Screw Screw quicklock feature with quicklock feature & gold contacts - all black body NL2FC N/A NL4FC NL4FC-B NL8FC N/A Chassis Solder / Faston Solder / Faston Solder / Faston Solder / Faston Solder / Faston Solder / Faston Vertical PCB Vertical PCB Vertical PCB Vertical PCB Vertical PCB Vertical PCB Horizontal PCB Horizontal PCB Horizontal PCB Horzontal PCB Solder / Faston Screw airtight - square flange airtight - square flange - mounting holes in opposite corners airtight - square flange & gold contacts airtight - round flange - all plastic airtight - round flange - nickel bezel airtight - round flange - black chrome bezel airtight - square flange airtight - square flange - grey housing - mtg holes for self tapping screws airtight - square flange - mounting holes in opposite corners airtight - round flange - all plastic airtight - round flange - nickel bezel airtight - round flange - black chrome bezel airtight - square flange airtight - square flange - mounting holes in opposite corners airtight - round flange - nickel bezel airtight - round flange - black chrome bezel airtight - handles 40A for audio or 50A for audio w/2 contact load airtight - no special tools required - ideal for field applications NL2MP N/A N/A N/A N/A N/A NL2MD-V N/A N/A N/A N/A N/A NL2MD-H N/A N/A N/A N/A N/A NL4MP NL4MP-2 NL4MP-B NL4MPR N/A N/A NL4MD-V NL4MD-V-1 NL4MD-V-2 NL4MPR-V N/A N/A NL4MD-H NL4MD-H-2 N/A N/A NL4MP-UC NL4MP-ST N/A N/A N/A N/A NL8MPR NL8MPR-BAG N/A N/A N/A N/A NL8MD-V NL8MD-V-BAG N/A N/A NL8MD-H NL8MD-H-BAG N/A N/A Boot drip boot for wet environments - use with NL4FC N/A BSL-WR N/A Adapter coupler for cable extensions 4 pole Speakon to 1/4" - connects +1 to Tip, -1 to Sleeve NL4MMX NA4LJ NL4MMX NA4LJ NL8MM N/A Accessories Mounting screws to mount chassis connectors to panel 4.8mm x 0.5mm tab for use with solder type receptacles Screw-2.9m NL-FASTON Screw-2.9m NL-FASTON Screw-2.9m NL-FASTON Speakon(R) panel receptacles with solder terminations also allow you to use quick disconnect type terminals (Faston(R)) for easy and reliable assembly. These quick disconnects can be ordered from Neutrik USA, Inc.(R) - use part # NL-FASTON. Speakon 4 pole receptacles are available with PCB vertical and horizontal terminations or screw terminals. A new increased current version is also available. OEM specials maybe available, please contact Neutrik USA, Inc.(R) for details. The contacts in this series are touch proof and designed to prevent damage from arcing if disconnected under load. Ensuring fail safe conditions for both the equipment and the operator, Speakon(R) meets the prevailing safety standards of IEC65, IEC348, CE, CSA and are UL rated (file #E135070). 732-901-9488 20 O R D E R I N G I N F O R M AT I O N - S p e a k o n (R) www.neutrikusa.com 21 SPEAKON Series (R) Specifications PowerCon NL*FC NL*MP NL*MPR NL*MD X X X X N/A (R) Electrical Rated current/contact: 30A rms continuous / 40A rms 1 minute N/A NL4MP-UC N/A Dielectric Strength: 4KV peak 50A rms continuous for audio signal w/2 contacts X X X X Rated voltage: 250V ac (Speakon is not to be used as an AC mains connector) X X X X X X X X Contact resistance: <3 m after 5,000 insertion/withdrawals <10 m after 5,000 insertion/withdrawals NL4MD-H Insulation resistance: 250 V ac initial: >2G X X X X after damp heat test: >1G X X X X Inrush/outrush current capability (12v source): 300/30 A/200 ms X X X X Creepage distance is according to IEC 664-1 X X X X Mechanical Retention method - quicklock with latch X N/A N/A N/A Cable anchoring - Neutrik chuck principle X N/A N/A N/A 6 - 10 mm NL2FC N/A N/A N/A 6 - 15 mm: white chuck (6 - 11mm); black chuck (9.5 - 15mm) NL4FC N/A N/A N/A 8 - 20 mm: w/reducing sleeve (8 - 15mm); w/o sleeve (15 - 20mm) NL8FC N/A N/A N/A Cable OD range: Cable retention force of >220N is subject to cable diameter & material X Wiring: chassis: solder = flat tabs for Faston 4.8mm x 0.5mm (.187") N/A X X N/A chassis: solder = flat tabs for Faston 6.3mm x 0.8mm (.25") N/A NL4MP-UC N/A N/A chassis: PCB pins 1.6mm x 0.5mm N/A N/A NL4MPR-V X chassis: screw terminals - 4mm2 / AWG12 N/A NL4MP-ST N/A N/A Material Contacts: CuZn39Pb3/CuSn8 4um Ag plated Securing element: ZnAl4Cu1, Ni plated Spring element: Neoprene ring PowerCon(R) X X X X X X X X N/A PowerCon(R) is a lockable 3 pole equipment (AC) connector with contacts for line, neutral, and premating safety grounds. It is rated at 20A/250V ac. Color coded for easy identification, PowerCon(R) offers power-in (blue) and powerout (grey) versions with different keying to avoid the possibility of short circuiting. The contacts are designed to prevent damage from arcing when disconnected while under load. PowerCon(R) is not designed to be a "mains" connector or for speaker/amplifier applications. For speaker/applications please see Speakon on pages 20-22. This series of connectors is rugged and reliable and is UL recognized, SEV and VDE approved and meets prevailing safety standards. The cable ends use the "quick-lock" latch for fast and easy locking. PowerCon(R) inserts feature solid contacts with screw type terminals. No special assembly tools are required. The chassis connectors have large solder tabs which accept FastOn(R) type quick disconnects for even easier hard wiring. PowerCon(R) meets or exceeds the demands of applications in the fields of A/V usages, test and measurement equipment, computers, or industrial designs. O R D E R I N G I N F O R M AT I O N - P o w e r C o n (R) Description Housings: PA 6 30% GR X X Insert: PBTP 20% GR NL4MD (all) X N/A NL8MPR (all) N/A NL8MD (all) Boot: PA 6 15% GR X N/A Chuck: POM X Temperature Range = -30 C to +80 C X Cable connector, quick lock with securing lever NAC3FCA NAC3FCB N/A Chassis connector, air tight NAC3MPA NAC3MPB N/A N/A N/A N/A N/A X X X Coupler for linking cables (Couples NAC3FCA to NAC3FCB) ZnAl4Cu1, Ni or black chrome plated 732-901-9488 22 NL4MPR (all) Part # A-type: for power in B-type: for power out (Blue) (Gray) NAC3MM POWERCON(R) Specifications UL-Recognized (E 135070) VDE rated (6360) SEV approved (No. 96.1 10096) Electrical Number of contacts: 3 Rated current/contact: 20 A rms @ wire size 2.5 mm2 Rated Voltage: 250 V ac Contact resistance after 5000 insertion-withdrawal operations: 3 m Insulation resistance: * Initial: >2G Creepage distance: according to IEC 664-1 Safety ground: Premating Dielectric strength: 4 KV peak * After damp heat test: >100M Mechanical Wiring: * Cable: * Chassis: screw-type terminals or soldering Max wire size/contact: 4 mm2 / 12 AWG (stranded) flat tabs for FASTON(R) 0.187" x 0.02" (4.8mm x 0.5mm) or soldering Cable OD range: * White chuck: * Black chuck: 5-15mm 5mm (.19") - 11mm (.433) 9.5mm (.374") - 15mm (.787") Cable anchoring: NEUTRIK(R) chuck principle Cable retention force: 220N, depending on cable diameter and material Retention method: Quicklock with securing lever Environmental Temperature range: -30C to +80C Materials Housing: PA 6 30% GR Insert (FC part): PBTB 20% GR Bushing: PA 6.6 15% GR Chuck: POM Contact: CuZn39Pb3 / CuSn8, 4m/20mm Ag plated Securing lever: ZnAl4Cu1, CuNi plated www.neutrikusa.com 23 Miniature Circular Connectors Miniature Circular NanoCon(R) NanoCon(R) is the smallest - measuring just 0.236" in diameter x 1.22" (6mm x 31mm) - lockable multi-pin connector in the world! Another member of the Neutrik(R) family of miniature circular connectors, NanoCon(R) offers a selective load of 1 - 3 gold contacts in mating cable ends, PCB vertical or horizontal male and female receptacles, or male and female solder termination receptacles. The machined metal nickel plated housings hold inserts which contain machined gold contacts. Pin #1 mates first, breaks last. Panel receptacles with blank inserts, mating cable ends with interchangeable inserts and fully loaded PCB receptacles are available. Neutricon(R) The NanoCon(R) cable connectors utilize the unique Neutrik(R) chuck type strain relief and all housings have polarizing guides for ease of assembly and then mating. These micro connectors are manufactured without jeopardizing quality or reliability. The versatility of the NanoCon(R) system allows them to be used in a variety of audio and industrial applications such as wireless mics, control systems, or PCB interface cards. Neutricon(R) is a modular system with a minimum of parts offering the user a maximum of variations. The male and female inserts can be selectively loaded with 1 - 8 gold contacts for solder, crimp (according to MIL-C22520F) or PCB vertical terminations. The cable connectors utilize the unique Neutrik(R) chuck type strain relief, will accommodate cable diameters of 3-7mm, and are equally suitable for flat ribbon cables. Additional crimp ferrules for coaxial shield terminations are available as an option. Assembly is quick and easy and requires no screws. Your choice of a nickel or black chrome plated receptacle or cable end housing absorbs vibrations and mechanically protects the contacts. These housings offer 90 or 180 polarizing guides to fit your application needs. The Neutricon(R) non-threaded, self-activating, push-pull locking system is vibration proof. A splash proof version (per IP65) is available, just contact Neutrik USA, Inc.(R) for the details. Color coded boots (use part # BSP-color - see page 39) are an optional accessory. O R D E R I N G I N F O R M AT I O N - N e u t r i c o n (R) O R D E R I N G I N F O R M AT I O N - N a n o C o n (R) O R D E R I N G I N F O R M AT I O N - N a n o C o n (R) Cable Connectors Receptacles Female Male Description Female Male Cable housing - nickel with boot & chuck NSC NSC Receptacle housing with insert - must order contacts NR3F NR3M Insert - unloaded must order contacts separately NF3 NM3 Solder contacts - gold NBS NPS Receptacles Description Female Male Description Female Cable housing, Nickel# SC-8Ni SC-8-Ni Housing, Nickel# RP-8Ni RP-8Ni Cable housing, Black Chrome# SC-8 SC-8 Housing Black Chrome# RP-8 RP-8 SR-8 SR-8 Inserts FI-8 MI-8 SR-8A / 3-3.8mm SR-8B / 6-7mm SR-8A / 3-3.8mm SR-8B / 6-7mm Contacts * Solder * Crimp * PCB (vertical) * Blank BS1 BC1 BP1 BB1 PS1 PC1 PP1 N/A Solder contacts - gold NBS NPS Receptacle - vertical PCB mount - complete with contacts NP3F-V NP3M-V Mating cable housing - nickel with boot & chuck NMC NMC Receptacle - horizontal PCB mount - complete with contacts NP3F-H NP3M-H Inserts FI-8 MI-8 Contacts * Solder * Crimp * Blank BS1 BC1 BB1 PS1 PC1 N/A NBS Housing NF3 NSC NPS NBS NPS NM3 MC-8 MC-8 Cable housing boot for color coding BSP-* BSP-* For additional Ordering Information please go to www.neutrik.com in the TECHNICAL SUPPORT section under ASSEMBLIES NP3F-V NP3F-H NP3M-V NP3M-H NR3M 732-901-9488 24 Mating Cable End - Cable Housing# * Available in ten resistor colors (see page 39). Must order w/ SR-8 for strain relief. NR3F Male Strain relief & Boot Strain relief & Boot w/ crimp ferrule for coaxial grounding Insert O R D E R I N G I N F O R M AT I O N - N e u t r i c o n (R) Cable Connectors Description Contacts Connectors # Available in 90 or 180 polarization. 180 version is standard. Add "-1" as suffix for 90 version. Polarization Shell: Two variations of metal polarizing guides (180 / 90) 180 SC-8 MC-8 RP-8 90 SC-81 MC-81 RP-81 www.neutrikusa.com 25 Miniature Circular Connectors Miniature Circular Connectors Specifications NanoCon(R) Neutricon(R) MiniCon(R) Electrical MiniCon(R) MiniCon(R) is a compact miniature circular connector of modular design. It offers a select load combination of contacts from 1-12. Offering a precisely machined, rugged, all metal design, MiniCon(R) features fully loaded male and female PCB horizontal or vertical receptacles, male and female receptacles for crimp or solder contacts and a cable housing with optional crimp ferrules for coaxial shield terminations. The cable connectors accept a wide range of cable diameters (2-7mm) and cable protection is afforded by the unique Neutrik(R) chuck type strain relief. O R D E R I N G I N F O R M AT I O N - M i n i C o n (R) Assembling the inserts is quick as the contacts "snap in" to place from the rear. Loaded inserts are seated into their housings correctly every time using the Neutrik(R) keying method. Once assembled, it is the push-pull locking system that mates these connectors. Pin #1 makes ground first, breaks last. The MiniCon(R) system is extremely cost effective and fits a wide variety of applications in the medical, instrumentation, industrial, and audio fields. O R D E R I N G I N F O R M AT I O N - M i n i C o n (R) Cable Connectors Receptacles Female Male Description Female Male Cable housing (including chuck and boot) MSC MSC MRF MRM Insert MFI MMI Receptacle housing with insert must order contacts separately MBC MBS MPC MPS Contacts: 1-12 contacts user selectable - crimp - solder MBC MBS MPC MPS PCB receptacle (12-pole) Completely assembled - Vertical - Horizontal MPF12-V MPF12-H MPM12-V MPF12-H - crimp - solder Accessories - Set of strain relief crimp ferrules, for Cable OD: MSRC 2.5 - 3.2 mm 3.3 - 4.4 mm 4.5 - 6.0 mm Includes boot with larger rear cable opening Contacts Inserts MMI MPC MPS Solder or Crimp MIL MBC MBS Housing 1-3 1-8 1-12 Rated current/contact: 2A solder - 7.5 A crimp - 5 A 3A Rated Voltage: 75 V ac 125 V ac 125 V ac Contact resistance: <8 m <2 m <6 m Insulation resistance after damp heat test: >2G >0.5G >0.5G Dielectric strength: 1.5 Kv dc / 1.06 kV rms 1,500 v dc 1.01 Kv dc / 0.71 Kv rms Mechanical Maximum wire size: * Solder: * Crimp: 0.20 mm2 / AWG 24 (solid wire) 1.0 mm2 / 18 AWG 2 0.14 mm / AWG 26 (stranded wire) 0.14 - 0.34 mm2 / 22 - 26 AWG 0.50 mm2 / 20 AWG 0.22 mm2 / 24 AWG Cable Anchoring: NEUTRIK(R) chuck principle X X X Cable OD range: 3.4 mm max 3 - 7 mm SR8A: 3 - 3.8 mm SR8B: 6 - 7 mm gray chuck: 2 - 5 mm white chuck: 5 - 7 mm crimp contact: 2.5 - 6 mm Cable retention force: <100N for 3 mm Cable <150N for 5 mm Cable <150N for 5 mm Cable Retention method: self-locking X X X Protective system (mated): IP50 X X (higher classes on request) X Life time: >1000 cycles X X X Male contact diameter: 0.5 mm 1 mm 0.8 mm Environmental Description Contacts: 1-12 contacts user selectable Number of contacts: user selectable Temperature range: -30C to +80C X X X Solderability: complies with IEC 68-2-20 X X X Insert flammability: UL 94HB UL 94V-0 X UL 94V-0 CuSn4Pb4Zn4 (cable connector) CuZn39Pb2 (receptacle) X X ZnAl4Cu1, gal Cu/Ni (+ black chrome) ZnAl4Cu1, gal Cu/Ni (+ black chrome) CuZn35Pb3 / ZnAl4Cu1satin chromium plated satin chromium plated Insert: PETP PBTB 15% GR PA 6.6 Chuck: POM X X X Bushing: BRASS POM + PUR BRASS Contacts: Contact surface: CuZn35Pb2 0.5 m Au CuZn39Pb3 / CuZn35Pb2, 0.3 m hard gold over Ni CuZn39Pb3 / CuZn35Pb2 / CuSn6 0.2 m AuCo plated Materials Housings cable & receptacle MSC MFI Crimp Set: Crimp ferrule for coaxial shield termination: MSRC 732-901-9488 26 www.neutrikusa.com 27 Profi Patch (R) Profi(R) You will not find a higher quality RCA plug. The Neutrik(R) Profi(R) professional phono plugs are precisely machined to our highest standards. Featuring a retractable sleeve, the Profi(R) connectors makes ground before signal contact and breaks signal before ground. This "makes first, breaks last" feature means you can eliminate unwanted noise and broken speaker cones when used under load. In addition, Profi(R) offers the Neutrik(R) unique chuck type strain relief (includes two sizes for different diameter cables) and gold plated contacts as standard. They arrive in pairs marked red and black for right and left channel. Patch Cord Assemblies P ro f i (R) S p e c i f i c a t i o n s Electrical Rated current: 16 A Rated voltage: 250 V ac Insulation resistance: >100G Capacitance (pin to shell): 7 pF Dielectric strength: 1500 V dc Mechanical Max. wire size: 2.5 mm2 / 14 AWG Cable anchoring: NEUTRIK(R) chuck principle Neutrik(R) utilizes the highest quality craftsmanship and materials to bring you our line of professional TT and TB patch cables. cable. Our TT patch cords are offered in five colors (red, black, blue, yellow, and green) that are matching between cord and plug sleeve for easy identification. Our TT patch cords are made with a flexible yet durable cable that is manufactured using our own nickel plated TT plugs (gold plugs are also available). Neutrik(R) was the first worldwide to provide nickel plating as standard to help eliminate problems of corrosion and tarnish build-up. Each TT plug has a hex crimped strain relief to provide the ultimate in stress protection for the solder joints and actual The NEUTRIK(R) professional TB (1/4" long frame) patch cables feature the same craftsmanship and attention to details as our TT cords. Standard features include an all metal black or red body with color matched cable, unique NEUTRIK(R) chuck type strain relief, and nickel plated contacts. Using a flexible long lasting cable you are assured of NEUTRIK(R) quality with each use. O R D E R I N G I N F O R M AT I O N - T T P a t c h C o rd s Bantam style (0.173") Cable OD range: O R D E R I N G I N F O R M AT I O N - P ro f i (R) Description Packaged in pairs - each marked red & black for right & left channels. Includes 2 strain reliefs for different diameter cables. Custom orders and packaging may be available. Please contact Neutrik USA, Inc.(R) for details. Part # NF2CB//2 O R D E R I N G I N F O R M AT I O N - T B P a t c h C o rd s (1/4") TB-style (B Gauge BPO 316) * blue chuck: 3.0 - 5.5 mm Part # Length* 1/4" Long Frame Length* * black chuck: 5.5 - 7.3 mm NKTT03-# 1' NKTB03-# 1' NKTT04-# 18" NKTB04-# 18" NKTT05-# 2' NKTB05-# 2' NKTB1-# 3' Environmental Temperature range: -30C to +80C NKTT1-# 3' Solderability: complies with IEC 68-2-20 NKTT12-# 4' NKTT2-# 6' Materials Shell: Brass CuZn39Pb3 black coated Insulator: PBTP Chuck: Polyacetal POM Contact pin: Brass CuZn39Pb3 / 0.5 m Au plated Ground contact: Brass CuZn39Pb3 / 0.5 m Au plated over 5 m Ni 732-901-9488 # Available in BLK=Black or R=Red # Available in BLK=Black, GN=Green, R=Red, Y=Yellow, BL=Blue NOTE: *Custom lengths available upon request. Minimum quantity of 20 per length & color. Contact Neutrik USA, Inc.(R) for details. T E C H N I C A L D ATA - P a t c h C o rd A s s e m b l i e s Plug Stranding Size (awg 24) inch 28 Cables mm Insulation Thickness Jacket Thickness Nominal O.D. Capacitance Cond. To Cond. Capacitance Shield to Cond. Shield inch mm inch mm inch mm pF/ft. pF/m pF/ft pF/m inch TT 60 x 0.0028 60x0.07 0.008 0.2 0.028 0.7 0.18 4.6 + 0.2 40pF/ft 120pF/m 66pF/ft 200pF/m 60 x 0.001 60 x 0.12 TB 28 x 0.039 0.01 0.25 0.063 1.6 0.25 6.5 + 0.2 53pF/ft 160pF/m 93pF/ft 280pF/m 85 x 0.039 85 x 0.1 28x0.17 mm www.neutrikusa.com 29 EasyPatch Patch Panels EasyPatch Patch Panels O R D E R I N G I N F O R M AT I O N - N P PA - T T S e r i e s Type No. NPPA-TT-PT-PH Patch panel, 2x48 jacks, half normalled, 288 push terminals for easy wiring. NPPA-TT-E56 Patch panel, 2x48 jacks, half normalled, 6x56 pole ELCO male connectors. NPPA-TT-S Patch panel, 2x48 jacks, half normalled, 288 solder terminals for fixed installations. O R D E R I N G I N F O R M AT I O N - P re - C o n f i g u re d J a c k - P a i r s The Easy-Patch is a compact, low cost patching system 1U high and only 7" deep - for 19" rack mounting and can GROUNDING OPTIONS The flexible grounding system provides the following alternatives: Individual: Each channel is individually grounded through its cable shield. Group: Selected channel grounds are connected via the bus PCB using solder bridges and track cuts to form a group that is connected to one common cable shield. Central: All channel grounds (individual top and bottom row) are connected via the bus PCB using solder bridges and wired with only one cable shield. Chassis-Common: The same as central grounding but with the addition of the common ground (top and/or bottom rows) connected to the patch panel chassis by means of jumpers. Blocks of 2 channels; half normalled bottom row; cover ident color: clear NJ3TTA-4-HNT Blocks of 2 channels; half normalled top row; cover ident color: yellow NJ3TTA-4-FN Blocks of 2 channels; full normalled bottom row; cover ident color: green NJ3TTA-4-P Blocks of 2 channels; parallel; cover ident color: red handle analog or digital signals. The patch panel is housed in a robust black-coated steel/aluminium shell, features precision aluminum hardware, and includes two built in cable bars and two wide channel ID strips. NJ3TTA-4-I Blocks of 2 channels; isolated; cover ident color: orange Configurations The standard version of our "Easy-Patch" is delivered with the bottom row half normalled for each jack pair. There are four other normalling configurations available for each jack pair: Full Normalled Half Normalled Top Row Isolated Parallel Electrical N P PA - T T S e r i e s All panels are provided with high quality, long life NEUTRIK(R) NJ3TTA gold plated double contact point TRS jacks (2x48). The NEUTRIK(R) Easy-Patch system is easily programmable for any one of five signal routing configurations (unit ships in the half-normalled - bottom row configuration) and for the grounding system of your choice. Each individual jack can be changed or reconfigured quickly even while the unit is "on air." The Easy-Patch offers two contact points per (TRS) terminal with a uniquely designed mechanism for the normalling contact. To change or repair a jack, simply remove the front panel to reveal the module, replace or reconfigure the jack(s) and replace the panel. It's that easy! NJ3TTA-4-HNB CAUTION: DO NOT use parallel configurations or other parallel paths in the half-normalled configuration when handling DIGITAL signals. Parallel paths may lead to mismatching. Please see the configuration chart included with each unit. WIRING TERMINATIONS Our Easy-Patch system offers different different wiring interconnects at the rear of the unit: Spring loaded push terminals with gas tight connection* 56 pin Elco/Edac connectors Solder lugs *The spring loaded terminal blocks allow quick and easy wiring. NO soldering and screwing necessary and NO special tools are required. Simply insert the STRIPPED wire after depressing the release tab. These push terminal blocks can handle stranded wire up to AWG 20 (0.5 mm2) and solid wire up to AWG 18 (0.75 mm2). T E C H N I C A L D ATA : Frequency range: DC to >50 MHz Channel separation: >100 dB @ 10 kHz, 600 terminated Insulation resistance: >1G @ 500 V dc Connector contact resistance: 20 m Switch contact resistance: <25 m Dielectric strength: 1000 V dc >40 dB @ 6 MHz, 110 terminated Mechanical Lifetime: >5.000 Insertion/withdrawal cycles Depth: 178 mm (7") Insertion/withdrawal force: <10N / >8N Dimensions (rack mount): 482 mm (W) x 44 mm (H) (19" x 1U) Temperature range: -30C to +80C Materials Jack housing: PA 66 blend Jack contacts: CuSn6 - TRIBOR(R) plated (0.2 m AuCo over 2 m NIP) Housing: Steel and aluminum, black coated Front panel: AIMgSI0.5 F22 Configurations Chart NJ3TTA Series Jack specially designed normalling mechanism (contact point; flexible arm) Half Normalled Bottom Half Normalled Top Full Normalled Parallel Isolated Spring loaded push terminals (PH) Jumper Configuration top row bottom row 56+ pin Elco/Edac (E56) 732-901-9488 30 normalling configuration bars Solder lugs (S) ring switch (contact point) tip contact (2x) ring contact (2x) sleeve contact (2x) www.neutrikusa.com 31 EasyPatch 14"-18" adjustable length Patch Panels EasyPatch Jumper tabs for easy programming Patch Panels O R D E R I N G I N F O R M AT I O N - N P P - T B S e r i e s 2 x 24 NJ6TB-V Jacks, Mates w/ 1/4" BP0316 & MIL-P-642/2 plugs Spring loaded solderless push termination center marking strip built in cable bar Optional color coded snap on tabs Type No. Wiring Configuration NPP-TB Spring loaded Push terminations Programmable for all commonly used configurations NPP-TB-HN Solder contacts Half Normalled Bottom Row only NPP-TB-14PT Spring loaded Push terminations Programmable for all commonly used configurations NPP-TB-14E Elco/Edac 90 pin female Programmable for all commonly used configurations O R D E R I N G I N F O R M AT I O N - A c c e s s o r i e s NPP-TB Series The "Easy Patch" is a durable compactly designed 19" rack mount (19" x 1U) series of patch panels. Each unit is made in a galvanized metal housing and includes a built in cable tray. The front panel has a removable center marking strip and individual snap on tabs for color coding. This system is programmable with jumpers in any of 6 different configurations and offers 4 flexible grounding possibilities to fit your needs. Fast rear connections are either solderless spring loaded gold terminal blocks or Elco/Edacs (both for fully normalled versions). A half-normalled solder lug version is also available. The "Easy Patch" is both analog and digital capable. The standard unit is 7" in depth and the expandable units measures from 14" - 18" to fit various rack spaces. In addition to color coded labeling tabs in the ten resistor colors, accessories include a dust cover and a rear extension bar for strain relief for the 7" versions (the extendible versions come with a cover and the rear extension bar). All these features lead to a TB patch panel that is cost effective, labor saving, easy to program and durable for your application. Channel ID snap on tabs. Available in ten resistor colors. Sold individually, or in multi-color packages. NPP-C Metal dust cover for 7" standard versions (extendible versions come with cover). NPP-S Rear extension bar to act as strain relief for large cables (standard with extendible versions). NKTB patch cables TB patch cables available in red or black in lengths of 1', 18", 2', or 3'. See Patch Cable section for details (page 29). T E C H N I C A L D ATA : Electrical Connector contact resistance: <10 m Switch contact resistance: <15 m Insulation resistance: >1G @ 500 V dc Dielectric strength: 1000 V dc Cross talk between stereo pairs: >120 dB @ 1 kHz: 600 terminated Cross talk between two adjacent channels: >120 dB @ 1 kHz GROUNDING: The flexible grounding possibilities are: WIRING: Individual: Each channel ground is a separate connection with its corresponding cable shield. Mechanical Group: To group channels together you must link the shields of the common ground bar by the solder joints and then you must cut the tracks at the point where you want to form the group. The ground bar must be connected to one common cable shield. STANDARD: Spring loaded push terminals with a gas tight connection The spring loaded terminal blocks make it fast and easy to connect, change, or replace a wire. NO soldering or screws necessary. Simply depress the white key and insert the stripped wire into the space to make a gas tight connection. Stranded wire up to AWG 20 (0.5 mm2) and solid wire to AWG 18 (0.75 mm2) is possible. Connects all shields to the common ground bar. The ground bar must be connected to one common cable shield. OPTIONS: 90 pin Elco/Edac connectors (-14" versions only) - female terminations* Environmental Solder lug -HN <half-normalled> versions only Temperature range: Chassis ground is connected to the common ground. This is the same as for common grounding but with an additional connection to the common ground of the patch panel chassis using a jumper. *Pin outs available upon request Common: ChassisCommon: The "Easy Patch" offers four wiring choices. NPP-LB Insertion / withdrawal: * Force: 10N / 8N Dimensions: 485 (W) x 44 (H) mm (19" x 1U), rack mount * Lifetime: >5000 insertion / withdrawal cycles Depth: * 139.7 mm (5.5") for Standard * 355.6 mm (14") for "-14" version * 457.2 mm (18") -30C to +80C Material Housing, Cable bar, Dust cover: Configuration Chart Steel, AlZn galvanized Front Panel: Pocan B 3225 Coding tabs: Grilon PVZ-15H Switching: Programmable for all commonly used configurations. Wiring Variants Full Normalled Parallel Isolated Half Normalled Bottom Row Half Normalled Top Row Double Normalled 90 pin Elco/Edac 732-901-9488 32 Spring loaded push terminals (PH) -HN solder lug www.neutrikusa.com 33 Accessories Accessories Adapters Goosenecks Modules Wallplates Neutrik(R) offers a variety of adapters that will reliably interface with various connector combinations. These adapters are available in either wired or non-wired versions depending on your needs. Made with the same rugged diecast shells of our "X" series connectors, these adapters offer the professional look, compact design and durability that you've come to expect from Neutrik(R). Neutrik(R) offers strong, flexible, noiseless goosenecks in three lengths to fit a variety of applications. Our goosenecks are available individually or in sets which include a locking female XLR for theft proof mic connections and a series of threaded adapters. The interior of the gooseneck is a stainless steel spiral. The exterior features a non-reflective black finish. Our complete line of modules allows the user to design their own adapters to suit a variety of specific needs. Based on the Neutrik(R) "X" series connector system, these modules offer professional and reliable connections. These modules will accept the Neutrik(R) NTE series of transformers. Riveted offset mounting in stainless steel plates to allow for printing or etching, NEUTRIK USA, Inc.(R) offers our 3 pin male and/or female D-L-1 series receptacles, 1/4" locking jacks, or NL*MP Speakon(R) receptacles as standard wallplates. Mounting in a standard single electrical box outlet, screws are included and the dual configurations can be used either vertically or horizontally. O R D E R I N G I N F O R M AT I O N - M o d u l e s Type O R D E R I N G I N F O R M AT I O N - A d a p t e r Type Part No. Gender Conversion Connection Type Part 1 Part 2 NA3FF NA5FF NA5FM NA3MM Part #s as shown NA5MM are UNWIRED. NA3M5F For wired NA3F5M adapters add NA3FM "/W" to part # - NA3F5F i.e. NA3FF/W. NA3M5M XLR 3 pin female XLR 5 pin female XLR 5 pin female XLR 3 pin male XLR 5 pin male XLR 3 pin male XLR 3 pin female XLR 3 pin female XLR 3 pin female XLR 3 pin male XLR 3 pin female XLR 5 pin female XLR 5 pin male XLR 3 pin male XLR 5 pin male XLR 5 pin female XLR 5 pin male XLR 3 pin male XLR 5 pin female XLR 5 pin male Extension NA3FJ NA3MJ NA2FP* NA2MP* NA3FP NA3MP Part #s as shown NA2FBNC* are UNWIRED. NA2MBNC* For wired NA2FPMF* adapters add NA2MPMF* "/W" to part # - NA2FPMM* i.e. NA3FJ/W. NA2MPMM* XLR 3 pin female XLR 3 pin male XLR 3 pin female XLR 3 pin male XLR 3 pin female XLR 3 pin male XLR 3 pin female XLR 3 pin male XLR 3 pin female XLR 3 pin male XLR 3 pin female XLR 3 pin male stereo 1/4" locking jack stereo 1/4" locking jack mono 1/4" plug mono 1/4" plug stereo 1/4" plug stereo 1/4" plug BNC socket BNC socket phono (RCA-) jack phono (RCA-) jack phono (RCA-) plug phono (RCA-) plug Threaded Adapters NAM1 NAM4 NAM5 M17x1 outside thread outside thread 5/8" 27 UNS M17x1 outside thread inside thread 5/8" 27 UNS 3/8" inside thread outside thread 5/8" 27 UNS *For adapters wired according to IEC268-12 (pin 2 is signal, pins 1 & 3 wired to ground) add "/W" to part # - i.e. NA2FP/W Other pinouts and special wiring options may be available as special order. Minimums may be required. Contact Neutrik USA, Inc.(R) for details. Made of: CuZn39Pb2; stainless steel spiral interior; non-reflective black matte finish Type Part No. Connection Type Gooseneck GN18 Connection Type Top Bottom Coupler VMX M17x1 outside M17x1 outside Housing NM3FXI XLR female M17x1 outside Housing NM3MXI XLR male M17x1 outside Housing NM2P Mono 1/4" plug M17x1 inside Housing NM3P Stereo 1/4" plug M17x1 inside Housing NM3J Stereo 1/4" locking jack M17x1 inside Comments Comments O R D E R I N G I N F O R M AT I O N - Wa l l p l a t e s all metal distance sleeve keeps XLR insert in place Type Description Part # Single NL2MP Speakon(R) receptacle 102L Single NC3FD-L-1- receptacle* 103F Single NC3MD-L-1 receptacle* 103M Single NJ3FP6C to 1/4" locking jack 103P Single NL4MP Speakon(R) receptacle 104L Dual NL2MP Speakon(R) receptacles 202L NC3FD-L-1- receptacles* 203F M17x1 inside thread at both ends 230 mm/9.055" length M17x1 inside thread at both ends 360 mm/14.173" length M17x1 inside thread at both ends 500 mm/19.685" length Gooseneck GNS18 set M17x1 inside thread at both ends Sets include in addition to GN 18, 36 or 50 Switch module SM2/2 M17x1 outside M17x1 outside 2x2 switch positions Dual Dual NC3FD-L-1 and NC3MD-L-1 receptacle* 203FM GNS36 M17x1 inside thread at both ends * black NC3FX-spec. XLR female with securing ring and fixing screw to prevent theft and noise. Housing KM M17x1 inside M17x1 inside long version Dual NC3MD-L-1 receptacles* 203M Housing KMX M17x1 inside M17x1 inside short version Dual NJ3FP6C to 1/4" locking jack 203P Dual NL4MP Speakon(R) receptacle 204L GN36 GN50 GNS50 M17x1 inside thread at both ends * black adapter M17x1 outer to 5/8" 27 UNS inner thread with through hole and cable outlet. * thread adapter M17x1 outer - 3/8" outer thread Adapters with GNS sets are NOT sold separately * thread adapter 3/8" inner - 5/8" 27 UNS outer thread (see Pt# NAM5) Flange GF1 Panel-mounting kit: Flange O 63,50 mm including mounting screw M17x1, 13 mm length Mounting screw MSG 732-901-9488 34 Part No. O R D E R I N G I N F O R M AT I O N - G o o s e n e c k *Special order of 4-7 pin receptacles available. Minimums required. Contact Neutrik USA, Inc.(R) for details." M17x1 13 mm length www.neutrikusa.com 35 Accessories Accessories AES/EBU Digital Audio Adapters In addition to the original NADITBNC adapters, two new versions of this series are now available. The BNC to XLR 3-pin receptacle (male and female) and the BNC to XLR cable end (male and female). This series was developed to provide an excellent impedance transformer at a reasonable cost for meeting the needs between analog and digital applications. Their use also allows for longer cable runs via unbalanced coaxial lines rather than twisted pair cables that present high attentuation values at the relevant frequencies. The criteria for these adapters are: Impedance matching between 110 Ohms and 75 Ohms. Transition of balanced/unbalanced circuit (balun). Electrical isolation (optional, not necessary). Attentuation for use of analog video distribution equipment (optional). Reduction of hum and noise. Tr a n s f o r m e r s ORDERING INFORMATION - AES/EBU digital Audio Adapter excellent frequency response these transformers are also available in our NP2C plug to convert mic levels to guitar inputs. Neutrik(R) is pleased to offer a series of professional audio transformers for use in a variety of audio, studio, or line input applications. Featuring very low distortion and Part # Description NADITBNC-F Female XLR Receptacle (3 pin) 110 Ohm Input to BNC Receptacle 75 Ohm Output. NADITBNC-M BNC Receptacle 75 Ohm Input to Male XLR Receptacle (3 pin)110 Ohm Output. Part # NADITBNC-FX Female XLR cable end 3-pin 110 Ohm Input to BNC Receptacle 75 Ohm Output. Ripple 20Hz-20kHz Max. input voltage (@60Hz) THD 1% THD 3% Min. load impedance NTE1 max. -1dB 1.2 V 1.4 V 200 NADITBNC-MX BNC Receptacle 75 Ohm Input to Male XLR cable end 3-pin 110 Ohm Output. NTE4 max. -1dB 1.6 V 2.2 V 1 k NTE10/3 max. -2dB 1.2 V 1.6 V 10 k Primary Secondary Primary inductance @ 30Hz 1.1 k 5% 1.35 k 5% 150 H Tr a n s f o r m e r S p e c i f i c a t i o n s S P E C I F I C AT I O N S Frequency Band: 0.1 MHz to 15 MHz VSWR/Return Loss: <1.30 / >17.7 dB up to 10 MHz Insertion Loss: <0.3dB @ 0.1 to 10 MHz Maximum Voltage/Max. Power: 5 Vp-p / 250 mW Turns Ratio NTL1 1 : 1 5% Winding resistance (DC) NTM1 1 : 1 10% 85 3% 105 5% 8 H NTM4 1 : 4 10% 105 3% 1.25 k 5% 8 H Type Part No. O R D E R I N G I N F O R M AT I O N - Tr a n s f o r m e r s Schematics NADITBNC-F NADITBNC-M 1 Comments Source/load Impedances in Turns Ratio (prim : sec) Max, input voltage 1% THD @60Hz: 200 / 200 1:1 1.2 V Audio input NTE1 Audio input NTE4 1k / 10K 1:4 400 mV rms free wires Audio input NTE10/3 10k / 50K 1 : 3 : 10 500 mV rms free wires 1/4" phone plug NP2C-T10AA(-BAG) 200 / 50K 1 : 10 120 mV rms with built-in transformer to convert microphone levels to guitar inputs Studio line NTL1 600 / 600 1:1 6 V rms PCB mounting, fully Mu-metal shielded Studio mic input NTM1 200 / 200 1:1 1.5 V rms PCB mounting, fully Mu-metal shielded Studio mic input NTM4 200 / 10K 1:4 1.2 V rms PCB mounting, fully Mu-metal shielded 1 732-901-9488 36 3 XLR - M BNC XLR - F BNC 2 3 2 Application Connection Type free wires 1% THD @30Hz: www.neutrikusa.com 37 Accessories Specifications Modules Adapters * XLR: <3 m X X * Jack: <6 m X X Insulation resistance: >2G X X Dielectric strength: 1.5 kV dc X X Electrical Contact resistance: Mechanical XLR & Color Coded Neutrik(R) offers color coded accessories for easy identification and match up for a variety of our connectors. Available in the ten resistor colors these accessories can be used on our standard 1/4" plugs or Neutricon(R) connectors (BSP); our "X" series cable connectors (BSX and XCR); our "D" series, Accessories 1/4" locking jack and NL*MP connectors (DSS); or our TT size single plugs (BSTP). The PCR and XCR rings can be added to cables which are already soldered. Mix and match - you'll never make the wrong connection again when using our color coding system. O R D E R I N G I N F O R M AT I O N - C o l o r c o d e d A c c e s s o r i e s Part #'s Description -WT (White) ACRF-Color Colored rings for "A/B" series female receptacles -GR (Gray) -V (Violet) -BL (Blue) -GN -Y -O (Green) (Yellow) (Orange) -R (Red) -BR (Brown) -BLK (Black) Max. wire size: XLR: 2.5 mm2 / 14 AWG X X Jack: 1.5 mm2 / 16 AWG X X ACRM-Color Colored rings for "A/B" series male receptacles BSP-Color Colored boots for all NP*C 1/4" plugs and Neutricon(R) BSTP-Color Colored sleeves for NP3TT-P Bantam size plugs BSX-Color Colored boots for X series cable connectors BSZ-Color Colored boots for Easycon series DBA Blank plate for all "D" Series sized cutouts DSS-Color Colored labeling plates for all D Series size receptacles Environmental Temperature range: -20C to +65C X X Solderability: complies with IEC 68-2-20 X X Materials Shell: ZnAl4Cu1, galv. Cu/Ni X X Insert / Insulation: PA 6.6 30% GR X X Contacts: * female / jack: CuSn6, gal 2m Ag X X * male / plug: CuZn39Pb3, galv 2m Ag X X Tr a n s f o r m e r s NTE1, 4, 10/3 NTL1, NTM1, 4 NTL1: typical application PCR-Color 732-901-9488 38 Colored ring with flat label surface for NP*C series 1/4" plugs SCDF Rubber covers - for female receptacles of "D", "D-L-1", and "DM3" Series XCR-Color Colored ring with flat label surface for X series cable connectors SCDM Rubber covers - for male receptacles of "D", "D-L-1", "DM3", and NL*MP www.neutrikusa.com 39 Neutrik Part Number Guide & Contact Arrangements Neutrik Part Number Guide Part Number Guide Basic Neutrik Part Nos. NEUTRIK N Ty p e # of Contacts Sex Series Te r m i n a t i o n s F e a t u re Shell/Contacts Latch 3 pin C 3 F A = Adapter AC = "AC" C = Connector F = Fi (ProFi) J = Jack K = "Kabel" (Patch Cable) L = Loudspeaker M = Module P = Plug PP = Patch Panel T = Transformers 2 - 10 F = Female M = Male D A B CJ D K P RC TB TT X ZL L - H = Right angle PCB mount L = Solder V = Vertical PCB mount 1 - Revisions: "I" or "1" OR Grounding: "-1" or "-2" A/B Series only BAG - No suffix = Ni/Silver -B = Black/Gold -BAG = Black/Silver Solder cups 0 Female Latchless (retention spring instead of "PUSH" tab. 3 pin female receptacle only. "P" series not included) Black housing/Silver contacts NC3FD-L-1-BAG NEUTRIK D Series Connector Revision 1 Contact Arrangements Mating Side 3 4 5 6 6S* 7 FEMALE Female receptacle 2 1 4 1 3 3 MALE 3 1 5 4 2 3 1 4 3 2 6 4 2 6 1 6 7 5 4 3 5 3 4 2 Stereo Switching NCJ9FI-H-O 4 6 7 2 3 Horizontal PCB Mount 3 1 5 6 3 2 7 1 1 2 1 6S* All standard inserts are black 4 NEUTRIK Revision 1 5 Connector/Jack (combo) Latchless *Switchcraft(R) equivalent This insert is colored gray. 732-901-9488 40 5 6 5 2 6 4 3 5 1 3 2 5 3 4 2 1 4 2 1 www.neutrikusa.com 41 Index 102L 103F 103M 103P 104L 202L 203F 203FM 203M 203P 204L 3FD-H-I 3FD-H-I-B 3FD-H-I-0 3FD-L-I 3FD-L-I-B 3FD-L-I-O 3FD-V-I 3FD-V-I-B 3FD-V-I-O 3MD-H-I 3MD-H-I-B 3MD-L-I 3MD-L-I-B 3MD-V-I 3MD-V-I-B ACRF-@ ACRM-@ BB1 BC1 BP1 BS1 BSL-WR BSP-@ BSTP-@ BSX-@ BSZ@ DBA DH-NF DH-NF-BAG DH-NF-BAG-M3 DH-NF-BAG-O DH-NF-M3 DH-NF-M3-O DH-NF-O DH-NM DH-NM-BAG DH-NM-BAG-M3 DH-NM-M3 DHP DSS-@ FI-8 GF1 GN-18 GNS-18 GN-36 35 35 35 35 35 35 35 35 35 35 35 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 39 39 25 25 25 25 20 39 39 39 39 39 11 11 11 11 11 11 11 11 11 11 11 11 39 25 34 34 34 34 GNS-36 GN-50 GNS-50 KM KMX MBC MBS MC-8 MC-8Ni MI-8 MIF MIM MPC MPF12-H MPF12-V MPM12-H MPM12-V MPS MRF MRM MSC MSG MSRC NA2FBNC NA2FBNC/W NA2FP NA2FP/W NA2FPMF NA2FPMF/W NA2FPMM NA2FPMM/W NA2MBNC NA2MBNC/W NA2MP NA2MP/W NA2MPMF NA2MPMF/W NA2MPMM NA2MPMM/W NA3FF NA3FF/W NA3FJ NA3FJ/W NA3FM NA3FM/W NA3FP NA3FP/W NA3F5F NA3F5F/W NA3F5M NA3F5M/W NA3M5F NA3M5F/W NA3M5M NA3M5M/W NA3MJ 34 34 34 35 35 26 26 25 25 25 26 26 26 26 26 26 26 26 26 26 26 34 26 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 by NA3MJ/W NA3MM NA3MM/W NA3MP NA3MP/W NA4LJ NA5FF NA5FF/W NA5FM NA5FM/W NA5MM NA5MM/W NAC3FCA NAC3FCB NAC3MPA NAC3MPB NAC3MM NADITBNC-F NADITBNC-FX NADITBNC-M NADITBNC-MX NAM1 NAM4 NAM5 NBS NC3FAH NC3FAH-1 NC3FAH-1-O NC3FAH-2 NC3FAH-2-O NC3FAH-O NC3FAHL-1 NC3FAHL-1-O NC3FAHL-2 NC3FAHL-2-O NC3FAHR-1 NC3FAHR-1-O NC3FAHR-2 NC3FAHR-2-O NC3FAV NC3FAV-1 NC3FAV-1-O NC3FAV-2 NC3FAV-2-O NC3FAV-O NC3FAY NC3FBH-1 NC3FBH-1-B NC3FBH-1-O NC3FBH-2 NC3FBH-2-B NC3FBH-2-O NC3FBHL-1 NC3FBHL-1-B NC3FBHL-1-O NC3FBHL-2 part 34 34 34 34 34 20 34 34 34 34 34 34 23 23 23 23 23 36 36 36 36 34 34 34 24 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 number NC3FBHL-2-B NC3FBHL-2-O NC3FBHR-1 NC3FBHR-1-O NC3FBHR-2 NC3FBHR-2-B NC3FBHR-2-O NC3FBV-1 NC3FBV-1-B NC3FBV-1-O NC3FBV-2 NC3FBV-2-B NC3FBV-2-O NC3FBY NC3FBY-B NC3FD-H NC3FD-H-B NC3FD-H-BAG NC3FD-H-BAG-O NC3FD-H-O NC3FD-L NC3FD-L-B NC3FD-L-BAG NC3FD-L-BAG-O NC3FD-L-O NC3FD-L-1 NC3FD-L-1-B NC3FD-L-1-BAG NC3FD-L-1-BAG-O NC3FD-L-1-O NC3FD-V NC3FD-V-B NC3FD-V-BAG NC3FD-V-BAG-O NC3FD-V-O NC3FEZ-AU NC3FEZ-B NC3FEZY-AU NC3FEZY-B NC3FP-1 NC3FP-1-B NC3FP-1-BAG NC3FP-1-BAG-O NC3FPP NC3FRC NC3FRC-B NC3FRC-BAG NC3FX-1 NC3FX-1-BAG NC3FX-1-D NC3FX-14 NC3FX-14-B NC3FX-14-B-D NC3FX14-D NC3FX NC3FX-B 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 11 11 11 11 11 11 11 11 11 11 12 12 12 12 12 11 11 11 11 11 5 5 5 5 12 12 12 12 13 3 3 3 2 2 2 2 2 2 2 2 2 732-901-9488 42 NC3FX-BAG NC3FX-BAG-D NC3FXCC NC3FX-D NC3FX-HD NC3FX-HD-B NC3FX-S NC3FX-S-B NC3FX-SPEC. NC3MAH NC3MAHL NC3MAH-O NC3MAHR NC3MAV NC3MAV-O NC3MAY NC3MBH NC3MBH-B NC3MBHL NC3MBHL-B NC3MBHR NC3MBHR-B NC3MBV NC3MBV-B NC3MBY NC3MBY-B NC3MD-H NC3MD-H-B NC3MD-H-BAG NC3MD-L NC3MD-L-B NC3MD-L-BAG NC3MD-L-1 NC3MD-L-1-B NC3MD-L-1-BAG NC3MD-V NC3MD-V-B NC3MD-V-BAG NC3MEZ-AU NC3MEZ-B NC3MEZY-AU NC3MEZY-B NC3MP NC3MP-B NC3MP-BAG NC3MPP NC3MRC NC3MRC-B NC3MRC-BAG NC3MX-1 NC3MX-1-BAG NC3MX-1-D NC3MX-14 NC3MX-14-B NC3MX-1-BAG-D NC3MX-14-D Index 2 2 3 2 4 4 4 4 4 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 11 11 11 11 11 11 12 12 12 11 11 11 5 5 5 5 12 12 12 13 3 3 3 2 2 2 2 2 2 2 NC3MX-14-B-D NC3MX NC3MX-B NC3MX-B-D NC3MX-BAG NC3MX-BAG-D NC3MXCC NC3MX-D NC3MX-HD NC3MX-HD-B NC4FAH NC4FAV NC4FBH NC4FBV NC4FBV-B NC4FD-L-1 NC4FD-L-1-B NC4FD-L-1-BAG NC4FDM3-H NC4FDM3-H-BAG NC4FP-1 NC4FP-1-B NC4FP-1-BAG NC4FRC NC4FRC-B NC4FRC-BAG NC4FX NC4FX-B NC4FX-BAG NC4FX-HD NC4FX-HD-B NC4MAH NC4MAV NC4MBH NC4MBH-B NC4MBV NC4MBV-B NC4MD-L-1 NC4MD-L-1-B NC4MD-L-1-BAG NC4MDM3-H NC4MDM3-H-BAG NC4MP NC4MP-B NC4MP-BAG NC4MRC NC4MRC-B NC4MRC-BAG NC4MX NC4MX-B NC4MX-BAG NC4MX-HD NC4MX-HD-B NC5FAH NC5FAV NC5FBH 2 2 2 2 2 2 3 2 4 4 9 9 9 9 9 12 12 12 13 13 12 12 12 3 3 3 2 2 2 4 4 9 9 9 9 9 9 12 12 12 13 13 12 12 12 3 3 3 2 2 2 4 4 9 9 9 NC5FBH-B NC5FBV NC5FBV-B NC5FD-L-1 NC5FD-L-1-B NC5FD-L-1-BAG NC5FDM3-H NC5FDM3-H-BAG NC5FDM3-V-BAG NC5FP-1 NC5FP-1-B NC5FP-1-BAG NC5FPP NC5FRC NC5FRC-B NC5FRC-BAG NC5FX NC5FX-B NC5FX-BAG NC5FX-HD NC5FX-HD-B NC5MAH NC5MAV NC5MBH NC5MBH-B NC5MBV NC5MBV-B NC5MD-L-1 NC5MD-L-1-B NC5MD-L-1-BAG NC5MDM3-H NC5MDM3-H-BAG NC5MDM3-V-BAG NC5MP NC5MP-B NC5MP-BAG NC5MRC NC5MRC-B NC5MRC-BAG NC5MX NC5MX-B NC5MX-BAG NC5MX-HD NC5MX-HD-B NC6FD-L-1 NC6FD-L-1-B NC6FD-L-1-BAG NC6FDS-L-1 NC6FDS-L-1-B NC6FP-1 NC6FP-1-B NC6FP-1-BAG NC6FPS-1 NC6FRC NC6FRC-B NC6FRC-BAG 9 9 9 12 12 12 13 13 13 12 12 12 13 3 3 3 2 2 2 4 4 9 9 9 9 9 9 12 12 12 13 13 13 12 12 12 3 3 3 2 2 2 4 4 12 12 12 12 12 12 12 12 12 3 3 3 NC6FRCS NC6FRCS-B NC6FRCS-BAG NC6FX NC6FX-B NC6FX-BAG NC6FXS NC6FXS-B NC6FXS-BAG NC6FX-HD NC6FX-HD-B NC6MD-L-1 NC6MD-L-1-B NC6MD-L-1-BAG NC6MDS-L-1 NC6MDS-L-1-B NC6MP NC6MP-B NC6MP-BAG NC6MRC NC6MRC-B NC6MRC-BAG NC6MRCS NC6MRCS-B NC6MRCS-BAG NC6MX NC6MX-B NC6MX-BAG NC6MXS NC6MXS-B NC6MXS-BAG NC6MX-HD NC6MX-HD-B NC7FD-L-1 NC7FD-L-1-B NC7FD-L-1-BAG NC7FP-1 NC7FP-1-B NC7FRC NC7FRC-B NC7FRC-BAG NC7FX NC7FX-B NC7FX-BAG NC7FX-HD NC7FX-HD-B NC7MD-L-1 NC7MD-L-1-B NC7MRC NC7MRC-B NC7MRC-BAG NC7MX NC7MX-B NC7MX-BAG NC7MX-HD NC7MX-HD-B 3 3 3 2 2 2 2 2 2 4 4 12 12 12 12 12 12 12 12 3 3 3 3 3 3 2 2 2 2 2 2 4 4 12 12 12 12 12 3 3 3 2 2 2 4 4 12 12 3 3 3 2 2 2 4 4 by NCJ5FI-H NCJ5FI-H-O NCJ5FI-S NCJ5FI-S-O NCJ5FI-V NCJ5FI-V-O NCJ6FI-H NCJ6FI-H-O NCJ6FI-S NCJ6FI-S-O NCJ6FI-V NCJ6FI-V-O NCJ9FI-H NCJ9FI-H-O NCJ9FI-S NCJ9FI-S-O NCJ9FI-V NCJ9FI-V-O NCJ10FI-H NCJ10FI-H-O NCJ10FI-S NCJ10FI-S-O NCJ10FI-V NCJ10FI-V-O NF2CB/2 NF-3 NJ2FD-V NJ3FC6 NJ3FC6-BAG NJ3FD-V NJ3FP6C NJ3FP6C-BAG NJ3FP6C-P NJ3TTA-4-HNB NJ3TTA-4-HNT NJ3TTA-4-FN NJ3TTA-4-P NJ3TTA-4-I NJ5FD-V NJ6FD-V NJ6TB-V NKTB03-BLK NKTB03-R NKTB04-BLK NKTB04-R NKTB05-BLK NKTB05-R NKTB1-BLK NKTB1-R NKTT03-BL NKTT03-BLK NKTT03-BLK-AU NKTT03-GN NKTT03-R NKTT03-R-AU NKTT03-Y part 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 28 24 15 15 15 15 15 15 15 31 31 31 31 31 15 15 15 29 29 29 29 29 29 29 29 29 29 29 29 29 29 29 number NKTT04-BL 29 NKTT04-BLK 29 NKTT04-BLK-AU 29 NKTT04-GN 29 NKTT04-R 29 NKTT04-R-AU 29 NKTT04-Y 29 NKTT05-BL 29 NKTT05-BLK 29 NKTT05-BLK-AU 29 NKTT05-GN 29 NKTT05-R 29 NKTT05-R-AU 29 NKTT05-Y 29 NKTT1-BL 29 NKTT1-BLK 29 NKTT1-BLK-AU 29 NKTT1-GN 29 NKTT1-R 29 NKTT1-R-AU 29 NKTT1-Y 29 NKTT2-BL 29 NKTT2-BLK 29 NKTT2-BLK-AU 29 NKTT2-GN 29 NKTT2-R 29 NKTT2-R-AU 29 NKTT2-Y 29 NKTT12-BL 29 NKTT12-BLK 29 NKTT12-BLK-AU 29 NKTT12-GN 29 NKTT12-R 29 NKTT12-R-AU 29 NKTT12-Y 29 NL-FASTON 20-21 NL2FC 21 NL2MD-H 21 NL2MD-V 21 NL2MP 21 NL4FC 21 NL4FC-B 21 NL4MD-H 21 NL4MD-H-2 21 NL4MD-V 21 NL4MD-V-1 21 NL4MD-V-2 21 NL4MMX 21 NL4MP 21 NL4MP-2 21 NL4MP-B 21 NL4MPR 21 NL4MPR-V 21 NL4MP-ST 21 NL4MP-UC 21 NL8FC 21 NL8MD-H 21 NL8MD-H-BAG 21 NL8MD-V 21 NL8MD-V-BAG 21 NL8MM 21 NL8MPR 21 NL8MPR-BAG 21 NM2P 35 NM-3 24 NM3FXI 35 NM3J 35 NM3MXI 35 NM3P 35 NMC 24 NP2C 17 NP2C-B 17 NP2C-BAG 17 NP2C-BAG-D 17 NP2CM 17 NP2CM-B 17 NP2CM-R 17 NP2CM-I 17 NP2C-T10AA 17,37 NP2C-T10AA-BAG 17,37 NP2L 17 NP2L-BAG 17 NP2RCS 17 NP3C 17 NP3C-B 17 NP3C-BAG 17 NP3C-D 17 NP3CM 17 NP3CM-B 17 NP3CM-R 17 NP3CM-I 17 NP3F-H 24 NP3F-V 24 NP3M-H 24 NP3M-V 24 NP3RCS 17 NP3TB-B 17 NP3TB-R 17 NP3TM-B 17 NP3TM-R 17 NP3TT-2 17 NP3TT-P-B 17 NP3TT-P-B-AU 17 NP3TT-P-R 17 NP3TT-R-AU 17 NPPA-TT-PT-PH 30 NPPA-TT-E56 30 NPPA-TT-S 30 NPP-C 33 NPP-LB 33 NPP-S 33 NPP-TB 32 NPP-TB-HN NPP-TB-14E NPP-TB-14PT NPS NR3F NR3M NSC NTE1 NTE4 NTE103 NTL1 NTM1 NTM4 PC1 PCR@ PP1 PS1 RP-8 RP-81 RP-8Ni SC-8 SC-8Ni SC-8W SC-81 SCDF SCDM SCREW-2.5M SCREW-2.9M SD-NLP SD-1 SM2/2 SR-8 SR-8W VMX XCR-@ 32 32 32 24 24 24 24 37 37 37 37 37 37 25 39 25 25 25 25 25 25 25 25 25 39 39 8 9,19,21 20 11 35 25 25 35 39 @ denotes product available in ten resistor colors as follows. # (0) (1) (2) (3) (4) (5) (6) (7) (8) (9) Color Black Brown Red Orange Yellow Green Blue Violet Grey White Suffix - BLK - BR -R -O -Y - GN - BL -V - GR - WT www.neutrikusa.com 43 Index by Series "A/B" Series Notes 8 - 10 Adapters 34, 36, & 38 Color Coded Accessories 39 Combo 19 "D" Series 11 & 14 Digital XLR 3&7 "D-L-1" Series 12 & 14 "DM3" Series 13 - 14 EasyCon Series 5&7 EasyPatch Patch Panels 30 - 33 FX-S Series 4&7 FX-Spec 4&7 Goosenecks 34 Jacks MiniCon 15 - 16 26 - 27 (R) Modules 35 & 38 NanoCon(R) 24 & 27 Neutricon(R) 25 & 27 "P" Series 12 & 14 "PP" Series 13 - 14 Patch Cables 29 Plugs 17 - 18 PowerCon 23 (R) Profi(R) 28 "RC" Series 3&6 Speakon 20 - 22 Transformers 37 - 38 (R) Wallplates 35 "X" Series 2&6 "X-1" Series 2&6 "X-14" Series 2&6 "X-HD" Series 4&6 XLR Accessories 39 732-901-9488 44 www.neutrikusa.com PA R E N T: SUBSIDIARIES: Neutrik AG Im alten Riet 34 FL-9494 Schaan Liechtenstein 011 423 237 2424 FAX 011 423 232 5393 neutrik@neutrik.com www.neutrik.com Neutrik UK, Ltd. Columbia Business Park Sherbourne Avenue Ryde, Isle of Wight P033 3QD, Great Britian 011 44 1983 811 441 FAX 011 44 1983 811 439 sales@neutrik.co.uk Neutrik Vertriebs GmbH Felix-Wankel-Strasse 1 DE-85221 Dachau Germany 011 49 8131 2808 90 FAX 011 49 8131 2808 30 info@neutrik.de Neutrik Ltd., Japan Sakoh Building Sendagaya 1-11-4 Sibuya-Ku Tokyo 151 Japan 011 81 3 3663 4733 FAX 011 81 3 3663 4796 mail@neutrik.co.jp Neutrik Zurich AG Steinackerstrasse 35 CH-8902 Urdorf Switzerland 011 41 736 5010 FAX 011 41 736 5011 neutrik@neutrik.ch