For technical questions, contact: powertron@vishaypg.com
NPR NHR NPS NHS 2-T220 T221
Powertron
Document Number: 64213
Revision: 20-09-10
www.powertron.de
1
Type NPR / NPS NHR / NHS
Resistance Range 0.02 Ohms to 100kOhms 0.02 Ohms to 15kOhms
Power rating
free air 70°C
with heatsink
1.5 W
30 W
1.5 W
50 W
Thermal Resistance Rthj-c 3.5 K/W 2.1 K/W
Tolerances
from 0.02 Ohms
from 1.0 Ohms
2% / 5%
1% / 2% / 5%
Stability 0.5%
Temperature Coefcient
0.02 to 0.049 Ohms
0.05 to 0.099 Ohms
0.1 Ohms to 100 kOhms
±600 ppm/K
±300 ppm/K
±100 ppm/K
upon request ±50 ppm/K
Voltage Proof 2.0 kVDC 1.5 kVDC
Max. Voltage
depending on resistance value
1
10
100
1000
10000
2 Ohm 10 Ohm 100 Ohm 1 kOhm 5 kOhm 10 kOhm 100 kOhm
max. working voltage (VDC)
Operating Temperature Range -40 to 155°C
Resistor Material Thick Film
Substrate Al2O3
Housing Epoxy or PPS
Connector Material Cu tinned
Terminals 2
Max. Torque T220: 1 Nm
T221: 0.8 Nm
SPECIFICATIONS
Part Number - Resistance - Contact - Tolerance: NHR 2-T221 C 1.1 kOhms 1%
Ordering Information
Resistances from 0.02Ohm to 100kOhms•
Power Rating to 50Watt•
Resistance Tolerances to ±1%•
TCR to ±50ppm/K•
Load Stability to 0.5%•
TO-220 Housing•
Convenient SMD D2Pak Available•
For technical questions, contact: powertron@vishaypg.com
NPR NHR NPS NHS 2-T220 T221
Powertron
Document Number: 64213
Revision: 20-09-10
www.powertron.de
2
0
20
40
60
80
100
120
25 50 85 100 115 130 145 155
Temperature of the backplate (°C)
Power ( % from
nominal power)
Temperature Coefcient
SPECIFICATIONS (continued)
Derating
-8000
-3000
2000
7000
-50 -25 025 50 75 100 125
50ppm/K
100ppm/K
∆R/R (ppm)
Temperature (°C)
Dimension mm
tol.
(±mm) inches
tol.
(±inches)
A 12.70 0.2 0.50 0.008
B 10.16 0.2 0.40 0.008
C 0.76 0.1 0.03 0.004
D 5.08 0.1 0.20 0.004
E 4.00 0.1 0.16 0.004
F 1.20 0.1 0.05 0.004
G 14.60 0.2 0.57 0.008
H 15.00 0.2 0.59 0.008
I 17.33 0.2 0.68 0.008
J 0.40 0.1 0.02 0.004
K 1.85 0.1 0.07 0.004
Dimension mm inches
A 12.10 0.476
B 11.16 0.439
C 18.33 0.722
D 5.08 0.200
E 1.76 0.069
F 3.20 0.126
NPS / NHS 2-T220
Dimensions
Power Rating Notes -
The NPR / NHR Series Resistors must be attached to a suit-
able heatsink. The maximum internal resistor temperature is
155°C.
To specify an appropriate heatsink use the following formula :
RqH = TMAX - ( P x RqR ) - TA
P
Where: RqH = Thermal Resistance of Heatsink ( K/W )
R
qR = Thermal Resistance of Resistor ( K/W )
T
MAX = Maximum Temperature of Resistor
T
A = Ambient Temperature of Heatsink ( °C )
P = Power Through Resistor ( W )
For technical questions, contact: powertron@vishaypg.com
NPR NHR NPS NHS 2-T220 T221
Powertron
Document Number: 64213
Revision: 20-09-10
www.powertron.de
3
SPECIFICATIONS (continued)
NPR / NHR 2-T220
NPR / NHR 2-T221
Dimension mm
tol.
(±mm) inches
tol.
(±inches)
A 17.30 0.2 0.68 0.008
B 10.16 0.2 0.40 0.008
C 6.00 0.1 0.24 0.004
D Ø3.7 0.1 Ø0.146 0.004
E 16.40 0.2 0.65 0.008
F 5.08 0.1 0.20 0.004
G 0.76 0.1 0.03 0.004
H 1.30 0.1 0.05 0.004
I 10.00 0.2 0.39 0.008
I (C-Contact) 13.80 0.2 0.54 0.008
J 2.00 0.1 0.08 0.004
K 1.20 0.1 0.05 0.004
L 4.00 0.1 0.16 0.004
M 2.90 0.1 0.11 0.004
N 0.40 0.1 0.02 0.004
O 1.85 0.1 0.07 0.004
Dimension mm
tol.
(±mm) inches
tol.
(±inches)
A 18.30 0.2 0.72 0.008
B 10.16 0.2 0.40 0.008
C 3.70 0.1 0.15 0.004
D Ø3.2 0.1 Ø0.126 0.004
E 16.40 0.2 0.65 0.008
F 5.08 0.1 0.20 0.004
G 0.76 0.1 0.03 0.004
H 1.30 0.1 0.05 0.004
I 10.00 0.2 0.39 0.008
I (C-Contact) 13.80 0.2 0.54 0.008
J 2.00 0.1 0.08 0.004
K 1.20 0.1 0.05 0.004
L 4.00 0.1 0.16 0.004
M 3.90 0.1 0.15 0.004
N 0.40 0.1 0.02 0.004
O 1.85 0.1 0.07 0.004
Vishay Precision Group
Document No.: 63999
Revision: 27-Apr-11
www.vishaypg.com
1
Legal Disclaimer Notice
ALL PRODUCTS, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE.
Vishay Precision Group, Inc., its affiliates, agents, and employees, and all persons acting on its or their
behalf (collectively, “Vishay Precision Group”), disclaim any and all liability for any errors, inaccuracies or
incompleteness contained herein or in any other disclosure relating to any product.
The product specifications do not expand or otherwise modify Vishay Precision Group’s terms and conditions of
purchase, including but not limited to, the warranty expressed therein.
Vishay Precision Group makes no warranty, representation or guarantee other than as set forth in the terms
and conditions of purchase. To the maximum extent permitted by applicable law, Vishay Precision Group
disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability,
including without limitation special, consequential or incidental damages, and (iii) any and all implied
warranties, including warranties of fitness for particular purpose, non-infringement and merchantability.
Information provided in datasheets and/or specifications may vary from actual results in different applications
and performance may vary over time. Statements regarding the suitability of products for certain types of
applications are based on Vishay Precision Group’s knowledge of typical requirements that are often placed on
Vishay Precision Group products. It is the customer’s responsibility to validate that a particular product with the
properties described in the product specification is suitable for use in a particular application.
No license, express, implied, or otherwise, to any intellectual property rights is granted by this document, or by
any conduct of Vishay Precision Group.
The products shown herein are not designed for use in life-saving or life-sustaining applications unless otherwise
expressly indicated. Customers using or selling Vishay Precision Group products not expressly indicated for use
in such applications do so entirely at their own risk and agree to fully indemnify Vishay Precision Group for any
damages arising or resulting from such use or sale. Please contact authorized Vishay Precision Group personnel
to obtain written terms and conditions regarding products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Legal Disclaimer Notice
Disclaimer
Document No.: 63999
Revision: 27-Apr-11