023300320 - ABB - Datasheet.Live

- 82 - All Data Subject To Change Without Notice

www.andersonpower.com

| SB®350 ORDERING INFORMATION |

SB®350 Connectors

- up to 500 Amps

SB®350 Standard Housings

The largest SB® housings work with wire contacts up to 350 mcm [150 mm²] as well as busbar contacts. Gen-

derless design mates with itself. Mechanical keys are color coded. NOTE: SB®350 Black and Blue Housings

have the same keying features and can be intermated.

Description --- Part Numbers ---

Minimum Quantity ...... 50 25 ...

Yellow 914-BK 914

Orange 932-BK 932

Red 913-BK 913

Gray 906-BK 906

Blue 912-BK 912

Green 931-BK 931

Black 2-7250G8 -

SB®350 Chemical Resistant Housings

Same features as the Standard SB®350 but molded in a

chemical resistant PBT/ PC blend. Suitable for use to -40°C.

Description --- Part Numbers ---

Minimum Quantity ...... 50 25 ....

Red P913-BK P913

Gray P906-BK P906

SB®350 Silver Plated Wire Contacts

Silver plated contacts offer superior electrical performance and durability up to 10,000 mating cycles.

See reducing bushings in accessory section for smaller wires.

Dimensions

Mating - A - - B - - C -

AWG mm² Force - Loose Piece Part Numbers - inches mm inches mm inches mm

Minimum Quantity .............. 200 150 50 .............................................................................

300mcm 152 High - 910-BK 910 * 0.75 19.05 0.87 22.10 3.04 77.2

4/0 107.2 High 908-BK - 908 * 0.64 16.26 0.75 19.05 3.03 77.0

3/0 85 High 916-BK - 916 * 0.58 14.73 0.70 17.78 3.00 76.2

2/0 67.4 High 907-BK - 907 * 0.49 12.45 0.64 16.26 2.96 75.2

1/0 53.5 High 917-BK - 917 * 0.44 11.18 0.51 12.95 2.91 73.9

* Sold as pairs. 2 parts shipped for every 1 part ordered.

[ 182.6 ]

7.19

MATERIAL ID

[ 107.9 ]

4.25

[ 28.6 ]

1.13

[ 69.9 ]

2.75

[ 6.6 ]

Ø 0.26

(2) PLC’S

[ 34.9 ]

1.38

Bottom View

Mated Length

P = Chemical Resistant

The SB®350 is the largest connector in the series with

power capabilities up to 450 amps with 4/0 AWG wire

and 500 amps with a 350 mcm wire. Wires ranging from

#1/0 (53.5 mm²) to 350 mcm (150 mm²) ﬁ t into the one

piece housing available in standard PC or a chemical

resistant PBT/PC blend. Silver plated wire or busbar

contacts minimize electrical resistance while offering

supreme durability and reliability.

• Up to 350 mcm (150 mm²) Wires

Allows UL rated currents up to 500 amps

• Chemical Resistant Housing Option

Extends temperature range down to -40°C, while offering

enhanced UV and chemical resistance

• Same Housings Used for Wire and Busbar Contacts

Enables color-coded mechanically keyed wire to busbar

connections

SECTION 3

SB® 350

[ 20.6 ]

0.81

[ C ± 2.0 ]

C ± 0.08

[ 32.8 ]

1.29 MIN

- 83 -

All Data Subject To Change Without Notice www.andersonpower.com

| SB®350 CONNECTOR SPECIFICATIONS |

Mechanical

Wire Size Range AWG mm²

Wire Contacts with Bushings 1/0 to 350 mcm 53.5 to 150

Max. Wire Insulation Diameter in. mm

1.100 27.900

Operating Temperature ² °F °C

Standard -4° to 221° -20° to 105°

Chemical Resistant -40 to 221° -40° to 105°

Mating Cycles No Load by Plating Silver (Ag)

Wire and Busbar Contacts 10,000

Avg. Mating / Unmating Force Lbf. N

2 Pole 30 133

Min. Contact / Spring Retention Force

lbf 150

N 667

Electrical

Current Rating Amperes 1 UL 1977 CSA

Wire to Wire (4/0 AWG) 450

Wire to Wire (350 mcm) 500 325

Voltage Rating AC/DC

UL 1977 600

Dielectric Withstanding Voltage

Volts AC 2,200

Avg. Mated Contact Resistance Milliohms 1

2 1/2” of 300mcm wire 0.050

Hot Plug Current Rating Amperes - Wire & Busbar

250 cycles at 120V DC 100A

Materials

Housing

Standard Plastic Resin Polycarbonate

Chem. Resistant Resin Polycarbonate / PBT blend

Contact Retention Spring Stainless Steel

Housing Flammability Rating

UL94 V-0

Glow Wire 960°C (GWFI) / 800°C (GWIT)

Wire & Busbar Contacts 4

Base Copper Alloy

Plating Silver

Contact Termination Methods

Crimp ³ Wire Contacts

Hand Solder Wire Contacts

Wrench / Socket Busbar Contacts

NOTE 1: See IEC 60664-1 for working voltage.

¹ Based on: 105°C rated or better cable of the largest size, Properly calibrated APP

recommended tooling, and a 25°C ambient temperature. UL rating not to exceed the

maximum operating temperature. CSA rating below a 30°C temperature rise.

² Limited by the thermal properties of the connector plastic housing.

³ Use APP recommended tooling only. Alternate tools may adversely affect the

performance of our connectors along with UL and CSA recognition.

4 Has not been tested by UL.

SECTION 3

SB® 350

See Busbar contact drawing on

website for further detail.

B[ 22.3 ]

0.88

[ 2.5 ]

0.10

[ 131.7 ]

5.19

[ 17.0 ]

0.67

# 3/8 - 16 THD

SB®350 Silver Plated Busbar Contacts

Use 2 busbar contacts per housing to provide a quick disconnect input or output busbar

connection. Busbar contacts are for mating with wire contacts only. Part number 350BBS

includes lock nuts. Locknuts must be ordered separately for B01998P1.

Mating

Type Thread Force - Loose Piece Part Numbers -

Minimum Quantity .................. 50 10 .............

Busbar 3/8-16 High B01998P1 350BBS

Lock Nut 3/8-16 - H1216P9 110G73

NOTE: Has not been tested by UL.

NOTE 2: Refer to the Constructional Data form for additional

information on our website., www.andersonpower.com

Protection

Touch Safety with Wire Contacts

IEC 60529 IP10

Unmated

Mated

Connector

Series Configurations Creepage/Clearance

per IEC 60950-1

IIIa

Material

Group

SB®350 5.66 mm

5.66 mm

Attributes SB350

AMP Rating AC/DC 350

Voltage Rating AC/DC (Steady State) 500 V AC/DC (Operational)

Breaking Capacity - AMP Rating /Cycles 100 Amp / 10 cycles

Voltage Rating (Breaking Capacity) 125 VDC

Finger Safety - Mated only IEC 60529 - IP20

Wire Size tested 120 mm²

Contact Series Tested 908

Climatic Testing (Cold,Heat & MFG) IEC 60512 Test -11j, 11i & 11g,

Cycle Life IEC 60512 Test 9a - 5000 Cycles

Mechanical Strength Impact IEC 60512-5 @ 29.5 Inches - dropped 8 times

Temperature Range -20 °C to 105 °C

-4 °F to 221 °F

| IEC INFORMATION |

- 84 - All Data Subject To Change Without Notice

www.andersonpower.com

The given wire O.D. information is an estimate. Cable clamps should be evaluated for

performance with the actual wire to be used.

| SB®350 CONNECTOR TEMPERATURE CHARTS|

| SB® 350 ACCESSORIES |

SB®350

Derating vs. Ambient Temperature

Ambient Temperature (°C)

Amperes Applied

350 MCM 300 MCM 4/0 AWG

3/0 AWG 2/0 AWG 1/0 AWG

100

125

0 50 100 150 200 250 300 350 400 450 500 550

Cable Clamps

Durable metal cable clamps securely hold cables to prevent accidental strain or pulls from

dislodging wire or contacts from the housing. Cable clamps are recommended for solder

terminated wires.

Cable Size

Min / Max Min / Max

Description Inches O.D. mm O.D. - Part Numbers -

Minimum Quantity ............................................................................... 10 .....

Bolt On for Discrete Conductor 1.00 to 0.35 25.4 to 8.8 996G1

Discrete Conductor w/ Integral Handle 0.76 to 0.32 19.3 to 8.2 911

Handles

Handles are made out of durable PC plastic.

Hardware to attach to connector body included in kits.

Description ----- Part Numbers -----

Minimum Quantity .... 100 25 ...

Gray Handle Kit - 995G2

Red Handle Kit - 995G4

Handle Only, Gray 3-5074P1 -

Handle Only, Red 3-5074P3 -

Handle Only, Black 3-5074P5 -

Hardware Bag - 106G7

Dust Cover

Prevents dust and dirt from entering the mating interface

of the connector when unmated. NOTE: Not a Hermetic Seal.

Description ----- Part Numbers -----

Minimum Quantity .............................. 500 50 ...

Dust Cover with Lanyard Strap, Red 113890P3 134G3

SB®350 Lockout

Slide cover over

mating end.

Amperes Applied

350 MCM 300 MCM 4/0 AWG

3/0 AWG 2/0 AWG 1/0 AWG

SB®350

Temperature Rise at Constant Current

Temperature Rise

Above Ambient (°C)

0 50 100 150 200 250 300 350 400 450 500

Handle

Clamp

“A” frame handle

(not included).

911

996G1

For Temperature Rise Above 60°C, Consult the Extended Temperature Rise Charts in the Appropriate Product Section on the Website.

Current - Temperature Derating per IEC 60512-5-2 Test 5B

Temperature rise charts are based on a

25°C ambient temperature.

SECTION 3

SB® 350

- 85 -

All Data Subject To Change Without Notice www.andersonpower.com

SECTION 3

SB® 350

Mounting Half

(charger).

Locking Half

Components

Mounting Half

SB350 Connector

not included.

Wire Entrance

[ 28.4 ]

1.12 [ 11.1 ]

0.44

2018-0054 DS-SB350 REV C6

Works with standard lockout - tagout equipment to prevent access to

the mating interface of the connector. Made from durable PC plastic.

Description --- Part Number ---

Minimum Quantity ........... 25 .....

Red Lockout - Tagout Kit SB350-LOCKOUT

Manual Release Bracket - Mounting Side

Works with the Locking Side to ease mating and unmating connectors.

Description ----------- Part Numbers ----------

Minimum Quantity ........... 66 25 10 ...

Bracket and Hardware Kit - - 922G1

Bracket Only B00229P1 - -

Hardware Bag - 106G6 -

Manual Release Bracket - Locking Side with Cable Clamp

Works with the Mounting Side to ease mating and unmating connectors.

Cable Size

Min / Max Min / Max

Description Inches O.D. mm O.D. - Part Numbers -

Minimum Quantity ............................................................................... 10 ..........

Bracket and Hardware Kit w/ Clamp Kit 0.94 to 0.61 23.7 to 15.5 919

The given wire O.D. information is an estimate. Cable clamps should be evaluated for

performance with the actual wire to be used.

Manual Release Bracket - Locking Side no Cable Clamp

Works with the Battery side to ease mating and unmating connectors.

Description - Part Numbers -

Minimum Quantity ................................... 10 .............

Bracket and Hardware Kit No Clamp Kit 919G1

Reducing Bushings: for Use with Contact # 907

Use with contact part number 907-BK to allow a smaller wire to be used

with the connector. Electrical capability is derated with smaller wire.

Contact Barrel Size Wire Size --- Part Numbers ---

Minimum Quantity ......................................... 500 100 ...

2/0 AWG [67.4 mm²] 1/0 AWG [53.5 mm²] 5918-BK 5918

- 86 - All Data Subject To Change Without Notice

www.andersonpower.com

SB®

- Tooling Information

1307

5900

#8 8.4 5952

5953

5915

#1 42.4 1323G1

#2 33.6 1319

#4 21.2 1319G4

#6 13.3 1319G6

#1 42.4 1347

1387G2 1303G13 1304G32 Double

#6 13.3 1348 1387G1 1388G4 1389G3 Single

300mcm 152 910

4/0 107.2 908 1303G3

3/0 85 916

2/0 67.4 907

1/0 53.5 917

Double

SB®50

N/A

1387G2 1304G31

1303G12

Single

1387G1

1388G6

SB®120

#10 / 12

Single

5.3 / 3.3 1388G7

#6 13.3 1389G6

1309G4

SB®175

1/0 53.5 1382

1388G3

#2 33.6 1383

1388G4 1389G4

SB®350

#4 21.1 1384

1387G11368

Series

AWG mm² Hand

Tool Pneumatic

Bench Tool Die Locator

Number

Crimps

Wire Size Loose Piece Contact Crimp Tools

Loose Piece

Part Numbers

Silver

Plating

NOTE: See website for the most current information.

1368

Series

1368

Series

1389G7

SECTION 3

SB®