THIS DRAWING AND DESIGN HEREON CON STITUTES A PROPRIETARY DESIGN OF PACKARD ELECTRIC DIVISION AND [S NOT TO BE OUPLICATED OR REPRODUCED WITH- CON ORITY OF PACKARD ELECTRIC PACKARD ELECTRIC DIVISION GENERAL MOTORS CORPORATION WARREN, OHIO ISS IS Wh DO NOT SCALE pe@- 24,5 REF, -_> pa 17.0 REF. = HIS WIDTH MUST BE MAINTAINED FOR INIMUM DISTANCE OF 12.5 FROM NED EDGE OF THE BLADE. j | > 4.8020.08 ( i N CONDUCTOR WINGS FOR 0.8 0.5 MM? CABLE INSULATION WINGS FOR 3.12 MAX. INSULATION DIA. CABLE EH PL ASM. DIMENSIONING POINT 3.220.4 .? Loon +0.035 .? THIS THICKNESS MUST BE MAINTAINED FOR A MINIMUM DISTANCE OF 12.5 FROM THE COINED EDGE OF THE BLADE. NOTES~ |. MATING CONNECTOR - {2052851 OR EQUIVALENT. 2. MATING TERMINAL 12052363 OR EQUIVALENT. DATE SYM REVISION RECORD AUTH jDR | CK iZNO85 PART NO. WAS PEOOI750 & RELEASED 85005 |GP|DKS |7MR86 17.0 REF WAS 17,0 104714 DJT| TM 22N088 REVISED PART NAME & OIM'S (3 PLCS.) |] 23331 JAP {SAR DRAWING NO. 1205 9904 cosp2549 C THIRD ANGLE PROJECTION E Ne} Q--<t LESS ED TOLERANCE UNLESS OTHERWISE SPECIFIED DECIMAL: ONE PLACE + 0.3 TWO PLACE : 4.15 ANGULAR + 2 DATE OBMY85 SCALE NONE OR. 6. PHILLIPS I2NO85 CD.T.MP.M.12059904.0D CK. D.STEELE DATE |2DE85 REFERENCE NO. [2059906 "E" SIZE APPR. R.PARKHURST |OATE |GDE85 APPR-T CUNNINGHA MJATE IGDE85 MATERIAL SPEC. 0.38 THK. CDA 42500 TIN BRASS TIN PLATED MATTE FINISH NAME TERM M M/P 480 SI PART NO. 1205 9904 C OUTLINE DRAWING SIZE PACKARD ELECTRIC