SPECIFICATION CONTROL DRAWING Product Revisions Part Names D-150-0168 A D-150-0169 B D-150-0170 B D-150-0174 A D-150-0175 D D-150-0176 B D-150-0177 B D-150-0178 A D-150-0179 A D-150-0180 A D-150-0181 B Primary No. 1 1 1 2 2 2 2 3/4 3/4 3/4 3/4 AWG Range 26-20 20-16 16-12 26-20 18-16 14 12 26-20 22-20 18-16 14-12 Color Code Red Blue Yellow Red Blue Yellow Yellow Red Red Blue Yellow L Max 80.52 (3.170) 80.52 (3.170) 80.52 (3.170) 105.92 (4.170) 105.92 (4.170) 105.92 (4.170) 105.92 (4.170) 105.92 (4.170) 105.92 (4.170) 105.92 (4.170) 105.92 (4.170) Product Dimensions oD1 A2.54 (0.100) 50.30 (1.970) 3.00 (0.118) 50.30 (1.970) 4.00 (0.157) 50.30 (1.970) 5.00 (0.197) 74.93 (2.950) 4.00 (0.157) 74.93 (2.950) 5.00 (0.197) 74.93 (2.950) 6.00 (0.236) 74.93 (2.950) 9.04 (0.356) 74.93 (2.950) 4.00 (0.157) 74.93 (2.950) 5.00 (0.197) 74.93 (2.950) 6.00 (0.236) 74.93 (2.950) 9.04 (0.356) oD2 1.14 (0.045) 1.63 (0.064) 2.46 (0.097) 1.14 (0.045) 1.63 (0.064) 2.46 (0.097) 2.46 (0.097) 1.14 (0.045) 1.14 (0.045) 1.63 (0.064) 2.46 (0.097) oD3 2.79 (0.110) 4.00 (0.157) 4.32 (0.170) 2.16 (0.085) 2.79 (0.110) 4.32 (0.170) 4.32 (0.170) 2.16 (0.085) 2.16 (0.085) 2.79 (0.110) 4.32 (0.170) MATERIALS 1. SOLDERSHIELD SPLICE SLEEVE: Heat-shrinkable, radiation cross-linked modified polyvinylidene fluoride sleeve, containing two environment resistant sealing rings and a solder impregnated, flux-coated copper-wire braid. Transparent blue. SOLDER: TYPE Sn63 per ANSI J-STD-006. FLUX: TYPE ROM1 per ANSI J-STD-004. 2. CRIMP SPLICE (1, 2, OR 4 PER KIT): Tin-plated copper alloy with color code stripe. 3. SEALING SPLICE SLEEVE (1, 2, OR 4 PER KIT): Heat-shrinkable, radiation cross-linked modified polyvinylidene fluoride sleeve, containing two environment resistant sealing rings. Transparent blue. APPLICATION 1. These kits are designed to make an environment-resistant, 1 to 1 in-line splice in shielded single, twisted pair, trio and quad cables having tin or silver-plated conductors and insulations rated for 135C minimum. 2. Temperature rating: -55C to +150C. 3. For installation procedures refer to the applicable sections of Raychem Process Standard RCPS 150-02. Tyco Electronics Corporation 300 Constitution Drive Menlo Park, CA 94025 USA RAYCHEM Unless otherwise specified dimensions are in millimeters. Inches dimensions are in between brackets. Tyco Electronics reserves the right to amend this ANGLES: N/A TOLERANCES: drawing at any time. Users should evaluate the 0.00 N/A suitability of the product for their application. ROUGHNESS IN 0.0 N/A MICRON 0 N/A DRAWN BY: REPLACES: DCR NUMBER: M. FORONDA D000670 D010319 If this document is printed it becomes uncontrolled. Check for the latest revision. TITLE : (1 TO 1 SPLICES-CRIMP) SOLDERSHIELD SPLICE KIT, SHIELDED CABLE DOCUMENT NO.: D-150-0168-0170/0174-0181 DATE: DOC ISSUE: April 25, 2001 PROD. REV. SEE TABLE SCALE: None 9 SIZE: A SHEET: 1 of 1