STING F I XED ,0 ORES S ST 00 TEST L & GRAP DI S P L AY CAL *True Megohmmeter(R) * Fixed or programmable test voltage from 40V to 10kV/15kV * Wide measurement range from 10k to 30T * 5mA charging current * Step voltage testing * Ramp voltage testing * Automatic calculation of DAR / PI / DD /R (ppm/V) ratios * Large, backlit graphical LCD screen with digital display, bargraph and R(t)+V(t), I(t) and I(V) graphs * Multiple test modes: voltage ramp and step with "Burn-In", "Early-Break" and "I-Limit" modes * Three filter settings to optimize measurement stability * Calculation of R at a reference temperature * Storage of 80,000 measurements * Includes DataView (R) software for data storage, real-time display, analysis and report generation *Optically-isolated USB communication for transfer onto PC and report generation with DataView(R) software TE HI MODELS AMP & IP 53 SPECIFICATIONS FEATURES ,R 80 Expert tools for testing insulation safely and accurately; ideal for use on rotating machinery and cables operating at higher voltages STEP Models 6550 & 6555 Special product features D I G I TA MEGOHMMETERS 10,000 & 15,000V Digital Rated 6550 6555 INSULATION TESTS Test Voltage 500V 1000V 2500V 5000V 10,000V 15,000V Fixed Test Voltages Variable Voltages Ramp Mode Ramp Configuration Range Step Mode Voltage Measurement After Test Capacitance Measurement Leakage Current Measurement Discharge After Test Additional Test Stop Modes I-Limit Early-Break Timer Burn Mode Ratio Calculation Calculation of R at ref. T Measurement Display Filter Graphs on Display Storage Communication PC Software Power Supply Battery Charging Electrical Safety EMC, Mechanical Protection, Altitude Dimensions / Weight 10k to 2000G (2T) 10k to 4000G (4T) 10k to 10,000G (10T) 10k to 15,000G (15T) 10k to 25,000G (25T) - 10k to 30,000G (30T) 500/1000/2500/5000/ 500/1000/2500/5000/ 10,000V 10,000/15,000V Variable: 40 to 10kV Variable: 40 to 15kV Three user programmable Three user programmable voltage schemes voltage schemes Programmable ramps: start voltage/end voltage/duration 40 to 1100V/500 to 10,000V 40 to 1100V/500 to 15,000V Up to 10 steps (voltage and duration configurable for each step) 0 to 2500Vac; 0 to 4000Vdc 0.05 to 9.999F/10.00 to 49.99F 0 to 8mA Yes/Automatic Programmable: 0.2 to 5mA di/dt Up to 99 minutes 59 seconds Constant testing PI, DAR, DD Yes 3 filters with 3 possible time-constants R(t)+V(t); I(t); I(V) 256 registers, stores 80,000 points: R, V, I and date USB optically-isolated port DataView(R) NiMH rechargeable batteries, two 9.6V 4Ah battery packs charging by external voltage: 90 to 260V; 50/60Hz Battery charging allowed while performing insulation measurements 1000V CAT IV; IEC61010-1 and IEC 61557 EN 61326-1, IP54, 3000m 13.39 x 11.81 x 7.87" (340 x 300 x 200mm)/approx. 6.2kg (13.7lb) PRODUCT INCLUDES USB Stick Quick start user guide, and USB stick supplied with DataView(R) software and user manual. Technical Assistance (800) 343-1391 Small classic tool bag, set of color-coded (red/blue/black) 9 ft (15kV) integral leads and alligator clips (1000V CAT IV), one 15kV jumper lead (blue), set of two color-coded test probes (red/black-1000V CAT IV), optical USB cable, 115V US power cord, 9.6V rechargeable NiMH batteries. www.aemc.com (R) DATAVIEW MEGOHMMETERS Software 5000V for Megohmmeters Digital Special product features Displays All stored test results presented on screen. Typical and customized reports generated from DataView (R) software. Clear and straight forward set up of parameters. Real-time display of measurement results. CATALOG NO. DESCRIPTION 2130.31 Megohmmeter Model 6550 (Graphical, Analog Bargraph, Backlight, Alarm, Timer, 500V, 1000V, 2500V, 5000V, 10kV, Ramp, StepV, Variable, Auto DAR/PI/DD, USB Stick w/DataView(R) software) 2130.32 Megohmmeter Model 6555 (Graphical, Analog Bargraph, Backlight, Alarm, Timer, 500V, 1000V, 2500V, 5000V, 10kV, 15kV, Ramp, StepV, Variable, Auto DAR/PI/DD, USB Stick w/DataView(R) software) Technical Assistance (800) 343-1391 MEGOHMMETERS 5000V Digital Data Analysis and Reporting Software for Megohmmeters Configure all functions of the Megohmmeter Models 1060, 5060, 5070, 6550 & 6555 * Print reports of all test results * Display DAR and PI ratios * Select test voltage and run tests from your computer with a simple click and execute process * Plot graphs of manual and timed tests * Capture and display data in real-time * Store a library of setups for different applications * Retrieve data from the instrument's memory: * Over 1500 insulation resistance measurements * Over 4000 resistance measurements * Include your analysis comments section with the report * Certification of results through report generation * Free updates are available on our website www.aemc.com Typical DataView(R) Functional Displays Model 5070 includes Ramp Function which allows programming of three different ramp test profiles, each containing up to five voltage steps between 40 and 5100V and time per step of up to 10 hours. Four tabbed dialog boxes allow for clear and easy setup of all functions of the Model 5070, including setup for variable voltage and alarm set points, as well as step voltage tests and temperature compensation. One button operation starts test and graphs results Clear and easy setup from one dialog box for Model 5060. Insulation resistance during the test run Test voltage selection Step voltage during the test run Test result status box displays complete test results in real-time Insulation resistance with temperature compensation Run test and display text and graphical results from one dialog box. Model 5070 also displays step voltage. Technical Assistance (800) 343-1391 www.aemc.com