Click on Series name for product info on aimtec.com Series AMER90-CAZ up to 3.75A | AC-DC / DC-DC | LED Driver / Converter FEATURES: * * * * * * * Models Single output Constant current LED Driver or Converter Input range 90-305VAC/47-440Hz High Efficiency up to 88% 115VAC Operating temperature -50 to 85C 230VAC Operating temperature -55 to 85C Dimmable via resistive 5 Years Limited Warranty Max Output Power (W) Output Voltage Range (V) Output Current (A) Input Voltage (VAC/Hz) Input Voltage (VDC) AMER90-50180CAZ 90 36-50 1.8 90-305/47-440 130-430 AMER90-36250CAZ 90 24-36 2.5 90-305/47-440 130-430 Model AMER90-24375CAZ Add suffix "-F" 90 12-24 3.75 90-305/47-440 130-430 * * * * * Over Temperature Protection Waterproof Case rated IP68 Power Factor Correction Short Circuit Protection Over Current Protection Mode of Operation Efficiency (%) 115 230 277 VAC VAC VAC Constant Current Constant Voltage Constant Current 87 88 86 87 86 87 87 87 87 88 87 87 86 86 86 87 86 86 Constant Voltage Constant Current Constant Voltage No dimming option Exceeding the maximum output power will permanently damage the converter. The dimming feature is not supported when units are used in Constant Voltage mode only, Aimtec suggests to order "-F" No dimming option in the case. In constant current mode output current is maximum shown, in constant voltage mode output voltage is the maximum shown. All models can be ordered with optional North American colour input wires (black (L), white (N), green (GND)). Add "-NA" to part number when ordering. NOTE: Aimtec limited warranty of 5 years is valid based on product operation at datasheet specifications at ambient temperature of 25C, humidity<75%, nominal input voltage (115/230/277VAC) and at rated output load unless otherwise specified. See http://www.aimtec.com/terms-sale AMER90-CAZ's AC/DC LED drivers have electrical safeguards designed within to protect it from conventional electrical abnormalities with the levels listed in the safety table. Applications for use within rural agricultural, heavy industrial, and other areas or regions which are prone to `dirty' electrical conditions which would subject any of the above models to excessive voltages surges or spikes, may damage or cause early life failure of product. In this case consideration should be made by the end user to ensure that adequate line or mains surge suppression is installed in front of Aimtec device to ensure the longevity of the products. Failure to identify excessive line surges violations prior to installation may damage sensitive equipment permanently. Input Specifications Parameters Current (full load) Inrush current <2ms(cold start) Leakage current Power factor External fuse Start-up time www.aimtec.com F 052.1e R3.P Conditions Typical 115 VAC 230 VAC 277 VAC 115 VAC 230 VAC 277 VAC I/O I/FG, O/FG 115 VAC 230 VAC 277 VAC Recommended slow blow type Maximum 1500 600 500 40 50 60 0.25 3.5 0.98 0.94 0.90 2.5 1000 Tel: +1 514 620 2722 1 of 10 Units mA mA mA A A A mA mA A ms Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AMER90-CAZ up to 3.75A | AC-DC / DC-DC | LED Driver / Converter Output Specifications Parameters Conditions Typical Maximum Units Current accuracy 3 % Line regulation (LL-HL) 2 % Load regulation 0-100% load 3 % Ripple & Noise* 150 mV p-p Hold-up time 100 ms 100-10 % Current adjustment range Ripple and Noise are measured at 20MHz bandwidth by using a 0.1F (M/C) or (C/C) and 47F (E/C) parallel capacitor. Note: from 0% to 10% dimming adjustment signal instability may be present. Isolation Specifications Parameters Tested voltage Conditions I/O I/FG O/FG Isolation resistance Typical 3sec 500VDC Rated Units 3750 2000 500 VAC VAC VAC M >1000 General Specifications Parameters Conditions Typical Maximum Units 125 1.87 2.57 3.8 KHz Switching frequency Over current protection Over current protection Over voltage protection Short circuit protection Short circuit restart Over temperature protection Operating temperature (See Derating Table) Cold Start-up Time Maximum case temperature Storage temperature Temperature coefficient Cooling Humidity Case material Potting Wires Weight Dimensions (L X H X W) MTBF AMER90-50180CAZ AMER90-36250CAZ AMER90-24375CAZ 105 Refer to Constant Current vs. Constant Voltage Mode curve Continuous Auto recovery >105C (115VAC) -50 to +85 (230VAC) -55 to +85 -55C % oC o 35 100 -55 to +95 0.02 Free air convection 95 Aluminum Epoxy (IP68 rated) UL1015 18AWG Input & 14AWG Output *20CM 900 7.13 x 2.32 x 1.85 inches 181.00 x 59.00 x 47.00 mm >400,000 hrs (MIL-HDBK-217F at +25C) A C Sec oC oC % / oC % RH g Safety Specifications Parameters Agency approvals Standards www.aimtec.com F 052.1e R3.P CE Designed to meet UL8750, IEC/EN 60950-1 standards, EN55022, class B, EN60529(IP68) Information Technology Equipment EN55022 Class B Harmonic Current Emissions IEC/EN 61000-3-2, Class C Voltage fluctuations and flicker IEC/EN 61000-3-3, (EN60555-3) Electrostatic Discharge Immunity IEC 61000-4-2 Level 3 RF, Electromagnetic Field Immunity IEC 61000-4-3 Level 2 Electrical Fast Transient / Burst Immunity IEC 61000-4-4 Level 2 Surge Immunity IEC 61000-4-5 Level 3 RF, Conducted Disturbance Immunity IEC 61000-4-6 Level 2 Power frequency Magnetic Field Immunity IEC 61000-4-8 Level 1 Voltage dips, Short Interruptions Immunity IEC 61000-4-11 Tel: +1 514 620 2722 2 of 10 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AMER90-CAZ up to 3.75A | AC-DC / DC-DC | LED Driver / Converter Dimensions Top View 181.00 (7.13) 4.00 (0.16) 41.00 (1.73) 27.00 (1.06) 8.00 (0.32) 11.00 (0.43) End View Tc 23.00 (0.91) Side View 200.00 (8.00) 47.00 (1.85) 200.00 (8.00) 59.00 (2.32) 2.30 (0.09) Input/Output Wires are 18 AWG 20cm Measurements in Millimeters (inch) Case Tolerance: 0.5 (0.02) Wire connection: Connection Wire Brown Blue Green Red Black Blue (Dimming) White (Dimming) AC L AC N Ground +V output -V Output + Vs dimming -Vs dimming Analog (resistive) Dimming Application Circuit BROWN L GREEN +Vout RED 1st LED Model Number 1 AC AMER90-AZ BLUE N 1 BLUE WHITE www.aimtec.com F 052.1e R3.P AMER90-50180CAZ AMER90-36250CAZ AMER90-24375CAZ -Vout Maximum Pot Value (k) 11.70 16.95 28.09 BLACK Pot Tel: +1 514 620 2722 3 of 10 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AMER90-CAZ up to 3.75A | AC-DC / DC-DC | LED Driver / Converter Analog (0-10V) Dimming Application Circuit PWM (1KHz) Dimming Application Circuit Temperature graph Free Air Convection 55 C 100 80 Safe Operating Area 60 40 20 0 -40 -20 0 20 40 60 80 85 100 Ambient Temperature C www.aimtec.com F 052.1e R3.P Tel: +1 514 620 2722 4 of 10 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AMER90-CAZ up to 3.75A | AC-DC / DC-DC | LED Driver / Converter Efficiency vs. Input Voltage and Output Current (CC mode) AMER90-50180CAZ (%) Efficiency VS. Input Voltage & Output Current 115Vac, 0.36, 85.63 115Vac, 1.8, 115Vac 230Vac, 90.641.8, 230Vac 89.021.8, 277Vac, 88.93 277Vac 277Vac, 0.36, 79.270.36, 230Vac, 77.91 (A) AMER90-36250CAZ (%) Efficiency VS. Input Voltage & Output Current 115Vac, 0.5, 85.948 115Vac 115Vac, 2.5, 230Vac, 230Vac 89.7 2.5, 277Vac, 88.6862.5, 88.686277Vac 277Vac, 0.5, 230Vac, 79.9260.5, 78.905 (A) www.aimtec.com F 052.1e R3.P Tel: +1 514 620 2722 5 of 10 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AMER90-CAZ up to 3.75A | AC-DC / DC-DC | LED Driver / Converter Efficiency vs. Input Voltage and Output Current (CC mode) AMER90-24375CAZ (%) Efficiency VS. Input Voltage & Output Current 115Vac 115Vac, 3.75, 230Vac, 3.75, 87.774 230Vac 277Vac, 3.75, 87.177 86.65 277Vac 115Vac, 0.75, 84.74 277Vac, 0.75, 77.222 230Vac, 0.75, 76.016 (A) PFC Value vs. Output Load Current (CC mode) AMEPR90-50180CAZ PF VS. Output Voltage (PF) 115VAC, 24, 230VAC, 0.996 24, 277VAC, 0.952 24, 0.904 293VAC, 24, 0.794 305VAC, 24, 0.488 115VAC, 50, 1 115VAC 230VAC, 50, 277VAC, 50, 0.975 230VAC 0.948 277VAC 293VAC, 50, 293VAC 0.767 305VAC 305VAC, 50, 0.502 (V) www.aimtec.com F 052.1e R3.P Tel: +1 514 620 2722 6 of 10 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AMER90-CAZ up to 3.75A | AC-DC / DC-DC | LED Driver / Converter PFC Value vs. Output Load Current (CC mode) AMER90-36250CAZ (PF) PF VS. Output Voltage 115VAC, 24, 230VAC, 0.996 24, 277VAC, 0.952 24, 0.904 293VAC, 24, 0.794 305VAC, 24, 0.488 115VAC, 50, 1 115VAC 115VAC, 36, 1 230VAC, 230VAC, 50, 36, 277VAC, 36, 230VAC 0.976 277VAC, 50, 0.975 293VAC, 36, 0.946 0.948 277VAC 0.878 293VAC 293VAC, 50, 305VAC 0.767 305VAC, 36, 305VAC, 50, 0.502 0.502 (V) AMER90-24375CAZ (PF) PF VS. Output Voltage 115VAC, 12, 0.995 12, 230VAC, 0.93 12, 277VAC, 0.86 297VAC, 12, 0.756 115VAC, 24, 115VAC 230VAC, 24, 1 277VAC, 24, 0.977 230VAC 297VAC, 0.953 24, 277VAC 0.881 297VAC 305VAC 305VAC, 12, 0.48 305VAC, 24, 0.505 (V) www.aimtec.com F 052.1e R3.P Tel: +1 514 620 2722 7 of 10 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AMER90-CAZ up to 3.75A | AC-DC / DC-DC | LED Driver / Converter Constant Current Mode vs. Constant Voltage Mode AMER90-50180CAZ Constant Current Vs Constant Voltage (A) 115 & 230 Vac, 36, 1.8 36 38 40 115 & 230 Vac, 50, 1.8 115 & 230115 & 230 Vac, 50.6, 0Vac, 52, 0 (V) AMER90-36250CAZ (A) Constant Current Vs Constant Voltage 115 & 230 Vac, 24, 2.5 36 24 26 28 115 & 230 115 & 230 Vac, 36.5, 0 Vac, 38, 0 (V) www.aimtec.com F 052.1e R3.P Tel: +1 514 620 2722 8 of 10 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AMER90-CAZ up to 3.75A | AC-DC / DC-DC | LED Driver / Converter Constant Current Mode vs. Constant Voltage Mode AMER90-24375CAZ (A) Constant Current Vs Constant Voltage 115 & 230 Vac, 12, 3.75 115 & 230 Vac, 24, 3.75 12 14 16 115 & 230115 & 230 Vac, 24.58, Vac, 0 26, 0 (V) Output Current vs. Radj AMER90-50180CAZ (A) Output Current VS. Dimming-Resistance 115 & 230 115 & 230 Vac, 2.88, Vac, 1.507, 1.62 1.44& 230 115 115 230 Vac,&0.941, 115 230 Vac,&1.26 0.628, 115 &0.435, 230 Vac,1.08 Vac, 0.9 0.299, 115 & 230 1150.72 & 230 Vac, 0.2, 0.54 115 0.0986, & 230 Vac, Vac,0.36 0.0669, 115 & 230 0.18 Vac, 0, 0 www.aimtec.com F 052.1e R3.P 115 & 230 Vac, 11.7, 1.8 0 0.0669 (K) Tel: +1 514 620 2722 9 of 10 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AMER90-CAZ up to 3.75A | AC-DC / DC-DC | LED Driver / Converter Output Current vs. Radj AMER90-36250CAZ (A) Output Current vs. Resistance adjustment 115 & 230 Vac, 115 & 230 3.262, Vac, 1.64, 22.25 115 & 230 115 230 Vac,&1.0145, 1150.679, & 230 Vac, 1.75 Vac, 0.46711, 1151.5 230 115 &&230 1.25 Vac, 0.3236, 115 & 230 1 Vac, 0.2218, 1150.75 & 230 Vac, 0.146, Vac, 0.08025, 0.5 115 & 230 Vac,0.25 0, 0 115 & 230 0 Vac, 16.946, 2.5 0.08025 K() AMER90-24375CAZ (A) Output Current VS. Dimming-Resistance 115 & 230 Vac, 3.588, 115 & 230 3.375 115 & 1.7365, 230 Vac, 3 Vac, 1.052, 115 & 230 1152.625 & 230 Vac, 0.7, 2.25 Vac, 115 & 0.466, 230 Vac, 0.333, 1151.875 & 230 Vac, 115 1.5 & 0.195, 230 Vac, 1.125 0.151, 115 & 230 Vac,0.75 0.082, 0.375 115 & 230 Vac, 28.09, 3.75 0 (K) NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec's standard Terms of Sale available at www.aimtec.com. www.aimtec.com F 052.1e R3.P Tel: +1 514 620 2722 10 of 10 Toll free: + 1 888 9 AIMTEC (924 6832) North America only