DESCRIPTION
APPLICATIONS
•Instrumentation
•Robotics
•Power supplies
•Transportation
•Entertainment (brand-lights)
TECHNICAL CHARACTERISTICS
SLX
Mechanical characteristics
•12 insert arrangements which accept contact gauges AWG 20, 16, 12.
in the four different shell sizes 10, 20, 30 & 40
•Crimp removable gold plated on nickel underplate machined contacts
•Temperature range -55°C to 125°C
•Bright cadmium plated aluminium molded shells
•Mating by screwing system
•Strain-relief integrated to the backshell
•Neoprene inserts
•Reinforced mating screw
•Cadmium-free versions
•UL recognition n° E160967(01) for 419AR layout
Electrical characteristics
•Contacts caracteristics
Contact gauge AWG 20 16 12
Contact diameter (mm) 11.53
Nominal current (A) 7.5 13 25
Contact resistance (Ohm) ≤0.005 ≤0.002 ≤0.002
Contact retention in the insert (N) ≥30 ≥40 ≥45
E103/B
Crimp removable
contacts
1250C
Crimp removable
contacts
1250C
Crimp version industrial circular connectors
SLX
•Contact arrangements electrical caracteristics
Test voltage at sea level (Vrms) 1500 2300 2800
Contact arrangements 14V-17P-22B 27E-337P 319L-419AR
23C-212AF-38J 439R
315K
SLX series are derived from the standard
SL series, and have the particularity to
use machined contacts with crimp barrels.
The one part Neoprene insert
provides a use in a temperature range
from -55°C to 125°C, the possibility
to change the contacts for reparation,
and an higher test voltage capability.
12 different contacts arrangements
are available which include different
contact gauges (20, 16, 12)
in the four different shell sizes 10,
20, 30 & 40. SLX series panel drilling
is the same as for SL series and
SLX series connectors are intermatable
with SL series connectors (SLX Plug
with SL Receptacle and vice versa).
NEW
Cadmium-free versions
(nickel plating)
Fiche SLX VA 24/05/00 14:13 Page 2
DIMENSIONAL CHARACTERISTICS
•Contacts and wires
Contact Crimp barrel Pin AWG Section mm
2
Diameter over conductor Maxi
gauge Internal Depth diameter gauge mini maxi (mm) diameter
AWG diameter in mm (mm) mini maxi
over sleeving
in mm (mm)
12 2.5 7.5 3 14-12 1.80 3.30 1.7 2.45 4.2
16 1.95 6.4 1.6 20 -> 14 0.60* 1.91 1 1.9 2.8
20 1.35 4 1 24 -> 18 0.22** 0.93 0.6 1.3 2.4
* The use of a 800629 reducing sleeve is necessary for cable section less than 0.60 mm
2
for # 16 contacts
** The use of a 800612 reducing sleeve is necessary for cable section less than 0.22 mm
2
for # 20 contacts
•Dimensions of the connectors
For more details about dimensional characteristics, please refer to standard SL data-sheet.
Some dimensions mentioned bellow regarding insulators are specific to SLX series.
Receptacle A Diam. B C Diam. D Diam. E Diam. F Diam. H
size (mm) (mm) (mm) (mm) (mm) (mm) (mm)
10 25 21 19 28 3.2 16.5 3.2
20 31 28.1 24 37 3.5 25.5 3.5
30 46 42.2 34 52 3.5 35.5 3.5
40 56 52.2 41 65 3.5 47 3.5
Ø H
Ø H
Ø H
Ø H
(15,1 for size 10) (24,1 for size 10)
14 V 17 P 22 B 23 C
27 E 212 AF 38 J
319 L 337 P 419 AR 439 R
315 K
All dimensions are given in mm
Contacts insert arrangements
Mating face view of the male insert
Fiche SLX VA 24/05/00 14:13 Page 3
SLX OVERALL DIMENSIONS
Contacts as spare parts
Contact gauge AWG 12 16 20
Part-number for one pin 21713 800660 800650
Part-number for one socket 21728 800664 800654
Cabling tools
•Contacts insertion and removal
Cabling process
•Crimping process
Place the positioner in the pliers.
Choose the selector number on the positioner according to
the contact size to crimp.
Strip the wire end (7.5mm for size 12 contact / 6mm for size
16 contact / 4mm for size 20 contact).
Insert the wire in the crimp barrel of the contact and check
through the inspection hole of the contact that wire is well-
placed.
Place the contact with the wire into the pliers until the stop.
Completely close the tool and after, let it open itself.
Visually check if crimping is correct and by the inspection
hole of the contact if the wire is well-placed in the crimp
barrel.
•Contact insertion
Insert the wired contact in the groove of the tool, taking care
that the extremity of the tool touches the shoulder of the contact.
Insert the contact in its cavity from wiring side and steadily
push the tool along the axis of the cavity until the contact
locks home.
Carefully withdraw the tool , applying a forward pressure on
the wire.
Pull on the wire to check that the contact is correctly locked.
•Contact removal
Insert the tool from the mating side and push it along the
contact axis until contact unlocks.
Pull the contact out from the rear of the connector.
Contacts Insertion tool P/N Removal tool P/N
# 12: Pin 141900 21746
# 12: Socket 141900 21745
# 16: Pin 48680 809731
# 16: Socket 48680 809732
# 20: Pin 39048 809729
# 20: Socket 39048 809730
Straight or right-angle backshell
- Straight or right-angle backshells are delivered with different clamping pads.
- Green backshells (conductive finish) are delivered with metallised clamping pads.
Accessories
•Crimping tools
• Crimping pliers: 809857 (Mil. P/N: M22520/1-01)
• Positioner: 21770
• Controlling jauge: 809907 (Mil. P/N: M22520/3-1)
(Selector number: 4)
10 47377N 47377NI 21458N 47381N 47381NI 21462N
20 47378N 47378NI 21459N 47382N 47382NI 21463N
30 47379N 47379NI 21460N 47383N 47383NI 21464N
40 47380N 47380NI 21461N 47384N 47384NI 21465N
Backshell reference
Connector straight right-angle
size black nickel green cadmium black nickel green cadmuim
(non conductive) (conductive) (conductive) (non conductive) (conductive) (conductive)
Adaptator for flexible conduit
and PG:
Sealing sleeve:Plug and receptacle protection
caps:
Receptacle with locking
ring protection caps:
Connector PG
size thread
SL RF 209N 20 9
SL RF 211N 20 11
SL RF 313N 30 13
SL RF 316N 30 16
SL RF 416N 40 16
SL RF 421N 40 21
SL RF 429N 40 29
Connector Size Ref.
Straight 10 43458
Right-angle 10 43473
Straight 20 43456
or 30 44666
Right-angle 40 43457
}
F3B
BF
Size
1B: 10 3B: 30
2B: 20 4B: 40
M: Pin connector
F: Socket connector
FM 3B
SLB
F: Plug
E: Receptacle
Size
1B: 10 3B: 30
2B: 20 4B: 40
M: Pin connector
F: Socket connector
Plug and receptacle: none
Line mount receptacle: R
for plug or line mount
receptacle
Fiche SLX VA 24/05/00 14:13 Page 4
HOW TO ORDER
E103/B
Connectors
In-line receptacle or plug body
Square flange receptacle or square flange receptacle with mating screw*
* (Receptacle with mating screw mates with in-line receptacle)
Connectors are delivered with non-fitted contacts to allow the crimping process.
Comment: Panel gasket is delivered with the receptacle.
BM - -27E
Mobile plug or in-line receptacle
Contacts:
M: pin
F: socket
Shell style:
None: plug
R: in-line receptacle
Insert arrangement (See previous page 2)
Add "NI" for cadmium-free versions (nickel)
SLX series SLX
EF - - -27E
Receptacle
Contacts:
M: pin
F: socket
Shell style:
None: square flange receptacle
E: square flange receptacle with mating screw
Insert arrangement (See previous page 2)
Add "MA" for tin plated retention ring (grounding)
Add "NI" for cadmium-free versions (nickel)
SLX series SLX
Plug and backshell set
F M D 27E
F: Plug or line mount receptacle
type of contact:
M: Male
F: Female
D: Plug + straight backshell
DR: Line mount receptacle + backshell
C: Plug + right angle backshell
Contact arrangement (See page 2)
Add "NI" for cadmium free versions (nickel)
SLX series SLX -
Do not hesitate to contact us for further information
The information given in this document are as a guideline only. We reserve the right to modify our products in any way we deem necessary. Any duplication is prohibited, unless approved in writing.
Médiasquare +33 (0) 1 46 31 36 36
Amphenol Socapex
Mil/Aero & Industrial Business Unit
948, Promenade de l’Arve - BP 29
F - 74311 Thyez Cedex
Tel.: +33 (0) 4 50 89 28 00 - Fax: +33 (0) 4 50 96 19 41
http://www.amphenol.com
Sales office
Tel.: +33 (0) 1 49 05 30 00 - Fax: +33 (0) 1 49 05 30 43
Amphenol
Fiche SLX VA 24/05/00 14:13 Page 1
