ape le Bs ae gory gol ae ProOcuct | Designed for use in 2 ft x 2 ft raised floor systems Accommodate standard 19" patch panels and/or cable management panels as listed Consolidation points for 2.5" high raised floor systems are designed to fit low profile raised floors Consolidation points for 10" high raised floor systems are intended for high density applications in data centers, server rooms, etc. Consolidation points for 6"- 10" high raised floor systems feature hinged patch panel Mounts allow easy access to patch panels for moves adds and changes Complies with NEC 300-22 (c) requirements for use in environmental air spaces Allows moves, adds and changes without re-terminating and re-testing cable Forms an interconnect between work area cabling and horizontal feeder cables Complies with TIA/EIA-568-B and ISO 11801:2002 requirements Fiber Support Bar is for use with Consolidation Points 1479359 and 1479360 Fiber Support Bar accepts Snap-in Adapter Plates or MPO Cassettes Forward Position Installed Description For Use With Total Capacity Figure Part Number 2.5" Raised Floors 2U(1U+ 1U) - 1479158-1 ae . . 6" Raised Floors 4U (2U+ 2U) A 1479042-1 lidation P f Consolidation Points for Raised Floors 7 Raised Floors 8U (4U + 4U) B 1479359-1 10" Raised Floors 12U (6U + 6U) Cc 1479360-1 Security Consolidation Point for Raised Floors 8" Raised Floors 8U (4U + 4U) D 1479297-1 Fiber Support Bar Kit for use with 1479359 and 1479360 7 Agapter Plates E 14793261 SPHOHHSHHSHHOHSHSHHSHHSHHHHSHSHSHHSHHHHSSHHHSOHEHHHOHHSHSHESHHHHSHHEHHSEHHSOHHEHSEHOHEHHHEEHHEHOCEHEOHEE www.ampnetconnect.com