SMD Sealed Type Single-Turn PVG3 Series
#2 (Wiper)
#1 #3
Clockwise
Circuit
PVG3A
PVG3GPVG3K
Part Number Power Rating
(W)
Number of Turns
(Effective Rotation Angle) Total Resistance Value TCR
(ppm/°C)
PVG3A100C01
PVG3A200C01
PVG3A500C01 0.25 (70 °C) 1 (210 ° ±10 °) 50 ohm ± 20% ±150
0.25 (70 °C) 1 (210 ° ±10 °) 10 ohm ± 20% ±150
0.25 (70 °C) 1 (210 ° ±10 °) 20 ohm ± 20% ±150
PVG3A101C01 0.25 (70 °C) 1 (210 ° ±10 °) 100 ohm ± 20% ±150
PVG3A201C01 0.25 (70 °C) 1 (210 ° ±10 °) 200 ohm ± 20% ±150
PVG3A501C01 0.25 (70 °C) 1 (210 ° ±10 °) 500 ohm ± 20% ±150
PVG3A102C01 0.25 (70 °C) 1 (210 ° ±10 °) 1k ohm ± 20% ±150
PVG3A202C01 0.25 (70 °C) 1 (210 ° ±10 °) 2k ohm ± 20% ±150
PVG3A502C01 0.25 (70 °C) 1 (210 ° ±10 °) 5k ohm ± 20% ±150
PVG3A103C01 0.25 (70 °C) 1 (210 ° ±10 °) 10k ohm ± 20% ±150
PVG3A203C01 0.25 (70 °C) 1 (210 ° ±10 °) 20k ohm ± 20% ±150
PVG3A503C01 0.25 (70 °C) 1 (210 ° ±10 °) 50k ohm ± 20% ±150
PVG3A104C01 0.25 (70 °C) 1 (210 ° ±10 °) 100k ohm ± 20% ±150
PVG3A204C01 0.25 (70 °C) 1 (210 ° ±10 °) 200k ohm ± 20% ±150
PVG3A504C01 0.25 (70 °C) 1 (210 ° ±10 °) 500k ohm ± 20% ±150
PVG3A105C01 0.25 (70 °C) 1 (210 ° ±10 °) 1M ohm ± 20% ±150
PVG3A205C01 0.25 (70 °C) 1 (210 ° ±10 °) 2M ohm ± 20%
Mechanical Rotation
Angle
250 ± 10 °
250 ± 10 °
250 ± 10 °
250 ± 10 °
250 ± 10 °
250 ± 10 °
250 ± 10 °
250 ± 10 °
250 ± 10 °
250 ± 10 °
250 ± 10 °
250 ± 10 °
250 ± 10 °
250 ± 10 °
250 ± 10 °
250 ± 10 °
250 ± 10 ° ±150
Operating Temperature Range: -55 to +125 °C
Top Adjustment (Standard J-Hook Style)
Trimmer Potentiometers
Soldering Method: Reflow / Soldering Iron
PVG3.pdf
03/14/19
Features
1. Surface Mount 3 mm Square / Single-turn / Cermet / Sealed
2. Available in J-hook, gull-wing and reverse gull-wing pin styles
4. 3 mm design meets EIA/EIAJ/IPC/VECI SMD standard
trimmer footprint
6.
5. RoHS compliant*
*RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011.
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of
this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
DIMENSIONS: MM
(INCHES)
7.
Metal cover for thermal protection/heat transfer
Units tested under 85 °C water test for 60 seconds, no bubbles
0.25
(.010)
TOLERANCES: ±
EXCEPT WHERE NOTED
3.6
(.142)
2
2.0
(.079)
2.3
(.091)
3.4
(.134)
3 1
ADJ. SLOT
2.2
(.087)
.45
(.018)
.40
(.016)
WIDE
X
XDEEP
DIA.
0.1
(.004)
MIN.
0.6
(.024)
0.75 ± 0.15
(.030 ± .006)
1.00 ± 0.15
(.039 ± .006)
2.7
(.106)
3.6
(.142)
3.6
(.142)
2
2.3
(.091)
3.4
(.134)
3 1
ADJ. SLOT
2.2
(.087)
.45
(.018)
.40
(.016)
WIDE
X
XDEEP
DIA.
2.0
(.079)
0.1
(.004)
MIN.
0.75 ± 0.15
(.030 ± .006)
1.00 ± 0.15
(.039 ± .006)
2.7
(.106)
4.5
(.177)
3.6
(.142)
2
2.3
(.091)
1.1
(.043) 3.4
(.134)
31
ADJ. SLOT
2.2
(.087)
0.50
(.020)
0.55
(.022)
WIDE
X
XDEEP
DIA.
0.8 ± 0.2
(.031 ± .008) 2.8
(.110)
2.8
(.110)
5.8
(.228)
2.5
(.098)
2.0
(.079)
0.5
(.020)
0.5
(.020) 2 PLCS.
2 PLCS.
0.1
(.004)
MIN.
3. Units can be pre-adjusted at clockwise, counter-clockwise
or standard 50 % position
WARNING Cancer and Reproductive Harm
www.P65Warnings.ca.gov
PVG3.pdf
03/14/19
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
Part Number Power Rating
(W)
Number of Turns
(Effective Rotation Angle) Total Resistance Value TCR
(ppm/°C)
PVG3G100C01
PVG3G200C01
PVG3G500C01 0.25 (70 °C) 1 (210 ° ±10 °) 50 ohm ± 20% ±150
0.25 (70 °C) 1 (210 ° ±10 °) 10 ohm ± 20% ±150
0.25 (70 °C) 1 (210 ° ±10 °) 20 ohm ± 20% ±150
PVG3G101C01 0.25 (70 °C) 1 (210 ° ±10 °) 100 ohm ± 20% ±150
PVG3G201C01 0.25 (70 °C) 1 (210 ° ±10 °) 200 ohm ± 20% ±150
PVG3G501C01 0.25 (70 °C) 1 (210 ° ±10 °) 500 ohm ± 20% ±150
PVG3G102C01 0.25 (70 °C) 1 (210 ° ±10 °) 1k ohm ± 20% ±150
PVG3G202C01 0.25 (70 °C) 1 (210 ° ±10 °) 2k ohm ± 20% ±150
PVG3G502C01 0.25 (70 °C) 1 (210 ° ±10 °) 5k ohm ± 20% ±150
PVG3G103C01 0.25 (70 °C) 1 (210 ° ±10 °) 10k ohm ± 20% ±150
PVG3G203C01 0.25 (70 °C) 1 (210 ° ±10 °) 20k ohm ± 20% ±150
PVG3G503C01 0.25 (70 °C) 1 (210 ° ±10 °) 50k ohm ± 20% ±150
PVG3G104C01 0.25 (70 °C) 1 (210 ° ±10 °) 100k ohm ± 20% ±150
PVG3G204C01 0.25 (70 °C) 1 (210 ° ±10 °) 200k ohm ± 20% ±150
PVG3G504C01 0.25 (70 °C) 1 (210 ° ±10 °) 500k ohm ± 20% ±150
PVG3G105C01 0.25 (70 °C) 1 (210 ° ±10 °) 1M ohm ± 20% ±150
PVG3G205C01 0.25 (70 °C) 1 (210 ° ±10 °) 2M ohm ± 20%
Mechanical Rotation
Angle
250 ± 10 °
250 ± 10 °
250 ± 10 °
250 ± 10 °
250 ± 10 °
250 ± 10 °
250 ± 10 °
250 ± 10 °
250 ± 10 °
250 ± 10 °
250 ± 10 °
250 ± 10 °
250 ± 10 °
250 ± 10 °
250 ± 10 °
250 ± 10 °
250 ± 10 ° ±150
Operating Temperature Range: -55 to +125 °C
Top Adjustment (Gull-Wing Style)
Soldering Method: Reflow / Soldering Iron
Part Number Power Rating
(W)
Number of Turns
(Effective Rotation Angle) Total Resistance Value TCR
(ppm/°C)
PVG3K100C01
PVG3K200C01
PVG3K500C01 0.25 (70 °C) 1 (210 ° ±10 °) 50 ohm ± 20% ±150
0.25 (70 °C) 1 (210 ° ±10 °) 10 ohm ± 20% ±150
0.25 (70 °C) 1 (210 ° ±10 °) 20 ohm ± 20% ±150
PVG3K101C01 0.25 (70 °C) 1 (210 ° ±10 °) 100 ohm ± 20% ±150
PVG3K201C01 0.25 (70 °C) 1 (210 ° ±10 °) 200 ohm ± 20% ±150
PVG3K501C01 0.25 (70 °C) 1 (210 ° ±10 °) 500 ohm ± 20% ±150
PVG3K102C01 0.25 (70 °C) 1 (210 ° ±10 °) 1k ohm ± 20% ±150
PVG3K202C01 0.25 (70 °C) 1 (210 ° ±10 °) 2k ohm ± 20% ±150
PVG3K502C01 0.25 (70 °C) 1 (210 ° ±10 °) 5k ohm ± 20% ±150
PVG3K103C01 0.25 (70 °C) 1 (210 ° ±10 °) 10k ohm ± 20% ±150
PVG3K203C01 0.25 (70 °C) 1 (210 ° ±10 °) 20k ohm ± 20% ±150
PVG3K503C01 0.25 (70 °C) 1 (210 ° ±10 °) 50k ohm ± 20% ±150
PVG3K104C01 0.25 (70 °C) 1 (210 ° ±10 °) 100k ohm ± 20% ±150
PVG3K204C01 0.25 (70 °C) 1 (210 ° ±10 °) 200k ohm ± 20% ±150
PVG3K504C01 0.25 (70 °C) 1 (210 ° ±10 °) 500k ohm ± 20% ±150
PVG3K105C01 0.25 (70 °C) 1 (210 ° ±10 °) 1M ohm ± 20% ±150
PVG3K205C01 0.25 (70 °C) 1 (210 ° ±10 °) 2M ohm ± 20%
Mechanical Rotation
Angle
250 ± 10 °
250 ± 10 °
250 ± 10 °
250 ± 10 °
250 ± 10 °
250 ± 10 °
250 ± 10 °
250 ± 10 °
250 ± 10 °
250 ± 10 °
250 ± 10 °
250 ± 10 °
250 ± 10 °
250 ± 10 °
250 ± 10 °
250 ± 10 °
250 ± 10 ° ±150
Operating Temperature Range: -55 to +125 °C
Rear Adjustment (Reverse Gull-Wing Style)
Soldering Method: Reflow / Soldering Iron
PVG3.pdf
03/14/19
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
Standard Land Patterns
PVG3A PVG3G PVG3K
MM
(INCHES)
DIMENSIONS:
0.1
(.004)
TOLERANCES: ±
EXCEPT WHERE NOTED
1.4
(.055)
1.1
(.043)
1.1
(.043)
1.2
(.047)
0.9
(.035)
0.9
(.035)
2.1
(.083)
2.1
(.083)
1.4
(.055)
1.1
(.043)
1.1
(.043)
1.2
(.047)
1.3
(.051)
1.3
(.051)
2.5
(.098)
2.5
(.098)
1.5
(.059)
1.0
(.039)
3.1
(.122)
1.2
(.047)
3.1
(.122)
1.1
(.043)
1.2
(.047)
1.0
(.039)
ΔTR : ±2%
ΔV.S.S.: ±1%
ΔTR : ±2%
IR : 10M ohm min.
ΔTR : ±1%
ΔV.S.S.: ±1%
ΔTR : ±1%
ΔV.S.S.: ±1%
ΔTR : ±3% or 3 ohm max., whichever is greater
ΔV.S.S.: ±1%
ΔTR : ±2%
ΔV.S.S.: ±2%
ΔTR : ±3%
ΔV.S.S.: ±2%
ΔTR : R≤100 kohm
±3% or 2 ohm max., whichever is greater
R>100 kohm
+0/-10% (50 cycles)
Temperature
Cycle
Humidity
Vibration (20G)
Shock (100G)
Temperature
Load Life
Low Temperature
Exposure
High Temperature
Exposure
Rotational Life
ΔTR : Total Resistance Change
ΔV.S.S.: Voltage Setting Stability
IR : Insulation Resistance
Characteristics Part Numbering
PV G3 A 103 C01 R00
Product ID
PV = Trimming Potentiometer
Series
G3 = SMD Sealed 3 mm Square, Single-Turn
Pin Style
A = J-Hook
G = Gull-Wing
K = Reverse Gull-Wing
Total Resistance
Expressed by three figures.
The first and second figures are
significant digits; the third figure expresses
the number of zeros that follow.
Individual Specification
C01 = Standard Type
Packaging
R00 = Tape and Reel (1,000 pcs./7 ” reel)
Resistance Resistance
(Ohms) Code
10 100
20 200
50 500
100 101
200 201
500 501
1,000 102
2,000 202
5,000 502
10,000 103
20,000 203
50,000 503
100,000 104
200,000 204
500,000 504
1,000,000 105
2,000,000 205
Popular distribution values listed in boldface.
Special resistances available.
Legal Disclaimer Notice
This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and its
afliates (collectively, “Bourns”).
Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change
without notice. Users should check for and obtain the latest relevant information and verify that such information is current and
complete before placing orders for Bourns® products.
The characteristics and parameters of a Bourns® product set forth in its data sheet are based on laboratory conditions, and
statements regarding the suitability of products for certain types of applications are based on Bourns’ knowledge of typical
requirements in generic applications. The characteristics and parameters of a Bourns® product in a user application may vary
from the data sheet characteristics and parameters due to (i) the combination of the Bourns® product with other components
in the user’s application, or (ii) the environment of the user application itself. The characteristics and parameters of a Bourns®
product also can and do vary in different applications and actual performance may vary over time. Users should always verify
the actual performance of the Bourns® product in their specic devices and applications, and make their own independent
judgments regarding the amount of additional test margin to design into their device or application to compensate for
differences between laboratory and real world conditions.
Unless Bourns has explicitly designated an individual Bourns® product as meeting the requirements of a particular industry
standard (e.g., ISO/TS 16949) or a particular qualication (e.g., UL listed or recognized), Bourns is not responsible for any
failure of an individual Bourns® product to meet the requirements of such industry standard or particular qualication. Users of
Bourns® products are responsible for ensuring compliance with safety-related requirements and standards applicable to their
devices or applications.
Bourns® products are not recommended, authorized or intended for use in nuclear, lifesaving, life-critical or life-sustaining ap-
plications, nor in any other applications where failure or malfunction may result in personal injury, death, or severe property or
environmental damage. Unless expressly and specically approved in writing by two authorized Bourns representatives on a
case-by-case basis, use of any Bourns® products in such unauthorized applications might not be safe and thus is at the user’s
sole risk. Life-critical applications include devices identied by the U.S. Food and Drug Administration as Class III devices and
generally equivalent classications outside of the United States.
Bourns expressly identies those Bourns® standard products that are suitable for use in automotive applications on such
products’ data sheets in the section entitled “Applications.” Unless expressly and specically approved in writing by two
authorized Bourns representatives on a case-by-case basis, use of any other Bourns® standard products in an automotive
application might not be safe and thus is not recommended, authorized or intended and is at the user’s sole risk. If Bourns
expressly identies a sub-category of automotive application in the data sheet for its standard products (such as infotainment
or lighting), such identication means that Bourns has reviewed its standard product and has determined that if such Bourns®
standard product is considered for potential use in automotive applications, it should only be used in such sub-category of
automotive applications. Any reference to Bourns® standard product in the data sheet as compliant with the AEC-Q standard
or “automotive grade” does not by itself mean that Bourns has approved such product for use in an automotive application.
Bourns® standard products are not tested to comply with United States Federal Aviation Administration standards generally
or any other generally equivalent governmental organization standard applicable to products designed or manufactured for
use in aircraft or space applications. Bourns expressly identies Bourns® standard products that are suitable for use in aircraft
or space applications on such products’ data sheets in the section entitled “Applications.” Unless expressly and specically
approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any other Bourns® standard
product in an aircraft or space application might not be safe and thus is not recommended, authorized or intended and is at the
user’s sole risk.
The use and level of testing applicable to Bourns® custom products shall be negotiated on a case-by-case basis by Bourns and
the user for which such Bourns® custom products are specially designed. Absent a written agreement between Bourns and the
user regarding the use and level of such testing, the above provisions applicable to Bourns® standard products shall also apply
to such Bourns® custom products.
Users shall not sell, transfer, export or re-export any Bourns® products or technology for use in activities which involve the
design, development, production, use or stockpiling of nuclear, chemical or biological weapons or missiles, nor shall they use
Bourns® products or technology in any facility which engages in activities relating to such devices. The foregoing restrictions
apply to all uses and applications that violate national or international prohibitions, including embargos or international
regulations. Further, Bourns® products and Bourns technology and technical data may not under any circumstance be
exported or re-exported to countries subject to international sanctions or embargoes. Bourns® products may not, without prior
authorization from Bourns and/or the U.S. Government, be resold, transferred, or re-exported to any party not eligible
to receive U.S. commodities, software, and technical data.
To the maximum extent permitted by applicable law, Bourns disclaims (i) any and all liability for special, punitive, consequential,
incidental or indirect damages or lost revenues or lost prots, and (ii) any and all implied warranties, including implied warranties
of tness for particular purpose, non-infringement and merchantability.
For your convenience, copies of this Legal Disclaimer Notice with German, Spanish, Japanese, Traditional Chinese and Simplied Chinese
bilingual versions are available at:
Web Page: http://www.bourns.com/legal/disclaimers-terms-and-policies
PDF: http://www.bourns.com/docs/Legal/disclaimer.pdf
C1753 05/17/18R