Technical Assistance (800) 343-1391 www.aemc.com
SPECIFICATIONS
MODELS 6550 6555
INSULATION TESTS
Test Voltage 500V
1000V
2500V
5000V
10,000V
10kΩ to 2000GΩ (2TΩ)
10kΩ to 4000GΩ (4TΩ)
10kΩ to 10,000GΩ (10TΩ)
10kΩ to 15,000GΩ (15TΩ)
10kΩ to 25,000GΩ (25TΩ)
15,000V – 10kΩ to 30,000GΩ (30TΩ)
Fixed Test Voltages 500/1000/2500/5000/
10,000V
500/1000/2500/5000/
10,000/15,000V
Variable Voltages Variable: 40 to 10kV
Three user programmable
voltage schemes
Variable: 40 to 15kV
Three user programmable
voltage schemes
Ramp Mode Programmable ramps: start voltage/end voltage/duration
Ramp Configuration Range 40 to 1100V/500 to 10,000V 40 to 1100V/500 to 15,000V
Step Mode Up to 10 steps (voltage and duration configurable for each step)
Voltage Measurement After Test 0 to 2500Vac; 0 to 4000Vdc
Capacitance Measurement 0.05 to 9.999μF/10.00 to 49.99μF
Leakage Current Measurement 0 to 8mA
Discharge After Test Yes/Automatic
Additional Test Stop Modes
I-Limit Programmable: 0.2 to 5mA
Early-Break di/dt
Timer Up to 99 minutes 59 seconds
Burn Mode Constant testing
Ratio Calculation PI, DAR, DD
Calculation of R at ref. T° Yes
Measurement Display Filter 3 filters with 3 possible time-constants
Graphs on Display R(t)+V(t); I(t); I(V)
Storage 256 registers, stores 80,000 points: R, V, I and date
Communication USB optically-isolated port
PC Software DataView®
Power Supply NiMH rechargeable batteries, two 9.6V 4Ah battery packs
charging by external voltage: 90 to 260V; 50/60Hz
Battery Charging Battery charging allowed while performing insulation measurements
Electrical Safety 1000V CAT IV; IEC61010-1 and IEC 61557
EMC, Mechanical Protection,
Altitude EN 61326-1, IP54, 3000m
Dimensions / Weight 13.39 x 11.81 x 7.87" (340 x 300 x 200mm)/approx. 6.2kg (13.7lb)
MEGOHMMETERS
10,000 & 15,000V Digital
Expert tools for testing
insulation safely and
accurately; ideal for use on
rotating machinery and cables
operating at higher voltages
Models 6550 & 6555
PRODUCT INCLUDES
Small classic tool bag, set of color-coded (red/blue/black)
9 ft (15kV) integral leads and alligator clips (1000V
CAT IV), one 15kV jumper lead (blue),
set of two color-coded test probes
(red/black-1000V CAT IV), optical
USB cable, 115V US power cord, 9.6V
rechargeable NiMH batteries.
USB Stick
Quick start user guide,
and USB stick supplied
with DataView® software
and user manual.
Special
product
features
▼
F
I
X
E
D
,
R
A
M
P
&
S
T
E
P
S
T
O
R
E
S
D
I
G
I
T
A
L
&
G
R
A
P
H
I
C
A
L
T
E
S
T
I
N
G
8
0
,
0
0
0
T
E
S
T
S
D
I
S
P
L
A
Y
IP
Rated
53
FEATURES
• True Megohmmeter®
• Fixed or programmable test
voltage from 40V to 10kV/15kV
• Wide measurement range from
10kΩ to 30TΩ
• 5mA charging current
• Step voltage testing
• Ramp voltage testing
• Automatic calculation of DAR /
PI / DD /∆R (ppm/V) ratios
• Large, backlit graphical LCD
screen with digital display,
bargraph and R(t)+V(t), I(t)
and I(V) graphs
• Multiple test modes: voltage
ramp and step with “Burn-In”,
“Early-Break” and “I-Limit”
modes
• Three filter settings to optimize
measurement stability
• Calculation of R at a reference
temperature
• Storage of 80,000
measurements
•Includes DataView® software
for data storage, real-time
display, analysis and report
generation
• Optically-isolated USB
communication for transfer onto
PC and report generation with
DataView® software
MEGOHMMETERS
5000V Digital
Special
product
features
▼
www.aemc.com
Technical Assistance (800) 343-1391
Displays
CATALOG NO. DESCRIPTION
2130.31 Megohmmeter Model 6550 (Graphical, Analog Bargraph, Backlight, Alarm, Timer, 500V, 1000V,
2500V, 5000V, 10kV, Ramp, StepV, Variable, Auto DAR/PI/DD, USB Stick w/DataView® software)
2130.32 Megohmmeter Model 6555 (Graphical, Analog Bargraph, Backlight, Alarm, Timer, 500V, 1000V,
2500V, 5000V, 10kV, 15kV, Ramp, StepV, Variable, Auto DAR/PI/DD, USB Stick w/DataView® software)
All stored test results presented on screen.
Clear and straight forward set up of parameters.
DATAVIEW®
Software for Megohmmeters
Real-time display of measurement results.
Typical and customized reports generated from DataView® software.
MEGOHMMETERS
5000V Digital
Technical Assistance (800) 343-1391 www.aemc.com
Clear and easy setup from one dialog box for
Model 5060.
Model 5070 includes Ramp Function which allows
programming of three different ramp test profiles,
each containing up to five voltage steps between
40 and 5100V and time per step of up to 10 hours.
Four tabbed dialog boxes allow for clear and easy
setup of all functions of the Model 5070, including
setup for variable voltage and alarm set points, as well
as step voltage tests and temperature compensation.
Run test and display text and graphical results from one dialog box.
Model 5070 also displays step voltage.
Test result status box
displays complete test
results in real-time
Test
voltage
selection
Insulation resistance
during the test run
Step voltage during
the test run
Insulation resistance
with temperature
compensation
One button operation
starts test and
graphs results
•Print reports of all test results
•Select test voltage and run tests from
your computer with a simple click and
execute process
•Capture and display data in real-time
•Retrieve data from the instrument’s
memory:
•Over 1500 insulation resistance
measurements
•Over 4000 resistance measurements
•Display DAR and PI ratios
•Plot graphs of manual and timed tests
•Include your analysis comments section
with the report
•Store a library of setups for different
applications
•Certification of results through report
generation
•Free updates are available on our website
www.aemc.com
Configure all functions of the Megohmmeter Models 1060, 5060, 5070, 6550 & 6555
Typical DataView® Functional Displays
Data Analysis and Reporting Software for Megohmmeters
