BIASED COAXIAL SCHOTTKY DETECTORS The ACSP series of high sensitivity detectors exhibit superior electrical and environmental reliability characteristics. They contain hermetically sealed modules, internal RF matching, DC return, and RF bypass capacitor. In addition, the video port is protected from static or transient voltages. This feature prevents damage due to handling (usually static) or system video transients. Models may be chosen for broadband RF performance or for optimized narrow bands. Each detector model contains: * Input Impedance Matching * DC return * RF bypass capacitor * Detector diode Applications: * Transmitter Monitoring * Radar Equipment * Missile Guidance Systems * Input to Low-Noise Amplifiers * Broadband Or Narrowband ECM Receivers * Power and Signal Monitors * Doppler Radar and Beacon Receivers * Matched units available for Multi-channel Receivers, Amplitude Comparator Systems and Discriminators Frequency Range (GHz) 0.1 - 1 0.1 - 2 0.5 - 2 1-4 2-4 2-6 1-6 4-8 0.5 - 12 1 - 12 2 - 12 8 - 12 0.5 - 18 1 - 18 2 - 18 6 - 18 12 - 18 NOTES: 1) 2) 3) 4) 5) 6) Part (1) Number Minimum(2) Sensitivity K (mV/mW) Flatness vs Frequency (+/-dB) Typical (2) TSS (dBm) Nominal (4) Video Capacitance (pF) Standard Case Styles Optional Case Styles ACSP2517N ACSP2538N ACSP2501N ACSP2630N ACSP2502N ACSP2546N ACSP2656N ACSP2503N ACSP2658N ACSP2762N ACSP2507N ACSP2504N ACSP2572N ACSP2759N ACSP2506N ACSP2523N ACSP2505N 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2100 1800 1500 1800 1800 2000 0.28 0.3 0.3 0.3 0.2 0.3 0.5 0.3 1.3 1.5 1.1 0.4 1.5 1.25 1.5 1.0 0.6 -52 -52 -53 -53 -53 -53 -53 -53 -52 -51 -53 -53 -52 -50 -51 -51 -52 270 270 75 39 20 12 12 12 75 20 12 12 12 20 12 12 12 C3 C3 C3 C3 C3 C3 C3 C3 C3 C3 C3 C3 C3 C3 C3 C3 C3 C8,C15 C8,C15 C8,C15 C8,C15 C8,C15 C8,C15 C8,C15 C8,C15 C8,C15 C8,C15 C8,C15 C8,C15,C32 C15,C32 C15,C32 C15,C32 C15,C32 C15,C32 Standard output polarity is negative. If positive output is required, substitute "P" for "N" in part number. Measured into an open circuit load (>10k ohm). VSWR measured at or below -20dBm input power level. Video capacitance is used for RF bypass. This value can be changed if required for video response time or other considerations. Contact the factory if value other than those shown are needed. Standard bias is 100 microamps. Zero bias schottky versions are available for most of listed biased schottky models with only minor differences in specifications. a. The zero bias schottky has an impedance of several thousand ohms. b. Zero bias schottky detectors exhibit less sensitive TSS due to the high diode impedance (typically a 3dB reduction). c. The temperature performance of the zero bias schottky is poor when operating at low input power levels. This difference becomes small at high levels (above 0dBm input power). The part number of zero bias versions includes a "Z" following the polarity indicator. 611 Industrial Way West, Eatontown, NJ 07724 tel: 732-460-0212 fax: 732-460-0214 sales@advanced-control.com www.advanced-control.com ENVIRONMENTAL SPECIFICATIONS: MIL-E-5400, MIL-STD-202, MIL-E-16400 Operating Temp: -65C to +125C Storage Temp: -65C to +150C Humidity: MIL-STD-202F, M103, Cond B Shock: MIL-STD-202F, M213, Cond B Altitude: MIL-STD-202F, M105, Cond B Vibration : MIL-STD-202F, M204, Cond B Thermal Shock: MIL-STD-202F, M107, Cond A Temperature Cycle: MIL-STD-202F, M105C, Cond D Maximum Input Power: +20dBm SCREENING : Standard Screening: Internal Visual per MIL-STD-883, Method 2017 Temperature Cycle: -65C to +100C, 10 cycles Optional High-Rel Screening (Ref MIL-PRF-38534): Internal Visual per MIL-STD-883, Method 2017 Stabilization Bake per MIL-STD-883, Method 1008 Temperature Cycle per MIL-STD-883, Method 1010 Constant Acceleration per MIL-STD-883, Method 2001 Burn-in per MIL-STD-883, Method 1015 Leak Test per MIL-STD-883, Method 1014 External Visual per MIL-STD-883, Method 2009 TYPE-N MALE (INPUT) SMA MALE (INPUT) 1.320.020 2.800.020 O0.625 O0.312 BNC FEMALE (OUTPUT) SMA FEMALE (OUTPUT) CASE STYLE C3 CASE STYLE C8 0.42 SMA MALE (INPUT) 2.00 SMA MALE (INPUT) 1.160.020 O0.500 O0.312 0.43 SMA FEMALE (OUTPUT) BNC FEMALE (OUTPUT) CASE STYLE C15 Part Number Ordering Information: CASE STYLE C32 Example: ACSP2503NZC3X20 ACSP2503: Biased Coaxial Schottky Detector, 4 - 8GHz N: Negative output polarity Z: Zero bias version (omit for biased version) C3: Package type X: No video protection (omit for inclusion of video protection) 20: 20pF custom output capacitance (omit for standard value) SPB-0205 611 Industrial Way West, Eatontown, NJ 07724 tel: 732-460-0212 fax: 732-460-0214 sales@advanced-control.com www.advanced-control.com