211D168X9100B7 - Vishay Presicion Group

211D

www.vishay.com Vishay

Revision: 10-Nov-11 1Document Number: 40111

For technical questions, contact: tantalum@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Type 211D Wet Tantalum Capacitor Array with Tantalum Cased

Tantalum Internal Components for - 55 °C to + 125 °C Operation

FEATURES

Vishay 211D series was designed as an upgrade to the older

and mature 200D and 202D Tantalpak® Capacitor

assemblies. The 211D is constructed using tantalum

capacitors, similar to the Vishay 135D series or the

MIL-PRF-39006/22 or /25 styles. This enables the 211D to

exhibit the improved performance characteristics of the

tantalum-cased capacitors. Capable of withstanding 3.0 V

reverse. The 211D has applicability in new designs when

used for energy storage, filtering and similar functions.

PERFORMANCE CHARACTERISTICS

Operating Temperature: - 55 °C to + 125 °C

Capacitance Tolerance: At 120 Hz, + 25 °C, ± 20 %

Standard: ± 10 % available

DC Leakage Current (DCL maximum):

At + 25 °C: Leakage current shall not exceed the values

listed in the Standard Ratings table.

Life Test: Capacitors shall withstand 2000 h at a

temperature of + 85 °C or + 125 °C at the rated DC working

voltage. Following the life test:

1. DCL shall not exceed the original requirement

2. ESR shall not exceed the original requirement

3. Capacitance shall not change more than ± 10 %

ORDERING INFORMATION

211D 228 X 030 A5

MODEL CAPACITANCE CAPACITANCE

TOLERANCE

DC VOLTAGE RATING

AT + 85 °C

CASE CODE

This is expressed in

picofarads. The first two

digits are significant

figures. The third is the

number of zeros.

X0 = ± 20 %

X9 = ± 10 %

This is expressed in volts.

To complete the three digit

block, zeros precede the

voltage rating. A decimal

point is indicated by an “R”

(6R3 = 6.3 V).

See dimensional

configurations

DIMENSIONS

SERIES “A” CASE SERIES “B” CASE CASE CODE H

CASE HEIGHT

A1 1.062 [26.97]

A2 1.375 [34.93]

A3 1.625 [41.28]

A4 2.000 [50.60]

A5 2.500 [63.50]

B1 1.500 [38.10]

B2 1.875 [47.63]

B3 2.250 [57.15]

B4 2.625 [66.68]

B5 3.000 [76.20]

B6 3.375 [85.73]

B7 3.750 [95.25]

0.720 ± 0.031

1.305 ± 0.031

1.275 ± 0.015

0.281 ± 0.031

0.625 ± 0.015

H ± 0.031

0.281 ± 0.031

0.750 ± 0.015

H ± 0.062

1.000 ± 0.062

1.593 ± 0.062

211D

www.vishay.com Vishay

Revision: 10-Nov-11 2Document Number: 40111

For technical questions, contact: tantalum@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

STANDARD RATINGS

CAPACITANCE

(μF)

CASE

CODE PART NUMBER

MAXIMUM

ESR

AT + 25 °C

()

MAXIMUM

IMPEDANCE

AT - 55 °C

()

DCL

AT + 25 °C

(μA)

DCL

AT + 85 °C/

+ 125 °C

(μA)

MAXIMUM

RMS RIPPLE

40 kHz

(A)

10 VDC AT + 85 °C; 6.7 VDC AT + 125 °C

4500 B1 211D458X010B1 0.150 3.8 24 96 11

7500 B3 211D758X010B3 0.090 2.3 40 160 19

10 000 B5 211D109X010B5 0.063 1.64 56 224 26

14 000 B7 211D149X010B7 0.049 1.28 72 288 34

30 VDC AT + 85 °C; 20 VDC AT + 125 °C

1200 A2 211D128X030A2 0.31 3.9 21 63 7.8

1300 A4 211D138X030A4 0.42 6.0 18 96 5.8

1800 A5 211D188X030A5 0.45 6.3 32 128 4.8

1800 B1 211D188X930B1 0.23 4.2 48 192 9.4

50 VDC AT + 85 °C; 35 VDC AT + 125 °C

700 A4 211D707X050A4 0.23 8.2 24 144 5.8

1000 A5 211D108X050A5 0.51 7.3 27 108 4.6

3300 B5 211D338X050B5 0.150 2.2 90 360 15

5200 B6 211D528X050B6 0.096 1.38 144 576 24

5900 B7 211D598X050B7 0.085 1.22 162 648 27

75 VDC AT + 85 °C; 50 VDC AT + 125 °C

120 A2 211D127X075A2 0.99 20 6 36 3.0

200 A4 211D207X075A4 0.67 15.0 6 60 2.4

220 A5 211D227X075A5 0.49 10.0 12 72 6.0

400 A3 211D407X075A3 0.50 13.0 20 120 4.0

480 A4 211D487X075A4 0.41 10.5 24 144 4.8

660 A5 211D667X075A5 0.60 8.0 30 120 4.3

880 B2 211D887X075B2 0.180 3.6 72 288 12

1100 B3 211D118X075B3 0.150 2.9 90 360 15

4000 B7 211D408X075B7 0.100 1.33 180 720 26

100 VDC AT + 85 °C; 70 VDC AT + 125 °C

540 A5 211D547X0100A5 0.25 5.7 70 336 15

1200 B3 211D128X0100B3 0.28 3.0 120 480 16

1600 B7 211D168X0100B7 0.085 1.66 162 648 26

125 VDC AT + 85 °C; 80 VDC AT + 125 °C

380 A5 211D387X0125A5 0.25 6.4 70 336 13

1100 B5 211D118X0125B5 0.20 2.3 168 672 21

1400 B7 211D148X0125B7 0.160 1.78 216 864 27

150 VDC AT + 85 °C; 100 VDC AT + 125 °C

70 A2 211D706X0150A2 1.90 45 4 40 2.9

550 B3 211D118X0150B3 0.32 4.8 50 200 7

Note

• Other ratings are available. Contact factory with your specific requirements.

Document Number: 91000 www.vishay.com

Revision: 11-Mar-11 1

Disclaimer

Legal Disclaimer Notice

Vishay

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical

requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements

about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular

product with the properties described in the product specification is suitable for use in a particular application. Parameters

provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All

operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree

to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and

damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay

or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to

obtain written terms and conditions regarding products designed for such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by

any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.