Europe: +49 / 7731 8399 0 | Email: info@meder.com Item No.: USA: +1 / 508 295 0771 | Email: salesusa@meder.com Asia: +852 / 2955 1682 | Email: salesasia@meder.com 3315172371 Item: SIL15-1A72-71Q Conditions Coil Data at 20 C Coil resistance Coil voltage Rated power Coil current Thermal resistance Inductance Pull-In voltage Drop-Out voltage = Contact rating Switching voltage Switching current Carry current Contact resistance static Insulation resistance Breakdown voltage Operate time incl. bounce Release time Capacity Special Product Data Dielectric Strength Coil/Contact Insulation resistance Coil/Contact Capacity Coil/Contact Housing material Connection pins Magnetic Shield Approval Reach / RoHS conformity Typ Max Unit Min Typ Max Unit operating temperature + self heating Conditions Contact data 66/3 Min !" #$ $" "% & not to exceed their individual max.'s DC or Peak AC DC or Peak AC DC or Peak AC ' ( ) *$ Start Value + , "- ) $- RH <45 %, 100 V test voltage according to IEC 255-5 measured with 40% overdrive measured with no coil excitation @ 10 kHz across open switch . ( ( / Conditions Min according to EN 60255-5 RH <45%, 200 VDC measuring voltage @ 10 kHz Typ Max Unit 0 . / epoxy resin CuFe2P, tin plated yes UL-File No. NRNT2.E156887 / NRNT8.E156887 yes Modifications in the sense of technical progress are reserved Designed at: 07.04.05 Designed by: KMUELLER Approval at: 30.10.09 Approval by: KOLBRICH Last Change at: 22.09.11 Last Change by: THAUKE Approval at: 22.09.11 Approval by: CRUF Version: 3 Europe: +49 / 7731 8399 0 | Email: info@meder.com Item No.: USA: +1 / 508 295 0771 | Email: salesusa@meder.com Asia: +852 / 2955 1682 | Email: salesasia@meder.com 3315172371 Item: SIL15-1A72-71Q Environmental data Shock Vibration Operating temperature Storage temperature Soldering temperature Washability Conditions Min 3 3 wave soldering max. 5 sec. Max 4 5 Unit 1 1 2 2 2 fully sealed Conditions General data Typ 1/2 sine, duration 11ms, in 3 axis from 10 - 2000 Hz Min Total weigth Packaging Typ Max + tube per 25 pcs. Unit 1 Modifications in the sense of technical progress are reserved Designed at: 07.04.05 Designed by: KMUELLER Approval at: 30.10.09 Approval by: KOLBRICH Last Change at: 22.09.11 Last Change by: THAUKE Approval at: 22.09.11 Approval by: CRUF Version: 3