DRA4114T0A - Panasonic - Datasheet.Live

Ver. AED

This product complies with the RoHS Directive (EU 2002/95/EC).

Publication date: March 2012 1

DRA4114T

Silicon PNP epitaxial planar type

For digital circuits

Complementary to DRC4114T

DRA2114T in NS through hole type package

 Features

 High forward current transfer ratio hFE with excellent linearity

 Low collector-emitter saturation voltage VCE(sat)

 Contributes to miniaturization of sets, mount area reduction

 Eco-friendly Halogen-free package

 Packaging

DRA4114T0A Radial type: 5000 pcs / carton

Absolute Maximum Ratings Ta = 25°C

Parameter Symbol Rating Unit

Collector-base voltage (Emitter open) VCBO –50 V

Collector-emitter voltage (Base open) VCEO –50 V

Collector current IC–100 mA

Total power dissipation PT300 mW

Junction temperature Tj150 °C

Storage temperature Tstg –55 to +150 °C

Electrical Characteristics Ta = 25°C±3°C

Parameter Symbol Conditions Min Typ Max Unit

Collector-base voltage (Emitter open) VCBO IC = –10 µA, IE = 0 –50 V

Collector-emitter voltage (Base open) VCEO IC = –2 mA, IB = 0 –50 V

Collector-base cutoff current (Emitter open) ICBO VCB = –50 V, IE = 0 – 0.1 µA

Collector-emitter cutoff current (Base open) ICEO VCE = –50 V, IB = 0 – 0.5 µA

Emitter-base cutoff current (Collector open) IEBO VEB = –6 V, IC = 0 – 0.01 mA

Forward current transfer ratio hFE VCE = –10 V, IC = –5 mA 160 460 

Collector-emitter saturation voltage VCE(sat) IC = –10 mA, IB = – 0.5 mA – 0.25 V

Input voltage (ON) VI(on) VCE = – 0.2 V, IC = –5 mA –1.2 V

Input voltage (OFF) VI(off) VCE = –5 V, IC = –100 µA – 0.4 V

Input resistance R1–30% 10 +30% kΩ

Note) Measuring methods are based on JAPANESE INDUSTRIAL STANDARD JIS C 7030 measuring methods for transistors.

Package

Code

NS-B2-B-B

Package dimension clicks here.→

Pin Name

1: Emitter

2: Collector

3: Base

Marking Symbol: LD

Internal Connection

Resistance value R110 kΩ

Maintenance/

Discontinued

Maintenance/Discontinued includes following four Product lifecycle stage.

planed maintenance type

maintenance type

planed discontinued typed

discontinued type

Please visit following URL about latest information.

http://www.semicon.panasonic.co.jp/en

Click!

Request for your special attention and precautions in using the technical information and

semiconductors described in this book

(1) If any of the products or technical information described in this book is to be exported or provided to non-residents, the laws and

regulations of the exporting country, especially, those with regard to security export control, must be observed.

(2) The technical information described in this book is intended only to show the main characteristics and application circuit examples

of the products. No license is granted in and to any intellectual property right or other right owned by Panasonic Corporation or any

other company. Therefore, no responsibility is assumed by our company as to the infringement upon any such right owned by any

other company which may arise as a result of the use of technical information described in this book.

(3) The products described in this book are intended to be used for general applications (such as office equipment, communications

equipment, measuring instruments and household appliances), or for specific applications as expressly stated in this book.

Consult our sales staff in advance for information on the following applications:

– Special applications (such as for airplanes, aerospace, automotive equipment, traffic signaling equipment, combustion equipment,

life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of

the products may directly jeopardize life or harm the human body.

It is to be understood that our company shall not be held responsible for any damage incurred as a result of or in connection with

your using the products described in this book for any special application, unless our company agrees to your using the products in

this book for any special application.

(4) The products and product specifications described in this book are subject to change without notice for modification and/or im-

provement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product

Standards in advance to make sure that the latest specifications satisfy your requirements.

(5) When designing your equipment, comply with the range of absolute maximum rating and the guaranteed operating conditions

(operating power supply voltage and operating environment etc.). Especially, please be careful not to exceed the range of absolute

maximum rating on the transient state, such as power-on, power-off and mode-switching. Otherwise, we will not be liable for any

defect which may arise later in your equipment.

Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure

mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire

or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products.

(6) Comply with the instructions for use in order to prevent breakdown and characteristics change due to external factors (ESD, EOS,

thermal stress and mechanical stress) at the time of handling, mounting or at customer's process. When using products for which

damp-proof packing is required, satisfy the conditions, such as shelf life and the elapsed time since first opening the packages.

(7) This book may be not reprinted or reproduced whether wholly or partially, without the prior written permission of our company.

20100202