Solid State Devices, Inc.
14701 Firestone Blvd * La Mira da, Ca 90638
Phone: (562) 404-4474 * Fax: (562) 404-1773
ssdi@ssdi-power.com * www.ssdi-power.com
DESIGNER’S DATA SHEET
FEATURES:
Hermetically Sealed in Glass
Axial Lead Rated at 500 mW
Surface Mount Rated at 800 mW
Available in Axial (L), Round Tab Surface Mount (SM) and
Square Tab Surface Mount (SMS) Versions
Available to TX, TXV, and Space Levels 5/
Available in 10% and 5% Tolerances. For other Voltage
Tolerances, Contact Factory.
NOTE: All specifications are subject to change without notification.
SCD's for these devices should be reviewed by SSDI prior to release.
Maximum Ratings Symbol Value Units
Nominal Zener Voltage VZ 2.4 - 200 V
Zener Current L
SM, SMS IZM 2.2 - 198
3.3 – 297 mA
Continuous Power L
SM, SMS PD 500
800 mW
Operating and Storage Temp. Top,
Tstg -65 to +175 ºC
Thermal Resistance,
Junction to Lead, L=3/8” (for L)
Junction to End Cap (for SM, SMS)
Junction to Ambient (for All)
RθJL
RθJE
RθJA
250
150
300 ºC/W
Part Number/Ordering Information 2/
SZ5 __ __ __ __
└ Screening 5/ __ = Not Screened
TX = TX Level
TXV = TXV
S = S Level
│
│
│
│
└ Package Type 4/
L = Axial Leaded
SM = Surface Mount Round Tab
SMS = Surface Mount Square Tab
│
│
│
│
│
│
│
│
└
Voltage/Family
2.4 thru 200 = 2.4V thru 200V , See Table on Page 2
│
│
│
│
│
│
│
│
│
│
│
└ Voltage Tolerance
A = 10% Voltage Tolerance
B = 5% Voltage Tolerance
SZ5A2.4
thru
SZ5A200
500mW and 800mW
2.4 – 200 VOLTS
ZENER DIODES
DIM MIN. MAX
A .060” .090”
B .120” .200”
C 1.00” ---
D .018” .022”
AXIAL (L) All dimensions are prior to soldering
DIM MIN. MAX.
A .057” .067”
B .130” .146”
C .010” .022”
D Body to Tab Clearance: .001”
ROUND TAB (SM) All dimensions are prior to soldering
DIM MIN. MAX.
A .093” .097”
B .175” .210”
C .023” .027”
D Body to Tab Clearance: .001”
SQUARE TAB (SMS) All dimensions are prior to soldering
DATA SHEET #: Z00002D DOC