_______________________________________________________________________________ XC62FP Series Positive Voltage Regulators General Description 3. Voltage Regulators DETAILS Features Max. output current: 250mA (within max. power dissipation, VOUT = 5.0V) Output voltage: 2.0V to 6.0V in 0.1V increments (1.1V to 1.9V for custom products) Highly accurate: Output voltage 2% (1% for semi-custom products) Low power consumption: Typ. 2.0A at VOUT = 5.0V Output voltage temperature coefficient: 0.1% / V: Typ. 100ppm/C Line regulation: Typ. 0.2% / V Dropout voltage: 120mV @ 100mA (5.0V) Ultra small package: SOT-23 (150mW) mini-mold and SOT-89 (500mW) mini-power mold *TO-92 (300mW) package also available. (order basis) The XC62FP series is a group of positive voltage output, three-pin regulators, that provide a high current even when the input/output voltage differential is small. Low power consumption and high accuracy is achieved through CMOS and laser trimming technologies. The XC62FP consists of a high-precision voltage reference, an error correction circuit, and a current limited output driver. Transient response to load variations have improved in comparison to the existing series. SOT-23 (150mW) and SOT-89 (500mW) packages are available. Pin Configuration Pin Assignment VIN 3 PIN NUMBER 1 2 VSS VOUT SOT-23 (TOP VIEW) 1 VSS SOT-23 SOT-89 PIN NAME FUNCTION 1 1 VSS Ground 3 2 VIN Supply voltage input 2 3 VOUT Regulated voltage output 2 3 VIN VOUT SOT-89 (TOP VIEW) Block Diagram VOUT VIN Current Limit + Voltage Reference VSS Ordering Information XC62FPxxxxxx a b cde f DESIGNATOR a b c d DESCRIPTION Polarity of Output Voltage : P : + (Positive) Output Voltage : 30 = 3.0V 50 = 5.0V Temperature Coefficients : 0 = 100ppm (typical) Output Voltage Accuracy : 1 = 1.0% ( Semi-Custom ) 2 = 2.0% DESIGNATOR DESCRIPTION e Package Type M = SOT-23 P = SOT-89 T = TO-92 f Device Orientation : R = Embossed Tape ( Right ) L = Embossed Tape ( Left ) H = Paper Tape (TO-92) B = Bag (TO-92) 23