FTLX4213C3C205 - Finisar Corporation

F i n i s a r

Product Specification

+3200 ps/nm (~200km) DWDM XFP Optical Transceiver

FTLX4213x3xxxx

PRODUCT FEATURES

• Supports 10.7Gb/s to 11.35Gb/s

• -500 to +3200 ps/nm Dispersion

Tolerance (~200km reach without

dispersion compensation)

• Supports ITU C & L-Band

DWDM channels

• Supports 8x50GHz tuning range

• Temperature-stabilized DWDM

CMLTM transmitter

• Temperature range: 0°C to 70°C

• RoHS-6 Compliant (lead-free)

• Power dissipation <4.0W

• Adjustable receiver threshold

APPLICATIONS

• Amplified DWDM 10Gb/s SONET/SDH

w/FEC

• Amplified DWDM 10Gb/s Ethernet

and 10Gb/s Fibre Channel w/FEC

Finisar’s FTLX4213x3xxxx Small Form Factor 10Gb/s (XFP) transceiver complies with

the XFP Multi-Source Agreement (MSA) Specification1. It supports amplified DWDM

10Gb/s SONET/SDH +FEC,10 Gigabit Ethernet +FEC, and 10 Gigabit Fibre Channel

+FEC applications over ~200km of fiber without dispersion compensation. The standard

product supports narrow tunability on the C- and L-Band channels with 50GHz spacing.

Digital diagnostics functions are available via a 2-wire serial interface, as specified in the

XFP MSA. The transceiver is RoHS compliant and lead free per Directive 2002/95/EC3,

and Finisar Application Note AN-20384.

PRODUCT SELECTION

FTLX4213x3xxxx

x: tuning range

xxxx: ITU-T Channel#

(see next page)

FTLX4213x3xxxx 3200ps/nm DWDM XFP Product Specification – December 2010 F i n i s a r

C-Band, 8x50GHz XFPs (FTLX4213C3Cxxx)

L-Band, 2x200GHz XFPs (FTLX4213J3Lxxx)

Note* Æ Please contact your Finisar representative for any requirements not

supported by the above channel plan.

FTLX4213x3xxxx 3200ps/nm DWDM XFP Product Specification – December 2010 F i n i s a r

I. Pin Descriptions

Pin Logic Symbol Name/Description Ref.

1 GND Module Ground 1

2 VEE5 Optional –5.2 Power Supply – Not required

3 LVTTL-I Mod-Desel Module De-select; When held low allows the module to

respond to 2-wire serial interface commands

4 LVTTL-O

Interrupt Interrupt (bar); Indi cat es presence of an important condition

which can be read over the serial 2-wire interface 2

5 LVTTL-I TX_DIS Transmitter Disable; Transmitter laser source turned off

6 VCC5 +5 Power Supply

7 GND Module Ground 1

8 VCC3 +3.3V Power Supply

9 VCC3 +3.3V Power Supply

10 LVTTL-I SCL Serial 2-wire interface clock 2

11 LVTTL-

I/O SDA Serial 2-wire interface data line 2

12 LVTTL-O Mod_Abs Module Absent; Indicates module is not present. Grounded

in the module. 2

13 LVTTL-O Mod_NR Module Not Ready; Finisar defines it as a logical OR

between RX_LOS and Loss of Lock in TX/RX. 2

14 LVTTL-O RX_LOS Receiver Loss of Signal indicator 2

15 GND Module Ground 1

16 GND Module Ground 1

17 CML-O RD- Receiver inverted data output

18 CML-O RD+ Receiver non-inverted data output

19 GND Module Ground 1

20 VCC2 +1.8V Power Su ppl y – Not required

21 LVTTL-I P_Down/RST Power Down; When high, places the module in the low

power stand-by mode and on the falling edge of P_Down

initiates a module reset

Reset; The falling edge initiates a complete reset of the

module including the 2-wire serial interface, equivalent to a

power cycle.

22 VCC2 +1.8V Power Su ppl y – Not required

23 GND Module Ground 1

24 PECL-I RefCLK+ Reference Clock non-inverted input, AC coupled on the

host board – Not required

25 PECL-I RefCLK- Reference Clock inverted input, AC coupled on the host

board – Not required

26 GND Module Ground 1

27 GND Module Ground 1

28 CML-I TD- Transmitter inverted data input

29 CML-I TD+ Transmitter non-inverted data input

30 GND Module Ground 1

Notes:

1. Module circuit ground is isolated from module chassis ground within the module.

2. Open coll ector; should be pul l ed up wi t h 4. 7 k – 10 k ohms on host board to a volta ge between 3.15V

and 3.6V.

FTLX4213x3xxxx 3200ps/nm DWDM XFP Product Specification – December 2010 F i n i s a r

Diagram of Host Board Connector Block Pin Numbers and Names

II. Absolute Maximum Ratings

Parameter Symbol Min Typ Max Unit Ref.

Maximum Supply Voltage #1 Vcc3 -0.5 4.0 V

Maximum Supply Voltage #2 Vcc5 -0.5 6.0 V

Sto rage Temperature TS -40 85

°C

Case Operating Temperature TOP 0 70

°C

Receiver Damage Threshold PRdm

g

+5 dBm

FTLX4213x3xxxx 3200ps/nm DWDM XFP Product Specification – December 2010 F i n i s a r

III. Electrical Characteristics (TOP = 0 to 70 °C, VCC5 = 4.75 to 5.25 Volts)

Parameter Symbol Min Typ Max Unit Ref.

Supply Volta g e #1 Vcc5 4.75 5.25 V

Supply Volta g e #2 Vcc3 3.13 3.46 V

Supply Current – Vcc5 supply Icc5 500 mA

Supply Current – Vcc3 supply Icc3 750 mA

Module total power P 4.0 W 1

Transmitter

Input differential impedance Rin 100 Ω 2

Differential data input swing Vin,pp 120 820 mV

Transmit Disable Voltage VD2.0 Vcc V 3

Transmit Enable Voltage VEN GND GND+ 0.8 V

Transmit Disable Assert Time 10 us

Receiver

Differential data output swing Vout,pp 340 650 850 mV 4

Data output rise time t

r

38 ps 5

Data output fall time tf 38 ps 5

LOS Fault VLOS faul

t

Vcc – 0.5 VccHOST V 6

LOS Normal VLOS nor

m

GND GND+0.5 V 6

Power Supply Rejection PSR See Note 7 below 7

Notes:

1. Maximum total power value is specified across the full temperature and voltage range.

2. After internal AC coupling.

3. Or open circuit.

4. Into 100 ohms differential termination.

5. 20 – 80 %

6. Loss Of Signal is open collector to be pulled up with a 4.7k – 10kohm resistor to 3.15 – 3.6V. Logic 0

indicates normal operation; logic 1 indicates no signal detected.

7. Per Section 2.7.1. in the XFP MSA Specification1.

FTLX4213x3xxxx 3200ps/nm DWDM XFP Product Specification – December 2010 F i n i s a r

IV. Optical Characteristics (EOL, TOP = 0 to 70°C, VCC5 = 4.75 to 5.25 Volts)

Transmitter

Parameter Symbol Min Typ Max Unit Ref.

Output Opt . Pwr: 9/ 1 25 SMF POUT 0 +4.0 dBm

Optical Extinction Ratio ER 8.2 dB 1

Center Wavelength Spacing 50 GHz 2

Transmitter Center Wavelength –

End Of Life fc X-5 X X+5 GHz 3

Sidemode Suppression ratio SSRmin 35 dB

Tx Jitter 20kHz-80MHz Txj1 0.3 UI 4,5

Tx Jitter 4MHz – 80MHz Txj2 0.1 UI 4,5

Tx Disable Negate Time tTxE 60 seconds

Relative Intensity Noise RIN -135 dB/Hz

Receiver

Maximum Input Powe r PMAX -7 dBm

Optical Center Wavelength

λ

C

1270 1615 nm

Receiver Reflectance Rrx -27 dB

LOS De-Assert LOSD -30 dBm

LOS Assert LOSA-37 dBm

LOS Hysteresis 0.5 dB

Receiver Sensitivity 6

Data rate

(Gb/s) BER Dispersion

(ps/nm)

Sensitivity back-to-

b

ack at OSNR>30dB

(dBm)

Sensitivity at -500 to

+3200ps/nm with

OSNR>30dB (dB)

Threshold

Adjustm.

10.7 1e-4 -500 to +3200 -27 -25 Yes

11.1 1e-4 -500 to +3200 -27 -25 Yes

11.3 1e-4 -500 to +3200 -27 -25 Yes

OSNR Performance 6,7

Data rate

(Gb/s) BER Dispersion

(ps/nm) Max OSNR, -500 ps/nm to +3200 ps/nm at Power: -8

to -19dBm (dB)

Threshold

Adjust.

10.7 1e-4 -500 to +3200 19 Yes

11.1 1e-4 -500 to +3200 19 Yes

11.3 1e-4 -500 to +3200 19 Yes

Notes:

1. Measured with unfiltered eye pattern. (without 4th order Bessel-Thompson Filter)

2. Corresponds to approximately 0.8 nm. Please contact Finisar for 50GHz support.

3. X = Specified ITU Grid frequency. Wavelength stability is achieved within xx seconds of power up.

Please contact Finisar for narrow tunability support.

4. Measured with a host jitter of 50 mUI peak-to-peak.

5. GR-253-CORE Issue 4

6. Measured at 1528-1600nm with worst ER; BER<10-12; PRBS31.

7. All OSNR measurements are performed with 0.1nm resolution.

FTLX4213x3xxxx 3200ps/nm DWDM XFP Product Specification – December 2010 F i n i s a r

V. General Specifications

Parameter Symbol Min Typ Max Units Ref.

Bit Rate BR 10.7 11.3 Gb/s

Maximum Supported Link Length LMAX 200 km 1

Notes:

1. Distance indicates dispersion budget. Optical amplification is required to achieve maximum distance.

VI. Environmental Specifications

Finisar FTLX4213x3xxxx XFP transceivers have an operating temperature range from

-5°C to +70°C case temperature.

Parameter Symbol Min Typ Max Units Ref.

Case Operating Temperature Top 0 70 °C

Sto rage Temperature Tsto -40 85 °C

VII. Regulatory Compliance

Finisar FTLX4213x3xxxx XFP transceivers are Class 1 Laser Products. They are

certified per the following standards:

Feature Agency Standard Certificate

Number

Laser Eye

Safety FDA/CDRH CDRH 21 CFR 1040 and Laser Notice 50 9210176-77

Laser Eye

Safety TÜV EN 60825-1: 2007, EN60825-2:2004+A1

IEC 60825-1: 2007 (2nd Edition)

IEC 60825-2: 2010 (3rd Edition)

72101686

Electrical

Safety TÜV EN 60950:2006+A11 72101686

Electrical

Safety

UL/CSA

CLASS 3862.07

CLASS 3862.87 2283290

Copies of the referenced certificates are available at Finisar Corporation upon request.

FTLX4213x3xxxx 3200ps/nm DWDM XFP Product Specification – December 2010 F i n i s a r

VIII. Digital Diagnostics Functions

As defined by the XFP MSA1, Finisar XFP transceivers provide digital diagnostic

functions via a 2-wire serial interface, which allows real-time access to the following

operating parameters:

• Transceiver temperature

• Laser bias current

• Transmitted optical power

• Received optical power

• Transceiver supply voltage

• TEC Temperature

It also provides a sophisticated system of alarm and warning flags, which may be used to

alert end-users when particular operating parameters are outside of a factory-set normal

range.

The operating and diagnostics information is monitored and reported by a Digital

Diagnostics Transceiver Controller (DDTC) inside the transceiver, which is accessed

through the 2-wire serial interface. When the serial protocol is activated, the serial clock

signal (SCL pin) is generated by the host. The positive edge clocks data into the XFP

transceiver into those segments of its memory map that are not write-protected. The

negative edge clocks data from the XFP transceiver. The serial data signal (SDA pin) is

bi-directional for serial data transfer. The host uses SDA in conjunction with SCL to

mark the start and end of serial protocol activation. The memories are organized as a

series of 8-bit data words that can be addressed individually or sequentially. The 2-wire

serial interface provides sequential or random access to the 8 bit parameters, addressed

from 000h to the maximum address of the memory.

For more detailed information, including memory map definitions, please see the XFP

MSA documentation1.

Receiver Threshold Adjustment

The FTLX4213M3xxx also provides access to receiver decisio n threshold adjustment via

2-wire serial interface, in order to improve receiver OSNR performance based on specific

link conditions. It is implemented as follows:

• Rx Threshold of XFP transceivers will be factory-set for optimized performance

in non-FEC applications. This will be the default value during both cold start

(power-up) and warm start (module reset).

• The transceiver supports adjustment of Rx Threshold value by the host through

register 76d, table 01h. This is intended to be used in FEC applications.

FTLX4213x3xxxx 3200ps/nm DWDM XFP Product Specification – December 2010 F i n i s a r

• Register 76d, table 01h is a volatile memory. Therefore if the transceiver is

power-cycled, the register starts up with a value of 00h which corresponds to the

default Rx Threshold value.

• The threshold adjustment input value is 2’s complement 7 bit value (-128 to

+127), with 0 corresponding to default Rx threshold value. Full range of

adjustment provides at least a ±10% change in Rx threshold from the default

value.

ITU channel Tuning (per SFF-8477 rev 1.3)

To avoid possible conflict with legacy tuning systems designed to INF-8077i, the

frequency grid tuning commands of SFF-8477 supplement rather than supplant the

wavelength grid tuning commands of INF-8077i.

Tuning Management Interface for ITU Frequency Grid Applications

Finisar’s FTLX4213M3xxxx supports Frequency tuning by channel number only.

The XFP frequency tuning is indicated by the transceiver description encoded in Serial

ID Byte 138 bit 3.

Data Address Bit Description

138 3 Tunable DWDM (selection by channel number, bytes 112-113)

138 2 Tunable DWDM (selection in 50 pm steps, bytes 72-73)

138 0–1 Reserved

A desired frequency channel can be commanded by the user by writing into Bytes 112

(MSB) and 113 (LSB).

Frequency channel control command:

Address Bit Name Description

112 (MSB) &

113 (LSB) All Channel

Number Set User input of channel number, which is

an integer 1 to N (N=Number of

Channels)

114 (MSB) &

115 (LSB) All Frequency Error Frequency error reported in 16 bit

signed integer with LSB=0.1 GHz

116 - 117 All Reserved Reserved

The channel number is derived from the following equation using parameters found in

Module capabilities as listed in Byte Addresses 60-69:

Channel number = 1 + (Desired Frequency – First Frequency) / Grid Spacing

If “0” is used for the channel number, the XFP will go into standby mode until a valid

channel number is received.

FTLX4213x3xxxx 3200ps/nm DWDM XFP Product Specification – December 2010 F i n i s a r

Tunable Transceiver Initialization / Power Cycling:

When a tunable module is plugged in for the first time it will go to a default channel, or if

Tx_DIS is asserted it will go to a standby condition.

When the module is power cycled it will automatically go to the last channel selected, or

if Tx_DIS is asserted it will go to a standby condition. If Tx_DIS is asserted, the last

channel selected will be cleared, and a valid new channel command will be required to

set a channel.

If the Tx is disabled and then re-enabled, the module returns to the last channel

selected.

IX. Mechanical Specifications

Finisar’s XFP transceivers are compliant with the dimensions defined by the XFP Multi-

Sourcing Agreement (MSA).

XFP Transceiver (dimensions are in mm)

FTLX4213x3xxxx 3200ps/nm DWDM XFP Product Specification – December 2010 F i n i s a r

X. PCB Layout and Bezel Recommendations

XFP Host Board Mechanical Layout (dimensions are in mm)

FTLX4213x3xxxx 3200ps/nm DWDM XFP Product Specification – December 2010 F i n i s a r

XFP Detail Host Board M echa n ical Layout (dimensions are in mm)

XFP Recommended Bezel Design (dimensions are in mm)

FTLX4213x3xxxx 3200ps/nm DWDM XFP Product Specification – December 2010 F i n i s a r

XI. Notes & Exceptions

The FTLX4213x3xxxx product family has the following exceptions to the XFP

MSA;

o Tx_Disable time of <100usec,

o Tx_Disable negate time of <60seconds

o Tx_NR is not implemented.

o Reset Completion Bit is not implem ented in EEPROM (Table 0: Byte 84: Bit 0)

XII. References

1. 10 Gigabit Small Form Factor Pluggable Module (XFP) Multi-Source Agreement

(MSA), Rev 4.5 – August 2005. Documentation is currently available at

http://www.xfpmsa.org/

2. Application Note AN-2035: “Digital Diagnostic Monitoring Interface for XFP

Optical Transceivers” – Finisar Corporation, December 2003

3. Directive 2002/95/EC of the European Council Parliament and of the Council,

“on the restriction of the use of certain hazardous substances in electrical and

electronic equipment”. January 27, 2003.

4. “Application Note AN-2038: Finisar Implementation Of RoHS Compliant

Transceivers”, Finisar Corporation, January 21, 2005.

XIII. Revision History

Revision Date Description

A1 4/15/2008

• Preliminary document created.

C1 7/20/2009

• Updated Optical Spec for OSNR & Rx_Sensitivity

• Updated Tx_Disable <100u s

C2 3/18/2010

• Updated Icc3 value

• Corrected Finisar Part Numbers

C3 8/28/2010

• Added “Notes & Exceptions” Section

C4 12/16/2010

• Updated channel availability

XII. For More Information

Finisar Corporation

1389 Moffett Park Drive

Sunnyvale, CA 94089-1133

Tel. 1-408-548-1000

Fax 1-408-541-6138

sales@finisar.com

www.finisar.com