CREAT BY ART
UL Recognized File #E-326854
For surface mounted application
Metal silicon junction, majority carrier conduction
Low power loss, high efficiency
High current capability, low forward voltage drop
High Surge capability
Rating at 25 ℃ ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
Symbol Unit
VRRM V
VRMS V
VDC V
dV/dt V/uS
RθJC OC/W
TJOC
TSTG OC
Note2: Thermal Resistance from Junction to Case Per Leg
V
Maximum DC Reverse Current at Rated DC Blocking Voltage
TA=25 ℃
TA=125 ℃
IR
0.1
40
mA
mA
VF
0.75
0.70
1.05
A
Peak Forward Surge Current, 8.3 ms Single Half Sine-wave
Superimposed on Rated Load (JEDEC method) IFSM 250 A
Plastic material used carries Underwriters Laboratory
Classifications 94V-0
For use in low voltage, high frequency inverters,
, free wheeling, and polarity protection applications
High temperature soldering guaranteed: 260℃/
10 seconds at terminals
Maximum Average Forward Rectified Current
@Tc = 130℃
Mechanical Data
Polarity: As marked
Guarding for over voltage protection
Features
MBRS60XXCT = Specific Device Cod
e
G = Green Compound
Maximum Thermal Resistance Per Leg (Note 2)
Dimensions in inches and (millimeters)
MBRS6040CT
Note1: Pulse Test : 300us Pulse Width, 1% Duty cycle
-65 to + 175
10,000
-65 to + 150
IF(AV) 60
1
MBRS6040CT
D2PAK
Version:B11
Operating Temperature Range
Storage Temperature Range
Y = Year
60.0AMPS Surface Mount Schottk
y
Barrier Rectifie
r
Marking Diagram
Case: JEDEC D2PAK molded plastic
40
28
40
Maximum RMS Voltage
Maximum Repetitive Peak Reverse Voltage
Maximum DC blocking voltage
WW = Work Week
Terminals: Leads solderable per MIL-STD-750, Method 2026
Voltage rate of change (Rated VR)
Type Number
Maximum Ratings and Electrical Characteristi
c
Weight: 1.7 grams
Maximum Instantaneous Forward Voltage at (Note 1)
IF = 30A, TA=25℃
IF = 30A, TA=125℃
IF = 60A, TA=25℃
IF = 60A, TA=125℃0.98
Mounting position: Any
Pb
RoHS
COMPLIANCE
RoHS
COMPLIANCE
Version:B11
RATINGS AND CHARACTERISTIC CURVES (MBRS6040CT)
FIG.1 MAXIMUM FORWARD CURRENT
DERATING CURVE
0
5
10
15
20
25
30
0 25 50 75 100 125 150 175
CASE TEMPERATURE (℃)
AVERAGE FORWARD
CURRENT (A)
RESISTIVE OR
INDUCTIVE LOAD
FIG. 2 MAXIMUM NON-REPETITIVE FORWARD
SURGE CURRENT PER LEG
0
50
100
150
200
250
1 10 100
NUMBER OF CYCLES AT 60 Hz
PEAK FORWARD SURGE
CURRENT (A)
8.3ms Single Half Sine Wave
JEDEC Method
FIG. 4 TYPICAL REVERSE CHARACTERISTICS
PER LEG
0.001
0.01
0.1
1
10
100
0 20 40 60 80 100 120 140
PERCENT OF VR (%)
INSTANTANEOUS REVERSE
CURRENT.
(mA)
TA=25℃
TA=125℃
TA=75℃
FIG. 3 TYPICAL FORWARD CHARACTERISTICS
PER LEG
0.01
0.1
1
10
100
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 1.1 1.2
FORWARD VOLTAGE (V)
INSTANTANEOUS FORWARD
CURRENT (A)
Pulse Width-300uS
1% Dut
y
C
y
cl
e
TA=25℃
TA=125℃
FIG. 6 TYPICAL TRANSIENT THERMAL
IMPEDANCE PER LEG
0.1
1
10
100
0.01 0.1 1 10 100
T-PULSE DURATION(s)
TRANSIENT THERMAL
IMPEDANCE(℃/ W)
FIG. 5 TYPICAL JUNCTION CAPACITANCE
100
1000
10000
0.1 1 10 100
REVERSE VOLTAGE (V)
JUNCTION CAPACITANCE (pF)
TA=25℃
f=1.0MHz
Vsig=50mVp-p