G104SN03V5 - AU Optronics Corporation

G104SN03 V5 rev.0.0

1/25

AU OPTRONICS CORPORATION

Product Specification G104SN03 V5

( V) Preliminary Specifications

( ) Final Specifications

Module 10.4 Inch Color TFT-LCD

Model Name G104SN03 V5

Customer Date

Checked &

Approved by

Note: This Specification is subject to change

without notice.

Approved by Date

Debbie Chiu

2011/04/25

Prepared by

ShengHsun Lin

2011/04/25

General Display Business Division /

AU Optronics corporation

AUO Confidential For FORTEC Internal Use Only / 2011/7/19

www.DataSheet4U.net

G104SN03 V5 rev.0.0

2/25

AU OPTRONICS CORPORATION

Product Specification G104SN03 V5

Contents

1. Operating Precautions.....................................................................................4

2. General Description.........................................................................................5

2.1 Display Characteristics...........................................................................................................5

2.2 Optical Characteristics ...........................................................................................................6

3. Functional Block Diagram ...............................................................................9

4. Absolute Maximum Ratings ..........................................................................10

4.1 Absolute Ratings of TFT LCD Module .................................................................................10

4.2 Absolute Ratings of Environment ........................................................................................10

5. Electrical Characteristics ..............................................................................11

5.1 TFT LCD Module ..................................................................................................................11

5.2 Backlight Unit........................................................................................................................13

6. Signal Characteristic .....................................................................................14

6.1 Pixel Format Image ..............................................................................................................14

6.2 Scanning Direction ...............................................................................................................14

6.3 Signal Description ................................................................................................................15

6.4 The Input Data Format .........................................................................................................16

6.5 Interface Timing ....................................................................................................................17

6.6 Power ON/OFF Sequence ...................................................................................................18

7. Connector & Pin Assignment........................................................................19

7.1 TFT LCD Module: LVDS Connector.....................................................................................19

7.2 LED Backlight Unit (CN2): Driver Connector ......................................................................19

7.3 LED Backlight Unit (CN4): Light bar Connector..................................................................20

8. Reliability Test Criteria ..................................................................................21

9. Mechanical Characteristics ...........................................................................22

9.1 LCM Outline Dimension (Front View) ..................................................................................22

9.2 LCM Outline Dimension (Rear View)...................................................................................23

10. Label and Packaging....................................................................................24

10.1 Shipping Label (on the rear side of TFT-LCD display) ......................................................24

10.2 Carton Package .................................................................................................................24

11 Safety.............................................................................................................25

11.1 Sharp Edge Requirements.................................................................................................25

11.2 Materials .............................................................................................................................25

11.3 Capacitors...........................................................................................................................25

11.4 National Test Lab Requirement..........................................................................................25

AUO Confidential For FORTEC Internal Use Only / 2011/7/19

www.DataSheet4U.net

G104SN03 V5 rev.0.0

3/25

AU OPTRONICS CORPORATION

Product Specification G104SN03 V5

Record of Revision

Version and Date Page

Old description New Description

0.0 April 25, 2011 All First draft specification -

AUO Confidential For FORTEC Internal Use Only / 2011/7/19

www.DataSheet4U.net

G104SN03 V5 rev.0.0

4/25

AU OPTRONICS CORPORATION

Product Specification G104SN03 V5

1. Operating Precautions

1) Since front polarizer is easily damaged, please be cautious and not to scratch it.

2) Be sure to turn off power supply when inserting or disconnecting from input connector.

3) Wipe off water drop immediately. Long contact with water may cause discoloration or spots.

4) When the panel surface is soiled, wipe it with absorbent cotton or soft cloth.

5) Since the panel is made of glass, it may be broken or cracked if dropped or bumped on hard surface.

6) To avoid ESD (Electro Static Discharde) damage, be sure to ground yourself before handling TFT-LCD Module.

7) Do not open nor modify the module assembly.

8) Do not press the reflector sheet at the back of the module to any direction.

9) In case if a module has to be put back into the packing container slot after it was taken out from the

container, do not press the center of the LED light bar edge. Instead, press at the far ends of the LED light

bar edge softly. Otherwise the TFT Module may be damaged.

10) At the insertion or removal of the Signal Interface Connector, be sure not to rotate nor tilt the Interface

Connector of the TFT Module.

11) TFT-LCD Module is not allowed to be twisted & bent even force is added on module in a very short time.

Please design your display product well to avoid external force applying to module by end-user directly.

12) Small amount of materials having no flammability grade is used in the LCD module. The LCD module should be

supplied by power complied with requirements of Limited Power Source (IEC60950 or UL1950), or be applied

exemption.

13) Severe temperature condition may result in different luminance, response time and lamp ignition voltage.

14) Continuous operating TFT-LCD display under low temperature environment may accelerate lamp exhaustion and

reduce luminance dramatically.

15) The data on this specification sheet is applicable when LCD module is placed in landscape position.

16) Continuous displaying fixed pattern may induce image sticking. It’s recommended to use screen saver or shuffle

content periodically if fixed pattern is displayed on the screen.

AUO Confidential For FORTEC Internal Use Only / 2011/7/19

www.DataSheet4U.net

G104SN03 V5 rev.0.0

5/25

AU OPTRONICS CORPORATION

Product Specification G104SN03 V5

2. General Description

This specification applies to the Color Active Matrix Liquid Crystal Display G104SN03 V5 composed of a TFT-LCD

display, a driver and power supply circuit, and a LED backlight system. The screen format is intended to support SVGA

(800(H) x 600(V)) screen and 16.2M (RGB 8-bits) or 262k colors (RGB 6-bits).

LED driving board for backlight unit is included in G104SN03 V5 and the LED unit is replaceable.

All input signals are LVDS interface and compatible with G104SN03 V1.

G104SN03 V5 designed with wide viewing angle; wide temperature and long life LED backlight (30k hrs) is well suited

for industial applications.

G104SN03 V5 is a RoHS product.

2.1 Display Characteristics

The following items are characteristics summary on the table under 25 oC condition:

Items Unit Specifications

Screen Diagonal [inch] 10.4

Active Area [mm] 211.2(H) x 158.4(V)

Pixels H x V 800x3(RGB) x 600

Pixel Pitch [mm] 0.264 x 0.264

Pixel Arrangement R.G.B. Vertical Stripe

Display Mode TN, Normally White

Nominal Input Voltage VDD [Volt] 3.3 (typ.)

Typical Power Consumption [Watt] 2.5W(ILED=25mA)

All black pattern

Weight [Grams] 300g(typ.)

Physical Size [mm] 236.0(H)x 176.9(V) x 5.7(D) (typ.)

Electrical Interface 1 channel LVDS

Surface Treatment Anti-glare, Hardness 3H

Support Color 16.2M / 262K colors

Temperature Range

Operating

Storage (Non-Operating)

[oC]

-20 to +70

RoHS Compliance RoHS Compliance

AUO Confidential For FORTEC Internal Use Only / 2011/7/19

www.DataSheet4U.net

G104SN03 V5 rev.0.0

6/25

AU OPTRONICS CORPORATION

Product Specification G104SN03 V5

2.2 Optical Characteristics

The optical characteristics are measured under stable conditions at 25 oC (Room Temperature):

Item Unit Conditions Min. Typ. Max. Note

White Luminance [cd/m2] ILED= 25mA

(center point) 190 230 - 1

Uniformity % 5 points 65 75 - 2,3

Contrast Ratio 400 500 - 4

[msec] Rising - 25 30

[msec] Falling - 10 20

Response Time

[msec] Rising + Falling - 35 50

5

[degree]

Horizontal (Right)

CR = 10 (Left)

60

TBD

-

Viewing Angle

[degree]

Vertical (Upper)

CR = 10 (Lower)

55

45

TBD

-

6

Red x TBD TBD TBD

Red y TBD TBD TBD

Green x TBD TBD TBD

Green y TBD TBD TBD

Blue x TBD TBD TBD

Blue y TBD TBD TBD

White x 0.28 0.31 0.34

Color / Chromaticity

Coordinates

(CIE 1931)

White y 0.30 0.33 0.36

Color Gamut % 50 -

Note 1: Measurement method

Equipment Pattern Generator, Power Supply, Digital Voltmeter, Luminance meter (SR_3 or equivalent)

Aperture

1



w

i

t

h50

cmv

i

ew

i

ng

di

s

t

ance

Test Point Center

Environment < 1 lux

LCD Module

SR_3 or

equivalent

Measuring distance

Module Driving Equipment

AUO Confidential For FORTEC Internal Use Only / 2011/7/19

www.DataSheet4U.net

G104SN03 V5 rev.0.0

7/25

AU OPTRONICS CORPORATION

Product Specification G104SN03 V5

Note 2: Definition of 5 points position (Display active area: 211.2mm (H) x 158.4mm (V))

1 2

3

4 5

H /4

H

W

W /4 W /4 W /4 W /4

Note 3: The luminance uniformity of 5 points is defined by dividing the minimum luminance values by the maximum test

point luminance

Note 4: Definition of contrast ratio (CR):

Note 5: Definition of response time:

The output signals of photo detector are measured when the input signals are changed from “White” to “Black”

(falling time) and from “Black” to “White” (rising time), respectively. The response time interval is between 10% and

90% of amplitudes. Please refer to the figure as below.

Contrast ratio (CR)=

Brightness on the “White” state

Brightness on the “Black” state

100

90

10

0

%

Optical

response

White

Black

White

Tf

Tr

90

10

0

Optical

response

White

Black

White

Tr

Minimum

Brightnes

s of

five

poin

ts

δW9

=

M

aximum

Brightness of

five

points

AUO Confidential For FORTEC Internal Use Only / 2011/7/19

www.DataSheet4U.net

G104SN03 V5 rev.0.0

8/25

AU OPTRONICS CORPORATION

Product Specification G104SN03 V5

Note 6: Definition of viewing angle

Viewing a

n

g

l

e

i

s

t

h

emeasureme

n

t

o

f

co

n

t

ras

t

ra

t

i

o

10

,

a

tt

h

escree

n

ce

n

t

er

,

overa

180°h

or

i

zo

n

t

a

l

a

n

d180°

vertical range (off-normal viewing angles). The 180° viewing angle range is broken down as below: 90° (θ) horizontal

left and right, and 90° (Φ) vertical high (up) and low (down). The measurement direction is typically perpendicular to the

display surface with the screen rotated to its center to develop the desired measurement viewing angle.

AUO Confidential For FORTEC Internal Use Only / 2011/7/19

www.DataSheet4U.net

G104SN03 V5 rev.0.0

9/25

AU OPTRONICS CORPORATION

Product Specification G104SN03 V5

3. Functional Block Diagram

The following diagram shows the functional block of the 10.4 inch color TFT/LCD module:

TFT-LCD

800x(3)x600

Pixels

Source Driver IC

Gate Driver IC

Light Bar

DC Power

Generate

Gamma

Voltage

DC/DC

converter

Pa nel

Controller

LVDS

receiver

Timing Controller

Connecter

LVDS 1ch

6/8 bits Sel

DPS

DC Power

RSDS

AUO Confidential For FORTEC Internal Use Only / 2011/7/19

www.DataSheet4U.net

G104SN03 V5 rev.0.0

10/25

AU OPTRONICS CORPORATION

Product Specification G104SN03 V5

4. Absolute Maximum Ratings

4.1 Absolute Ratings of TFT LCD Module

Item Symbol Min Max Unit

Logic/LCD drive Voltage

Vin -0.3 +4.0 [Volt]

4.2 Absolute Ratings of Environment

Item Symbol Min Max Unit

Operating Temperature

TOP -20 +70 [oC]

Operation Humidity HOP 5 90 [%RH]

Storage Temperature

TST -20 +70 [oC]

Storage Humidity HST 5 90 [%RH]

Note: Maximum Wet-Bulb should be 39 oC and no condensation.

AUO Confidential For FORTEC Internal Use Only / 2011/7/19

www.DataSheet4U.net

G104SN03 V5 rev.0.0

11/25

AU OPTRONICS CORPORATION

Product Specification G104SN03 V5

5. Electrical Characteristics

5.1 TFT LCD Module

5.1.1 Power Specification

Symbol Parameter Min Typ Max Units

Remark

VDD Logic/LCD Drive

Voltage 3.0 3.3 3.6 [Volt]

IDD VDD Current - 320 - [mA] All Black Pattern

(VDD=3.3V, at 60Hz)

Irush LCD Inrush Current - - 1.5 [A] Note 1

PDD VDD Power - 1.06 - [Watt]

All Black Pattern

(VDD=3.3V, at 60Hz)

VDDrp

Allowable Logic/LCD

Drive Ripple Voltage - - 100 [mV]

p-p

All Black Pattern

(VDD=3.3V, at 60Hz)

Note 1: Measurement condition:

Q3

AO6402

G

D2S

D1

D5

D6

Q3

AO6402

G

D2 S

D1

D5

D6

C1

1uF/16V

C2

1uF/25V

C3

0.01uF/25V

F1

VR1

47K

+12.0V

VCC

SW1

SW MAG-SPST

1 2

(High to Low)

Control

Signal

(LCD Module Input)

R2

1K

+3.3V

R1

47K

R2

1K

90%

10%

VDD rising time

0V

3.3V

0.47ms+ 10%

VDD

AUO Confidential For FORTEC Internal Use Only / 2011/7/19

www.DataSheet4U.net

G104SN03 V5 rev.0.0

12/25

AU OPTRONICS CORPORATION

Product Specification G104SN03 V5

5.1.2 Signal Electrical Characteristics

Input signals shall be low or Hi-Z state when VDD is off.

Note: LVDS Signal Waveform.

Symbol Item Min.

Typ.

Max.

Unit Remark

VTH Differential Input High Threshold - - 100 [mV]

VCM=1.2V

VTL Differential Input Low Threshold 100 - - [mV]

VCM=1.2V

｜VID｜ Input Differential Voltage 100 400 600 [mV]

VICM Differential Input Common Mode Voltage

1.125

1.25

1.375

[V] VTH/VTL=+-100mV

AUO Confidential For FORTEC Internal Use Only / 2011/7/19

www.DataSheet4U.net

G104SN03 V5 rev.0.0

13/25

AU OPTRONICS CORPORATION

Product Specification G104SN03 V5

5.2 Backlight Unit

5.2.1 Parameter guideline for LED

Following characteristics are measured under a stable condition using an inverter at 25

)

(R

o

om Temperature):

Symbol Parameter Min. Typ. Max. Unit Remark

VCC Input Voltage 10.8 12 12.6 [Volt]

IVCC Input Current - 0.12 - [A] 100% Blightness

PVCC Power Consumption - 1.44 - [Watt]

100% Blightness

FPWM Dimming Frequency 200 - 10K [Hz]

Dimming Swing Voltage 3 3.3 5.5 [Volt]

Dimming duty cycle 5 - 100 %

PWM Dimming

Dimming Dimming Voltage 0.6 3 [Volt]

Dimming Range 30 100 %

Analoge Dimming

IF LED Forward Current - 25 - [mA] Ta = 25oC

VF LED Forward Voltage - 26 29.2 [Volt] IF = 25mA, Ta = 25oC

PLED LED Power Consumption - 1.92 - [Watt]

IF = 25mA, Ta = 25oC

LED total Power

Operation Life

25,000 30,000

- Hrs

Ta= 60oC RH<60%

IF=25mA Tj<70 oC

Note 1: Ta means ambient temperature of TFT-LCD module.

Note 2: VCC, IVCC, Irush LED, PVCC are defined for LED backlight.(100% duty of PWM dimming)

Note 3: IF, VF are defined for one channel LED. There are three LED channel in back light unit.

Note 4: If G104SN03 V5 module is driven by high current or at high ambient temperature & humidity condition. The

operating life will be reduced.

Note 5: Operating life means brightness goes down to 50% initial brightness. Minimum operating life time is estimated

data.

AUO Confidential For FORTEC Internal Use Only / 2011/7/19

www.DataSheet4U.net

G104SN03 V5 rev.0.0

14/25

AU OPTRONICS CORPORATION

Product Specification G104SN03 V5

6. Signal Characteristic

6.1 Pixel Format Image

Following figure shows the relationship between input signal and LCD pixel format.

1st

Pixel

2nd

Pixel

799th

Pixel

800th

Pixel

1st

Line

R

G

B

R

G

B

R

G

B

R

G

B

600th

Lin R

G

B

R

G

B

R

G

B

R

G

B

6.2 Scanning Direction

The following figures show the image seen from the front view. The arrow indicates the direction of scan.

Fig. 1 Normal scan (Pin4, DPS = Low or NC) Fig. 2 Reverse scan (Pin4, DPS = High)

AUO Confidential For FORTEC Internal Use Only / 2011/7/19

www.DataSheet4U.net

G104SN03 V5 rev.0.0

15/25

AU OPTRONICS CORPORATION

Product Specification G104SN03 V5

6.3 Signal Description

The module uses a LVDS receiver embedded in AUO’s ASIC. LVDS is a differential signal technology for LCD

interface and a high-speed data transfer device.

(1)Input signal interface

Pin no

Symbol Function Etc.

1 VDD +3.3 V power supply

2 VDD +3.3 V power supply

3 GND Ground

4 DPS Reverse Scan Function [H: Enable; L/NC:Disable]

5 RxIN0-

6 RxIN0+

LVDS receiver signal channel 0

LVDS Differential Data Input (R0, R1, R2, R3, R4, R5, G0)

7 GND Ground

8 RxIN1-

9 RxIN1+

LVDS receiver signal channel 1

LVDS Differential Data Input (G1, G2, G3, G4, G5, B0, B1)

10 GND Ground

11 RxIN2-

12 RxIN2+

LVDS receiver signal channel 2

LVDS Differential Data Input (B2, B3, B4, B5, HS, VS, DE)

13 GND Ground

14 CKIN-

15 CKIN+

LVDS receiver signal clock

16 GND Ground

17 RxIN3-

18 RxIN3+

LVDS receiver signal channel 3, NC for 6 bit LVDS Input

LVDS Differential Data Input (R6, R7, G6, G7, B6, B7, RSV)

19 Reserved Reserved for AUO internal test. Please treat it as NC.

20 SEL68 6/8 bits LVDS input setting [H: 8 bits; L/NC:6 bits]

Note 1: Input Signals shall be in low status when VDD is off.

Note 2: High stands for “3.3V”, Low stands for “0V”, NC means “No Connection”.

Note 3: RSV means “Reserved”.

AUO Confidential For FORTEC Internal Use Only / 2011/7/19

www.DataSheet4U.net

G104SN03 V5 rev.0.0

16/25

AU OPTRONICS CORPORATION

Product Specification G104SN03 V5

6.4 The Input Data Format

SEL68 =“Low” or “NC” for 6 bits LVDS Input

SEL68 = “High” for 8 bits LVDS Input

Note1: Please follow PSWG.

Note2: R/G/B data 7:MSB, R/G/B data 0:LSB

Signal Name Description Remark

R7

R6

R5

R4

R3

R2

R1

R0

Red Data 7

Red Data 6

Red Data 5

Red Data 4

Red Data 3

Red Data 2

Red Data 1

Red Data 0

Red-pixel Data

For 8Bits LVDS input

MSB: R7 ; LSB: R0

For 6Bits LVDS input

MSB: R5 ; LSB: R0

G7

G6

G5

G4

G3

G2

G1

G0

Green Data 7

Green Data 6

Green Data 5

Green Data 4

Green Data 3

Green Data 2

Green Data 1

Green Data 0

Green-pixel Data

For 8Bits LVDS input

MSB: G7 ; LSB: G0

For 6Bits LVDS input

MSB: G5 ; LSB: G0

B7

B6

B5

B4

B3

B2

B1

B0

Blue Data 7

Blue Data 6

Blue Data 5

Blue Data 4

Blue Data 3

Blue Data 2

Blue Data 1

Blue Data 0

Blue-pixel Data

For 8Bits LVDS input

MSB: B7 ; LSB: B0

For 6Bits LVDS input

MSB: B5 ; LSB: B0

RxCLKIN LVDS Data Clock

DE Data Enable Signal When the signal is high, the pixel data

shall be valid to be displayed.

Note: Output signals from any system shall be low or Hi-Z state when VDD is off.

NS

-

like

format

AUO Confidential For FORTEC Internal Use Only / 2011/7/19

www.DataSheet4U.net

G104SN03 V5 rev.0.0

17/25

AU OPTRONICS CORPORATION

Product Specification G104SN03 V5

6.5 Interface Timing

6.5.1 Timing Characteristics

Signal Symbol Min. Typ. Max. Unit

Clock Frequency 1/ TClock 30 40 50 MHz

Period TV 608 628 1024

Active TVD -- 600 --

Vertical

Section

Blanking

TVB 8 28 424

TLine

Period TH 960 1056 1060

Active THD -- 800 --

Horizontal

Section

Blanking

THB 160 256 260

TClock

Frame Rate F 50 60 75 Hz

Note : DE mode.

6.5.2 Input Timing Diagram

DOTCLK

DE

TH

THB THD

DE

TV

TVB

TVD

Input Timing Definition ( DE Mode)

TCLOCK

Input

Data

Pixel

1

Pixel

2

Pixel

3

Pixel

N-1

Pixel

N

Invaild

Data

Invaild

Data

Pixel

1

AUO Confidential For FORTEC Internal Use Only / 2011/7/19

www.DataSheet4U.net

G104SN03 V5 rev.0.0

18/25

AU OPTRONICS CORPORATION

Product Specification G104SN03 V5

6.6 Power ON/OFF Sequence

VDD power and lamp on/off sequence is as below. Interface signals are also shown in the chart. Signals from

any system shall be Hi-Z state or low level when VDD is off.

Power ON/OFF sequence timing

Value Units

Parameter

Min. Typ. Max.

T1 0.5 - 10 [ms]

T2 30 40 50 [ms]

T3 200 -- -- [ms]

T4 0.5 -- 10 [ms]

T5 10 - - [ms]

T6 10 - - [ms]

T7 0 - - [ms]

T8 10 - - [ms]

T9 -- -- 10 [ms]

T10 110 -- -- [ms]

T11 0 16 50 [ms]

T12 - - 10 [ms]

T13 1000 - - [ms]

The above on/off sequence should be applied to avoid abnormal function in the display. Please make sure to turn

off the power when you plug the cable into the input connector or pull the cable out of the connector.

AUO Confidential For FORTEC Internal Use Only / 2011/7/19

www.DataSheet4U.net

G104SN03 V5 rev.0.0

19/25

AU OPTRONICS CORPORATION

Product Specification G104SN03 V5

7. Connector & Pin Assignment

Physical interface is described as for the connector on module. These connectors are capable of accommodating

the following signals and will be following components.

7.1 TFT LCD Module: LVDS Connector

Connector Name / Designation Signal Connector

Manufacturer STM or compatible

Connector Model Number MSB24013P20HA or compatible

Adaptable Plug P24013P20 or compatible

Pin No. Symbol Pin No. Symbol

1 VDD 2 VDD

3 GND 4 DPS

5 RxIN0- 6 RxIN0+

7 GND 8 RxIN1-

9 RxIN1+ 10 GND

11 RxIN2- 12 RxIN2+

13 GND 14 RxCKIN-

15 RxCKIN+ 16 GND

17 RxIN3- 18 RxIN3+

19 RSV 20 SEL68

7.2 LED Backlight Unit (CN2): Driver Connector

Connector Name / Designation Lamp Connector

Manufacturer Entery

Connector Model Number 3808K-F05N-02R or compatible

Mating Model Number H208K-P05N-02B or compatible

Pin No. Symbol Description

Pin1 VCC 12V input

Pin2 GND GND

Pin3 On/OFF 5V-ON,0V-OFF

Pin4 Dimming PWM/Analog

Pin5 NA

AUO Confidential For FORTEC Internal Use Only / 2011/7/19

www.DataSheet4U.net

G104SN03 V5 rev.0.0

20/25

AU OPTRONICS CORPORATION

Product Specification G104SN03 V5

7.3 LED Backlight Unit (CN4): Light bar Connector

Connector Name / Designation Lamp Connector

Manufacturer Entery or compatible

Connector Model Number Entery H203K-D04N-02Bor compatible

Mating Model Number Entery 3800K-F04N-03Ror compatible

Pin # Symbol Cable color Signal Name

1 AN RED LED anode

2 CA1 BLACK LED Cathode 1

3 CA2 WHITE LED Cathode 2

4 CA3 BLUE LED Cathode 3

AUO Confidential For FORTEC Internal Use Only / 2011/7/19

www.DataSheet4U.net

G104SN03 V5 rev.0.0

21/25

AU OPTRONICS CORPORATION

Product Specification G104SN03 V5

8. Reliability Test Criteria

Items Required Condition Note

Temperature

Humidity Bias 40 oC /90%,300Hr

High Temperature

Operation 70 oC, 300Hr (center point of panel surface)

Low Temperature

Operation -20 oC, 300Hr

Hot Storage 70 oC, 300 hours

Cold Storage -20 oC, 300 hours

Thermal Shock

Test -20 oC /30 min ,60 oC /30 min ,100cycles, 40 oC minimun ramp rate

Hot Start Test 70 oC /1 Hr min. power on/off per 5 minutes, 5 times

Cold Start Test -20 oC /1 Hr min. power on/off per 5 minutes, 5 times

Shock Test

(Non-Operating) 50G,20ms,Half-sine wave,(+-X,+-Y,+-Z)

Vibration Test

(Non-Operating)

1.5G, 10~200~10Hz, Sine wave

30mins/axis, 3 direction (X, Y, Z)

On/off test On/10 sec, Off/10 sec, 30,000 cycles

ESD Contact : ± 8KV/ operation, Class B

Air : ± 15KV / operation, Class B

Note 1

EMI 30-230 MHz, limit 40 dBu V/m, 230-1000 MHz, limit 47 dBu V/m

Note1: According to EN61000-4-2 , ESD class B: Some performance degradation allowed. No data lost

. Self-recoverable. No hardware failures.

Note2:

 Water condensation is not allowed for each test items.

 Each test is done by new TFT-LCD module. Don’t use the same TFT-LCD module repeatedly for reliability

test.

 The reliability test is performed only to examine the TFT-LCD module capability.

 To inspect TFT-LCD module after reliability test, please store it at room temperature and room humidity for 24

hours at least in advance.

AUO Confidential For FORTEC Internal Use Only / 2011/7/19

www.DataSheet4U.net

G104SN03 V5 rev.0.0

22/25

AU OPTRONICS CORPORATION

Product Specification G104SN03 V5

9. Mechanical Characteristics

9.1 LCM Outline Dimension (Front View)

AUO Confidential For FORTEC Internal Use Only / 2011/7/19

www.DataSheet4U.net

G104SN03 V5 rev.0.0

23/25

AU OPTRONICS CORPORATION

Product Specification G104SN03 V5

9.2 LCM Outline Dimension (Rear View)

AUO Confidential For FORTEC Internal Use Only / 2011/7/19

www.DataSheet4U.net

G104SN03 V5 rev.0.0

24/25

AU OPTRONICS CORPORATION

Product Specification G104SN03 V5

10. Label and Packaging

10.1 Shipping Label (on the rear side of TFT-LCD display)

10.2 Carton Package

1. Max. Capacity : 30 LCD Modules/Carton.

NOTE :

3. Meas : 448 mm*402mm*350mm.

2. Max. Weight : 13Kg/Carton.

Anti-Static

Bag

LCD Module

EPP Cushion

Carton

V5

AUO Confidential For FORTEC Internal Use Only / 2011/7/19

www.DataSheet4U.net

G104SN03 V5 rev.0.0

25/25

AU OPTRONICS CORPORATION

Product Specification G104SN03 V5

11 Safety

11.1 Sharp Edge Requirements

There will be no sharp edges or comers on the display assembly that could cause injury.

11.2 Materials

11.2.1 Toxicity

There will be no carcinogenic materials used anywhere in the display module. If toxic materials are

used, they will be reviewed and approved by the responsible AUO toxicologist.

11.2.2 Flammability

All components including electrical components that do not meet the flammability grade UL94-V1 in

the module will complete the flammability rating exception approval process.

The printed circuit board will be made from material rated 94-V1 or better. The actual UL flammability

rating will be printed on the printed circuit board.

11.3 Capacitors

If any polarized capacitors are used in the display assembly, provisions will be made to keep them from

being inserted backwards.

11.4 National Test Lab Requirement

The display module will satisfy all requirements for compliance to:

UL 60950-1 second edition U.S.A. Information Technology Equipment

AUO Confidential For FORTEC Internal Use Only / 2011/7/19

www.DataSheet4U.net