FicheSLXVA24/05/0014:13Page2 SLX Crimp version industrial circular connectors Mechanical characteristics * 12 insert arrangements which accept contact gauges AWG 20, 16, 12. in the four different shell sizes 10, 20, 30 & 40 * Crimp removable gold plated on nickel underplate machined contacts * Temperature range -55C to 125C * Bright cadmium plated aluminium molded shells * Mating by screwing system * Strain-relief integrated to the backshell * Neoprene inserts * Reinforced mating screw * Cadmium-free versions * UL recognition n E160967(01) for 419AR layout DESCRIPTION TECHNICAL CHARACTERISTICS NEW ons e versi e r f m u Cadmi el plating) (nick SLX series are derived from the standard SL series, and have the particularity to use machined contacts with crimp barrels. The one part Neoprene insert provides a use in a temperature range from -55C to 125C, the possibility to change the contacts for reparation, and an higher test voltage capability. 12 different contacts arrangements are available which include different contact gauges (20, 16, 12) in the four different shell sizes 10, 20, 30 & 40. SLX series panel drilling is the same as for SL series and SLX series connectors are intermatable with SL series connectors (SLX Plug with SL Receptacle and vice versa). Electrical characteristics * Contacts caracteristics 16 1.5 13 0.002 40 * Contact arrangements electrical caracteristics E103/B Test voltage at sea level (Vrms) Contact arrangements 1500 14V-17P-22B 23C-212AF-38J 315K 2300 27E-337P 439R Crimp removable contacts 1250C 12 3 25 0.002 45 2800 319L-419AR * Instrumentation * Robotics * Power supplies * Transportation * Entertainment (brand-lights) SLX 20 1 7.5 0.005 30 APPLICATIONS Contact gauge AWG Contact diameter (mm) Nominal current (A) Contact resistance (Ohm) Contact retention in the insert (N) DIMENSIONAL CHARACTERISTICS FicheSLXVA24/05/0014:13Page3 * Contacts and wires Contact gauge AWG 12 16 20 Crimp barrel Internal Depth diameter in mm in mm 2.5 7.5 1.95 6.4 1.35 4 Pin diameter (mm) AWG gauge 3 1.6 1 14-12 20 -> 14 24 -> 18 Section mm2 mini maxi 1.80 0.60* 0.22** 3.30 1.91 0.93 Diameter over conductor Maxi (mm) diameter mini maxi over sleeving (mm) 1.7 2.45 4.2 1 1.9 2.8 0.6 1.3 2.4 * The use of a 800629 reducing sleeve is necessary for cable section less than 0.60 mm2 for # 16 contacts ** The use of a 800612 reducing sleeve is necessary for cable section less than 0.22 mm2 for # 20 contacts * Dimensions of the connectors (15,1 for size 10) (24,1 for size 10) OH OH OH OH All dimensions are given in mm For more details about dimensional characteristics, please refer to standard SL data-sheet. Some dimensions mentioned bellow regarding insulators are specific to SLX series. Receptacle size 10 20 30 40 A (mm) 25 31 46 56 Diam. B (mm) 21 28.1 42.2 52.2 C (mm) 19 24 34 41 Diam. D (mm) 28 37 52 65 Diam. E (mm) 3.2 3.5 3.5 3.5 Diam. F (mm) 16.5 25.5 35.5 47 Diam. H (mm) 3.2 3.5 3.5 3.5 Contacts insert arrangements Mating face view of the male insert 14 V 17 P 27 E 212 AF 319 L 337 P 22 B 38 J 419 AR 23 C 315 K 439 R OVERALL DIMENSIONS FicheSLXVA24/05/0014:13Page4 Straight or right-angle backshell Backshell reference Connector size black (non conductive) straight nickel (conductive) 47377N 47378N 47379N 47380N 47377NI 47378NI 47379NI 47380NI 10 20 30 40 green cadmium black (conductive) (non conductive) 21458N 21459N 21460N 21461N 47381N 47382N 47383N 47384N right-angle nickel (conductive) green cadmuim (conductive) 47381NI 47382NI 47383NI 47384NI 21462N 21463N 21464N 21465N - Straight or right-angle backshells are delivered with different clamping pads. - Green backshells (conductive finish) are delivered with metallised clamping pads. Contacts as spare parts Contact gauge AWG Part-number for one pin Part-number for one socket 12 21713 21728 16 800660 800664 20 800650 800654 Accessories Plug and receptacle protection caps: F SLB M Receptacle with locking Sealing sleeve: ring protection caps: 3B F BF F: Plug E: Receptacle M: Pin connector F: Socket connector Plug and receptacle: none Line mount receptacle: R Size 1B: 10 2B: 20 M: Pin connector F: Socket connector Size 1B: 10 2B: 20 3B Adaptator for flexible conduit and PG: Connector Size Ref. Straight Right-angle Straight or Right-angle 10 10 20 30 40 43458 43473 43456 44666 43457 } 3B: 30 4B: 40 SL RF 209N SL RF 211N SL RF 313N SL RF 316N SL RF 416N SL RF 421N SL RF 429N Connector size PG thread 20 20 30 30 40 40 40 9 11 13 16 16 21 29 3B: 30 4B: 40 for plug or line mount receptacle Cabling tools * Crimping tools * Crimping pliers: 809857 (Mil. P/N: M22520/1-01) * Positioner: 21770 * Controlling jauge: 809907 (Mil. P/N: M22520/3-1) (Selector number: 4) # # # # # # Contacts 12: Pin 12: Socket 16: Pin 16: Socket 20: Pin 20: Socket Insertion tool P/N 141900 141900 48680 48680 39048 39048 Removal tool P/N 21746 21745 809731 809732 809729 809730 Cabling process * Crimping process Place the positioner in the pliers. Choose the selector number on the positioner according to the contact size to crimp. Strip the wire end (7.5mm for size 12 contact / 6mm for size 16 contact / 4mm for size 20 contact). Insert the wire in the crimp barrel of the contact and check through the inspection hole of the contact that wire is wellplaced. Place the contact with the wire into the pliers until the stop. Completely close the tool and after, let it open itself. Visually check if crimping is correct and by the inspection hole of the contact if the wire is well-placed in the crimp barrel. * Contact insertion Insert the wired contact in the groove of the tool, taking care that the extremity of the tool touches the shoulder of the contact. Insert the contact in its cavity from wiring side and steadily push the tool along the axis of the cavity until the contact locks home. Carefully withdraw the tool , applying a forward pressure on the wire. Pull on the wire to check that the contact is correctly locked. * Contact removal Insert the tool from the mating side and push it along the contact axis until contact unlocks. Pull the contact out from the rear of the connector. SLX * Contacts insertion and removal HOW TO ORDER FicheSLXVA24/05/0014:13Page1 Connectors In-line receptacle or plug body SLX series SLX B M - 27E - M D 27E - Mobile plug or in-line receptacle Contacts: M: pin F: socket Insert arrangement (See previous page 2) Add "NI" for cadmium-free versions (nickel) Plug and backshell set SLX series SLX F F: Plug or line mount receptacle type of contact: M: Male F: Female D: Plug + straight backshell DR: Line mount receptacle + backshell C: Plug + right angle backshell Contact arrangement (See page 2) Add "NI" for cadmium free versions (nickel) Square flange receptacle or square flange receptacle with mating screw* SLX series SLX E F - 27E - - Receptacle Contacts: M: pin F: socket Shell style: None: square flange receptacle E: square flange receptacle with mating screw Insert arrangement (See previous page 2) Add "MA" for tin plated retention ring (grounding) Add "NI" for cadmium-free versions (nickel) * (Receptacle with mating screw mates with in-line receptacle) Connectors are delivered with non-fitted contacts to allow the crimping process. Comment: Panel gasket is delivered with the receptacle. Do not hesitate to contact us for further information A mphenol Amphenol Socapex Mil/Aero & Industrial Business Unit 948, Promenade de l'Arve - BP 29 F - 74311 Thyez Cedex Tel.: +33 (0) 4 50 89 28 00 - Fax: +33 (0) 4 50 96 19 41 http://www.amphenol.com Sales office Tel.: +33 (0) 1 49 05 30 00 - Fax: +33 (0) 1 49 05 30 43 E103/B None: plug R: in-line receptacle The information given in this document are as a guideline only. We reserve the right to modify our products in any way we deem necessary. Any duplication is prohibited, unless approved in writing. Mediasquare +33 (0) 1 46 31 36 36 Shell style: