To our custo mers,
Old Company Name in Catalogs and Other Documents
On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology
Corporation, and Renesas Electronics Corpor ation took over all the business of both
companies. Therefore, althoug h the old com pany name remains in this docum ent, it is a valid
Renesas Electronics document. W e appreciate your understanding.
Renesas Electronics website: http://www.renesas.com
April 1st, 2010
Renesas Electronics Corporation
Issued by: Renesas Electronics Corporation (http://www.renesas.com)
Send any inquiries to http://www.renesas.com/inquiry.
Notice
1. All information included in this document is current as of the date this document is issued. Such information, however, is
subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please
confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to
additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website.
2. Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights
of third parties by or arising from the use of Renesas Electronics products or technical information described in this document.
No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights
of Renesas Electronics or others.
3. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part.
4. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of
semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software,
and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by
you or third parties arising from the use of these circuits, software, or information.
5. When exporting the products or technology described in this document, you should comply with the applicable export control
laws and regulations and follow the procedures required by such laws and regulations. You should not use Renesas
Electronics products or the technology described in this document for any purpose relating to military applications or use by
the military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and
technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited
under any applicable domestic or foreign laws or regulations.
6. Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics
does not warrant that such information is error free. Ren esas E lectronics assumes no liability whatsoever for any da mages
incurred by you resulting from errors in or omissions from the information included herein.
7. Renesas Electronics products are classified acco rding to the following three quality grades: “Standard”, “High Quality”, and
“Specific”. The recommended applications for each Renesas Electronics product depends on the product’s quality grade, as
indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular
application. You may not use any Renesas Electronics product for any application categorized as “Specific” without the prior
written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for
which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way
liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an
application categorized as “Specific” or for which the product is not intended where you have failed to obtain the prior written
consent of Renesas Electronics. The quality grade of each Renesas Electronics product is “Standard” unless otherwise
expressly specified in a Renesas Electronics data sheets or data books, et c.
“Standard”: Computers; office equipment; communications equipment; test and measurement equipment; audio and visual
equipment; home electro nic app liances; machine tool s; p ersonal electron ic equipment; and indu strial robots .
“High Quality”: Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti-
crime systems; safety equipment; and medical equipment not specifically designed for life support.
“Specific”: Aircraft; aerospace equ i pment; submersible repeaters; nu clear reactor control systems; medical equipment or
systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare
interven tion (e.g. excision, et c.), and any oth er applications or purposes that pose a direct th reat to human life.
8. You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics,
especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation
characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or
damages arising out of the use of Renesas Electronics products beyond such specified ranges.
9. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have
specific chara cterist ics such as the o ccurren ce of failure at a certai n rate an d malfunct ion s under certai n u se cond ition s. Further,
Renesas Electronics pr oducts are not subject to radiation resi stance design. Please be sure to implement safety measures to
guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a
Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire
control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because
the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system
manufactured by you.
10. Please contact a Renesas Electronics sales office for det ai ls as to enviro nmental matters such as the en vi ronmental
compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable
laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS
Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with
applicable laws and regulations.
11. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas
Electronics.
12. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this
document or Renesas Electronics products, or if you have any other inquiries.
(Note 1) “Renesas Electronics” as us ed in this document means Renesas Electronics Corporation and also includes its majo ri ty-
owned subsidiaries.
(Note 2) “Renesas Electronics product(s)” means any product developed or manufactured by or for Renesas Electronics.
REJ03G1568-0100 Rev.1.00 Jul 04, 200 7
Page 1 of 7
RQA0005MXAQS
Silicon N-Channel MOS FET REJ03G1568-0100
Rev.1.00
Jul 04, 2007
Features
• High Output Powe r, Hi gh Gain, Hig h Efficiency
Pout = +33 dBm, Linear Gain = 21 dB, PAE = 68% (f = 520 MHz)
• Compact package capable of surface m ounting
Outline
1. Gate
2. Source
3. Drain
4. Source
1
3
2, 4
1
2
3
4
RENESAS Package code: PLZZ0004CA-A
(Package Name : UPAK )
R
Note: Marking is “MX”.
*UPAK is a trademark of Renesas Technology Corp.
Absolute Maximum Ratings
(Ta = 25°C)
Item Symbol Ratings Unit
Drain to source voltage VDSS 16 V
Gate to source voltage VGSS ±5 V
Drain current ID 0.8 A
Channel dissipation Pchnote 9 W
Channel temperature Tch 150 °C
Storage temperature Tstg –50 to +150 °C
Note: Value at Tc = 25°C
This device is sensitive to electro static discha rge. An adequate careful handling procedure is requested.
RQA0005MXAQS
REJ03G1568-0100 Rev.1.00 Jul 04, 200 7
Page 2 of 7
Electrical Characteristics
(Ta = 25°C)
Item Symbol Min. Typ Max. Unit Test Conditions
Zero gate voltage drain current IDSS — — 10 µA VDS = 16 V, VGS = 0
Gate to source leakage current IGSS — — ±2 µA VGS = ±5 V, VDS = 0
Gate to source cutoff voltage VGS(off) 0.15 0.45 0.75 V VDS = 6 V, ID = 1mA
Forward Transfer Admittance |yfs| — 1.1 — S VDS = 6 V, ID = 600mA
Input capacitance Ciss — 22 — pF VGS = 5 V, VDS = 0, f = 1 MHz
Output capacitance Coss — 12 — pF VDS = 6 V, VGS = 0, f = 1 MHz
Reverse transfer capacitance Crss — 2.6 — pF VDG = 6 V, VGS = 0, f = 1 MHz
Output Power Pout — 33 — dBm
— 2 — W
Power Added Efficiency PAE — 68 — %
VDS = 6V, IDQ = 200 mA
f = 520 MHz, Pin = +20 dBm
Main Characteristics
Maximum Channel Power
Dissipation Curve
0 50 100
Case Temperature T
C
(°C)
150 200
0
Channel Power Dissipation Pch (W)
2
4
6
10
0
0.0
0.4
0.6
0.8
1.0
1.2
|yfs|
ID
0.2
Gate to Source Voltage V
GS
(V)
Typical Transfer Characterisitics
Drain Current ID (A)
Forward Transfer Admittance |yfs| (S)
Darin to Source Voltage V
DS
(V)
Drain Current ID (A)
Typical Output Characteristics
0.0
0.5
1.0
1.5
2.0
2.5
Pulse Test
3.0
1.5 V
2.0 V
2.5 V
3.0 V
3.5 V
VGS = 1.0 V
0.1
1.0
10.0
Drain Current I
D
(A)
Forward Transfer Admittance |yfs| (S)
Forward Transfer Admittance
vs. Drain Current
8
VDS = 6 V
Pulse Test
1.60.4 0.8 1.2 2.0 0.1 1.0 10.0
VDS = 6 V
Pulse Test
0246810
RQA0005MXAQS
REJ03G1568-0100 Rev.1.00 Jul 04, 200 7
Page 3 of 7
Reverse Transfer Capacitance vs.
Drain to Gate Voltage
Reverse Transfer Capacitance Crss (pF)
Drain to Gate Voltage V
DG
(V)
0.1 1 10
0.1
1
10
VGS = 0
f = 1 MHz
0 1000 2500
-20
-10
30
0
10
20
500 1500 2000
Maximum Stable Gain, |S21|
2
vs. Frequency
Maximum Stable Gain MSG (dB)
Forward Transfer Coefficient |S21|
2
(dB)
Frequency f (MHz)
VDS = 6 V
ID = 200 mA
MSG
|S21|2
-5 -1 5
5
10
30
15
20
25
-3 1 3
Input Capacitance vs.
Gate to Source Voltage
Input Capacitance Ciss (pF)
Gate to Source Voltage V
GS
(V)
0.1 10
1
100
10
1
Output Capacitance vs.
Drain to Source Voltage
Output Capacitance Coss (pF)
Drain to Source Voltage V
DS
(V)
-4 -2 0 2 4
VDS = 0
f = 1 MHz VGS = 0
f = 1 MHz
0.5
Maximum Stable Gain, |S21|
2
vs. Drain Current
Maximum Stable Gain MSG (dB)
Forward Transfer Coefficient |S21|
2
(dB)
0 0.2
0
5
25
10
15
20
0.1 0.3 0.4
Drain Current I
D
(A)
VDS = 6 V
f = 500 MHz
MSG
|S21|2
RQA0005MXAQS
REJ03G1568-0100 Rev.1.00 Jul 04, 200 7
Page 4 of 7
Evaluation Circuit (f = 520 MHz)
OUT
IN
VG VD
C1
C2
C3
C4
C6
C10
C7
L2
L1
L3
R1
50 Ω
50 Ω
C11
C9
C8
R2
C5
Micro strip line width = 2.2 mm / 50 Ω, εr 3.6C1, C8
C2
C3, C9
C4, C10
C5, C11
C6
C7
L1
L2
L3
R1
R2
68 pF Chip Capacitor
16 pF Chip Capacitor
100 pF Chip Capacitor
1000 pF Chip Capacitor
2.2 µF Electrolysis Capacitor
4 pF Chip Capacitor
11 pF Chip Capacitor
8 Turns D: 0.5 mm, φ 2.4 mm Enamel Wire
2.2 nH Chip Inductor
3.3 nH Chip Inductor
33 Ω Chip Resistor
2.7 kΩ Chip Resistor
RQA0005MXAQS
REJ03G1568-0100 Rev.1.00 Jul 04, 200 7
Page 5 of 7
Frequency f (MHz)
450 470 490 510 530 550
Power Gain PG (dB)
Power Gain, Powe Added Efficiency
vs. Frequency
Input Return Loss vs. Frequency
Input Return Loss RL (dB)
470 490 510 530 550
Frequency f (MHz)
450
V
DS
= 6V
I
DQ
= 200 mA
Pin = 20 dBm
Power Gain PG (dB)
Idling Current I
DQ
(A)
0 0.1 0.2 0.3 0.50.4
Power Gain, Power Added Efficiency
vs. Idling Current
Power Added Efficiency PAE (%)
V
DS
= 6 V
f = 520 MHz
Pin = 20 dBm
0
5
20
15
10
60
65
80
75
70
Power Gain, Power Added Efficiency
vs. Drain to Source Voltage
Power Gain PG (dB)
Drain to Source Voltage V
DS
(V)
Power Added Efficiency PAE (%)
0
10
20
40
60
f = 520 MHz
I
DQ
= 200 mA
Pin = 20 dBm
80
15
550
70
5678
PG
PAE
3
Power Gain, Power Added Efficiency
vs. Input Power
Power Gain PG (dB)
Input Power Pin (dBm)
Power Added Efficiency PAE (%)
0
10
20
30
40
0
20
40
60
80
V
DS
= 6 V
f = 520 MHz
I
DQ
= 200 mA
0 5 15 2010
Output Power, Drain Current
vs. Input Power
Output Power Pout (dBm)
Input Power Pin (dBm)
Drain Current I
D
(A)
0
10
20
40
0.2
0.4
0.6
ID
Pout
0 5 15 2010
30 0.5
0.3
Power Added Efficiency PAE (%)
0
40
80
20
60
0
10
20
5
15
PG
PAE
-20
-15
-5
-10
0
PAE
PG
V
DS
= 6 V
I
DQ
= 200 mA
Pin = 20 dBm
PG
PAE
4
25
V
DS
= 6 V
f = 520 MHz
I
DQ
= 200 mA
25
RQA0005MXAQS
REJ03G1568-0100 Rev.1.00 Jul 04, 200 7
Page 6 of 7
S Parameter
(VDS = 6 V, IDQ = 200 mA, Zo = 50 Ω)
S11 S21 S12 S22
f (MHz) MAG ANG (deg.) MAG ANG (deg.) MAG ANG (deg.) MAG ANG (deg.)
100 0.843 -136.4 12.72 104.1 0.037 -5.7 0.765 -150.7
150 0.863 -154.9 11.92 89.1 0.037 -6.3 0.727 -162.2
200 0.853 -161.8 9.13 79.6 0.037 -7.4 0.728 -166.8
250 0.847 -167.1 7.38 72.5 0.037 -13.4 0.730 -170.8
300 0.844 -170.8 6.16 66.1 0.037 -19.0 0.733 -173.5
350 0.843 -173.7 5.27 60.0 0.037 -24.0 0.734 -175.5
400 0.841 -176.2 4.59 54.2 0.037 -29.2 0.735 -177.3
450 0.840 -178.2 4.08 48.7 0.037 -33.6 0.736 -178.8
500 0.841 180.0 3.65 43.3 0.036 -38.4 0.738 180.0
550 0.842 178.4 3.31 37.9 0.036 -42.7 0.741 178.8
600 0.843 176.9 3.02 32.6 0.035 -47.0 0.743 177.8
650 0.844 175.6 2.78 27.5 0.035 -51.4 0.746 176.9
700 0.845 174.3 2.56 22.2 0.035 -55.3 0.746 176.0
750 0.844 173.1 2.38 17.1 0.034 -59.6 0.748 174.9
800 0.845 171.8 2.21 12.0 0.034 -63.9 0.750 174.0
850 0.845 170.6 2.07 6.9 0.033 -67.9 0.753 173.2
900 0.848 169.5 1.94 1.9 0.033 -71.9 0.755 172.4
950 0.851 168.4 1.83 -3.1 0.032 -76.0 0.758 171.4
1000 0.853 167.4 1.73 -8.0 0.032 -79.8 0.760 170.5
1050 0.856 166.4 1.64 -12.9 0.031 -83.8 0.764 169.7
1100 0.858 165.5 1.55 -17.7 0.031 -87.6 0.765 168.7
1150 0.860 164.5 1.47 -22.5 0.030 -91.4 0.769 167.8
1200 0.861 163.5 1.40 -27.4 0.030 -95.3 0.774 166.9
1250 0.862 162.5 1.33 -32.1 0.029 -98.9 0.778 166.1
1300 0.864 161.5 1.27 -37.0 0.029 -102.6 0.780 165.3
1350 0.865 160.5 1.21 -41.8 0.028 -106.3 0.784 164.4
1400 0.867 159.4 1.16 -46.6 0.028 -109.9 0.789 163.5
1450 0.868 158.5 1.11 -51.3 0.027 -113.4 0.792 162.8
1500 0.871 157.5 1.06 -56.0 0.027 -116.7 0.794 161.9
1550 0.874 156.6 1.02 -60.6 0.026 -120.2 0.796 161.1
1600 0.876 155.7 0.98 -65.4 0.025 -123.4 0.799 160.2
1650 0.878 154.8 0.94 -70.1 0.025 -126.8 0.801 159.3
1700 0.879 154.0 0.91 -74.8 0.024 -130.3 0.803 158.5
1750 0.879 153.2 0.88 -79.3 0.024 -133.2 0.805 157.4
1800 0.880 152.4 0.85 -83.8 0.023 -136.4 0.808 156.4
1850 0.882 151.5 0.82 -88.2 0.023 -139.6 0.812 155.5
1900 0.886 150.2 0.79 -92.7 0.022 -142.7 0.814 154.5
1950 0.888 148.9 0.76 -97.3 0.022 -146.0 0.818 153.4
2000 0.890 147.8 0.74 -101.7 0.021 -149.0 0.820 152.5
2050 0.893 146.8 0.71 -106.2 0.021 -151.9 0.825 151.7
2100 0.897 145.9 0.69 -110.6 0.020 -155.0 0.826 150.7
2150 0.900 145.0 0.67 -115.2 0.020 -157.7 0.829 149.6
2200 0.902 144.1 0.65 -119.7 0.019 -160.4 0.832 148.6
2250 0.904 143.3 0.63 -124.1 0.019 -163.0 0.837 147.8
2300 0.904 142.5 0.61 -128.6 0.019 -165.3 0.839 146.9
2350 0.904 141.7 0.59 -133.0 0.018 -168.3 0.839 145.9
2400 0.903 140.9 0.57 -137.5 0.018 -170.7 0.841 144.8
2450 0.901 139.9 0.55 -142.0 0.018 -173.1 0.843 144.0
2500 0.898 138.9 0.54 -146.5 0.017 -175.5 0.842 143.0
RQA0005MXAQS
REJ03G1568-0100 Rev.1.00 Jul 04, 200 7
Page 7 of 7
Package Dimensions
4.5 ± 0.1
1.8 Max 1.5 ± 0.1
0.44 Max
0.44 Max
0.48 Max
0.53 Max
1.5 1.5
3.0
2.5 ± 0.1
4.25 Max
0.8 Min
φ1
0.4
(1.5)
(2.5)
(0.4)
(0.2)
Package Name
PLZZ0004CA-A UPAK / UPAKV
MASS[Typ.]
0.050g
SC-62
RENESAS CodeJEITA Package Code
Unit: mm
Ordering Information
Part Name Quantity Shipping Container
RQA0005MXTL-E 1000 pcs. φ178 mm reel, 12 mm emboss taping
Note: For some grades, production may be terminated. Please contact the Renesas sales office to check the state of
production before ordering the product.
Notes:
1. This document is provided for reference purposes only so that Renesas customers may select the appropriate Renesas products for their use. Renesas neither makes
warranties or representations with respect to the accuracy or completeness of the information contained in this document nor grants any license to any intellectual property
rights or any other rights of Renesas or any third party with respect to the information in this document.
2. Renesas shall have no liability for damages or infringement of any intellectual property or other rights arising out of the use of any information in this document, including,
but not limited to, product data, diagrams, charts, programs, algorithms, and application circuit examples.
3. You should not use the products or the technology described in this document for the purpose of military applications such as the development of weapons of mass
destruction or for the purpose of any other military use. When exporting the products or technology described herein, you should follow the applicable export control laws
and regulations, and procedures required by such laws and regulations.
4. All information included in this document such as product data, diagrams, charts, programs, algorithms, and application circuit examples, is current as of the date this
document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas products listed in this document,
please confirm the latest product information with a Renesas sales office. Also, please pay regular and careful attention to additional and different information to be
disclosed by Renesas such as that disclosed through our website. (http://www.renesas.com )
5. Renesas has used reasonable care in compiling the information included in this document, but Renesas assumes no liability whatsoever for any damages incurred as a
result of errors or omissions in the information included in this document.
6. When using or otherwise relying on the information in this document, you should evaluate the information in light of the total system before deciding about the applicability
of such information to the intended application. Renesas makes no representations, warranties or guaranties regarding the suitability of its products for any particular
application and specifically disclaims any liability arising out of the application and use of the information in this document or Renesas products.
7. With the exception of products specified by Renesas as suitable for automobile applications, Renesas products are not designed, manufactured or tested for applications
or otherwise in systems the failure or malfunction of which may cause a direct threat to human life or create a risk of human injury or which require especially high quality
and reliability such as safety systems, or equipment or systems for transportation and traffic, healthcare, combustion control, aerospace and aeronautics, nuclear power, or
undersea communication transmission. If you are considering the use of our products for such purposes, please contact a Renesas sales office beforehand. Renesas shall
have no liability for damages arising out of the uses set forth above.
8. Notwithstanding the preceding paragraph, you should not use Renesas products for the purposes listed below:
(1) artificial life support devices or systems
(2) surgical implantations
(3) healthcare intervention (e.g., excision, administration of medication, etc.)
(4) any other purposes that pose a direct threat to human life
Renesas shall have no liability for damages arising out of the uses set forth in the above and purchasers who elect to use Renesas products in any of the foregoing
applications shall indemnify and hold harmless Renesas Technology Corp., its affiliated companies and their officers, directors, and employees against any and all
damages arising out of such applications.
9. You should use the products described herein within the range specified by Renesas, especially with respect to the maximum rating, operating supply voltage range,
movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas shall have no liability for malfunctions or damages
arising out of the use of Renesas products beyond such specified ranges.
10. Although Renesas endeavors to improve the quality and reliability of its products, IC products have specific characteristics such as the occurrence of failure at a certain
rate and malfunctions under certain use conditions. Please be sure to implement safety measures to guard against the possibility of physical injury, and injury or damage
caused by fire in the event of the failure of a Renesas product, such as safety design for hardware and software including but not limited to redundancy, fire control and
malfunction prevention, appropriate treatment for aging degradation or any other applicable measures. Among others, since the evaluation of microcomputer software
alone is very difficult, please evaluate the safety of the final products or system manufactured by you.
11. In case Renesas products listed in this document are detached from the products to which the Renesas products are attached or affixed, the risk of accident such as
swallowing by infants and small children is very high. You should implement safety measures so that Renesas products may not be easily detached from your products.
Renesas shall have no liability for damages arising out of such detachment.
12. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written approval from Renesas.
13. Please contact a Renesas sales office if you have any questions regarding the information contained in this document, Renesas semiconductor products, or if you have
any other inquiries.
Sales Strategic Planning Div. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan
http://www.renesas.com
Refer to "http://www.renesas.com/en/network" for the latest and detailed information.
Renesas Technology America, Inc.
450 Holger Way, San Jose, CA 95134-1368, U.S.A
Tel: <1> (408) 382-7500, Fax: <1> (408) 382-7501
Renesas Technology Europe Limited
Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K.
Tel: <44> (1628) 585-100, Fax: <44> (1628) 585-900
Renesas Technology (Shanghai) Co., Ltd.
Unit 204, 205, AZIACenter, No.1233 Lujiazui Ring Rd, Pudong District, Shanghai, China 200120
Tel: <86> (21) 5877-1818, Fax: <86> (21) 6887-7898
Renesas Technology Hong Kong Ltd.
7th Floor, North Tower, World Finance Centre, Harbour City, 1 Canton Road, Tsimshatsui, Kowloon, Hong Kong
Tel: <852> 2265-6688, Fax: <852> 2730-6071
Renesas Technology Taiwan Co., Ltd.
10th Floor, No.99, Fushing North Road, Taipei, Taiwan
Tel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999
Renesas Technology Singapore Pte. Ltd.
1 Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632
Tel: <65> 6213-0200, Fax: <65> 6278-8001
Renesas Technology Korea Co., Ltd.
Kukje Center Bldg. 18th Fl., 191, 2-ka, Hangang-ro, Yongsan-ku, Seoul 140-702, Korea
Tel: <82> (2) 796-3115, Fax: <82> (2) 796-2145
Renesas Technology Malaysia Sdn. Bhd
Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No.18, Jalan Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia
Tel: <603> 7955-9390, Fax: <603> 7955-9510
RENESAS SALES OFFICES
© 2007. Renesas Technology Corp., All rights reserved. Printed in Japan.
Colophon .7.0
