11000 and 12000 series Professional toggle switches Distinctive features Applications These switches are specially manufactured for defence, avionics, space and telecommunications applications. A Approvals and lists CECC 96201-005 CECC 96201-008 * QPL (in Europe) and MUAHAG listed * meeting the requirements of MIL standard (MIL 3950) Robust switches for high specification environments Toggle action on 2-position models giving smooth mechanical operation Plastic material with high insulation resistance Several front panel sealing options Several locking lever options (12000 series) Bright chrome, satin chrome or matt black finish APEM www.apem.com A-63 11000 series Professional toggle switches - threaded bushing O 6,35 (1/4) Specifications ELECTRICAL SPECIFICATIONS A * Max. current/voltage rating with resistive load : - silver contacts (A-AD2-X780) : 2A 250VAC - 4A 125VAC - 4A 30VDC - gold contacts (D) : 200mA 250VAC - 400mA 125VAC * Minimum load : AD2-X780-D contacts : 10mA 50mV, 10A 5V min. * Initial contact resistance : 10 m max. * Insulation resistance : 1.000 M min. at 500VDC * Dielectric strength : 1.000 Vrms 50 Hz min. between terminals 2.000 Vrms 50 Hz min. between poles and between terminals and frame * Contact bounce : 2 ms max. * Electrical life at full load : Peak currents, refer to "Special options". Number of cycles Contacts Max. current/voltage rating 2 positions 3 positions A 2A 250VAC - 4A 125VAC - 4A 30VDC 50.000 50.000 AD2 X780 2A 250VAC - 4A 125 VAC - 4A 30VDC (Gold plating : 100mA 30VDC max.) 20.000 20.000 D 200mA 250VAC - 400mA 125VAC 80.000 50.000 150.000 100.000 Low level or mechanical life MATERIALS * Case : diallylphthalate (DAP) * Actuator : brass, chrome plated * Bushing : brass, nickel plated * Housing : brass, nickel plated * Contacts A : silver AD2 : gold plated silver (2 microns gold) X780 : solid rivet - gold plated silver/nickel alloy D : solid gold rivet X910 : silver/nickel alloy (for peak currents, see "Special options") * Terminal seal : epoxy Note : AD2 and X780 contacts can be used for high level applications. In this case, the gold layer is considered only as a protection against oxidation during storage. GENERAL SPECIFICATIONS * Torque :1,25 Nm (.92 Ft.lb) max. applied between the 2 nuts * Standard panel thickness : 2,5 mm (.098) max. * Operating temperature : -40C to +85C RELIABILITY - RUN-IN TEST Upon request, each individual switch can be submitted to a low level run-in test of 50 or 250 cycles to ensure suitability for special applications requiring a very high level of reliability (military, space, etc.). AGENCY APPROVALS/PREFERENTIAL LISTS CECC 96201-005 CECC 96201-008 QPL (Europe only) MUAHAG Availability : consult factory for details of approved models. Marking : to order switches marked CECC, complete appropriate box of ordering format. Preferential lists do not appear on the switches. Dimensions : first dimensions are in mm while inches are shown as bracketted numbers. Packaging unit : 25 pieces or 50 pieces depending on models. A-64 www.apem.com APEM 11000 series Professional toggle switches - threaded bushing O 6,35 (1/4) Overview 11 SERIES Terminals and bushings Number of poles Solder lug or right angle Straight PC terminals 1 2 3 4 5 6 All models with O 6,35 (1/4) threaded bushing. Single pole Double pole Three pole Four pole Electrical functions 6 9 7 8 Finish A AD2 D Silver Gold plated silver (2 microns) Solid gold rivet See "Special options" for X780 (solid silver/nickel rivet) and X910 (for peak currents). OFF OFF OFF ON ON MOM MOM Blank Solder lug or straight PC W Right angle, horizontal mounting (function 6, SP only) Levers Blank Bright chrome finish G Matt black finish on bushing, actuator and hardware. Contact materials ON ON MOM ON Terminals -13 -26 Approval CECC Standard Cylindrical Sealing Blank Epoxy sealed terminals standard K Front panel sealing by one O-ring and sealing washer Availability : Consult factory for details of approved models. Special options Blank No special requirement X408 Front panel sealing by two O-rings Other : see following pages. Sealing by two O-rings, see X408, "Special options" box. NOTICE : please note that not all combinations of above numbers are available. Refer to the following pages for further information. ABOUT THIS SERIES On the following pages, you will find successively : - model structure of switches - options in the same order as in above chart Sealing boots are available to protect the switches against dust and water. They are presented in section H. Mounting accessories : standard hardware supplied with all models : 2 hex nuts 8 (.314) across flats, 1 locking ring and 1 lockwasher. Standard and special hardware available are presented in section I. APEM www.apem.com A-65 A 11000 series Professional toggle switches - threaded bushing O 6,35 (1/4) * Solder lug, straight PC or right angle terminals * Epoxy sealed terminals standard 2 3 Function 6 1 2 9.50 (.374) 1.20 (.047) 3 2.50 (.098) 1.00 (.039) Other functions MODEL STRUCTURE Shown with standard lever (-13) Keyway 11.30 6.30 (.444) (.248) III III ON ON ON OFF ON MOM OFF MOM ON OFF MOM 0.70 (.027) O3.00 (.118 DIA) 11136 11139 11137 11138 I 14.00 (.551) II 26 1 O6.35-40UNS (1/4-40UNS) 2.50 (.098) 3 2 8.00 (.314) 13.40 (.527) 4.00 (.157) II 1 2 3 I 0.50 (.019) Solder lug terminals - single pole 5.00 (.196) EPOXY Keyway 11.30 6.30 (.444) (.248) III II 26 III ON ON ON OFF ON MOM OFF MOM ON OFF MOM 14.00 (.551) 6 0.70 (.027) O6.35-40UNS (1/4-40UNS) 5.00 (.196) 6.00 (.236) 3 I 14.00 (.551) 2.50 (.098) 4 5 13.40 (.527) 4.00 (.157) 1 2 O3.00 (.118 DIA) 11146 11149 11147 11148 II 3 2 1 I 0.50 (.019) Solder lug terminals - double pole EPOXY Keyway Solder lug terminals - three pole III III 4.30 (.169) A-66 www.apem.com 14.00 (.551) II 20 O6.35-40UNS (1/4-40UNS) 5.00 (.196) 6.00 (.236) 9 4.00 (.157) 6 I 3 2 1 7 8 2.50 (.098) ON ON ON OFF ON MOM OFF MOM ON OFF MOM 4 5 O12.00 (.472 DIA) 11156 11159 11157 11158 II 20.00 (.787) 17.00 (.669) 0.50 (.019) I 11.30 5.70 (.444) (.224) O3.00 (.118 DIA) A 1 5.00 (.196) 1.70 (.066) Keyway EPOXY APEM 11000 series Professional toggle switches - threaded bushing O 6,35 (1/4) Keyway Solder lug terminals - four pole III 4.30 (.169) A O6.35-40UNS (1/4-40UNS) O12.00 (.472 DIA) Keyway 11.30 6.30 (.444) (.248) III 0.70 (.027) ON 14.00 (.551) O6.35-40UNS (1/4-40UNS) O1.60 (.062 DIA) 1.00 (.039) O3.00 (.118 DIA) - III 4.00 (.157) II 26 1 ON 8.00 (.314) 13.40 (.527) I 3 2 4.00 (.157) 9.50 (.374) Keyway II 26 III 0.70 (.027) ON 14.00 (.551) 6 O6.35-40UNS (1/4-40UNS) 9.50 (.374) 7 8 6 9 I II 20 III 4.30 (.169) - ON O6.35-40UNS (1/4-40UNS) O12.00 (.472 DIA) APEM www.apem.com O1.60 (.062 DIA) 1.00 (.039) ON O3.00 (.118 DIA) 11256 14.00 (.551) 4 5 20.00 (.787) 17.00 (.669) 6.00 (.236) III EPOXY 4.00 (.157) II 4.00 (.157) 3 2 1 II 11.30 5.70 (.444) (.224) 0.50 (.019) Keyway Straight PC terminals - three pole O1.60 (.062 DIA) 6.00 (.236) 3 I 6.00 (.236) 4 5 14.00 (.551) 4.00 (.157) 1 2 13.40 (.527) 1.00 (.039) - 11.30 6.30 (.444) (.248) III O3.00 (.118 DIA) ON II 0.50 (.019) II 3 2 1 Straight PC terminals - double pole 11246 EPOXY 6.00 (.236) 11236 EPOXY 0.50 (.019) II 5.00 (.196) 1 2 3 Straight PC terminals - single pole 14.00 (.551) II 20 6.00 (.236) 12 4.00 (.157) 9 I 2.50 (.098) 10 11 0.50 (.019) 7 8 ON ON ON OFF ON MOM OFF MOM ON OFF MOM II 26.00 (1.023) III O3.00 (.118 DIA) 11166 11169 11167 11168 II 17.00 (.669) 3 2 1 II 11.30 5.70 (.444) (.224) 9.50 (.374) 4.00 (.157) EPOXY A-67 11000 series Professional toggle switches - threaded bushing O 6,35 (1/4) Keyway 10 11 9 12 I II 20 III 14.00 (.551) 7 8 ON O6.35-40UNS (1/4-40UNS) O1.60 (.062 DIA) O12.00 (.472 DIA) 6.00 (.236) A - O3.00 (.118 DIA) ON 11266 1.00 (.039) 4.30 (.169) 6.00 (.236) III 26.00 (1.023) 4.00 (.157) II 17.00 (.669) 0.50 (.019) II 11.30 5.70 (.444) (.224) 3 2 1 Straight PC terminals - four pole 5.00 (.196) 14.00 (.551) 3 1.10 (.043) ON 1.30 (.051) III O1.60 (.062 DIA) 5.08 (.200) EPOXY 0.40 (.015) 10.60 (.417) 1.00 (.039) 9.27 (.364) 9.27 (.364) O6.35-40UNS (1/4-40UNS) 4.00 (.157) O3.00 (.118 DIA) - II 26 4.40 (.173) ON I 8.00 (.314) 4.00 (.157) III 3 2 1 11136W 13.80 (.543) 2 II EPOXY 1 I 11.30 5.90 (.444) (.232) 4.00 (.157) 0.50 (.019) Keyway Right angle terminals - horizontal - single pole 9.50 (.374) 4.00 (.157) Models with straight PC terminals are also available with 3,5 mm (.138) short terminals, functions 6, 9, 7 and 8. On request. PANEL CUT-OUT 5.20 (.204) Standard A-68 O2.20 (.086 DIA) O6.50 (.255 DIA) O6.50 (.255 DIA) 2.70 (.106) 1.10 (.043) O6.50 (.255 DIA) With K sealing option 2.70 (.106) With X408 sealing option www.apem.com APEM 11000 series Professional toggle switches - threaded bushing O 6,35 (1/4) CONTACT MATERIALS A AD2 D Silver Gold plated silver (2 micron gold) Solid gold rivet A See "Special options" for contacts X780 (solid silver/nickel rivet) and contacts X910 (for peak currents). FINISH Blank G Bright chrome finish Matt black finish on bushing, lever and hardware. Other finish, consult factory. SEALING 2 2.30 (.090) O10.60 (.417 DIA) O11.80 (.464 DIA) 5.80 (.228) O6.40 (.251 DIA) Not available on 11000W model. 1 1.5Maxi (.104 MAX) Epoxy sealed terminals are standard. Blank No sealing except standard K Front panel sealing by O-ring and sealing washer. Protects the switch against water and dust. Panel seal withstands 1 bar pressure and remains sealed even when switch is operated. O-ring Sealing washer Sealing by two O-rings, see X408 under "Special options". Sealing boots : see section H. LEVERS -13 Standard APEM 9.00 (.354) 7.00 (.275) O2.00 (.078 DIA) 11.30 (.444) 7.00 (.275) O3.00 (.118 DIA) -26 Cylindrical www.apem.com A-69 11000 series Professional toggle switches - threaded bushing O 6,35 (1/4) SPECIAL OPTIONS 5.50 (.216) A 1 Front panel sealing by two O-rings. Flatted bushing for precise orientation. Protects the switch against water and dust. Panel seal withstands 1 bar pressure and remains sealed even when switch is operated. 4.00 Maxi (.157 MAX) X408 Not available on 11000W model. X408 X780 Solid rivet, gold plated silver/nickel alloy X910 Switches for peak currents Flat O-rings Peak current up to 80A (1 ms) 60VDC - single/double pole Single pole 11136 X910 ON - ON Double pole 11146 X910 ON - ON * Contacts : solid rivet - silver/nickel alloy (AgNi) * Max. current/voltage rating : 3/80A (1 ms) 60VDC - 10.000 cycles 2/30A 250VAC - 10.000 cycles * Further specifications and dimensions : see previous pages * General information on peak currents : see end of catalogue. AGENCY APPROVALS CECC CECC 96201-005 (high level - contacts X780) CECC 96201-008 (low level - contacts AD2 or D) Availability : consult factory for details of approved models. Marking : to order switches marked CECC , complete above box with "CECC". Blank : no agency approval required. Preferential lists : see specifications. A-70 www.apem.com APEM 12000 series Professional toggle switches - threaded bushing o 11.9 (15/32) Specifications ELECTRICAL SPECIFICATIONS * Max. current/voltage rating with resistive load : - silver contacts (A-AD2-X780) : 2A 250VAC - 4A 125VAC - 4A 30VDC - gold contacts (D) : 200mA 250VAC - 400mA 125VAC * Minimum load : AD2-X780-D contacts : 10mA 50mV, 10A 5V min. * Initial contact resistance : 10 m max. * Insulation resistance : 1.000 M min. at 500VDC * Dielectric strength : 1.000 Vrms 50 Hz min. between terminals 2.000 Vrms 50 Hz min. between poles and between terminals and frame * Contact bounce : 2 ms max. * Electrical life at full load : Peak currents, refer to "Special options". A Number of cycles Contacts Max. current/voltage rating 2 positions 3 positions A 2A 250VAC - 4A 125VAC - 4A 30VDC 50.000 50.000 AD2 X780 2A 250VAC - 4A 125 VAC - 4A 30VDC (Gold plating : 100mA 30VDC max.) 20.000 20.000 D 200mA 250VAC - 400mA 125VAC 80.000 50.000 150.000 100.000 Low level or mechanical life MATERIALS * Case : diallylphthalate (DAP) * Actuator : brass, chrome plated * Bushing : brass, nickel plated * Housing : brass, nickel plated * Contacts A : silver AD2 : gold plated silver (2 microns gold) X780 : solid rivet - gold plated silver/nickel alloy D : solid gold rivet X910 : silver/nickel alloy (for peak currents, see "Special options") * Terminal seal : epoxy Note : AD2 and X780 contacts can be used for high level applications. In this case, the gold layer is considered only as a protection against oxidation during storage. Tin dipped terminals available, see "Special options". GENERAL SPECIFICATIONS * Torque :1,50 Nm (1.10 Ft.lb) max. applied between the 2 nuts * Standard panel thickness : 4,5 mm (.177) max. * Operating temperature : -40C to +85C RELIABILITY - RUN-IN TEST Upon request, each individual switch can be submitted to a low level run-in test of 50 or 250 cycles to ensure suitability for special applications requiring a very high level of reliability (military, space, etc.). AGENCY APPROVALS/PREFERENTIAL LISTS CECC 96201-005 CECC 96201-008 QPL (Europe only) MUAHAG Designed to MIL specifications Availability : consult factory for details of approved models. Marking : to order switches marked CECC, complete appropriate box of ordering format. Preferential lists do not appear on the switches. Dimensions : first dimensions are in mm while inches are shown as bracketted numbers. Packaging unit : 2 pole models : 25 pieces - 3 & 4 pole models : 20 pieces. APEM www.apem.com A-71 12000 series Professional toggle switches - threaded bushing o 11.9 (15/32) Overview 12 Terminals and bushings SERIES 1 2 A Solder lug terminals Straight PC terminals All models with threaded bushing O 11,9 (15/32). Bushing O 15 (.590), see X822 under "Special options". Number of poles 4 5 6 Momentary for function 4 Electrical functions Double pole Three pole Four pole 6 9 7 8 5 ON ON MOM ON - OFF OFF OFF ON ON ON MOM MOM MOM 4 ON ON ON ON ON MOM MOM ON MOM 1R ON ON MOM 2R MOM ON MOM Leave blank for other functions. Function 4 . Must not have blank in "momentary" box. Finish Fluorescent tip Blank Bright chrome finish G Matt black finish on bushing, actuator and hardware. Blank None 0.38 White fluorescent tip to lever A AD2 D Silver Silver, gold plated (2 micron gold)) Solid gold rivet See "Special options" for X780 (solid silver/nickel rivet) and X910 (for peak currents). Blank No special requirement X408 Front panel sealing by two O-rings X822 Bushing O 15 (.590) Available with matt black finish (G) only. Satin chrome finish, see "Special options". Contact materials Special options Other : see foll. pages. Sealing Blank Epoxy sealed terminals standard K Front panel sealing by one O-ring and sealing washer Sealing by two O-rings, see X408, "Special options" box. Levers Standard lever Short lever -13 -12 Locking levers Approvals CECC Availability : Consult factory for details of approved models. -1V 1 locked position -2V 2 locked positions -3V 3 locked positions Other, consult factory. NOTICE : please note that not all combinations of above numbers are available. Refer to the following pages for further information. ABOUT THIS SERIES On the following pages, you will find successively : - model structure of switches - options in the same order as in above chart Sealing boots are available to protect the switches against dust and water. They are presented in section H. Mounting accessories : standard hardware supplied with all models : 2 hex nuts 14 (.551) across flats and 1 locking ring. Standard and special hardware available are presented in section I. Security caps are available to prevent inadvertent lever operation. They are presented in section I. A-72 www.apem.com APEM 12000 series Professional toggle switches - threaded bushing o 11.9 (15/32) Solder lug terminals : 12100 1 2 3 Function 6 1 2 3 Other functions Function 6 24 Functions 9, 7, 8, 4 20 Function 5 12 1.20 (.047) 9.50 (.374) Typical angle of throw (A) 5.00 (.196) 1.70 (.066) * Epoxy sealed terminals standard Keyway 2.50 (.098) 1.00 (.039) A MODEL STRUCTURE Shown with standard lever (-13) Keyway III 14.00 (.551) 1.00 (.039) O18.20 (.716 DIA) 5.00 (.196) 6.00 (.236) ON ON MOM MOM ON MOM MOM MOM II A 4.00 (.157) 6 1 3 I 2 4 5 2.50 (.098) OFF OFF OFF ON ON ON ON 1 2 13.70 (.539) 0.50 (.019) ON ON MOM ON ON ON MOM - III 10.90 (.429) O6.00 (.236 DIA) 12146 12149 12147 12148 12144* 12144 1R* 12144 2R* 12145 II O11.90-32UNS (15/32-32UNS) I 17.30 (.681) 3 Solder lug terminals - double pole EPOXY * Function 4 : SP in DP case - connections, see end of catalogue. Keyway Solder lug terminals - three pole 13.70 (.539) III 14.00 (.551) II A 12 II A III OFF OFF OFF ON ON ON ON ON MOM MOM ON MOM MOM O6.00 (.236 DIA) ON ON MOM ON ON ON MOM O11.90-32UNS (15/32-32UNS) 1.00 (.039) 12166 12169 12167 12168 12164* 12164 1R* 12164 2R* * Function 4 : DP in 4P case - connections, see end of catalogue. APEM www.apem.com 14.00 (.551) 9 I 5.00 (.196) O18.20 (.716 DIA) 6.00 (.236) 10 11 26.00 (1.023) 2.50 (.098) 7 8 13.70 (.539) 1 III 10.90 (.429) 2 II 17.30 (.681) EPOXY 3 I 5.00 (.196) 0.50 (.019) Keyway Solder lug terminals - four pole O18.20 (.716 DIA) 6.00 (.236) O6.00 (.236 DIA) O11.90-32UNS (15/32-32UNS) ON ON ON OFF ON MOM OFF MOM ON OFF MOM 2.50 (.098) III 4.00 (.157) 9 4.00 (.157) 6 I 1 7 8 2 4 5 1.00 (.039) 12156 12159 12157 12158 20.00 (.787) 3 II 10.90 (.429) 0.50 (.019) I 17.30 (.681) EPOXY A-73 12000 series Professional toggle switches - threaded bushing o 11.9 (15/32) Straight PC terminals : 12200 6 II A 14.00 (.551) 3 I III ON 1.00 (.039) 6 9 I II A 14.00 (.551) 7 8 20.00 (.787) 2 1 4 5 13.70 (.539) III ON 1.00 (.039) O18.20 (.716 DIA) O1.60 (.062 DIA) 9 12 I II A III ON 6.00 (.236) 14.00 (.551) 10 11 26.00 (1.023) 2 1 7 8 13.70 (.539) 1.00 (.039) O18.20 (.716 DIA) 6.00 (.236) O1.60 (.062 DIA) 6.00 (.236) O6.00 (.236 DIA) O11.90-32UNS (15/32-32UNS) 1.00 (.039) - III 10.90 (.429) 4.00 (.157) ON 12266 II 17.30 (.681) 4.00 (.157) EPOXY 3 I 9.50 (.374) 0.50 (.019) Keyway Straight PC terminals - four pole 6.00 (.236) O6.00 (.236 DIA) O11.90-32UNS (15/32-32UNS) 1.00 (.039) - III 10.90 (.429) 4.00 (.157) EPOXY 4.00 (.157) ON II 17.30 (.681) O1.60 (.062 DIA) 3 I 9.50 (.374) 0.50 (.019) Keyway Straight PC terminals - three pole 12256 O6.00 (.236 DIA) O11.90-32UNS (15/32-32UNS) 1.00 (.039) A O18.20 (.716 DIA) 6.00 (.236) 4 5 2 1 1 2 6.00 (.236) - III 13.70 (.539) 0.50 (.019) ON 12246 II 10.90 (.429) 3 I 17.30 (.681) 4.00 (.157) Keyway Straight PC terminals - double pole 9.50 (.374) EPOXY 4.00 (.157) Models with straight PC terminals are also available with 3,5 mm (.138) short terminals, functions 6, 9, 7 and 8. On request. PANEL CUT-OUT O3.50 (.137 DIA) O12.00 (.472 DIA) O12.00 (.472 DIA) 1.70 (.066) O12.50 (.492 DIA) 9.60 (.377) Standard A-74 5.10 (.200) 5.10 (.200) With K sealing option With X408 sealing option www.apem.com APEM 12000 series Professional toggle switches - threaded bushing o 11.9 (15/32) CONTACT MATERIALS A AD2 D Silver Silver, gold plated (2 micron gold) Solid gold rivet (except functions 4 and 5) A See "Special options" for contacts X780 (solid silver/nickel rivet) and contacts X910 (for peak currents). FINISH Blank G Bright chrome finish Matt black finish on bushing, lever and hardware. For satin chrome finish, see "Special options". Epoxy sealed terminals are standard. Blank No sealing except standard. K Front panel sealing by one O-ring and sealing washer. Protects the switch against water and dust. Panel seal withstands 1 bar pressure and remains sealed even when switch is operated. Sealing by two O-rings, see X408 under "Special options". Sealing boots : see section H. 2 O-ring 1 3.00 (.118) 4 Maxi (.157 max) SEALING 2 1 Sealing washer FLUORESCENT TIP Standard lever Blank None 0.38 White fluorescent tip. Becomes luminous when submitted to ultra-violet rays. Locking lever Available with matt black finish (option G) only. APEM www.apem.com A-75 12000 series Professional toggle switches - threaded bushing o 11.9 (15/32) ACTUATORS Dash compulsory before lever code. Levers A O6.00 (.236 DIA) Security caps : see section I. 11.90 (.468) 11.90 (.468) 11.80 (.464) 17.30 (.681) O5.00 (.196 DIA) -13 Standard -12 Short lever Locking levers Keyway O7.00 (.275) 11.90 (.468) 11.90 (.468) 11.90 (.468) 19.40 (.763) 19.40 (.763) 20.60 (.811) O (.2757.00 DIA) O (.2757.00 DIA) -1V -2V -3V 1 locked position (function 6) Typical angle of throw : 26 2 locked positions (function 6) Typical angle of throw : 26 3 locked positions (functions 9 and 4) Typical angle of throw : 20 Consult factory for other locking lever options. SPECIAL OPTIONS Blank No special requirement. 1 Front panel sealing by two O-rings. Flatted bushing for precise orientation. Panel thickness : 8 mm (.314) max., 3 mm (.118) min. Protects the switch against water and dust. Panel seal withstands 1 bar pressure and remains sealed even when switch is operated. 10.40 (.409) X408 Flat X545 A-76 O-rings Lever, bushing, housing, nuts and washers with satin chrome finish. www.apem.com APEM 12000 series Professional toggle switches - threaded bushing o 11.9 (15/32) SPECIAL OPTIONS (continued) O15 X 100 SI (.590 DIA X 100 IS) Threaded bushing O 15 (.590), with double flat Not available with function 5 or locking levers. Includes front panel sealing and X780 contact material. 10.40 (.409) X822 12.70 (.500) 1 6.5 Maxi (.255 Max) Solid rivet - gold plated silver/nickel alloy contacts Not available with function 5. X822 Flat O-rings X910 O15.20 (.598 DIA) 13.00 (.511) X780 A Switches for peak currents Peak current up to 80A (1 ms) 60VDC - double pole 12146 X910 ON - ON * Contacts : solid rivet - silver/nickel alloy (AgNi) * Max. current/voltage rating : 3/80A (1 ms) 60VDC - 10.000 cycles 2/30A 250VAC - 10.000 cycles * Further specifications and dimensions : see previous pages * General information on peak currents : see end of catalogue. AGENCY APPROVAL CECC CECC 96201-005 (high level - contacts X780) CECC 96201-008 (low level - contacts AD2 or D) Availability : consult factory for details of approved models. Marking : to order switches marked CECC, complete above box with "CECC". Blank : no agency approval required. Preferential lists : see specifications. APEM www.apem.com A-77