CC7, CCB Vishay Electro-Films CHIP RESISTORS Thin Film Resistors on Alumina, User Trimmable FEATURES * Wire bondable Product may not be to scale * Small single chip size CC7 - 0.030 inches square CCB - 0.050 inches square The CC7 and CCB series resistor chips offer the combination of user trimmability, low shunt capacitance and excellent stability. The CC7 and CCB can be specified as either a single RT value resistor, as two resistors with a center tap feature (1:1 ratio or custom) ratio or user trimmable. The CC7 and CCBs a six bonding pads allows the user increased layout flexibility. The CC7 and CCBs are manufactured using Vishay Electro-Films (EFI) sophisticated thin film equipment and manufacturing technology. They are 100 % electrically tested and visually inspected to MIL-STD-883. * Alumina substrate * Low stray capacitance: < 0.2 pF * Resistance range RT: 100 to 20 k for CC7 Resistance range RT: 100 to 50 k for CCB * Resistor material: Nichrome * User trimmable APPLICATIONS Vishay EFI CC7 and CCB chip resistors provide excellent high frequency response and are ideally suited for prototyping. Typical application areas are: * Amplifiers * Oscillators * Attenuators * Couplers * Filters Recommended for hermetic environments where die is not exposed to moisture TEMPERATURE COEFFICIENT OF RESISTANCE, VALUES AND TOLERANCES PROCESS CODE Tightest Standard Tolerance Available 0.1 % 100 200 CC7 CCB 10 ppm/C CLASS H* CLASS K* CLASS H* CLASS K* 25 ppm/C 219 223 219 223 50 ppm/C 220 224 220 224 100 ppm/C 221 225 221 225 222 226 222 226 50 k 1 k *MIL-PRF-38534 inspection criteria RA user trimmable 50 % above RT value specified in P/N STANDARD ELECTRICAL SPECIFICATIONS PARAMETER Noise, MIL-STD-202, Method 308 - 20 dB typ. Stability, 1000 h, + 125 C at Rated Power + 0.1 % max. R/R Operating Temperature Range - 55 C to + 125 C Thermal shock, MIL-STD-202, Method 107, Test Condition F + 0.25 % max. R/R High Temperature Exposure, + 150 C, 100 h + 0.25 % max. R/R Dielectric Voltage Breakdown 400 V 1012 min. Insulation Resistance Operating Voltage 100 V max. 50 mW max. (30 mil) 100 mW max. (50 mil) DC Power Rating at 125 C 5 x Rated Power Short-Time Overload, + 25 C, 5 s + 0.25 % max. R/R Note: Performance characteristics are not guaranteed once user trimmed www.vishay.com 84 For technical questions contact: efi@vishay.com Document Number: 61012 Revision: 11-Mar-08 CC7, CCB Thin Film Resistors on Alumina, User Trimmable Vishay Electro-Films DIMENSIONS in inches CC7 0.005 CCB 0.030 0.050 0.0075 0.005 0.005 0.030 0.016 0.050 0.035 0.005 0.005 SCHEMATIC RT = RA + RB RA RB MECHANICAL SPECIFICATIONS in inches PARAMETER 0.030 x 0.030 0.003 (0.76 x 0.76 0.08 mm) 0.050 x 0.050 0.003 (1.27 x 1.27 0.08 mm) Chip Size Chip Thickness 0.010 0.002 (0.25 0.03 mm) Chip Substrate Material 99.6 % alumina, 2 - 4 microinch finish Resistor Material Nichrome Bonding Pad Size 0.005 x 0.005 (0.12 x 0.12 mm) minimum Number of Pads 6 Pad Material 25 kA minimum gold standard Backing Options: None Gold back for solder die attach Consult Application Engineer ORDERING INFORMATION Example: 100 % visualled, RT = 500, 10 %, 50 ppm/C TCR, gold pads, class H vixual inspection, 30 mil size, RA user trim. Standard user trim versions will be supplied with RA untrimmed For custom RA, RB combinations consult Application Engineer W INSPECTION/ PACKAGING W = 100 % visually inspected parts X = Sample, visually inspected parts loaded in matrix trays (4 % AQL) Document Number: 61012 Revision: 11-Mar-08 CC7 PRODUCT FAMILY CC7 CCB 221 PROCESS CODE See Process Code table 5000 RESISTANCE VALUE Use first 4 digits significant digits of the resistance (RT) A MULTIPLIER CODE B = 0.01 A = 0.1 0=1 1 = 10 K TOLERANCE CODE B = 0.1 % D = 0.5 % F = 1.0 % G = 2.0 % H = 2.5 % J = 5.0 % K = 10 % www.vishay.com 85 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1