LM1877 www.ti.com SNAS550B - FEBRUARY 1995 - REVISED APRIL 2013 LM1877 Dual Audio Power Amplifier Check for Samples: LM1877 FEATURES DESCRIPTION * * * * * * * * The LM1877 is a monolithic dual power amplifier designed to deliver 2W/channel continuous into 8 loads. The LM1877 is designed to operate with a low number of external components, and still provide flexibility for use in stereo phonographs, tape recorders and AM-FM stereo receivers. Each power amplifier is biased from a common internal regulator to provide high power supply rejection, and output Q point centering. The LM1877 is internally compensated for all gains greater than 10. 1 2 2W/Channel -65 dB Ripple Rejection, Output Referred -65 dB Channel Separation, Output Referred Wide Supply Range, 6V-24V Very Low Cross-Over Distortion Low Audio Band Noise AC Short Circuit Protected Internal Thermal Shutdown APPLICATIONS * * * * * * * Multi-Channel Audio Systems Stereo Phonographs Tape Recorders and Players AM-FM Radio Receivers Servo Amplifiers Intercom Systems Automotive Products Connection Diagram Figure 1. 14-Pin SOIC or PDIP (Top View) See NPA0014B or NFF0014A Package 1 2 Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. All trademarks are the property of their respective owners. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright (c) 1995-2013, Texas Instruments Incorporated LM1877 SNAS550B - FEBRUARY 1995 - REVISED APRIL 2013 www.ti.com Equivalent Schematic Diagram These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates. Absolute Maximum Ratings (1) (2) Supply Voltage 26V Input Voltage 0.7V Operating Temperature 0C to +70C -65C to +150C Storage Temperature Junction Temperature Lead Temperature 150C PDIP Package Soldering (10 sec.) 260C SOIC Package Infrared (15 sec.) 220C SOIC Package Vapor Phase (60 sec.) Thermal Resistance (1) (2) 2 215C JC (PDIP Package) 30C/W JA (PDIP Package) 79C/W JC (SOIC Package) 27C/W JA (SOIC Package) 114C/W Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device is functional, but do not ensure specific performance limits. If Military/Aerospace specified devices are required, please contact the Texas Instruments Sales Office/Distributors for availability and specifications. Submit Documentation Feedback Copyright (c) 1995-2013, Texas Instruments Incorporated Product Folder Links: LM1877 LM1877 www.ti.com SNAS550B - FEBRUARY 1995 - REVISED APRIL 2013 Electrical Characteristics VS = 20V, TA = 25C (1) RL = 8, AV = 50 (34 dB) unless otherwise specified Parameter Conditions Total Supply Current PO = 0W Output Power THD = 10% LM1877 VS = 20V, RL = 8 Min LM1877 Max Units 25 50 mA 2.0 VS = 12V, RL = 8 Total Harmonic Distortion Typ W/Ch 1.3 W/Ch PO = 50 mW/Channel 0.075 % PO = 500 mW/Channel 0.045 % f = 1 kHz, VS = 14V PO = 1 W/Channel 0.055 % Output Swing RL = 8 VS -6 Vp-p Channel Separation CF = 50 F, CIN = 0.1 F, -70 dB -60 dB -65 dB -40 dB 2.5 V RS = 0, CN = 0.1 F, AV 200 0.80 mV RS = 0, f = 100 kHz, RL = 8 70 dB Input Offset Voltage 15 mV Input Bias Current 50 nA f = 1 kHz, Output Referred VS = 20V, VO = 4 Vrms -50 VS = 7V, VO = 0.5 Vrms PSRR Power Supply CF = 50 F, CIN = 0.1 F, Rejection Ratio f = 120 Hz, Output Referred VS = 20V, VRIPPLE = 1 Vrms -50 VS = 7V, VRIPPLE = 0.5 Vrms Noise Equivalent Input Noise RS = 0, CIN = 0.1 F, BW = 20 Hz-20 kHz, Output Noise Wideband Open Loop Gain Input Impedance Open Loop DC Output Level VS = 20V 4 9 Slew Rate 10 M 11 V 2.0 V/s Power Bandwidth 65 kHz Current Limit 1.0 A (1) For operation at ambient temperature greater than 25C, the LM1877 must be derated based on a maximum 150C junction temperature. Submit Documentation Feedback Copyright (c) 1995-2013, Texas Instruments Incorporated Product Folder Links: LM1877 3 LM1877 SNAS550B - FEBRUARY 1995 - REVISED APRIL 2013 www.ti.com Typical Performance Characteristics 4 Device Dissipation vs Ambient Temperature Power Supply Rejection Ratio (Referred to the Output) vs Frequency Figure 2. Figure 3. Power Supply Rejection Ratio (Referred to the Output) vs Frequency Power Supply Rejection Ratio (Referred to the Output) vs Supply Voltage Figure 4. Figure 5. Channel Separation (Referred to the Output) vs Frequency Channel Separation (Referred to the Output) vs Frequency Figure 6. Figure 7. Submit Documentation Feedback Copyright (c) 1995-2013, Texas Instruments Incorporated Product Folder Links: LM1877 LM1877 www.ti.com SNAS550B - FEBRUARY 1995 - REVISED APRIL 2013 Typical Performance Characteristics (continued) Average Supply Current vs POUT Total Harmonic Distortion vs Frequency Figure 8. Figure 9. Total Harmonic Distortion vs Frequency Power Dissipation (W) Both Channels Operating Figure 10. Figure 11. Open Loop Gain vs Frequency Output Swing vs Supply Voltage Figure 12. Figure 13. Submit Documentation Feedback Copyright (c) 1995-2013, Texas Instruments Incorporated Product Folder Links: LM1877 5 LM1877 SNAS550B - FEBRUARY 1995 - REVISED APRIL 2013 www.ti.com Typical Applications Figure 14. Stereo Phonograph Amplifier with Bass Tone Control 6 Submit Documentation Feedback Copyright (c) 1995-2013, Texas Instruments Incorporated Product Folder Links: LM1877 LM1877 www.ti.com SNAS550B - FEBRUARY 1995 - REVISED APRIL 2013 Figure 15. Frequency Response of Bass Tone Control Figure 16. Inverting Unity Gain Amplifier Figure 17. Stereo Amplifier with AV = 200 Submit Documentation Feedback Copyright (c) 1995-2013, Texas Instruments Incorporated Product Folder Links: LM1877 7 LM1877 SNAS550B - FEBRUARY 1995 - REVISED APRIL 2013 www.ti.com Figure 18. Non-Inverting Amplifier Using Split Supply 8 Figure 19. Typical Split Supply Submit Documentation Feedback Copyright (c) 1995-2013, Texas Instruments Incorporated Product Folder Links: LM1877 LM1877 www.ti.com SNAS550B - FEBRUARY 1995 - REVISED APRIL 2013 REVISION HISTORY Changes from Revision A (April 2013) to Revision B * Page Changed layout of National Data Sheet to TI format ............................................................................................................ 7 Submit Documentation Feedback Copyright (c) 1995-2013, Texas Instruments Incorporated Product Folder Links: LM1877 9 PACKAGE OPTION ADDENDUM www.ti.com 6-Feb-2020 PACKAGING INFORMATION Orderable Device Status (1) LM1877MX-9/NOPB ACTIVE Package Type Package Pins Package Drawing Qty SOIC NPA 14 1000 Eco Plan Lead/Ball Finish MSL Peak Temp (2) (6) (3) Green (RoHS & no Sb/Br) SN Level-3-260C-168 HR Op Temp (C) Device Marking (4/5) 0 to 70 LM1877M -9 (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may reference these types of products as "Pb-Free". RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption. Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of <=1000ppm threshold. Antimony trioxide based flame retardants must also meet the <=1000ppm threshold requirement. (3) MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. (4) There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device. (5) Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation of the previous line and the two combined represent the entire Device Marking for that device. (6) Lead/Ball Finish - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead/Ball Finish values may wrap to two lines if the finish value exceeds the maximum column width. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 1 Samples PACKAGE MATERIALS INFORMATION www.ti.com 8-Apr-2013 TAPE AND REEL INFORMATION *All dimensions are nominal Device LM1877MX-9/NOPB Package Package Pins Type Drawing SOIC NPA 14 SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) 1000 330.0 16.4 Pack Materials-Page 1 10.9 B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant 9.5 3.2 12.0 16.0 Q1 PACKAGE MATERIALS INFORMATION www.ti.com 8-Apr-2013 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) LM1877MX-9/NOPB SOIC NPA 14 1000 367.0 367.0 38.0 Pack Materials-Page 2 MECHANICAL DATA NPA0014B www.ti.com IMPORTANT NOTICE AND DISCLAIMER TI PROVIDES TECHNICAL AND RELIABILITY DATA (INCLUDING DATASHEETS), DESIGN RESOURCES (INCLUDING REFERENCE DESIGNS), APPLICATION OR OTHER DESIGN ADVICE, WEB TOOLS, SAFETY INFORMATION, AND OTHER RESOURCES "AS IS" AND WITH ALL FAULTS, AND DISCLAIMS ALL WARRANTIES, EXPRESS AND IMPLIED, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY RIGHTS. These resources are intended for skilled developers designing with TI products. You are solely responsible for (1) selecting the appropriate TI products for your application, (2) designing, validating and testing your application, and (3) ensuring your application meets applicable standards, and any other safety, security, or other requirements. These resources are subject to change without notice. TI grants you permission to use these resources only for development of an application that uses the TI products described in the resource. Other reproduction and display of these resources is prohibited. No license is granted to any other TI intellectual property right or to any third party intellectual property right. TI disclaims responsibility for, and you will fully indemnify TI and its representatives against, any claims, damages, costs, losses, and liabilities arising out of your use of these resources. TI's products are provided subject to TI's Terms of Sale (www.ti.com/legal/termsofsale.html) or other applicable terms available either on ti.com or provided in conjunction with such TI products. TI's provision of these resources does not expand or otherwise alter TI's applicable warranties or warranty disclaimers for TI products. Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright (c) 2020, Texas Instruments Incorporated