35
Printmount Line
Technical Data MTG, MCS, MTP und MTL 3/
4"
Actuating force
Contact travel
End stop strength
(IEC 512-5 Test 9a,
actuating force
5N) /Lifetime
2,9N ±0,5N
0,4mm ±0,1mm
2,5N
IP40: 0,4mm IP54: 0,3mm
2N ±0,5N
0,4mm ±0,1mm
> 50N
> 106 Operations
1.Mechanical data MCS MTPMTG
Contact material
Switching voltage max.
Switching current max.
Rated breaking capacity
Lifetime (at rated breaking capacity)
(IEC 512-2, mV-Method)
Initial contact resistance, new
Initial contact resistance, after 106 cycles
Insulation resistance
Contact bounce time
> 106
Cycles
< 50mΩ
< 150mΩ
> 108Ω
typ. 0,2ms
Gold
24V DC
50mA
0,36W
Silver
48V DC
125mA
2,40W
2.Electrical data
Degree of protection
Solderability(IEC 68-2-20 Test Ta, Method 1A)
(IEC 68-2-20 Test Tb, Method 1A)illuminated
Soldering heat resistancenon-illuminated
Ambient temperature
Storage temperature
-25 °C…+85 °C
-25 °C…+85 °C
IP 65
235 °C / 2 s
260 °C / 3 s
260 °C / 5 s
IP 40 / IP 65
235 °C / 2 s
260 °C / 3 s
260 °C / 5 s
IP 40
260 °C / 5 s
IP 40
235 °C / 2 s
260 °C / 3 s
260 °C / 5 s
3.Other data MCS MTP MTLMTG
Contact material gold
Contact material silver
Socket
Actuator
CuZn +2 µm Au
CuZn – 2,5µm Ag passivated
Thermoplast PES
Thermoplast PC
PBT
PMMA
MCS MTP MTLMTG
4.Materials
925.9730-32 925.9299-9301
925.9299-9301see page 38
5.LED data