3FD-H-I-B - NEUTRIK - Datasheet.Live

Digital XLR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3, 7

Easycon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5, 7

4 & 5 pin A/B Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 – 10

Speakon® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 – 22

4 pole Receptacles – Increased Current & Screw Terminal

Water resistant drip boot

8 pole Receptacles with metal bezel

Easy Patch – NPPA Series TT patch panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 – 31

Color Coded Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

PCR – color coded ID rings for NP*C series

BSZ – color coded boots for Easycon XLR cable connectors

Spec Drawings: Dimensional drawings in .pdf and .dxf

formats are available on the web – www.neutrik.com in the

PRODUCTS section.

Assembly Instructions: Available on the web –

www.neutrik.com – in the TECHNICAL SUPPORT section.

All files are .pdf.

FAQs – Available on the web – www.neutrikusa.com – in the

FAQ section.

In person technical support for US customers – 732-901-9488

or info@neutrikusa.com.

In person technical support outside of the US – contact

Neutrik AG – neutrik@neutrik.com - for the Neutrik sister

company or agent nearest to you.

732-901-9488 www.neutrikusa.com

Table of Contents

XLR Cable Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 – 7

Solder and IDC terminations

Digital

Right Angle

Heavy Duty

with On-Off Switch

with Locking Ring

XLR Receptacles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 – 14

Solder

PCB Mount

IDC

Jacks and Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 – 18

1/4" plugs - mono & stereo

TT & TB plugs and jacks

Vertical PCB and Panel Mount 1/4" jacks

XLR Combo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Speakon® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 – 22

2, 4, or 8 pole cable ends

PCB mount, Solder or Screw Terminal Receptacles

Adapters: Speakon to 1/4" and Cable extenders

PowerCon® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Input

Output

Cable extender

Miniature Circular Connectors . . . . . . . . . . . . . . . . . . 24 – 27

NanoCon®(up to 3 contacts)

Neutricon®(up to 8 contacts)

MiniCon®(up to 12 contacts)

Profi®(RCA Plugs) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Patch Cables (TT & TB plugs) . . . . . . . . . . . . . . . . . . . . . . . 29

“EasyPatch” audio patch panels . . . . . . . . . . . . . . . . . 30 – 33

TT & TB styles

Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 – 38

XLR Adapters & Modules

Goosenecks, Transformers, Wallplates

AES/EBU Adapters

XLR & Color Coded Accessories . . . . . . . . . . . . . . . . . . . . . 39

BSP, BSX, BSTP, BSZ, DSS, PCR, XCR

SCDF, SCDM

DBA

Contact Arrangements . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Neutrik Part # Guide . . . . . . . . . . . . . . . . . . . . . . . . . . 40 – 41

Indexes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 – 44

by Part

by Series

Where to obtain Technical Information

New Products Added to this Catalog

This series has become the accepted worldwide standard

for XLR cable connectors. The compact design offers the

shortest XLR cable version in the industry. The female

features an insert which is completely surrounded by metal

for added protection and the shell has a rubber ring for

secure mating to a male XLR or microphone. Assembly is

quick and easy with no screws to worry about and includes

the unique NEUTRIK®chuck type strain relief. Accessories

include BSX boots and XCR labeling rings for color coding

identification (see page 39).

ORDERING INFORMATION – "X" Series Male

# of Nickel Shell Black Chrome Shell

Contacts Silver Contacts Silver Contacts Gold Contacts

3NC3MX NC3MX-BAG NC3MX-B

3** NC3MX-D NC3MX-BAG-D NC3MX-B-D

4NC4MX NC4MX-BAG NC4MX-B

5NC5MX NC5MX-BAG NC5MX-B

6NC6MX NC6MX-BAG NC6MX-B

6* NC6MXS NC6MXS-BAG NC6MXS-B

7NC7MX NC7MX-BAG NC7MX-B

ORDERING INFORMATION – "X" Series Female

# of Nickel Shell Black Chrome Shell

Contacts Silver Contacts Silver Contacts Gold Contacts

3NC3FX NC3FX-BAG NC3FX-B

3** NC3FX-D NC3FX-BAG-D NC3FX-B-D

4NC4FX NC4FX-BAG NC4FX-B

5NC5FX NC5FX-BAG NC5FX-B

6NC6FX NC6FX-BAG NC6FX-B

6* NC6FXS NC6FXS-BAG NC6FXS-B

7NC7FX NC7FX-BAG NC7FX-B

**Bulk packaged available in 3 pin version only. Must be ordered in multiples of 100

*Switchcraft©equivalent

X Series

A more economical version of the standard “X” series

connectors, the X-1 series has a one piece plastic boot and is

only available in 3 pin configurations.

The X-14 series is also only available in 3 pin configurations

and features a chuck that can accommodate cable diameters

up to 9.7mm. Both the X-1 and the X-14 series can use the

XCR rings for color coding (see page 39).

ORDERING INFORMATION – "X-1" Series Male

# of Nickel Shell Black Chrome Shell

Contacts Silver Contacts

3NC3MX-1 NC3MX-1-BAG

3** NC3MX-1-D NC3MX-1-BAG-D

ORDERING INFORMATION – "X-1" Series Female

# of Nickel Shell Black Chrome Shell

Contacts Silver Contacts

3NC3FX-1 NC3FX-1-BAG

3** NC3FX-1-D NC3FX-1-BAG-D

**Must be ordered in multiples of 100

Special orders may be available - contact Neutrik USA, Inc.®for details

ORDERING INFORMATION – "X-14" Series Male

# of Nickel Shell Black Chrome Shell

Contacts Silver Contacts

3NC3MX-14 NC3MX-14-B

ORDERING INFORMATION – "X-14" Series Female

# of Nickel Shell Black Chrome Shell

Contacts Silver Contacts

3NC3FX-14 NC3FX-14-B

Available bulk packed. Must be ordered in multiples of 100

Contact Neutrik USA, Inc.®for details.

X-1 and X-14 Series

These compact, low profile, right angle cable connectors are

designed to select any of 7x45° positions by rotating the

assembled insert into various indents before securing back

cover.

ORDERING INFORMATION – "RC" Series Male

# of Nickel Shell Black Chrome Shell

Contacts Silver Contacts Silver Contacts Gold Contacts

3NC3MRC NC3MRC-BAG NC3MRC-B

4NC4MRC NC4MRC-BAG NC4MRC-B

5NC5MRC NC5MRC-BAG NC5MRC-B

6NC6MRC NC6MRC-BAG NC6MRC-B

6* NC6MRCS NC6MRCS-BAG NC6MRCS-B

7NC7MRC NC7MRC-BAG NC7MRC-B

ORDERING INFORMATION – "RC" Series Female

# of Nickel Shell Black Chrome Shell

Contacts Silver Contacts Silver Contacts Gold Contacts

3NC3FRC NC3FRC-BAG NC3FRC-B

4NC4FRC NC4FRC-BAG NC4FRC-B

5NC5FRC NC5FRC-BAG NC5FRC-B

6NC6FRC NC6FRC-BAG NC6FRC-B

6* NC6FRCS NC6FRCS-BAG NC6FRCS-B

7NC7FRC NC7FRC-BAG NC7FRC-B

*Switchcraft©equivalent

RC Series

The Digital XLR is a 3-pole connector that allows the

transmission of digital audio signals, according to AES3,

efficiently and reliably. Features include a coaxial ground

spring and coaxial hex crimp ferrule at the cable entrance

for accurate and reliable transition of the shield to the

shell. The XCC series provides continuous (360°) ground

connection of the cable shield to the shell, which is essential

when transmitting digital audio signals.

Additionally excellent screening is provided up to 1.3GHz of

min-55dB (50 times better) and is especially suited for

coverage of the frequency range of mobile phones (see

graph below).

ORDERING INFORMATION – Digital XLR

# of Nickel Shell

Contacts Gold Contacts

Male Female

3NC3MXCC NC3FXCC

Crimp: HX-BNC ro M225201/5 01

Die: DIE-BNC-PG (6.5 mm hex)

Available in 4-7 pin configurations (including Switchcraft®6 pin configurations)

as special order. Minimum order required. Contact Neutrik USA, Inc.®for details.

Digital XLR

Frequency in MHz

Screening Attenuation in dB

-10

-20

-30

-40

-50

-60

-70

-80

-90

-100

0 300 600 900 1200

732-901-9488 www.neutrikusa.com

XLR Cable Connectors XLR Cable Connectors

“NEUTRIK®redefines the future of XLR Cable Connectors”

NEUTRIK once again takes the lead in offering innovative

designs for audio connector applications. Available with

either IDC or solder contacts, Easycon®is made of only three

pieces. There is no set screw or additional parts to drop or

lose. We believe that these connectors are the fastest way to

terminate a cable with an XLR - allowing the user to reduce

assembly time by as much as 60%.

Easycon®gold-plated (TRIBOR®), polished, self cleaning “tun-

ing-fork” IDC or solder contacts (patents granted and pend-

ing) extend lifetime mating cycles allowing easy and reliable

connections every time. The solderless shield

connection is direct to Pin 1. A drain wire connection is

also included.

The self-adjusting cam lock cable clamp (patent granted US

6 783 804) accepts a wide range of cable diameters

(5.5mm - 7.0mm) and provides increased retention force

under tensile stress.

Use the BSZ boots for easy color coding identification (see

page 39).

Easycon Series

This connector offers a locking ring for the highest security

protection of your microphones on the market today. Just

twist the ring into place and tighten the allen M2.5 screw

with a 1.27mm wrench for passive theft protection. The

locking ring also protects against accidental disconnects.

ORDERING INFORMATION – "FX-SPEC" Series

# of Black Chrome Shell

Contacts Silver Contacts

3NC3FX-SPEC

FX-SPEC Series

These heavy duty cable connectors were made for outdoor,

high traffic, or industrial applications. The male shell is

stainless steel and the female is covered in neoprene with a

sealing lip to mate securely. Gold contacts, which offer

superb abrasion resistance, are standard. The two piece

metal boot contains a rubber “O” ring which prevents

elements from entering the shell. The X-HD series is dust

proof, water and corrosion resistant according to

IEC-144:IP65 when mated together or IEC-144:IP54 when

mated with others.

ORDERING INFORMATION – "X-HD" Series Male

# of Stainless Steel Shell

Contacts Gold Contacts

3NC3MX-HD NC3MX-HD-B*

* -B version has black boot only (male shell is not black)

ORDERING INFORMATION – "X-HD" Series Female

# of Neoprene Covered Shell with Gold Contacts

Contacts Nickel Shell Black Chrome Shell

3NC3FX-HD NC3FX-HD-B

Male and Female connectors available in 4-7 pin configuration

including 6 pin Switchcraft©equivalent.

Contact Neutrik USA, Inc.®for ordering information.

X-HD Series

The FX-S series offers a noiseless ON/OFF switch which shorts

pins 2 and 3 muting the signal voltage between conductors.

Gold contacts are standard.

ORDERING INFORMATION – "FX-S" Series Male

# of Nickel Shell Black Chrome Shell

Contacts Gold Contacts

3NC3FX-S NC3FX-S-B

FX-S Series

ORDERING INFORMATION – EASYCON – IDC-Male

# of Nickel Shell/ Black Chrome/

Contacts Gold Contacts Gold Contacts

3NC3MEZY-AU NC3MEZY-B

ORDERING INFORMATION – EASYCON – IDC-Female

# of Nickel Shell/ Black Chrome/

Contacts Gold Contacts Gold Contacts

3NC3FEZY-AU NC3FEZY-B

ORDERING INFORMATION – EASYCON – Solder-Male

# of Nickel Shell/ Black Chrome/

Contacts Gold Contacts Gold Contacts

3NC3MEZ-AU NC3MEZ-B

ORDERING INFORMATION – EASYCON – Solder-Female

# of Nickel Shell/ Black Chrome/

Contacts Gold Contacts Gold Contacts

3NC3FEZ-AU NC3FEZ-B

All Easycon is available bulk packed. Add “-D” as suffix when ordering.

Must be ordered in multiples of 100. Contact Neutrik USA, Inc.®for details.

732-901-9488 www.neutrikusa.com

XLR Cable Connectors XLR Cable Connectors

XLR Cable Connectors Specifications XLR Cable Connectors Specifications

"X" Series "X-1" Series "X-14" Series "RC" Series "X-HD" Series

Electrical

Number of contacts: 3-7 X 3 only 3 only X X

Rated current: See table below X X X X X

Contact resistance: <3 mΩXX X XX

Insulation resistance:

• initial: >2GΩXX X XX

• after damp heat test: >1GΩXX X XX

Dielectric strength: 1500 V dc X X X X X

Mechanical

Insertion / withdrawal force: ≤20N X X X X X

Max. wire size: See table below X X X X X

Cable O.D. range: 3.5 mm - 8.0 mm X 4 mm - 7 mm 4 mm - 9.7 mm 4 mm - 7 mm X

Environmental

Temperature range: -30ºC to +80ºC X X X X X

Flammability: UL 94HB X X X X X

Solderability: Complies with IEC 68-2-20 X X X X X

Protection class: N/A N/A N/A N/A IP 65

Materials

Shell: ZnAl4Cu1, gal Ni or black chrome over Cu plating X X X X X

Insert: PA 6.6 30% GR (glass reinforced) X X X X X

Locking ring: ZnAl4Cu1, gal Ni or

black chrome over Cu plating N/A N/A N/A N/A N/A

Contacts:

• female (3 pole) CuSn6 X X X X X

• female (4-7 pole) & male CuZn39Pb3 X X X X X

Contact surface: gal 0.2 µm Au hard

alloy over 2 µm Ni -B versions only N/A N/A -B versions only X

Latch lock: St3K32 (latch)/Ck 67 (spring) X X X X X

Strain relief clamp: POM X X X X X

Antikink boot: PUR X X X X X

XLR Rated Current

# of contacts I [A] {mm2/AWG} C[pF]

316 2.5/14 ≤4

410 1.5/16 ≤7

57.5 1.0/18 ≤7

67.5 1.0/18 ≤7

75 1.0/18 ≤9

Digital XLR "FX-SPEC Series" "EasyCon Series" "FXS" Series

Electrical

Number of contacts: 3-7 3 only 3 only 3 only 3 only

Rated current: See table below X X 6A X

Contact resistance: <3 mΩXX≤6mΩX

Insulation resistance:

• initial: >2GΩXXXX

• after damp heat test: >1GΩXXXX

Dielectric strength: 1500 V dc XXXX

Mechanical

Insertion / withdrawal force: ≤20N XXXX

Max. wire size: See table on previous page X X AWG 26-22 X

Cable O.D. range: 3.5 mm - 8.0 mm X X 5.5 - 7.0 mm X

Environmental

Temperature range: -30ºC to +80ºC XXXX

Flammability: UL 94HB X X N/A X

Solderability: Complies with IEC 68-2-20 XXXX

Protection class: N/A N/A N/A N/A

Materials

Shell: ZnAl4Cu1, X N/A

black chrome over Cu plating N/A X X X

Insert: PA 6.6 30% GR (glass reinforced) XXXX

Locking ring: ZnAl4Cu1, gal Ni or

black chrome over Cu plating N/A X N/A N/A

Contacts:

• female (3 pole) CuSn6 XXXX

• female (4-7) pole & male CuZn39Pb3 X N/A CuZn36Pb1.5 N/A

Contact surface: gal 0.2 µm Au hard XN/A gal 0.1µm AuCo over X

alloy over 2 µm Ni 2µmNiP15(Tribor®)

Latch lock: St3K32 (latch)/Ck 67 (spring) X X N/A X

Strain relief clamp: POM Ni/Su X X X

Antikink boot: PUR X X Pu/EPDM X

732-901-9488 www.neutrikusa.com

A/B Series

ORDERING INFORMATION – "A/B" Series Male – 4 PIN

Gold contacts Termination Plastic Shell Shell w/Ni Ring Shell w/Blk Cr Ring

PCB Mount Horizontal NC4MAH NC4MBH NC4MBH-B

PCB Mount Vertical NC4MAV NC4MBV NC4MBV-B

ORDERING INFORMATION – "A/B" Series Female – 4 PIN

Gold contacts Termination Plastic Shell Shell w/Ni Ring Shell w/Blk Cr Ring Ground

PCB Mount Horizontal NC4FAH NC4FBH NC4FBH-B Pin one & chassis ground separate

PCB Mount Vertical NC4FAV NC4FBV NC4FBV-B Pin one & chassis ground separate

latchless (retention spring instead of PUSH tab) versions of females may be available as special order - add "-0" as suffix when ordering. Contact Neutrik USA, Inc.®for details.

ORDERING INFORMATION – "A/B" Series Male – 5 PIN

Gold contacts Termination Plastic Shell Shell w/Ni Ring Shell w/Blk Cr Ring

PCB Mount Horizontal NC5MAH NC5MBH NC5MBH-B

PCB Mount Vertical NC5MAV NC5MBV NC5MBV-B

ORDERING INFORMATION – "A/B" Series Female – 5 PIN

Gold contacts Termination Plastic Shell Shell w/Ni Ring Shell w/Blk Cr Ring Ground

PCB Mount Horizontal NC5FAH NC5FBH NC5FBH-B Pin one & chassis ground separate

PCB Mount Vertical NC5FAV NC5FBV NC5FBV-B Pin one & chassis ground separate

latchless (retention spring instead of PUSH tab) versions of females may be available as special order - add "-0" as suffix when ordering. Contact Neutrik USA, Inc.®for details.

Mounting Screws

4 and 5 pin A & B Series use part # Screw-2.9m

The 3 pin female receptacles are currently available in

horizontal and vertical PCB mount terminations and offer

three grounding options – no ground, pin 1 and chassis

ground together, or pin 1 and chassis ground separate. The

horizontal PCB mount versions of the male and the female

are also available in lateral right or left pin outs. The 3 pin

male and female receptacles are also offered in an IDC version.

The new 4 & 5 pin versions are recommended for DMX and

lighting applications and are available in horizontal or

vertical PCB mount. The grounding feature for the 4 & 5 pin

females is pin 1 and chassis ground separate. Additional

grounding and latchless versions of the females may be

available as special orders. Please call Neutrik USA, Inc.®for

details.

Color coded identification rings are available - use part #s

ACRF-color and ACRM-color (see page 39). These rings are

available in 9 of the resistor colors (no black) and can be

used on both the “A” and the “B” series.

The A/B series of XLR receptacles offer a variety of standard

features including hard gold contacts. They are the smallest

receptacles on the market today and when mounted side

by side are only 0.90" center to center. These receptacles are

also extremely cost effective, are available in 3, 4 & 5 pin

configurations and a revolutionary tuning fork contact

design is standard on the females.

The “A” series is made of high impact glass reinforced

UL94V-0 plastic. The “B” series features a metal (nickel or

black chrome) mounting flange, which enables continuous

circumferential chassis ground contact for complete EMC

and RF protection.

The 3 pin male “A” series offers either a ground contact

which is connected through the chassis mounting hole to

reduce EMC interference or you can order without the

ground contact. See the ordering information below for

correct part #s.

A/B Series

732-901-9488 www.neutrikusa.com

XLR Receptacles XLR Receptacles

ORDERING INFORMATION – "A/B" Series Male – 3 PIN

Gold Contacts Termination Plastic Shell with ground Plastic Shell without ground Shell w/Ni Ring Shell w/Blk Cr Ring

PCB Mount Horizontal NC3MAH NC3MAH-0 NC3MBH NC3MBH-B

PCB Mount Horizontal Lateral Right NC3MAHR N/A NC3MBHR NC3MBHR-B

PCB Mount Horizontal Lateral Left NC3MAHL N/A NC3MBHL NC3MBHL-B

PCB Mount Vertical NC3MAV NC3MAV-0 NC3MBV NC3MBV-B

IDC NC3MAY N/A NC3MBY NC3MBY-B

Special version of “B” series available w/ additional ground contacts, add “-E” as suffix. Contact Neutrik USA, Inc.®for details. Minimums may be required.

ORDERING INFORMATION – "A/B" Series Female – 3 PIN

Gold Contacts Termination Plastic Shell Shell w/Ni Ring Shell w/Blk Cr Ring Ground

PCB Mount Horizontal NC3FAH* N/A N/A No special ground feature

NC3FAH-1* NC3FBH-1* NC3FBH-1-B Pin one & chassis ground together

NC3FAH-2* NC3FBH-2* NC3FBH-2-B Pin one & chassis ground separate

PCB Mount Horizontal NC3FAHR-1* NC3FBHR-1* NC3FBHR-1-B Pin one & chassis ground together

Lateral Right NC3FAHR-2* NC3FBHR-2* NC3FBHR-2-B Pin one & chassis ground separate

PCB Mount Horizontal NC3FAHL-1* NC3FBHL-1* NC3FBHL-1-B Pin one & chassis ground together

Lateral Left N/A N/A N/A Pin one & chassis ground separate

PCB Mount Vertical NC3FAV* N/A N/A No ground feature

NC3FAV-1* NC3FBV-1* NC3FBV-1-B Pin one & chassis ground together

NC3FAV-2* NC3FBV-2* NC3FBV-2-B Pin one & chassis ground separate

IDC NC3FAY* NC3FBY NC3FBY-B No special ground feature

*W/ retention spring instead of “push” tab add, “-O” as suffix ie. NC3FAH-1-O

Mounting Screws

3 pin A Series use part # Screw-2.9m

3 pin B Series use part # Screw-2.5m

A/B SERIES SPECIFICATIONS 3 PIN 4 PIN 5 PIN

Electrical

Number of contacts: 3 4 5

Rated current: 6A 4A 3A

Rated voltage: 50 Vac X X X

Dielectric strength: 1500 V dc X X X

Contact resistance (measured between soldering points): @10 mA / 1kHz @10 mA / 1kHz @10 mA / 1kHz

• Initial

Female: <5 mΩXXX

Male: <3 mΩXXX

• After salt mist and damp heat test

Female: <7 mΩXXX

Male: <4 mΩXXX

Insulation resistance:

• Initial: >2GΩ@ 500 Vdc X X X

• After salt mist and damp heat test: >1GΩ@ 500 Vdc X X X

Capacity between contacts: ≤4 pF ≤7 pF ≤7 pF

Mechanical

Applicable wire size: IDC Version only N/A N/A

0.22mm2/24 AWG and 0.14mm2/26 AWG

Retention method (female only):

• Standard: latch lock X X X

• "-O" version: retention spring instead of “PUSH” tab X X X

Separating force: 20N ≤F ≤26N X X X

Environmental

Operating temperature: -30ºC to +80ºC X X X

Flammability: UL 94 HB UL 94V-0 X X

Solderability: Complies with IEC 68-2-20 X X X

Materials

Housing:

• A-Series: PA 6.6 30% GR (glass reinforced) X X X

• B-Series (ring): ZnAl4Cu1gal Ni or black chrome X X X

Contacts:

• Female: CuSn6 X X X

• Male: CuZn35Pb2 X X X

Contact surface: gal 0.2 µm AuCo over 2 µm NiP15 (Tribor) X X X

Latch lock & spring: Ck 67 steel, treated X X X

XLR Receptacles Specifications

1110

XLR Receptacles

732-901-9488 www.neutrikusa.com

This connector consists of an insert and shell which lock

together using a “00” size flathead screwdriver (part # SD-1)

after assembly. The ability to order the inserts and shells sep-

arately allows the user to choose the best combination for

any application. PCB mount horizontal (right angle),

vertical, or solder springs are the available terminations.

RF protected via 3 point coaxial ground contact to the shell

of mated connectors. Available accessories are the same as

for the “D-L-1” series (see page 39).

ORDERING INFORMATION – "D" Series Male

# of Nickel Black Chrome

Contacts Silver Silver Gold Termination

3NC3MD-H NC3MD-H-BAG NC3MD-H-B PCB Mount Horizontal

3NC3MD-V NC3MD-V-BAG NC3MD-V-B PCB Mount Vertical

3NC3MD-L NC3MD-L-BAG NC3MD-L-B Solder Springs

ORDERING INFORMATION – "D" Series

Inserts/Shells Female

Inserts Shells

# of Black Black

Contacts Silver Gold Termination Nickel Chrome Plastic

33FD-H-I 3FD-H-I-B PCB Mt Horiz DH-NF** DH-NF- DHP

BAG**

33FD-H-I-0 N/A PCB Mt Horiz DH-NF-0** DH-NF-

BAG-0**

33FD-L-I 3FD-L-I-B Solder Spring

33FD-L-I-0 N/A Solder Spring

33FD-V-I 3FD-V-I-B PCB Mt Vert

33FD-V-I-0 N/A PCB Mt Vert

-0 = Latchless - retention spring instead of "push" tab

D Series

ORDERING INFORMATION – "D" Series Female

# of Nickel Black Chrome

Contacts Silver Silver Gold Termination

3NC3FD-H NC3FD-H-BAG NC3FD-H-B PCB Mount Horizontal

3NC3FD-V NC3FD-V-BAG NC3FD-V-B PCB Mount Vertical

3NC3FD-L NC3FD-L-BAG NC3FD-L-B Solder Springs

ORDERING INFORMATION – "D" Series

Inserts/Shells Male

Inserts Shells

# of Black Black

Contacts Silver Gold Termination Nickel Chrome Plastic

33MD-H-I 3MD-H-I-B PCB Mt Horiz DH-NM** DH-NM- DHP

BAG**

33MD-L-I 3MD-L-I-B Solder Spring

33MD-V-I 3MD-V-I-B PCB Mt Vert

** Shells available with M3 threads add “-M3” as suffix when ordering. Minimums may be required. Contact Neutrik USA, Inc.®for details.

One piece metal shell panel receptacle with large solder

cups. The insert is non-removable. The “P” Series is front

mountable only and the male and female have different

mounting dimensions.

ORDERING INFORMATION – "P" Series Male

# of Nickel Shell Black Chrome Shell

Contacts Silver Contacts Silver Contacts Gold Contacts

3NC3MP NC3MP-BAG NC3MP-B

4NC4MP NC4MP-BAG NC4MP-B

5NC5MP NC5MP-BAG NC5MP-B

6NC6MP NC6MP-BAG NC6MP-B

Male “P” Series not available in 6 pin Switchcraft©equivalent or

7 pin configurations

ORDERING INFORMATION – "P" Series Female

# of Nickel Shell Black Chrome Shell

Contacts Silver Contacts Silver Contacts Gold Contacts

3NC3FP-1 NC3FP-1-BAG NC3FP-1-B

4NC4FP-1 NC4FP-1-BAG NC4FP-1-B

5NC5FP-1 NC5FP-1-BAG NC5FP-1-B

6NC6FP-1 NC6FP-1-BAG NC6FP-1-B

6* NC6FPS-1 N/A N/A

7NC7FP-1 N/A NC7FP-1-B

*Switchcraft©equivalent

P Series

In this series the male and female fit in the same hole cut

out and are front or rear mountable. The “D-L-1” Series

features a one piece unit with solder cup terminations. This

series is very cost effective. Accessories include male and

female rubber dust covers (SCDF or SCDM), DBA blank plastic

plate, and DSS color coded labeling plates (see page 39).

ORDERING INFORMATION – "D-L-1" Series Male

# of Nickel Shell Black Chrome Shell

Contacts Silver Contacts Silver Contacts Gold Contacts

3NC3MD-L-1 NC3MD-L-1-BAG NC3MD-L-1-B

4NC4MD-L-1 NC4MD-L-1-BAG NC4MD-L-1-B

5NC5MD-L-1 NC5MD-L-1-BAG NC5MD-L-1-B

6NC6MD-L-1 NC6MD-L-1-BAG NC6MD-L-1-B

6* NC6MDS-L-1 N/A NC6MDS-L-1-B

7NC7MD-L-1 N/A NC7MD-L-1-B

ORDERING INFORMATION – "D-L-1" Series Female

# of Nickel Shell Black Chrome Shell

Contacts Silver Contacts Silver Contacts Gold Contacts

3NC3FD-L-1 NC3FD-L-1-BAG NC3FD-L-1-B

3NC3FD-L-1-0 NC3FD-L-1-BAG-0 N/A

4NC4FD-L-1 NC4FD-L-1-BAG NC4FD-L-1-B

5NC5FD-L-1 NC5FD-L-1-BAG NC5FD-L-1-B

6NC6FD-L-1 NC6FD-L-1-BAG NC6FD-L-1-B

6* NC6FDS-L-1 N/A NC6FDS-L-1-B

7NC7FD-L-1 NC7FD-L-1-BAG NC7FD-L-1-B

-0 = Latchless retention spring instead of "push" tab.

*Switchcraft©equivalent

Parts may also be available with M3 threads. Minimums may be required.

Contact Neutrik USA, Inc.®before ordering.

D-L-1 Series

1312

The PP series is a cost effective alternative for your XLR

panel receptacle needs. Made in a black plastic housing

with solder cup terminations, the PP series fits in the same

mounting hole as our D-L-1 series. The female is latchless

and both male and female are available with 3 contacts

as standard. Accessories are the same as for the “D-L-1”

series (see page 39).

ORDERING INFORMATION – "PP" Series Male

# of Black Plastic Shell

Contacts Silver Contacts

3 only NC3MPP

ORDERING INFORMATION – "PP" Series Female

# of Black Plastic Shell

Contacts Silver Contacts

3* NC3FPP

* Females available w/ 4-7 contacts in US only. Minimums may be required.

Contact Neutrik USA, Inc.®for details.

PP Series

Featuring 4 or 5 pin PCB mount horizontal (right angle)

or vertical contacts. One piece unit allows male and

female to mount in same hole cutout. Rear mountable

only. Available accessories are the same as for the

“D-L-1” series (see page 39).

ORDERING INFORMATION – "DM3" Series Male

# of Nickel Shell Black Chrome Shell

Contacts Silver Contacts Termination

4NC4MDM3-H NC4MDM3-H-BAG PCB Mount Horizontal

(Rt. Angle)

5NC5MDM3-H NC5MDM3-H-BAG PCB Mount Horizontal

(Rt. Angle)

5N/A NC5MDM3-V-BAG PCB Mount Vertical

ORDERING INFORMATION – "DM3" Series Female

# of Nickel Shell Black Chrome Shell

Contacts Silver Contacts Termination

4NC4FDM3-H NC4FDM3-H-BAG PCB Mount Horizontal

(Rt. Angle)

5NC5FDM3-H NC5FDM3-H-BAG PCB Mount Horizontal

(Rt. Angle)

5N/A NC5FDM3-V-BAG PCB Mount Vertical

Special orders may be available. Minimums required.

Contact Neutrik USA, Inc.®before ordering.

DM3 Series

732-901-9488 www.neutrikusa.com

XLR Receptacles XLR Receptacles

1514

Jacks and Plugs

"P" SERIES "D-L-1" SERIES "PP" SERIES "D" SERIES "DM3"

Electrical

Number of contacts:

• Female: 3-7 3-7 3* 3 only 4-5

• Male: 3-6 3-7 3 only 3 only 4-5

Rated Current: See table on page 8 X X X 6A X

Rated voltage: 250 V ac X X X X X

Contact resistance: ≤5 mΩXX XXX

Insulation resistance

• Initial: >2GΩXX XXX

• after damp heat test: >1GΩXX XXX

Dielectric strength: 1500 V dc X X X X X

Mechanical

Insertion / withdrawal force: ≤20N / ≤10N X X X X X

Max. wire size: See table on page 6 X X X "-L" version only N/A

Retention method (Female versions only):

• Standard: latch lock X X N/A X X

• "-O" version: retention spring (3 pin female only) N/A X X X N/A

Separating force: ≥20N X X X X X

Environmental

Temperature range: -30ºC to +80ºC X X X X X

Flammability: UL 94HB X X X X X

Solderability: Complies with IEC 68-2-20 X X X X X

Materials

Shell: ZnAlCu1, gal Ni or black chrome plating X X X ZnAl4Cu1 X

Insert: PA 6.6 30% GR (Glass Reinforced) X X X X X

Contacts:

• female (3-pole): CuSn6 X X X X X

• female (4-7-pole) & male: CuZn39Pb3 X X X X X

Contact surface (over 2µm Ni):

• Gold: gal 0.2 µm Au hard alloy X X N/A X X

• Silver: gal 2µm Ag X X X X X

Latch lock & spring: Ck 67 steel, treated X X N/A X X

*Females available in

4-7 pins in US only.

Call Neutrik USA, Inc.®for details.

Minimums may be required.

XLR Receptacles Specifications

732-901-9488 www.neutrikusa.com

This series features the NEUTRIK®innovation of a securely

locking 1/4" cable jack with latch release. Mates with all

mono or stereo plugs specified to EIA RS-453. Able to handle

cable OD up to 8mm.

ORDERING INFORMATION – “NJ3FC6” SERIES

# of Nickel Shell Black Chrome Shell

Contacts Silver Contacts Contacts

3NJ3FC6 NJ3FC6-BAG TRS

NJ3FC6 Series

This series of panel mount locking 1/4" chassis jacks

with solder terminations is made to mount in the same

hole cutout out as our “D” and NL4MP series of panel

mount receptacles. Options include a plastic shell and

FastOn®solder tabs versions. Contact factory for ordering

information.

ORDERING INFORMATION – “NJ3FP6C” SERIES

# of Nickel Shell Black Chrome Shell Plastic Shell

Contacts Silver Contacts Contacts

3NJ3FP6C NJ3FP6C-BAG NJ3FP6C-P TRS

NJ3FP6C Series

Vertical mounting PCB jacks come in either standard 1/4"

(FD) or long frame mil gauge (TB) versions. These jacks

feature a snap on/twist off cap which drastically reduces

assembly times. The retention force is provided by a

special spring element which is independent of the contacts.

Compact design allows more jacks in less space.

ORDERING INFORMATION – NJ*FD/TB-V Series

Vertical Jacks

# of STD 1/4” MIL Gauge

Contacts Gold Contacts Gold Contacts Contacts

2NJ2FD-V N/A TS

3NJ3FD-V N/A TRS

5NJ5FD-V N/A T,TN,R,RN,S

6NJ6FD-V NJ6TB-V T,TN,R,RN,S,SN

NJ*FD/TB-V Series

NOTE: Additional 1/4" jacks can be found in the NYS Series Product Guide

1716

Jacks and Plugs

NP*C Series These 1/4" professional phone plugs are

available in mono (2 contacts/TS) or stereo (3 contacts/TRS),

according to EIA RS453. Features include a diecast metal

shell and unique NEUTRIK®chuck type strain relief. Straight

and right angle versions available. BSP boots and PCR rings

offered for color coding (see page 39).

NP*RCS A slim right angle version of our standard 1/4"

professional phone plug. The NP*RCS versions feature a

narrow profile and a solder or solderless ground wire. BSP

boots offered for color coding (see page 39).

ORDERING INFORMATION – Mono (TS) 1/4" Plugs

# of Nickel Shell Black Chrome Shell

Contacts Nickel Contacts Nickel Contacts Gold Contacts Contacts

2NP2C NP2C-BAG NP2C-B TS

2N/A NP2C-BAG-D* N/A TS

2NP2C-T10AA NP2C-T10AA-BAG N/A TS**

2NP2L NP2L-BAG N/A TS

2NP2RCS N/A N/A TS

**W/ 1:10 transformer to convert mic level to guitar inputs

ORDERING INFORMATION – Stereo (TRS) 1/4" Plugs

# of Nickel Shell Black Chrome Shell

Contacts Nickel Contacts Nickel Contacts Gold Contacts Contacts

3NP3C NP3C-BAG NP3C-B TRS

3NP3C-D* NP3C-BAG-D* N/A TRS

3NP3RCS N/A N/A TRS

*Bulk packaged – must be ordered in multiples of 100

1/4" Plugs

NEUTRIK®offers a variety of plug fingers to meet mil spec

applications. All versions feature a metal shell in black (-B) or

red (-R) and unique NEUTRIK®chuck type strain relief.

Assembly is quick with no rivets or screws to worry about.

ORDERING INFORMATION – Mil Gauge Series

# of Coated Brass Shell Mil. Spec

Contacts Silver Contacts Gauge Diameter Contacts

3 NP3TB-B or -R BPO 316 .250” TRS

3NP3TM-B or -R 642/2 .250” TRS

2NP2CM-B or -R # 642/4 .250” TS

3NP3CM-B or -R # 642/5 .206” TRS

# Also available as plug fingers only in Nickel or Brass for overmolding.

These bantam size (4.4mm/0.173") miniature stereo plugs

have recently been redesigned to be crimped with any

standard RG58 crimp tool. The gold contact version when

used with our NJ3TTA jacks (see page 31) eliminates mating

problems due to corrosion or dirt.

ORDERING INFORMATION – “NP3TT” Series

# of Plastic Sleeve Sleeve

Contacts Silver Contacts Gold Contacts Color Contacts

3NP3TT-P-B NP3TT-P-B-AU Black TRS

3NP3TT-P-R NP3TT-P-R-AU Red TRS

3NP3TT-2 N/A Black TRS

Military Gauge Series

NP3TT Series

NJ3FC6 SERIES NJ3FP6C SERIES NJ*FD/TB-V SERIES

Electrical

Rated current: 10 A X X 3A

Rated current switch contact N/A N/A 0.25 A @ 12 V

Contact resistance:

• Initial: <6 mΩXX<10 mΩ

• After life test: <15 mΩXX<20 mΩ

Insulation resistance

• Initial: >2GΩXX>1GΩ@ 500 v dc

• After damp heat test: >1GΩXXX

Rated switch contact resistance: N/A N/A <15 mΩ

Dielectric strength: 1.5 kV dc X X 1000 V dc

Mechanical

Life: >10,000 cycles X X X

Insertion/Withdrawal force: <19N / <22N X X <10N / >8N

Locking force: >80N X X N/A

Wire size: 1 mm2/ 18 AWG max for soldering tag X X N/A

Cable O.D.: 3.5 mm - 8.0 mm X N/A N/A

Cap opening torque: 25N cm / 9.84N in N/A N/A X

Panel thickness N/A N/A 1.2 - 1.5 mm (0.047 - 0.06")

Environmental

Temperature range: -20ºC to +65ºC X X X

Solderability: Complies with IEC 68-2-20 X X X

Materials

Shell: ZnA/4Cu1 nickel plated or black chrome X X N/A

PA 6.6 30% GR N/A X X

Insulation: PA 6.6 30% GR X X X

Contacts: CuBe2 / CuZn37 (ground) 2 µm Ag plated X X N/A

CuSn6 N/A N/A 0.2 µm Au over 2 µm Ni

Chuck: POM X N/A N/A

Cap: POM N/A N/A X

Bushing: PA 6.6 15% GR + PUR X N/A N/A

Applicable Standard Compability

EIA RS 453 X X NJ*FD-V

B Gauge BPO316 / MIL-J-641/3 N/A N/A NJ*TB-V

Jacks Specifications

732-901-9488 www.neutrikusa.com

NOTE: Additional 1/4" plugs can be found in the NYS Series Product Guide

Combo

1918

NP2C NP3C NP*RCS MIL GAUGE NP3TT

SERIES SERIES SERIES SERIES SERIES

Electrical

Rated current: depends on mating connector XXXXX

Contact resistance: depends on mating connector XXXXX

Insulation resistance:

• Initial: >2GΩXXXXX

• After damp heat test: >1GΩXXXXX

Dielectric strength:

• 1.5 kV dc X N/A 2 pole X N/A

• 1 kV dc N/A X 3 pole N/A X

Mechanical

Wiring: solder terminals XXXXTip & ring

Solderless ground N/A N/A X N/A N/A

Sleeve: HEX crimp (5.4 mm) acc. to IEC 803 N/A N/A N/A N/A X

Wire size: 1 mm2/ AWG 18 XXXX0.25 mmm2/ 24 AWG

0.5 mm2/ AWG 20 N/A N/A N/A NP3CM N/A

Cable O.D.: 4 – 7 mm XXXX4.8 mm

8 mm / .315" NP2L N/A N/A N/A N/A

Environmental

Temperature range: -20ºC to +65ºC XXXXX

Solderability: complies With IEC 68-2-20 X XXXX

Materials

Shell: ZnAl4Cu1, Ni or black chrome plated X X Ni plated only N/A N/A

PA 6.6 50% GR N/A N/A X N/A N/A

PA 6.6 30% GR N/A N/A N/A N/A X

Brass CuZn 39 Pb3, black/red coated N/A N/A N/A X N/A

Insulation: PA 6.6 30% GR XXXXX

Contacts: CuZn39Pb3, 2µm Ni (Su) plated XXXXX

CuZn39Pb3, 0.2µm Au NP2C-B N/A N/A N/A N/A

CuSn6, 2µm Ni (SU) Plated N/A N/A N/A N/A X

2µm TRIBOR‚ (NiP-AuCo) N/A N/A N/A N/A X

Chuck: POM XXXXN/A

Bushing: POM + PU X X X N/A N/A

Plugs Specifications

732-901-9488 www.neutrikusa.com

In the past consoles and amplifiers were furnished with two

input receptacles per channel: a balanced 3 pin female XLR

receptacle and a 1/4" phone jack. In the majority of cases,

only one input was used at one time. Keeping with the

NEUTRIK®view of innovation, the Combo connector was

born – a combined XLR female 3 pin receptacle and 1/4"

phone jack in one! This unique connector accepts balanced

and line inputs or instrument inputs–all in one unit of panel

space!

The Combo is now more compact and cost effective than

ever. In response to customer feedback, a solder cup version

has been added. The standard vertical and horizontal PCB

terminations have new and improved contacts.

The 1/4" jack is available in mono, stereo, or stereo-

switching. Another new feature is the availability of a

switching XLR ground contact. The jack retention force is

delivered by a special element which is completely

separate from the jack.

Available in locking (latching) or non-locking (latchless)

versions, the Combo is digital capable due to the low

capacity of the conductors.

Mounting Screws – use part # Screw-2.9m

Combo

COMBO Series Specifications

Electrical

Number of contacts: 3 XLR; TRS, G, TN, RN, SN & optional switched

XLR grd contact (GN)

Rated current: XLR=7.5A Jack contacts=3A

Rated voltage: 125 V ac

Contact resistance: • XLR: <10 mΩ• Jack: <20 mΩ

Insulation resistance: • After damp heat test: >0.5GΩ

Dielectric strength: 1500 V dc

Capacitance: >2pF

Mechanical

Engagement / • XLR: <10N / >15N

separation force: • Jack: <15N / >15N

Environmental

Temperature range: -20ºC to +66ºC

Flammability: UL94HB

Solderability: Complies with IEC 68-2-20

Materials

Shell: Polyamid, PA 6.6 30% GR

Contacts: • Jack and XLR: CuSn6

Contact plating: • XLR and switch contacts: galv. Au

• Jack and ground: galv. Ag

ORDERING INFORMATION – Combo Series

Combined XLR Receptacle and 1/4" Phone Jack

Description Horizontal PCB Vertical PCB Solder Cups Jack Contacts

3 pole female XLR / nonswitching mono-jack NCJ5FI-H NCJ5FI-V NCJ5FI-S T,S,G

3 pole female XLR / nonswitching stereo-jack NCJ6FI-H NCJ6FI-V NCJ6FI-S T,R,S,G

3 pole female XLR / switching (normalling) stereo-jack NCJ9FI-H NCJ9FI-V NCJ9FI-S T,R,S,G,TN,RN,SN,

3 pole female XLR / switching ground and stereo-jack NCJ10FI-H NCJ10FI-V NCJ10FI-S T,R,S,G,TN, RN, SN, GN

Add “-O” as suffix to any part for latchless version (retention spring instead of “Push” Tab). i.e. NCJ6FI-H-0

Speakon®2-Pole Speakon®4-Pole Cable and Adapters

Speakon®is not to be used as a “main” (AC) connector.

Speakon®8-Pole Speakon®4-Pole Chassis

Speakon®panel receptacles with solder terminations also

allow you to use quick disconnect type terminals (Faston®)

for easy and reliable assembly. These quick disconnects can

be ordered from Neutrik USA, Inc.®- use part # NL-FASTON.

Speakon 4 pole receptacles are available with PCB vertical

and horizontal terminations or screw terminals. A new

increased current version is also available. OEM specials may-

be available, please contact Neutrik USA, Inc.®for details.

The contacts in this series are touch proof and designed to

prevent damage from arcing if disconnected under load.

Ensuring fail safe conditions for both the equipment and the

operator, Speakon®meets the prevailing safety standards of

IEC65, IEC348, CE, CSA and are UL rated (file #E135070).

This series of professional speaker and amplifier connectors

is recognized as the industry standard. The Speakon®

product line features 2, 4 and 8 pole versions.

Patent protected, reliable, cost effective, and extremely

durable the Speakon®system offers the “quick lock” locking

system and recently redesigned inserts on its cable ends.

The inserts feature solderless connections using new

pozidrive and slot combination screw terminals with a capti-

vated pressure plate. No special tools are required making

these connectors 100% field repairable. We do offer a

screwdriver as an accessory - use part # SD-NLP for your

convenience.

Speakon®

2120

Wiring Suggestions

Positive signal on speaker pin “+” produces positive waveform from driver (moves cone outwardly)

“+” = In phase (high) “-” = Ground (out of phase, low)

Lower numbers for lower frequencies

Amplifier Cable Speaker

Stereo One NL4MP socket NL4FC on amplifier end, four one NL4MP per speaker

(“HiFi”) left channel pins 1+/1- conductor cable splits into two pairs left speaker pins 1+/1-

right channel pins 2+/2- with NL4FC on each end right speaker pins 2+/2-

POWER (“PA”) three NL4MP socket A two-conductor cable for each NL4MP pin 1+ to speaker coil “+”

Standard “A” socket: left channel pins 1+/1- channel with NL4FC on both ends NL4MP pins 1- and 2+ to speaker coil “-”

“B” socket: right channel pins 1+/1-

Bridged mono “M” socket: A special two conductor cable, on NL4MP pin 1+ to speaker coil “+”

left channel pins 1+/1- both ends wired to pins 1+/2+ of NL4FC NL4MP pins 1- and 2+ to speaker coil “-”

right channel pins 2+/2-

Bi-Amp one NL4MP socket a four-conductor cable on both ends one NL4MP socket

low frequency pins 1+/1- wired to pins 1+/1-, 2+/2- of NL4FC low frequency pins 1+/1-

high frequency pins 2+/2- high frequency pins 2+/2-

Schematics available online – www.neutrik.com in the FAQ section – or by fax from Neutrik USA, Inc.®

Neutrik has added to the Speakon®line with the 2002 introduction of the STX and SPX series.

Information is available on a separate brochure or on our website – www.neutrikusa.com – or contact Neutrik USA, Inc.®for details.

ORDERING INFORMATION – Speakon®

Type Terminations Description 2 pole 4 pole 8 pole

Cable Screw quicklock feature NL2FC NL4FC NL8FC

Screw with quicklock feature & gold contacts – all black body N/A NL4FC-B N/A

Chassis Solder / Faston airtight – square flange NL2MP NL4MP N/A

Solder / Faston airtight – square flange – mounting holes in opposite corners N/A NL4MP-2 N/A

Solder / Faston airtight – square flange & gold contacts N/A NL4MP-B N/A

Solder / Faston airtight – round flange – all plastic N/A NL4MPR N/A

Solder / Faston airtight – round flange – nickel bezel N/A N/A NL8MPR

Solder / Faston airtight – round flange – black chrome bezel N/A N/A NL8MPR-BAG

Vertical PCB airtight – square flange NL2MD-V NL4MD-V N/A

Vertical PCB airtight – square flange – grey housing – mtg holes for self tapping screws N/A NL4MD-V-1 N/A

Vertical PCB airtight – square flange – mounting holes in opposite corners N/A NL4MD-V-2 N/A

Vertical PCB airtight – round flange – all plastic N/A NL4MPR-V N/A

Vertical PCB airtight – round flange – nickel bezel N/A N/A NL8MD-V

Vertical PCB airtight – round flange – black chrome bezel N/A N/A NL8MD-V-BAG

Horizontal PCB airtight – square flange NL2MD-H NL4MD-H N/A

Horizontal PCB airtight – square flange – mounting holes in opposite corners N/A NL4MD-H-2 N/A

Horizontal PCB airtight – round flange – nickel bezel N/A N/A NL8MD-H

Horzontal PCB airtight – round flange – black chrome bezel N/A N/A NL8MD-H-BAG

Solder / Faston airtight – handles 40A for audio or 50A for audio w/2 contact load N/A NL4MP-UC N/A

Screw airtight – no special tools required – ideal for field applications N/A NL4MP-ST N/A

Boot drip boot for wet environments – use with NL4FC N/A BSL-WR N/A

Adapter coupler for cable extensions NL4MMX NL4MMX NL8MM

4 pole Speakon to 1/4” - connects +1 to Tip, -1 to Sleeve NA4LJ NA4LJ N/A

Accessories Mounting screws to mount chassis connectors to panel Screw-2.9m Screw-2.9m Screw-2.9m

4.8mm x 0.5mm tab for use with solder type receptacles NL-FASTON NL-FASTON NL-FASTON

732-901-9488 www.neutrikusa.com

Speakon®Speakon®

SPEAKON®Series Specifications

NL*FC NL*MP NL*MPR NL*MD

Electrical

Rated current/contact:

30A rms continuous / 40A rms 1 minute X X X X

50A rms continuous for audio signal w/2 contacts N/A NL4MP-UC N/A N/A

Dielectric Strength: 4KV peak X X X X

Rated voltage: 250V ac (Speakon is not to be used as an AC mains connector) X X X X

Contact resistance:

<3 mΩafter 5,000 insertion/withdrawals X X X X

<10 mΩafter 5,000 insertion/withdrawals NL4MD-H

Insulation resistance: 250 V ac

initial: >2GΩXXXX

after damp heat test: >1GΩXXXX

Inrush/outrush current capability (12v source): 300/30 A/200 ms X X X X

Creepage distance is according to IEC 664-1 X X X X

Mechanical

Retention method - quicklock with latch X N/A N/A N/A

Cable anchoring - Neutrik chuck principle X N/A N/A N/A

Cable OD range:

6 - 10 mm NL2FC N/A N/A N/A

6 - 15 mm: white chuck (6 - 11mm); black chuck (9.5 - 15mm) NL4FC N/A N/A N/A

8 - 20 mm: w/reducing sleeve (8 - 15mm); w/o sleeve (15 - 20mm) NL8FC N/A N/A N/A

Cable retention force of >220N is subject to cable diameter & material X

Wiring:

chassis: solder = flat tabs for Faston 4.8mm x 0.5mm (.187") N/A X X N/A

chassis: solder = flat tabs for Faston 6.3mm x 0.8mm (.25") N/A NL4MP-UC N/A N/A

chassis: PCB pins 1.6mm x 0.5mm N/A N/A NL4MPR-V X

chassis: screw terminals - 4mm2/ AWG12 N/A NL4MP-ST N/A N/A

Material

Contacts: CuZn39Pb3/CuSn8 4um Ag plated X X X X

Securing element: ZnAl4Cu1, Ni plated X

Spring element: Neoprene ring N/A X X X

Housings:

PA 6 30% GR X X NL4MPR (all) NL4MD (all)

ZnAl4Cu1, Ni or black chrome plated NL8MPR (all) NL8MD (all)

Insert: PBTP 20% GR X N/A N/A N/A

Boot: PA 6 15% GR X N/A N/A N/A

Chuck: POM X N/A N/A N/A

Temperature Range = -30° C to +80° C X X X X

PowerCon®

PowerCon®is a lockable 3 pole equipment (AC) connector

with contacts for line, neutral, and premating safety

grounds. It is rated at 20A/250V ac. Color coded for easy

identification, PowerCon®offers power-in (blue) and power-

out (grey) versions with different keying to avoid the possi-

bility of short circuiting. The contacts are designed to prevent

damage from arcing when disconnected while under load.

PowerCon®is not designed to be a “mains” connector or

for speaker/amplifier applications. For speaker/applications

please see Speakon on pages 20-22.

This series of connectors is rugged and reliable and is UL

recognized, SEV and VDE approved and meets prevailing

safety standards.

The cable ends use the “quick-lock” latch for fast and easy

locking. PowerCon®inserts feature solid contacts with screw

type terminals. No special assembly tools are required. The

chassis connectors have large solder tabs which accept

FastOn®type quick disconnects for even easier hard wiring.

PowerCon®meets or exceeds the demands of applications in

the fields of A/V usages, test and measurement equipment,

computers, or industrial designs.

ORDERING INFORMATION – PowerCon®

Description Part #

A-type: for power in B-type: for power out

(Blue) (Gray)

Cable connector, quick

lock with securing lever NAC3FCA NAC3FCB

Chassis connector, air tight NAC3MPA NAC3MPB

Coupler for linking cables

(Couples NAC3FCA to NAC3MM

NAC3FCB)

PowerCon®

POWERCON®Specifications

UL-Recognized (E 135070) VDE rated (6360) SEV approved (No. 96.1 10096)

Electrical

Number of contacts: 3

Rated current/contact: 20 A rms @ wire size 2.5 mm2

Rated Voltage: 250 V ac

Contact resistance after 5000 insertion-withdrawal operations: ≤3 mΩ

Insulation resistance: • Initial: >2GΩ• After damp heat test: >100MΩ

Creepage distance: according to IEC 664-1

Safety ground: Premating

Dielectric strength: 4 KV peak

Mechanical

Wiring:

• Cable: screw-type terminals or soldering

Max wire size/contact: 4 mm2/ 12 AWG (stranded)

• Chassis: flat tabs for FASTON®‚ 0.187" x 0.02"

(4.8mm x 0.5mm) or soldering

Cable OD range: 5-15mm

• White chuck: 5mm (.19") – 11mm (.433)

• Black chuck: 9.5mm (.374") – 15mm (.787")

Cable anchoring: NEUTRIK®‚ chuck principle

Cable retention force: ≥220N, depending on cable diameter and material

Retention method: Quicklock with securing lever

Environmental

Temperature range: -30ºC to +80ºC

Materials

Housing: PA 6 30% GR

Insert (FC part): PBTB 20% GR

Bushing: PA 6.6 15% GR

Chuck: POM

Contact: CuZn39Pb3 / CuSn8, 4µm/20mm Ag plated

Securing lever: ZnAl4Cu1, CuNi plated

2322

732-901-9488 www.neutrikusa.com

NanoCon®is the smallest – measuring just 0.236" in diameter

x 1.22" (6mm x 31mm) – lockable multi-pin connector in the

world! Another member of the Neutrik®family of miniature

circular connectors, NanoCon®offers a selective load of 1 - 3

gold contacts in mating cable ends, PCB vertical or horizon-

tal male and female receptacles, or male and female solder

termination receptacles.

The machined metal nickel plated housings hold inserts

which contain machined gold contacts. Pin #1 mates first,

breaks last. Panel receptacles with blank inserts, mating

cable ends with interchangeable inserts and fully loaded

PCB receptacles are available.

ORDERING INFORMATION – NanoCon®

Cable Connectors

Description Female Male

Cable housing – nickel with boot & chuck NSC NSC

Insert – unloaded must order contacts separately NF3 NM3

Solder contacts – gold NBS NPS

Mating cable housing – nickel with boot & chuck NMC NMC

NanoCon®

The NanoCon®cable connectors utilize the unique Neutrik®

chuck type strain relief and all housings have polarizing

guides for ease of assembly and then mating.

These micro connectors are manufactured without

jeopardizing quality or reliability. The versatility of the

NanoCon®system allows them to be used in a variety

of audio and industrial applications such as wireless mics,

control systems, or PCB interface cards.

ORDERING INFORMATION – NanoCon®

Receptacles

Description Female Male

Receptacle housing with insert – must order contacts NR3F NR3M

Solder contacts – gold NBS NPS

Receptacle – vertical PCB mount – complete with contacts NP3F-V NP3M-V

Receptacle – horizontal PCB mount – complete with contacts NP3F-H NP3M-H

Neutricon®is a modular system with a minimum of parts

offering the user a maximum of variations.

The male and female inserts can be selectively loaded

with 1 - 8 gold contacts for solder, crimp (according to

MIL-C22520F) or PCB vertical terminations.

Assembly is quick and easy and requires no screws. Your

choice of a nickel or black chrome plated receptacle or cable

end housing absorbs vibrations and mechanically protects

the contacts. These housings offer 90° or 180° polarizing

guides to fit your application needs.

ORDERING INFORMATION – Neutricon®

Cable Connectors

Description Female Male

Cable housing, Nickel# SC-8Ni SC-8-Ni

Cable housing, Black Chrome# SC-8 SC-8

Strain relief & Boot SR-8 SR-8

Strain relief & Boot w/ crimp SR-8A / 3-3.8mm SR-8A / 3-3.8mm

ferrule for coaxial grounding SR-8B / 6-7mm SR-8B / 6-7mm

Inserts FI-8 MI-8

Contacts • Solder BS1 PS1

• Crimp BC1 PC1

• Blank BB1 N/A

Mating Cable End – Cable Housing# MC-8 MC-8

Cable housing boot for color coding BSP-* BSP-*

* Available in ten resistor colors

(see page 39).

Must order w/ SR-8 for strain relief.

For additional Ordering Information please go to www.neutrik.com in the

TECHNICAL SUPPORT section under ASSEMBLIES

Neutricon®

The cable connectors utilize the unique Neutrik®chuck type

strain relief, will accommodate cable diameters of 3-7mm,

and are equally suitable for flat ribbon cables. Additional

crimp ferrules for coaxial shield terminations are available as

an option.

The Neutricon®non-threaded, self-activating, push-pull

locking system is vibration proof. A splash proof version

(per IP65) is available, just contact Neutrik USA, Inc.®for the

details. Color coded boots (use part # BSP-color – see page

39) are an optional accessory.

ORDERING INFORMATION – Neutricon®

Receptacles

Description Female Male

Housing, Nickel# RP-8Ni RP-8Ni

Housing Black Chrome# RP-8 RP-8

Inserts FI-8 MI-8

Contacts • Solder BS1 PS1

• Crimp BC1 PC1

• PCB (vertical) BP1 PP1

• Blank BB1 N/A

# Available in 90° or 180° polarization. 180º version is standard. Add “-1” as suffix

for 90° version.

Polarization

Shell: Two variations of metal polarizing guides (180º / 90º)

180º 90º

SC-8 SC-81

MC-8 MC-81

RP-8 RP-81

2524

732-901-9488 www.neutrikusa.com

Miniature Circular Connectors Miniature Circular Connectors

NBS

NPS

NF3

NM3

NSC

NBS

NPS

NR3F

NR3M

NP3F-V

NP3M-V

NP3F-H

NP3M-H

Contacts Insert Housing

MiniCon®is a compact miniature circular connector of

modular design. It offers a select load combination of

contacts from 1-12.

Offering a precisely machined, rugged, all metal design,

MiniCon®features fully loaded male and female PCB

horizontal or vertical receptacles, male and female recep-

tacles for crimp or solder contacts and a cable housing with

optional crimp ferrules for coaxial shield terminations.

The cable connectors accept a wide range of cable diameters

(2-7mm) and cable protection is afforded by the unique

Neutrik®chuck type strain relief.

MiniCon®

Assembling the inserts is quick as the contacts “snap in” to

place from the rear. Loaded inserts are seated into their

housings correctly every time using the Neutrik®keying

method. Once assembled, it is the push-pull locking system

that mates these connectors. Pin #1 makes ground first,

breaks last.

The MiniCon®system is extremely cost effective and fits a

wide variety of applications in the medical, instrumentation,

industrial, and audio fields.

Miniature Circular Connectors Miniature Circular Connectors Specifications

ORDERING INFORMATION – MiniCon®

Cable Connectors

Description Female Male

Cable housing (including chuck and boot) MSC MSC

Insert MFI MMI

Contacts: 1-12 contacts – crimp MBC MPC

user selectable – solder MBS MPS

Accessories

– Set of strain relief crimp ferrules, for Cable OD: MSRC

2.5 – 3.2 mm

3.3 – 4.4 mm

4.5 – 6.0 mm

Includes boot with larger rear cable opening

ORDERING INFORMATION – MiniCon®

Receptacles

Description Female Male

Receptacle housing with insert -

must order contacts separately MRF MRM

Contacts: 1-12 contacts – crimp MBC MPC

user selectable – solder MBS MPS

PCB receptacle (12-pole) – Vertical MPF12-V MPM12-V

Completely assembled – Horizontal MPF12-H MPF12-H

NanoCon®Neutricon®MiniCon®

Electrical

Number of contacts: user selectable 1-3 1-8 1-12

Rated current/contact: 2A solder – 7.5 A 3A

crimp – 5 A

Rated Voltage: 75 V ac 125 V ac 125 V ac

Contact resistance: <8 mΩ<2 mΩ<6 mΩ

Insulation resistance after damp heat test: >2GΩ>0.5GΩ>0.5GΩ

Dielectric strength: 1.5 Kv dc / 1.06 kV rms 1,500 v dc 1.01 Kv dc / 0.71 Kv rms

Mechanical

Maximum wire size:

• Solder: 0.20 mm2/ AWG 24 (solid wire) 1.0 mm2/ 18 AWG 0.50 mm2/ 20 AWG

• Crimp: 0.14 mm2/ AWG 26 (stranded wire) 0.14 – 0.34 mm2/ 22 – 26 AWG 0.22 mm2/ 24 AWG

Cable Anchoring: NEUTRIK®chuck principle X X X

Cable OD range: 3.4 mm max 3 – 7 mm gray chuck: 2 – 5 mm

SR8A: 3 – 3.8 mm white chuck: 5 – 7 mm

SR8B: 6 – 7 mm crimp contact: 2.5 – 6 mm

Cable retention force: <100N for 3 mm Cable <150N for 5 mm Cable <150N for 5 mm Cable

Retention method: self-locking X X X

Protective system (mated): IP50 X X (higher classes on request) X

Life time: >1000 cycles X X X

Male contact diameter: 0.5 mm 1 mm 0.8 mm

Environmental

Temperature range: -30°C to +80°C X X X

Solderability: complies with IEC 68-2-20 X X X

Insert flammability: UL 94HB UL 94V-0 X UL 94V-0

Materials

Housings cable & receptacle

CuSn4Pb4Zn4 (cable connector) X ZnAl4Cu1, gal Cu/Ni (+ black chrome) CuZn35Pb3 / ZnAl4Cu1satin chromium plated

CuZn39Pb2 (receptacle) X ZnAl4Cu1, gal Cu/Ni (+ black chrome) satin chromium plated

Insert: PETP PBTB 15% GR PA 6.6

Chuck: POM X X X

Bushing: BRASS POM + PUR BRASS

Contacts: CuZn35Pb2 CuZn39Pb3 / CuZn35Pb2, CuZn39Pb3 / CuZn35Pb2 / CuSn6

Contact surface: 0.5 µm Au 0.3 µm hard gold over Ni 0.2 µm AuCo plated

2726

732-901-9488 www.neutrikusa.com

Crimp Set:

Crimp ferrule for coaxial shield termination:

MSRC

MMI

Solder or Crimp MIL

MSC

MFI

MPC

MPS

MBC

MBS

Contacts Inserts Housing

You will not find a higher quality RCA plug. The Neutrik®

Profi®professional phono plugs are precisely machined to

our highest standards.

Featuring a retractable sleeve, the Profi®connectors makes

ground before signal contact and breaks signal before

ground. This “makes first, breaks last” feature means you

can eliminate unwanted noise and broken speaker cones

when used under load.

In addition, Profi®offers the Neutrik®unique chuck type

strain relief (includes two sizes for different diameter cables)

and gold plated contacts as standard. They arrive in pairs

marked red and black for right and left channel.

ORDERING INFORMATION – Profi®

Description Part #

Packaged in pairs – each marked red & black NF2CB//2

for right & left channels. Includes 2 strain reliefs

for different diameter cables.

Custom orders and packaging may be available.

Please contact Neutrik USA, Inc.®for details.

Profi®

Profi®Specifications

Electrical

Rated current: 16 A

Rated voltage: 250 V ac

Insulation resistance: >100GΩ

Capacitance (pin to shell): 7 pF

Dielectric strength: 1500 V dc

Mechanical

Max. wire size: 2.5 mm2/ 14 AWG

Cable anchoring: NEUTRIK®chuck principle

Cable OD range:

• blue chuck: 3.0 – 5.5 mm

• black chuck: 5.5 – 7.3 mm

Environmental

Temperature range: -30°C to +80°C

Solderability: complies with IEC 68-2-20

Materials

Shell: Brass CuZn39Pb3 black coated

Insulator: PBTP

Chuck: Polyacetal POM

Contact pin: Brass CuZn39Pb3 / 0.5 µm Au plated

Ground contact: Brass CuZn39Pb3 / 0.5 µm Au plated over 5 µm Ni

Profi®Patch Cables

2928

732-901-9488 www.neutrikusa.com

Neutrik®utilizes the highest quality craftsmanship and

materials to bring you our line of professional TT and TB

patch cables.

Our TT patch cords are made with a flexible yet durable

cable that is manufactured using our own nickel plated TT

plugs (gold plugs are also available). Neutrik®was the first

worldwide to provide nickel plating as standard to help

eliminate problems of corrosion and tarnish build-up. Each

TT plug has a hex crimped strain relief to provide the

ultimate in stress protection for the solder joints and actual

Patch Cord Assemblies

cable. Our TT patch cords are offered in five colors (red,

black, blue, yellow, and green) that are matching between

cord and plug sleeve for easy identification.

The NEUTRIK®professional TB (1/4" long frame) patch cables

feature the same craftsmanship and attention to details as

our TT cords. Standard features include an all metal black or

red body with color matched cable, unique NEUTRIK®chuck

type strain relief, and nickel plated contacts. Using a flexible

long lasting cable you are assured of NEUTRIK®quality with

each use.

NOTE: *Custom lengths available upon request. Minimum quantity of 20 per length & color. Contact Neutrik USA, Inc.®for details.

ORDERING INFORMATION – TT Patch Cords

Bantam style (0.173")

Part # Length*

NKTT03-# 1’

NKTT04-# 18"

NKTT05-# 2’

NKTT1-# 3’

NKTT12-# 4’

NKTT2-# 6’

# Available in BLK=Black, GN=Green, R=Red, Y=Yellow, BL=Blue

ORDERING INFORMATION – TB Patch Cords

(1/4") TB-style (B Gauge BPO 316)

1/4" Long Frame Length*

NKTB03-# 1’

NKTB04-# 18"

NKTB05-# 2’

NKTB1-# 3’

# Available in BLK=Black or R=Red

TECHNICAL DATA – Patch Cord Assemblies

Plug Stranding Insulation Jacket Nominal O.D. Capacitance Capacitance Shield

Size (awg 24) Thickness Thickness Cond. To Cond. Shield to Cond.

inch mm inch mm inch mm inch mm pF/ft. pF/m pF/ft pF/m inch mm

TT 60 x 0.0028 60x0.07 0.008 0.2 0.028 0.7 0.18 4.6 + 0.2 40pF/ft 120pF/m 66pF/ft 200pF/m 60 x 0.001 60 x 0.12

TB 28 x 0.039 28x0.17 0.01 0.25 0.063 1.6 0.25 6.5 + 0.2 53pF/ft 160pF/m 93pF/ft 280pF/m 85 x 0.039 85 x 0.1

All panels are provided with high quality, long life NEUTRIK®

NJ3TTA gold plated double contact point TRS jacks (2x48).

The NEUTRIK®Easy-Patch system is easily programmable for

any one of five signal routing configurations (unit ships in

the half-normalled – bottom row configuration) and for the

grounding system of your choice. Each individual jack can

be changed or reconfigured quickly even while the unit is

“on air.” The Easy-Patch offers two contact points per

(TRS) terminal with a uniquely designed mechanism for the

normalling contact. To change or repair a jack, simply

remove the front panel to reveal the module, replace or

reconfigure the jack(s) and replace the panel. It’s that easy!

The Easy-Patch is a compact, low cost patching system -

1U high and only 7” deep – for 19” rack mounting and can

NPPA-TT Series

handle analog or digital signals. The patch panel is housed

in a robust black-coated steel/aluminium shell, features pre-

cision aluminum hardware, and includes two built in cable

bars and two wide channel ID strips.

Configurations

The standard version of our ”Easy-Patch” is delivered with the

bottom row half normalled for each jack pair. There are four

other normalling configurations available for each jack pair:

● Full Normalled ● Half Normalled Top Row

● Isolated ● Parallel

CAUTION: DO NOT use parallel configurations or other paral-

lel paths in the half-normalled configuration when handling

DIGITAL signals. Parallel paths may lead to mismatching.

Please see the configuration chart included with each unit.

Configurations

Chart

Jumper

Configuration

GROUNDING OPTIONS

The flexible grounding system provides the following alternatives:

●Individual: Each channel is individually grounded through its cable shield.

●Group: Selected channel grounds are connected via the bus PCB using solder bridges

and track cuts to form a group that is connected to one common cable shield.

●Central: All channel grounds (individual top and bottom row) are connected via

the bus PCB using solder bridges and wired with only one cable shield.

●Chassis-Common: The same as central grounding but with the addition of the

common ground (top and/or bottom rows) connected to the patch panel chassis

by means of jumpers.

WIRING TERMINATIONS

Our Easy-Patch system offers different different wiring interconnects at the rear of

the unit:

●Spring loaded push terminals with gas tight connection*

●56 pin Elco/Edac connectors

●Solder lugs

*The spring loaded terminal blocks allow quick and easy wiring. NO soldering and

screwing necessary and NO special tools are required. Simply insert the STRIPPED

wire after depressing the release tab. These push terminal blocks can handle

stranded wire up to AWG 20 (0.5 mm2) and solid wire up to AWG 18 (0.75 mm2).

Half Normalled Bottom Half Normalled Top Full Normalled Parallel Isolated

ORDERING INFORMATION – NPPA-TT Series

Type No.

NPPA-TT-PT-PH Patch panel, 2x48 jacks, half normalled, 288 push terminals for easy wiring.

NPPA-TT-E56 Patch panel, 2x48 jacks, half normalled, 6x56 pole ELCO male connectors.

NPPA-TT-S Patch panel, 2x48 jacks, half normalled, 288 solder terminals for fixed installations.

ORDERING INFORMATION – Pre-Configured Jack-Pairs

NJ3TTA-4-HNB Blocks of 2 channels; half normalled bottom row; cover ident color: clear

NJ3TTA-4-HNT Blocks of 2 channels; half normalled top row; cover ident color: yellow

NJ3TTA-4-FN Blocks of 2 channels; full normalled bottom row; cover ident color: green

NJ3TTA-4-P Blocks of 2 channels; parallel; cover ident color: red

NJ3TTA-4-I Blocks of 2 channels; isolated; cover ident color: orange

TECHNICAL DATA:

Electrical

Frequency range: DC to >50 MHz

Channel separation: >100 dB @ 10 kHz, 600Ωterminated >40 dB @ 6 MHz, 110Ωterminated

Insulation resistance: >1GΩ@ 500 V dc

Connector contact resistance: 20 mΩ

Switch contact resistance: <25 mΩ

Dielectric strength: 1000 V dc

Mechanical

Lifetime: >5.000 Insertion/withdrawal cycles

Depth: 178 mm (7")

Insertion/withdrawal force: <10N / >8N

Dimensions (rack mount): 482 mm (W) x 44 mm (H) (19" x 1U)

Temperature range: -30°C to +80°C

Materials

Jack housing: PA 66 blend

Jack contacts: CuSn6 - TRIBOR®plated (0.2 µm AuCo over 2 µm NIP)

Housing: Steel and aluminum, black coated

Front panel: AIMgSI0.5 F22

Solder lugs (S)

Spring loaded push terminals (PH)

56+ pin Elco/Edac (E56)

normalling

configuration bars

ring switch

(contact point)

tip contact (2x)

ring contact (2x)

sleeve contact (2x)

specially designed

normalling mechanism

(contact point; flexible arm)

top row

bottom row

NJ3TTA Series Jack

3130

732-901-9488 www.neutrikusa.com

EasyPatch Patch Panels EasyPatch Patch Panels

The “Easy Patch” is a durable compactly designed 19" rack

mount (19" x 1U) series of patch panels. Each unit is made in

a galvanized metal housing and includes a built in cable

tray. The front panel has a removable center marking strip

and individual snap on tabs for color coding.

This system is programmable with jumpers in any of 6 different

configurations and offers 4 flexible grounding possibilities to

fit your needs. Fast rear connections are either solderless

spring loaded gold terminal blocks or Elco/Edacs (both for

fully normalled versions). A half-normalled solder lug version

is also available.

NPP-TB Series

center marking strip

14"-18" adjustable length

built in cable bar Optional color coded snap on tabs

Spring loaded solderless push termination

Jumper tabs for easy programming

The “Easy Patch” is both analog and digital capable. The

standard unit is 7" in depth and the expandable units

measures from 14" - 18" to fit various rack spaces.

In addition to color coded labeling tabs in the ten resistor

colors, accessories include a dust cover and a rear extension

bar for strain relief for the 7" versions (the extendible

versions come with a cover and the rear extension bar).

All these features lead to a TB patch panel that is cost

effective, labor saving, easy to program and durable for

your application.

GROUNDING: The flexible grounding possibilities are:

Individual: Each channel ground is a separate connection with its corresponding

cable shield.

Group: To group channels together you must link the shields of the common

ground bar by the solder joints and then you must cut the tracks

at the point where you want to form the group. The ground bar must

be connected to one common cable shield.

Common: Connects all shields to the common ground bar. The ground

bar must be connected to one common cable shield.

Chassis- Chassis ground is connected to the common ground. This is the

Common: same as for common grounding but with an additional connection

to the common ground of the patch panel chassis using a jumper.

WIRING: The “Easy Patch” offers four wiring choices.

STANDARD: Spring loaded push terminals with a gas tight connection

The spring loaded terminal blocks make it fast and easy to connect,

change, or replace a wire. NO soldering or screws necessary. Simply

depress the white key and insert the stripped wire into the space to

make a gas tight connection. Stranded wire up to AWG 20 (0.5 mm2)

and solid wire to AWG 18 (0.75 mm2) is possible.

OPTIONS: 90 pin Elco/Edac connectors (-14" versions only) – female terminations*

Solder lug -HN <half-normalled> versions only

*Pin outs available upon request

3332

732-901-9488 www.neutrikusa.com

ORDERING INFORMATION – NPP-TB Series

2 x 24 NJ6TB-V Jacks, Mates w/ 1/4" BP0316 & MIL-P-642/2 plugs

Type No. Wiring Configuration

NPP-TB Spring loaded Push terminations Programmable for all commonly used configurations

NPP-TB-HN Solder contacts Half Normalled Bottom Row only

NPP-TB-14PT Spring loaded Push terminations Programmable for all commonly used configurations

NPP-TB-14E Elco/Edac 90 pin female Programmable for all commonly used configurations

ORDERING INFORMATION – Accessories

NPP-LB Channel ID snap on tabs. Available in ten resistor colors. Sold individually, or in multi-color packages.

NPP-C Metal dust cover for 7" standard versions (extendible versions come with cover).

NPP-S Rear extension bar to act as strain relief for large cables (standard with extendible versions).

NKTB patch cables TB patch cables available in red or black in lengths of 1', 18", 2', or 3'. See Patch Cable section for details (page 29).

TECHNICAL DATA:

Electrical

Connector contact resistance: <10 mΩ

Switch contact resistance: <15 mΩ

Insulation resistance: >1GΩ@ 500 V dc

Dielectric strength: 1000 V dc

Cross talk between stereo pairs: >120 dB @ 1 kHz: 600Ωterminated

Cross talk between two adjacent channels: >120 dB @ 1 kHz

Mechanical

Insertion / withdrawal: • Force: 10N / 8N • Lifetime: >5000 insertion / withdrawal cycles

Dimensions: 485 (W) x 44 (H) mm (19" x 1U), rack mount

Depth: • 139.7 mm (5.5") for Standard • 355.6 mm (14") for "-14" version • 457.2 mm (18")

Environmental

Temperature range: -30°C to +80°C

Material

Housing, Cable bar, Dust cover: Steel, AlZn galvanized

Front Panel: Pocan B 3225

Coding tabs: Grilon PVZ-15H

90 pin Elco/Edac Spring loaded push terminals (PH) -HN solder lug

Wiring Variants

Configuration Chart

Switching: Programmable for all commonly used configurations.

Full Parallel Isolated Half Normalled Half Normalled Double

Normalled Bottom Row Top Row Normalled

EasyPatch Patch Panels EasyPatch Patch Panels

Adapters

Neutrik®offers strong, flexible, noiseless goosenecks in three

lengths to fit a variety of applications. Our goosenecks are

available individually or in sets which include a locking

female XLR for theft proof mic connections and a series

of threaded adapters. The interior of the gooseneck is a

stainless steel spiral. The exterior features a non-reflective

black finish.

ORDERING INFORMATION – Gooseneck

Made of: CuZn39Pb2; stainless steel spiral interior;

non-reflective black matte finish

Type Part No. Connection Type Comments

Gooseneck GN18 M17x1 inside thread 230 mm/9.055” length

at both ends

GN36 M17x1 inside thread 360 mm/14.173” length

at both ends

GN50 M17x1 inside thread 500 mm/19.685” length

at both ends

Gooseneck GNS18 M17x1 inside thread Sets include in addition to GN 18,

set at both ends 36 or 50

GNS36 M17x1 inside thread • black NC3FX-spec. XLR female

at both ends with securing ring and fixing

screw to prevent theft and noise.

GNS50 M17x1 inside thread • black adapter M17x1 outer to

at both ends 5/8" 27 UNS inner thread with

through hole and cable outlet.

• thread adapter M17x1 outer –

3/8" outer thread

Adapters with GNS sets are • thread adapter 3/8" inner – 5/8"

NOTsold separately 27 UNS outer thread

(see Pt# NAM5)

Flange GF1 Panel-mounting kit: Flange

Ø 63,50 mm including mounting

screw M17x1, 13 mm length

Mounting MSG M17x1 13 mm length

screw

Goosenecks

Our complete line of modules allows the user to design their

own adapters to suit a variety of specific needs. Based on

the Neutrik®“X” series connector system, these modules

offer professional and reliable connections. These modules

will accept the Neutrik®NTE series of transformers.

ORDERING INFORMATION – Modules

Type Part No. Connection Type Comments

Top Bottom

all metal distance

Coupler VMX M17x1 outside M17x1 outside sleeve keeps XLR

insert in place

Housing NM3FXI XLR female M17x1 outside

Housing NM3MXI XLR male M17x1 outside

Housing NM2P Mono 1/4" plug M17x1 inside

Housing NM3P Stereo 1/4" plug M17x1 inside

Housing NM3J Stereo 1/4" M17x1 inside

locking jack

Switch SM2/2 M17x1 outside M17x1 outside 2x2 switch

module positions

Housing KM M17x1 inside M17x1 inside long version

Housing KMX M17x1 inside M17x1 inside short version

Modules

Riveted offset mounting in stainless steel plates to allow for

printing or etching, NEUTRIK USA, Inc.®offers our 3 pin male

and/or female D-L-1 series receptacles, 1/4" locking jacks,

or NL*MP Speakon®receptacles as standard wallplates.

Mounting in a standard single electrical box outlet, screws

are included and the dual configurations can be used either

vertically or horizontally.

ORDERING INFORMATION – Wallplates

Type Description Part #

Single NL2MP Speakon®receptacle 102L

Single NC3FD-L-1- receptacle* 103F

Single NC3MD-L-1 receptacle* 103M

Single NJ3FP6C to 1/4” locking jack 103P

Single NL4MP Speakon®receptacle 104L

Dual NL2MP Speakon®receptacles 202L

Dual NC3FD-L-1- receptacles* 203F

Dual NC3FD-L-1 and NC3MD-L-1 receptacle* 203FM

Dual NC3MD-L-1 receptacles* 203M

Dual NJ3FP6C to 1/4” locking jack 203P

Dual NL4MP Speakon®receptacle 204L

*Special order of 4-7 pin receptacles available. Minimums required.

Contact Neutrik USA, Inc.®for details."

Wallplates

3534

732-901-9488 www.neutrikusa.com

Accessories Accessories

Neutrik®offers a variety of adapters that will reliably

interface with various connector combinations. These

adapters are available in either wired or non-wired versions

depending on your needs. Made with the same rugged

diecast shells of our “X” series connectors, these adapters

offer the professional look, compact design and durability

that you’ve come to expect from Neutrik®.

ORDERING INFORMATION – Adapter

Type Part No. Connection Type

Part 1 Part 2

Gender NA3FF XLR 3 pin female XLR 3 pin female

Conversion NA5FF XLR 5 pin female XLR 5 pin female

NA5FM XLR 5 pin female XLR 5 pin male

NA3MM XLR 3 pin male XLR 3 pin male

Part #s as shown NA5MM XLR 5 pin male XLR 5 pin male

are UNWIRED. NA3M5F XLR 3 pin male XLR 5 pin female

For wired NA3F5M XLR 3 pin female XLR 5 pin male

adapters add NA3FM XLR 3 pin female XLR 3 pin male

"/W" to part # - NA3F5F XLR 3 pin female XLR 5 pin female

i.e. NA3FF/W. NA3M5M XLR 3 pin male XLR 5 pin male

Extension NA3FJ XLR 3 pin female stereo 1/4" locking jack

NA3MJ XLR 3 pin male stereo 1/4" locking jack

NA2FP* XLR 3 pin female mono 1/4" plug

NA2MP* XLR 3 pin male mono 1/4" plug

NA3FP XLR 3 pin female stereo 1/4" plug

NA3MP XLR 3 pin male stereo 1/4" plug

Part #s as shown NA2FBNC* XLR 3 pin female BNC socket

are UNWIRED. NA2MBNC* XLR 3 pin male BNC socket

For wired NA2FPMF* XLR 3 pin female phono (RCA-) jack

adapters add NA2MPMF* XLR 3 pin male phono (RCA-) jack

"/W" to part # - NA2FPMM* XLR 3 pin female phono (RCA-) plug

i.e. NA3FJ/W. NA2MPMM* XLR 3 pin male phono (RCA-) plug

Threaded Adapters NAM1 M17x1 outside thread outside thread 5/8" 27 UNS

NAM4 M17x1 outside thread inside thread 5/8" 27 UNS

NAM5 3/8" inside thread outside thread 5/8" 27 UNS

*For adapters wired according to IEC268-12 (pin 2 is signal, pins 1 & 3 wired

to ground) add "/W" to part # - i.e. NA2FP/W

Other pinouts and special wiring options may be available as special order.

Minimums may be required. Contact Neutrik USA, Inc.®for details.

In addition to the original NADITBNC adapters, two new

versions of this series are now available. The BNC to XLR

3-pin receptacle (male and female) and the BNC to XLR cable

end (male and female). This series was developed to provide

an excellent impedance transformer at a reasonable cost for

meeting the needs between analog and digital applications.

Their use also allows for longer cable runs via unbalanced

coaxial lines rather than twisted pair cables that present

high attentuation values at the relevant frequencies.

The criteria for these adapters are:

● Impedance matching between 110 Ohms and 75 Ohms.

● Transition of balanced/unbalanced circuit (balun).

● Electrical isolation (optional, not necessary).

● Attentuation for use of analog video distribution

equipment (optional). Reduction of hum and noise.

AES/EBU Digital Audio Adapters

Schematics

NADITBNC-F

XLR-F

BNC

NADITBNC-M

XLR-M

BNC

ORDERING INFORMATION – AES/EBU digital Audio Adapter

Part # Description

NADITBNC-F Female XLR Receptacle (3 pin) 110 Ohm Input to

BNC Receptacle 75 Ohm Output.

NADITBNC-M BNC Receptacle 75 Ohm Input to

Male XLR Receptacle (3 pin)110 Ohm Output.

NADITBNC-FX Female XLR cable end 3-pin 110 Ohm Input to

BNC Receptacle 75 Ohm Output.

NADITBNC-MX BNC Receptacle 75 Ohm Input to

Male XLR cable end 3-pin 110 Ohm Output.

SPECIFICATIONS

Frequency Band: 0.1 MHz to 15 MHz

VSWR/Return Loss: <1.30 / >17.7 dB up to 10 MHz

Insertion Loss: <0.3dB @ 0.1 to 10 MHz

Maximum Voltage/Max. Power: 5 Vp-p / 250 mW

3736

Neutrik®is pleased to offer a series of professional audio

transformers for use in a variety of audio, studio, or line

input applications. Featuring very low distortion and

excellent frequency response these transformers are also

available in our NP2C plug to convert mic levels to guitar

inputs.

Transformers

Transformer Specifications

Part # Ripple Max. input voltage (@60Hz) Min. load

20Hz-20kHz THD ≤1% THD ≤3% impedance

NTE1 max. –1dB 1.2 V 1.4 V 200Ω

NTE4 max. –1dB 1.6 V 2.2 V 1 kΩ

NTE10/3 max. –2dB 1.2 V 1.6 V 10 kΩ

Turns Ratio Winding resistance (DC) Primary inductance

Primary Secondary @ 30Hz

NTL1 1 : 1 ± 5% 1.1 kΩ±5% 1.35 kΩ±5% ≥150 H

NTM1 1 : 1 ± 10% 85Ω±3% 105Ω±5% ≥8 H

NTM4 1 : 4 ± 10% 105Ω±3% 1.25 kΩ±5% ≥8 H

ORDERING INFORMATION – Transformers

Type Part No. Connection Type Comments

Application Source/load Turns Ratio Max, input voltage

Impedances in Ω(prim : sec) 1% THD @60Hz:

Audio input NTE1 200 / 200 1 : 1 1.2 V free wires

Audio input NTE4 1k / 10K 1 : 4 400 mV rms free wires

Audio input NTE10/3 10k / 50K 1 : 3 : 10 500 mV rms free wires

1/4" phone plug NP2C-T10AA(-BAG) 200 / 50K 1 : 10 120 mV rms with built-in transformer to convert

microphone levels to guitar inputs

1% THD @30Hz:

Studio line NTL1 600 / 600 1 : 1 6 V rms PCB mounting, fully Mu-metal shielded

Studio mic input NTM1 200 / 200 1 : 1 1.5 V rms PCB mounting, fully Mu-metal shielded

Studio mic input NTM4 200 / 10K 1 : 4 1.2 V rms PCB mounting, fully Mu-metal shielded

732-901-9488 www.neutrikusa.com

Accessories Accessories

ORDERING INFORMATION – Color coded Accessories

Part #’s Description -WT -GR -V -BL -GN -Y -O -R -BR -BLK

(White) (Gray) (Violet) (Blue) (Green) (Yellow) (Orange) (Red) (Brown) (Black)

ACRF-Color Colored rings for "A/B" series female receptacles

ACRM-Color Colored rings for "A/B" series male receptacles

BSP-Color Colored boots for all NP*C 1/4" plugs

and Neutricon®

BSTP-Color Colored sleeves for NP3TT-P Bantam

size plugs

BSX-Color Colored boots for X series

cable connectors

BSZ-Color Colored boots for Easycon series

DBA Blank plate for all "D" Series sized cutouts

DSS-Color Colored labeling plates for all D Series

size receptacles

PCR-Color Colored ring with flat label surface

for NP*C series 1/4" plugs

SCDF Rubber covers – for female receptacles SCDM Rubber covers – for male receptacles

of "D", "D-L-1", and "DM3" Series of "D", "D-L-1", "DM3", and NL*MP

XCR-Color Colored ring with flat label surface for

X series cable connectors

XLR & Color Coded Accessories

Modules Adapters

Electrical

Contact resistance:

• XLR: <3 mΩXX

• Jack: <6 mΩXX

Insulation resistance: >2GΩXX

Dielectric strength: 1.5 kV dc X X

Mechanical

Max. wire size:

XLR: 2.5 mm2/ 14 AWG X X

Jack: 1.5 mm2/ 16 AWG X X

Environmental

Temperature range: -20˚C to +65˚C X X

Solderability: complies with IEC 68-2-20 X X

Materials

Shell: ZnAl4Cu1, galv. Cu/Ni X X

Insert / Insulation: PA 6.6 30% GR X X

Contacts:

• female / jack: CuSn6, gal 2µm Ag X X

• male / plug: CuZn39Pb3, galv 2µm Ag X X

Accessories Specifications

3938

732-901-9488 www.neutrikusa.com

Neutrik®offers color coded accessories for easy identification

and match up for a variety of our connectors. Available in

the ten resistor colors these accessories can be used on our

standard 1/4" plugs or Neutricon®connectors (BSP); our

“X” series cable connectors (BSX and XCR); our “D” series,

1/4" locking jack and NL*MP connectors (DSS); or our TT size

single plugs (BSTP). The PCR and XCR rings can be added to

cables which are already soldered. Mix and match - you’ll

never make the wrong connection again when using our

color coding system.

NTE1, 4, 10/3 NTL1, NTM1, 4 NTL1: typical application

Transformers

Neutrik Part Number Guide & Contact Arrangements Neutrik Part Number Guide

NEUTRIK Type # of Sex Series Terminations Feature Shell/Contacts Latch

Contacts

NC 3FD-L -1-BAG - 0

A = Adapter 2 – 10 F = Female A H = Right angle PCB mount Revisions: No suffix = Ni/Silver Latchless

AC = "AC" M = Male B L = Solder "I" or "1" -B = Black/Gold (retention spring

C = Connector CJ V = Vertical PCB mount OR -BAG = Black/Silver instead

F = Fi (ProFi) D Grounding: of “PUSH”

J = Jack K "-1" or "-2" tab. 3 pin female

K = "Kabel" P A/B Series only receptacle only.

(Patch Cable) RC “P” series not

L = Loudspeaker TB included)

M = Module TT

P = Plug X

PP = Patch Panel ZL

T = Transformers

Part Number Guide Basic Neutrik Part Nos.

3 pin

Female Black housing/Silver contacts

Solder cups

D Series

Revision 1Connector

NEUTRIK

NC3FD-L-1-BAG

Stereo Switching Horizontal PCB Mount

Female receptacle

Revision 1

LatchlessConnector/Jack (combo)

NEUTRIK

NCJ9FI-H-O

4140

732-901-9488 www.neutrikusa.com

264

274

MALE FEMALE

34566S* 7

All standard inserts are black *Switchcraft®equivalent

This insert is colored gray.

Contact Arrangements Mating Side

4342

732-901-9488 www.neutrikusa.com

102L 35

103F 35

103M 35

103P 35

104L 35

202L 35

203F 35

203FM 35

203M 35

203P 35

204L 35

3FD-H-I 11

3FD-H-I-B 11

3FD-H-I-0 11

3FD-L-I 11

3FD-L-I-B 11

3FD-L-I-O 11

3FD-V-I 11

3FD-V-I-B 11

3FD-V-I-O 11

3MD-H-I 11

3MD-H-I-B 11

3MD-L-I 11

3MD-L-I-B 11

3MD-V-I 11

3MD-V-I-B 11

ACRF-@ 39

ACRM-@ 39

BB1 25

BC1 25

BP1 25

BS1 25

BSL-WR 20

BSP-@ 39

BSTP-@ 39

BSX-@ 39

BSZ@ 39

DBA 39

DH-NF 11

DH-NF-BAG 11

DH-NF-BAG-M3 11

DH-NF-BAG-O 11

DH-NF-M3 11

DH-NF-M3-O 11

DH-NF-O 11

DH-NM 11

DH-NM-BAG 11

DH-NM-BAG-M3 11

DH-NM-M3 11

DHP 11

DSS-@ 39

FI-8 25

GF1 34

GN-18 34

GNS-18 34

GN-36 34

GNS-36 34

GN-50 34

GNS-50 34

KM 35

KMX 35

MBC 26

MBS 26

MC-8 25

MC-8Ni 25

MI-8 25

MIF 26

MIM 26

MPC 26

MPF12-H 26

MPF12-V 26

MPM12-H 26

MPM12-V 26

MPS 26

MRF 26

MRM 26

MSC 26

MSG 34

MSRC 26

NA2FBNC 34

NA2FBNC/W 34

NA2FP 34

NA2FP/W 34

NA2FPMF 34

NA2FPMF/W 34

NA2FPMM 34

NA2FPMM/W 34

NA2MBNC 34

NA2MBNC/W 34

NA2MP 34

NA2MP/W 34

NA2MPMF 34

NA2MPMF/W 34

NA2MPMM 34

NA2MPMM/W 34

NA3FF 34

NA3FF/W 34

NA3FJ 34

NA3FJ/W 34

NA3FM 34

NA3FM/W 34

NA3FP 34

NA3FP/W 34

NA3F5F 34

NA3F5F/W 34

NA3F5M 34

NA3F5M/W 34

NA3M5F 34

NA3M5F/W 34

NA3M5M 34

NA3M5M/W 34

NA3MJ 34

NA3MJ/W 34

NA3MM 34

NA3MM/W 34

NA3MP 34

NA3MP/W 34

NA4LJ 20

NA5FF 34

NA5FF/W 34

NA5FM 34

NA5FM/W 34

NA5MM 34

NA5MM/W 34

NAC3FCA 23

NAC3FCB 23

NAC3MPA 23

NAC3MPB 23

NAC3MM 23

NADITBNC-F 36

NADITBNC-FX 36

NADITBNC-M 36

NADITBNC-MX 36

NAM1 34

NAM4 34

NAM5 34

NBS 24

NC3FAH 8

NC3FAH-1 8

NC3FAH-1-O 8

NC3FAH-2 8

NC3FAH-2-O 8

NC3FAH-O 8

NC3FAHL-1 8

NC3FAHL-1-O 8

NC3FAHL-2 8

NC3FAHL-2-O 8

NC3FAHR-1 8

NC3FAHR-1-O 8

NC3FAHR-2 8

NC3FAHR-2-O 8

NC3FAV 8

NC3FAV-1 8

NC3FAV-1-O 8

NC3FAV-2 8

NC3FAV-2-O 8

NC3FAV-O 8

NC3FAY 8

NC3FBH-1 8

NC3FBH-1-B 8

NC3FBH-1-O 8

NC3FBH-2 8

NC3FBH-2-B 8

NC3FBH-2-O 8

NC3FBHL-1 8

NC3FBHL-1-B 8

NC3FBHL-1-O 8

NC3FBHL-2 8

NC3FBHL-2-B 8

NC3FBHL-2-O 8

NC3FBHR-1 8

NC3FBHR-1-O 8

NC3FBHR-2 8

NC3FBHR-2-B 8

NC3FBHR-2-O 8

NC3FBV-1 8

NC3FBV-1-B 8

NC3FBV-1-O 8

NC3FBV-2 8

NC3FBV-2-B 8

NC3FBV-2-O 8

NC3FBY 8

NC3FBY-B 8

NC3FD-H 11

NC3FD-H-B 11

NC3FD-H-BAG 11

NC3FD-H-BAG-O 11

NC3FD-H-O 11

NC3FD-L 11

NC3FD-L-B 11

NC3FD-L-BAG 11

NC3FD-L-BAG-O 11

NC3FD-L-O 11

NC3FD-L-1 12

NC3FD-L-1-B 12

NC3FD-L-1-BAG 12

NC3FD-L-1-BAG-O 12

NC3FD-L-1-O 12

NC3FD-V 11

NC3FD-V-B 11

NC3FD-V-BAG 11

NC3FD-V-BAG-O 11

NC3FD-V-O 11

NC3FEZ-AU 5

NC3FEZ-B 5

NC3FEZY-AU 5

NC3FEZY-B 5

NC3FP-1 12

NC3FP-1-B 12

NC3FP-1-BAG 12

NC3FP-1-BAG-O 12

NC3FPP 13

NC3FRC 3

NC3FRC-B 3

NC3FRC-BAG 3

NC3FX-1 2

NC3FX-1-BAG 2

NC3FX-1-D 2

NC3FX-14 2

NC3FX-14-B 2

NC3FX-14-B-D 2

NC3FX14-D 2

NC3FX 2

NC3FX-B 2

NC3FX-BAG 2

NC3FX-BAG-D 2

NC3FXCC 3

NC3FX-D 2

NC3FX-HD 4

NC3FX-HD-B 4

NC3FX-S 4

NC3FX-S-B 4

NC3FX-SPEC. 4

NC3MAH 8

NC3MAHL 8

NC3MAH-O 8

NC3MAHR 8

NC3MAV 8

NC3MAV-O 8

NC3MAY 8

NC3MBH 8

NC3MBH-B 8

NC3MBHL 8

NC3MBHL-B 8

NC3MBHR 8

NC3MBHR-B 8

NC3MBV 8

NC3MBV-B 8

NC3MBY 8

NC3MBY-B 8

NC3MD-H 11

NC3MD-H-B 11

NC3MD-H-BAG 11

NC3MD-L 11

NC3MD-L-B 11

NC3MD-L-BAG 11

NC3MD-L-1 12

NC3MD-L-1-B 12

NC3MD-L-1-BAG 12

NC3MD-V 11

NC3MD-V-B 11

NC3MD-V-BAG 11

NC3MEZ-AU 5

NC3MEZ-B 5

NC3MEZY-AU 5

NC3MEZY-B 5

NC3MP 12

NC3MP-B 12

NC3MP-BAG 12

NC3MPP 13

NC3MRC 3

NC3MRC-B 3

NC3MRC-BAG 3

NC3MX-1 2

NC3MX-1-BAG 2

NC3MX-1-D 2

NC3MX-14 2

NC3MX-14-B 2

NC3MX-1-BAG-D 2

NC3MX-14-D 2

NC3MX-14-B-D 2

NC3MX 2

NC3MX-B 2

NC3MX-B-D 2

NC3MX-BAG 2

NC3MX-BAG-D 2

NC3MXCC 3

NC3MX-D 2

NC3MX-HD 4

NC3MX-HD-B 4

NC4FAH 9

NC4FAV 9

NC4FBH 9

NC4FBV 9

NC4FBV-B 9

NC4FD-L-1 12

NC4FD-L-1-B 12

NC4FD-L-1-BAG 12

NC4FDM3-H 13

NC4FDM3-H-BAG 13

NC4FP-1 12

NC4FP-1-B 12

NC4FP-1-BAG 12

NC4FRC 3

NC4FRC-B 3

NC4FRC-BAG 3

NC4FX 2

NC4FX-B 2

NC4FX-BAG 2

NC4FX-HD 4

NC4FX-HD-B 4

NC4MAH 9

NC4MAV 9

NC4MBH 9

NC4MBH-B 9

NC4MBV 9

NC4MBV-B 9

NC4MD-L-1 12

NC4MD-L-1-B 12

NC4MD-L-1-BAG 12

NC4MDM3-H 13

NC4MDM3-H-BAG 13

NC4MP 12

NC4MP-B 12

NC4MP-BAG 12

NC4MRC 3

NC4MRC-B 3

NC4MRC-BAG 3

NC4MX 2

NC4MX-B 2

NC4MX-BAG 2

NC4MX-HD 4

NC4MX-HD-B 4

NC5FAH 9

NC5FAV 9

NC5FBH 9

NC5FBH-B 9

NC5FBV 9

NC5FBV-B 9

NC5FD-L-1 12

NC5FD-L-1-B 12

NC5FD-L-1-BAG 12

NC5FDM3-H 13

NC5FDM3-H-BAG 13

NC5FDM3-V-BAG 13

NC5FP-1 12

NC5FP-1-B 12

NC5FP-1-BAG 12

NC5FPP 13

NC5FRC 3

NC5FRC-B 3

NC5FRC-BAG 3

NC5FX 2

NC5FX-B 2

NC5FX-BAG 2

NC5FX-HD 4

NC5FX-HD-B 4

NC5MAH 9

NC5MAV 9

NC5MBH 9

NC5MBH-B 9

NC5MBV 9

NC5MBV-B 9

NC5MD-L-1 12

NC5MD-L-1-B 12

NC5MD-L-1-BAG 12

NC5MDM3-H 13

NC5MDM3-H-BAG 13

NC5MDM3-V-BAG 13

NC5MP 12

NC5MP-B 12

NC5MP-BAG 12

NC5MRC 3

NC5MRC-B 3

NC5MRC-BAG 3

NC5MX 2

NC5MX-B 2

NC5MX-BAG 2

NC5MX-HD 4

NC5MX-HD-B 4

NC6FD-L-1 12

NC6FD-L-1-B 12

NC6FD-L-1-BAG 12

NC6FDS-L-1 12

NC6FDS-L-1-B 12

NC6FP-1 12

NC6FP-1-B 12

NC6FP-1-BAG 12

NC6FPS-1 12

NC6FRC 3

NC6FRC-B 3

NC6FRC-BAG 3

NC6FRCS 3

NC6FRCS-B 3

NC6FRCS-BAG 3

NC6FX 2

NC6FX-B 2

NC6FX-BAG 2

NC6FXS 2

NC6FXS-B 2

NC6FXS-BAG 2

NC6FX-HD 4

NC6FX-HD-B 4

NC6MD-L-1 12

NC6MD-L-1-B 12

NC6MD-L-1-BAG 12

NC6MDS-L-1 12

NC6MDS-L-1-B 12

NC6MP 12

NC6MP-B 12

NC6MP-BAG 12

NC6MRC 3

NC6MRC-B 3

NC6MRC-BAG 3

NC6MRCS 3

NC6MRCS-B 3

NC6MRCS-BAG 3

NC6MX 2

NC6MX-B 2

NC6MX-BAG 2

NC6MXS 2

NC6MXS-B 2

NC6MXS-BAG 2

NC6MX-HD 4

NC6MX-HD-B 4

NC7FD-L-1 12

NC7FD-L-1-B 12

NC7FD-L-1-BAG 12

NC7FP-1 12

NC7FP-1-B 12

NC7FRC 3

NC7FRC-B 3

NC7FRC-BAG 3

NC7FX 2

NC7FX-B 2

NC7FX-BAG 2

NC7FX-HD 4

NC7FX-HD-B 4

NC7MD-L-1 12

NC7MD-L-1-B 12

NC7MRC 3

NC7MRC-B 3

NC7MRC-BAG 3

NC7MX 2

NC7MX-B 2

NC7MX-BAG 2

NC7MX-HD 4

NC7MX-HD-B 4

NCJ5FI-H 19

NCJ5FI-H-O 19

NCJ5FI-S 19

NCJ5FI-S-O 19

NCJ5FI-V 19

NCJ5FI-V-O 19

NCJ6FI-H 19

NCJ6FI-H-O 19

NCJ6FI-S 19

NCJ6FI-S-O 19

NCJ6FI-V 19

NCJ6FI-V-O 19

NCJ9FI-H 19

NCJ9FI-H-O 19

NCJ9FI-S 19

NCJ9FI-S-O 19

NCJ9FI-V 19

NCJ9FI-V-O 19

NCJ10FI-H 19

NCJ10FI-H-O 19

NCJ10FI-S 19

NCJ10FI-S-O 19

NCJ10FI-V 19

NCJ10FI-V-O 19

NF2CB/2 28

NF-3 24

NJ2FD-V 15

NJ3FC6 15

NJ3FC6-BAG 15

NJ3FD-V 15

NJ3FP6C 15

NJ3FP6C-BAG 15

NJ3FP6C-P 15

NJ3TTA-4-HNB 31

NJ3TTA-4-HNT 31

NJ3TTA-4-FN 31

NJ3TTA-4-P 31

NJ3TTA-4-I 31

NJ5FD-V 15

NJ6FD-V 15

NJ6TB-V 15

NKTB03-BLK 29

NKTB03-R 29

NKTB04-BLK 29

NKTB04-R 29

NKTB05-BLK 29

NKTB05-R 29

NKTB1-BLK 29

NKTB1-R 29

NKTT03-BL 29

NKTT03-BLK 29

NKTT03-BLK-AU 29

NKTT03-GN 29

NKTT03-R 29

NKTT03-R-AU 29

NKTT03-Y 29

NKTT04-BL 29

NKTT04-BLK 29

NKTT04-BLK-AU 29

NKTT04-GN 29

NKTT04-R 29

NKTT04-R-AU 29

NKTT04-Y 29

NKTT05-BL 29

NKTT05-BLK 29

NKTT05-BLK-AU 29

NKTT05-GN 29

NKTT05-R 29

NKTT05-R-AU 29

NKTT05-Y 29

NKTT1-BL 29

NKTT1-BLK 29

NKTT1-BLK-AU 29

NKTT1-GN 29

NKTT1-R 29

NKTT1-R-AU 29

NKTT1-Y 29

NKTT2-BL 29

NKTT2-BLK 29

NKTT2-BLK-AU 29

NKTT2-GN 29

NKTT2-R 29

NKTT2-R-AU 29

NKTT2-Y 29

NKTT12-BL 29

NKTT12-BLK 29

NKTT12-BLK-AU 29

NKTT12-GN 29

NKTT12-R 29

NKTT12-R-AU 29

NKTT12-Y 29

NL-FASTON 20-21

NL2FC 21

NL2MD-H 21

NL2MD-V 21

NL2MP 21

NL4FC 21

NL4FC-B 21

NL4MD-H 21

NL4MD-H-2 21

NL4MD-V 21

NL4MD-V-1 21

NL4MD-V-2 21

NL4MMX 21

NL4MP 21

NL4MP-2 21

NL4MP-B 21

NL4MPR 21

NL4MPR-V 21

NL4MP-ST 21

NL4MP-UC 21

NL8FC 21

NL8MD-H 21

NL8MD-H-BAG 21

NL8MD-V 21

NL8MD-V-BAG 21

NL8MM 21

NL8MPR 21

NL8MPR-BAG 21

NM2P 35

NM-3 24

NM3FXI 35

NM3J 35

NM3MXI 35

NM3P 35

NMC 24

NP2C 17

NP2C-B 17

NP2C-BAG 17

NP2C-BAG-D 17

NP2CM 17

NP2CM-B 17

NP2CM-R 17

NP2CM-I 17

NP2C-T10AA 17,37

NP2C-T10AA-BAG 17,37

NP2L 17

NP2L-BAG 17

NP2RCS 17

NP3C 17

NP3C-B 17

NP3C-BAG 17

NP3C-D 17

NP3CM 17

NP3CM-B 17

NP3CM-R 17

NP3CM-I 17

NP3F-H 24

NP3F-V 24

NP3M-H 24

NP3M-V 24

NP3RCS 17

NP3TB-B 17

NP3TB-R 17

NP3TM-B 17

NP3TM-R 17

NP3TT-2 17

NP3TT-P-B 17

NP3TT-P-B-AU 17

NP3TT-P-R 17

NP3TT-R-AU 17

NPPA-TT-PT-PH 30

NPPA-TT-E56 30

NPPA-TT-S 30

NPP-C 33

NPP-LB 33

NPP-S 33

NPP-TB 32

NPP-TB-HN 32

NPP-TB-14E 32

NPP-TB-14PT 32

NPS 24

NR3F 24

NR3M 24

NSC 24

NTE1 37

NTE4 37

NTE103 37

NTL1 37

NTM1 37

NTM4 37

PC1 25

PCR@ 39

PP1 25

PS1 25

RP-8 25

RP-81 25

RP-8Ni 25

SC-8 25

SC-8Ni 25

SC-8W 25

SC-81 25

SCDF 39

SCDM 39

SCREW-2.5M 8

SCREW-2.9M 9,19,21

SD-NLP 20

SD-1 11

SM2/2 35

SR-8 25

SR-8W 25

VMX 35

XCR-@ 39

@ denotes product

available in ten resistor

colors as follows.

#Color Suffix

(0) Black - BLK

(1) Brown - BR

(2) Red - R

(3) Orange - O

(4) Yellow - Y

(5) Green - GN

(6) Blue - BL

(7) Violet - V

(8) Grey - GR

(9) White - WT

Index by part number Index by part number

Notes

732-901-9488 www.neutrikusa.com

Index by Series

“A/B” Series 8 – 10

Adapters 34, 36, & 38

Color Coded Accessories 39

Combo 19

“D” Series 11 & 14

Digital XLR 3 & 7

“D-L-1” Series 12 & 14

“DM3” Series 13 – 14

EasyCon Series 5 & 7

EasyPatch Patch Panels 30 – 33

FX-S Series 4 & 7

FX-Spec 4 & 7

Goosenecks 34

Jacks 15 – 16

MiniCon®26 – 27

Modules 35 & 38

NanoCon®24 & 27

Neutricon®25 & 27

“P” Series 12 & 14

“PP” Series 13 – 14

Patch Cables 29

Plugs 17 – 18

PowerCon®23

Profi®28

“RC” Series 3 & 6

Speakon®20 – 22

Transformers 37 – 38

Wallplates 35

“X” Series 2 & 6

“X-1” Series 2 & 6

“X-14” Series 2 & 6

“X-HD” Series 4 & 6

XLR Accessories 39

PARENT:

Neutrik AG

Im alten Riet 34

FL-9494 Schaan

Liechtenstein

011 423 237 2424

FAX 011 423 232 5393

neutrik@neutrik.com

www.neutrik.com

SUBSIDIARIES:

Neutrik UK, Ltd.

Columbia Business Park

Sherbourne Avenue

Ryde, Isle of Wight

P033 3QD, Great Britian

011 44 1983 811 441

FAX 011 44 1983 811 439

sales@neutrik.co.uk

Neutrik Vertriebs GmbH

Felix-Wankel-Strasse 1

DE-85221 Dachau

Germany

011 49 8131 2808 90

FAX 011 49 8131 2808 30

info@neutrik.de

Neutrik Ltd., Japan

Sakoh Building

Sendagaya 1-11-4

Sibuya-Ku

Tokyo 151 Japan

011 81 3 3663 4733

FAX 011 81 3 3663 4796

mail@neutrik.co.jp

Neutrik Zurich AG

Steinackerstrasse 35

CH-8902 Urdorf

Switzerland

011 41 736 5010

FAX 011 41 736 5011

neutrik@neutrik.ch