Factory Installed Panel Mount TRIMPOT(R) POTENTIOMETER PANEL MOUNTING OPTIONS AND HARDWARE Many Trimpot Potentiometers are available for panel mount application. Models RT12/RJ12, 3057/3059 Models 3005/3006/3009 HEX NUT AND LOCKWASHER (R) 20.32 (.80) 10.31 (.406) MAX. 6.35 (.25) #10-32 UNF-2A THD. This product option provides for maximum design flexibility. To order Trimpot(R) Potentiometers with panel mount hardware attached by the factory, simply add an "M" or "Z" suffix to the Bourns part number per Table I. 2.54 (.100) 7.95 (.313) 33.35 (1.31) 6.35 (.25) ADJ. SLOT 2.54 LONG (.100 ) .508 (.020) WIDE .762 (.030) DEEP Example: 3006P-1-100Z BUSHING 10-32 NF-2 THD To order military Trimpot(R) Potentiometers with panel mount hardware attached by the factory, order the military part number and add "with panel mount attached." Example: RT12C2PRC, with panel mount attached. 6.76 .38 (.266 .015) To order panel mounting accessories for customer installation, simply use the part number per Table II. ADJ. SLOT 2.54 LONG (.100) .635 (.020) WIDE .762 (.030) DEEP Example: H83P NOTE: For complete product specifications, see data sheet for the trimmer model. 3.81 (.150) 1.52 TO 3.30 (.06 TO .13) 7.92 (.312) PANEL 3.30 MAX. (0.13) 5.94 (.234) Torque - Apply maximum 8 in. lbs. on mounting nut when mounted on panel. NOTES: NOTES: 1. PROVIDED WITH LOCKWASHER AND MOUNTING NUT. .194 2. RECOMMEND PANEL HOLES. #10 DRILL (.008) 1. PROVIDED WITH LOCKWASHER AND MOUNTING NUT. .200 2. RECOMMEND PANEL HOLE SIZE #7 DRILL (.008) Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. Factory Installed Panel Mount Models RT22/RTR22/RJ22 3250/3252 Models 3292 H and W Styles - 3290 X & W StylesRT24/RTR24 X, L and W Styles 6.10 (.240) 3.05 (.120) 7.62 (.300) 4.06 (.160) BUSHING 10-32 UNF-2A THD. OPT. BEND DOWN ANTIROTATION TAB ADJ. SLOT .243 LONG (.010) .064 (.003) WIDE .064 (.003) DEEP BUSHING 10-32 UNF-2A THD. OPT. BEND DOWN ANTIROTATION TAB 6.35 (.250) 3.05 (.120) ADJ. SLOT .243 LONG (.010) .064 (.003) WIDE .064 (.003) DEEP 11.68 (.460) OPT. BEND DOWN ANTIROTATION TAB 13.97 (.550) PANEL 3.3 (.130) MAX 11.43 (.450) 11.68 (.460) 11.43 (.450) PANEL LAYOUT .826 .038 (.033 .020) PANEL 3.3 (.130) MAX 10.16 (.400) PANEL 3.3 (.130) MAX PANEL LAYOUT PANEL LAYOUT .200 = 7 DRILL (.008) .200 = 7 DRILL (.008) 7.37 (.290) .200 = 7 DRILL (.008) .132 OPTIONAL FOR (.005) ANTI-ROTATION NUB .132 OPTIONAL FOR (.005) ANTI-ROTATION NUB .132 OPTIONAL FOR (.005) ANTI-ROTATION NUB NOTES: NOTES: Provided with lockwasher and mounting nut 1. PROVIDED WITH LOCKWASHER AND MOUNTING NUT. ADJ. SLOT .243 LONG (.010) .064 (.003) WIDE .064 (.003) DEEP 6.35 (.250) 14.99 (.590) .826 .038 (.033 .020) 6.10 (.240) BUSHING 10-32 UNF-2A THD. 6.35 (.250) 10.92 (.430) 7.37 (.290) Models RT24/RTR24/3290 NOTES: NOTES: 1 Provided with lockwasher and mounting nut 1. PROVIDED WITH LOCKWASHER AND MOUNTING NUT. NOTES: 1. PROVIDED WITH LOCKWASHER AND MOUNTING NUT. Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. Customer Installed Panel Mount - Unsealed SEE TABLE II FOR PANEL MOUNT PART NUMBER H-58P Panel Mount H-65P Panel Mount 1-1/4 Inch Rectangular Multiturn Modules H-83P Panel Mount 1/2 Inch Square Multiturn Models Adapter for Models 3005 AND 3006 HEX NUT AND LOCKWASHER 10.31 (.406) MAX. 7.62 (.300) 4.06 (.160) BUSHING 10-32 UNF-2A THD. 7.95 (.313) OPT. BEND DOWN ANTIROTATION TAB 33.35 (1.31) The H-83P Adapter is used with Models 3005 and 3006. Order separately and simply snap fit the trimmer in the plastic case. The H-83P with lock-washer and mounting nut is available in 50-piece lots. ADJ. SLOT .243 LONG (.010) .064 (.003) WIDE .064 (.003) DEEP 6.35 (.250) 6.35 (.250) 13.97 (.550) BUSHING 10-32 NF-2 THD 22.10 (.870) 14.99 (.590) 10.0 (.394) 5/16-32 UNEF THREAD 11.43 (.450) 1.52 3.30 TO (.060) (.130) 5.54 (.218) 3.30 PANEL MAX. (0.13) ADJ. SHAFT RECESSED 5/16 PANEL LAYOUT 5.94 (.234) ADJ. SLOT 2.54 LONG (.100) .635 (.250) WIDE .762 (.030 ) DEEP 7.62 (.300) 10.16 (.400) .200 = 7 DRILL (.008) 9.53 (.375) 9.53 (.375) .132 OPTIONAL FOR (.005) ANTI-ROTATION NUB NOTES: NOTES: NOTES: 1. PROVIDED WITH LOCKWASHER AND MOUNTING NUT. .194 2. RECOMMEND PANEL HOLES. #10 DRILL (.008) 1. PROVIDED WITH LOCKWASHER AND MOUNTING NUT. 1. DRAWINGS SHOWN WITH TRIMMER. ORDER PART SEPARATELY 2. DRAWINGS SHOWN WITH TRIMMER. ORDER PART SEPARATELY *SPECIFY H82 IF PANEL SEAL IS REQUIRED. Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. Customer Installed Panel Mount H-114P/115P/116P Panel Mount 3/8 Inch Square Multiturn Models H-117P Panel Mount 3/8 Inch Square Multiturn Models 6.10 (.240) BUSHING 10-32 UNF-2A THD. OPT. BEND DOWN ANTIROTATION TAB ADJ. SLOT .243 LONG (.010) .064 (.003) WIDE .064 (.003) DEEP 11.43 (.450) (H-115P) (H-116P) 6.35 (.250) 10.92 (.430) (H-114P) 11.68 (.460) 8.255 (.325) (H-114P) BUSHING 10-32 UNF-2A THD. ADJ. SLOT 2.44 DIA. (.096) .635 (.025) WIDE .635 (.025) DEEP 6.10 (.240) 11.68 (.460) 11.68 (.460) 8.179 (.322) (H-115P) (H-116P) 2.54 (.100) 2.54 REF. (.100) REF. REF. 3.30 MAX. (0.13) PANEL LAYOUT 5.72 (.225) PANEL LAYOUT 5.08 = 7 DRILL (.200) .132 OPTIONAL FOR (.005) ANTI-ROTATION NUB 7.62 (.300) P/N WITH PANEL MOUNT 3005P-1-(RC) Z 3006P,Y, or W-1-(RC) Z 3009P or Y-1-(RC) Z 3057L,J,P, or Y-1-(RC) M 3059L,J,P, or Y-1-(RC) M 3250L or W-1-(RC) M 3252L or W-1-(RC) M 3290H or W-1-(RC) M 3292L,W, or X-1-(RC) M 3296W or X-1-(RC) M TABLE II RETRO-FIT PANEL MOUNTS FOR INSTALLATION BY CUSTOMER 8.76 .38 (.345 .015) PANEL 7.37 (.290) STANDARD P/N 3005P-1-(RC) 3006P,Y, or W-1-(RC) 3009P or Y-1-(RC) 3057L,J,P, or Y-1-(RC) 3059L,J,P, or Y-1-(RC) 3250L or W-1-(RC) 3252L or W-1-(RC) 3290 H or W-1-(RC) 3292L,W, or X-1-(RC) 3296W or X-1-(RC) 6.86 (.270) 4.06 (.160) 3.05 (.120) TABLE I FACTORY INSTALLED PANEL MOUNTS 5.08 DIA. (.200) 1.32 OPTIONAL FOR (.052) ANTI-ROTATION LUG Notes: 1. Provided with lockwasher and mounting nut. Notes: 1. Provided with lockwasher and mounting nut. 2. Drawings shown with trimmer. Order part separately. 2. Drawings shown with trimmer. Order part separately. STANDARD P/N 3005P-1-(RC) 3006P,Y, or W-1-(RC) 3057L,J,P, or Y-1-(RC) 3059L,J,P, or Y-1-(RC) 3250L, W, X-(RC) 3252L or W-1-(RC) 3252X-1-(RC) 3290 H or W-1-(RC) 3292L-1-(RC) 3292W OR X-1-(RC) RT12P,Y,L RJ12P,Y RT22L,W, X, RTR22L,W, X RJ22L,W RJ22X RT24W / RTR24W OR X RJR24W OR X ORDER PANEL MOUNT P/N H-83P H-83P H-58P* SCREW ASSY. H-58P* SCREW ASSY. H-65P-1* H-65P-3* H-65P-5* H-114P* H-115P* H-116P* H-58P* SCREW ASSY. H-58P* SCREW ASSY. H-65P-1* H-65P-3* H-65P-5* H-114P* H-117P* *Specify H-82 if panel seal is required. Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications Hardware For Special Mounting Applications H-82 Panel Seal H-25/H-28 Stacking Straps For all panel mounts with size 10-32 bushings. Models 3250, 3252 (H-25) and 3292 (H-28). 4.83 (.190) A STAINLESS STEEL CUP WASHER B 7.37 (.290) 1.02 (.040) C .381 (.015) DIMENSIONS .89 (.035) 4.83 (.190) A B RUBBER O RING C To be used with the following to provide panel seal: H-58P H-65P-1 H-65P-3 H-65P-5 H-114P H-115P H-116P H-117P THICKNESS REV. 01/12 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. H-25 .236 (.093) .363 (.143) 1.321 (.520) H-28 .178 (.070) .318 (.125) 1.064 (.419) .51 (.02) Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Bourns: LM-LP-1165 H-117P LM-LP-1002 H-116P H-65P-1 H-137-000 LM-LP-1004 H-83P H-836 H-25 H-37-7 H-856 H-851 H-854 H-830 H-831 H-832-3