October 2006 Rev 8 1/17
17
STB80NF55-06 - STB80NF55-06-1
STP80NF55-06 - STP80NF55-06FP
N-channel 55V - 0.005Ω - 80A - TO-220 /FP - I2PAK - D2PA K
STripFET™ II Power MOSFET
General features
■Exceptional dv/dt capability
■100% avalanche tested
■Application oriented characterization
Description
This Power MOSFET is the latest development of
STMicroelectronis unique "Single Feature Size™"
strip-based process. The resulting transistor
shows extremely high packing density for low on-
resistance, rugged avalanche characteristics and
less critical alignment steps therefore a
remarkable manufacturing reproducibility.
Applications
■Switching application
Internal schematic diagram
Type VDSS RDS(on) ID
STB80NF55-06 55V <0.0065Ω80A (1)
1. Limited by package
STB80NF55-06-1 55V <0.0065Ω80A(1)
STP80NF55-06 55V <0.0065Ω80A (1)
STP80NF55-06FP 55V <0.0065Ω60A (1)
123
TO-220 TO-220FP
D²PAK I²PAK
1
3
12
3
123
www.st.com
Order codes
Part number Marking Package Packaging
STB80NF55-06T4 B80NF55-06 D²PAK Tape & reel
STB80NF55-06-1 B80NF55-06-1 I²PAK Tube
STP80NF55-06 P80NF55-06 TO-220 Tube
STP80NF55-06FP P80NF55-06FP TO-220FP Tube
Contents STB80NF55-06 - STB80NF55-06-1 - STP80NF55-06 - STP80NF55-06FP
2/17
Contents
1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.1 Electrical characteristics (curves) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
3 Test circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
4 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
5 Packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
6 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
STB80NF55-06 - STB80NF55-06-1 - STP80NF55-06 - STP80NF55-06FP Electrical ratings
3/17
1 Electrical ratings
Table 1. Absolute maximum ratings
Symbol Parameter
Value
Unit
TO-220 / D²/ I²PAK TO-220FP
VDS Drain-source voltage (VGS = 0) 55 V
VGS Gate-source voltage ± 20 V
ID (1)
1. Limited by Package
Drain current (continuous) at TC = 25°C 80 60 (2)
2. Limited only by maximum temperature allowed
A
ID (1) Drain current (continuous) at TC=100°C 80 42 (2) A
IDM(3)
3. Pulse width limited by safe operating area
Drain current (pulsed) 320 240 (2) A
PTOT Total dissipation at TC = 25°C 300 45 W
Derating factor 2 0.30 W/°C
dv/dt (4)
4. ) ISD ≤ 80A, di/dt ≤ 400A/µs, VDD ≤ V(BR)DSS, Tj ≤ TJMAX
Peak diode recovery voltage slope 7 V/ns
EAS (5)
5. Starting TJ = 25 oC, ID = 40A, VDD = 45V
Single pulse avalanche energy 1.3 J
VISO Insulation withstand voltage (DC) -- 2500 V
TJ
Tstg
Operating junction temperature
Storage temperature -55 to 175 °C
Table 2. Thermal data
Symbol Parameter
Value
Unit
TO-220 / D²/ I²PAK TO-220FP
RthJC Thermal resistance junction-case max 0.5 3.33 °C/W
RthJA Thermal resistance junction-ambient max 62.5 °C/W
Tl
Maximum lead temperature for soldering
purpose 300 °C
Electrical characteristics STB80NF55-06 - STB80NF55-06-1 - STP80NF55-06 - STP80NF55-06FP
4/17
2 Electrical characteristics
(TCASE=25°C unless otherwise specified)
Table 3. On/off states
Symbol Parameter Test conditions Min. Typ. Max. Unit
V(BR)DSS Drain-source breakdown
voltage ID = 250µA, VGS= 0 55 V
IDSS
Zero gate voltage drain
current (VGS = 0)
VDS = Max rating,
VDS = Max rating @125°C
1
10
µA
µA
IGSS
Gate body leakage current
(VDS = 0) VGS = ±20V ±100 nA
VGS(th) Gate threshold voltage VDS= VGS, ID = 250µA 23 4V
RDS(on) Static drain-source on
resistance VGS= 10V, ID= 40A 0.005 0.0065 Ω
Table 4. Dynamic
Symbol Parameter Test conditions Min. Typ. Max. Unit
gfs (1)
1. Pulsed: pulse duration=300µs, duty cycle 1.5%
Forward transconductance VDS =15V, ID = 40A 150 S
Ciss
Coss
Crss
Input capacitance
Output capacitance
Reverse transfer
capacitance
VDS =25V, f=1 MHz, VGS=0
4400
1020
350
pF
pF
pF
Qg
Qgs
Qgd
Total gate charge
Gate-source charge
Gate-drain charge
VDD = 44V, ID = 80A
VGS =10V
142
29
60.5
189 nC
nC
nC
Table 5. Switching times
Symbol Parameter Test conditions Min. Typ. Max. Unit
td(on)
tr
td(off)
tf
Turn-on delay time
Rise time
Turn-off delay time
Fall time
VDD= 50 V, ID= 40A,
RG=4.7Ω, VGS=10V
(see Figure 15)
27
155
125
65
ns
ns
ns
ns
STB80NF55-06 - STB80NF55-06-1 - STP80NF55-06 - STP80NF55-06FP Electrical characteristics
5/17
Table 6. Source drain diode
Symbol Parameter Test conditions Min Typ. Max Unit
ISD Source-drain current 80 A
ISDM(1)
1. Pulse width limited by safe operating area
Source-drain current (pulsed) 320 A
VSD(2)
2. Pulsed: pulse duration=300µs, duty cycle 1.5%
Forward on voltage ISD=80A, VGS=0 1.5 V
trr
Qrr
IRRM
Reverse recovery time
Reverse recovery charge
Reverse recovery current
ISD=80A,
di/dt = 100A/µs,
VDD=35V, TJ = 150°C
100
0.32
6.5
ns
µC
A
Electrical characteristics STB80NF55-06 - STB80NF55-06-1 - STP80NF55-06 - STP80NF55-06FP
6/17
2.1 Electrical characteristics (curves)
Figure 1. Safe operating area for TO-220/
D² PAK/ I²PA K
Figure 2. Thermal impedance for TO-220/
D²PAK/ I²PAK
Figure 3. Safe operating area for TO-220FP Figure 4. Thermal impedance for TO-220FP
Figure 5. Output characterisics Figure 6. Transfer characteristics
STB80NF55-06 - STB80NF55-06-1 - STP80NF55-06 - STP80NF55-06FP Electrical characteristics
7/17
Figure 7. Transconductance Figure 8. Static drain-source on resistance
Figure 9. Gate charge vs gate-source voltage Figure 10. Capacitance variations
Figure 11. Normalized gate threshold voltage
vs temperature
Figure 12. Normalized on resistance vs
temperature
Electrical characteristics STB80NF55-06 - STB80NF55-06-1 - STP80NF55-06 - STP80NF55-06FP
8/17
Figure 13. Source-drain diode forward
characteristics
Figure 14. Normalized BVDSS vs temperature
STB80NF55-06 - STB80NF55-06-1 - STP80NF55-06 - STP80NF55-06FP Test circuit
9/17
3 Test circuit
Figure 15. Switching times test circuit for
resistive load
Figure 16. Gate charge test circuit
Figure 17. Test circuit for inductive load
switching and diode recovery times
Figure 18. Unclamped Inductive load test
circuit
Figure 19. Unclamped inductive waveform
Package mechanical data STB80NF55-06 - STB80NF55-06-1 - STP80NF55-06 - STP80NF55-06FP
10/17
4 Package mechanical data
In order to meet environmental requirements, ST offers these devices in ECOPACK®
packages. These packages have a Lead-free second level interconnect . The category of
second level interconnect is marked on the package and on the inner box label, in
compliance with JEDEC Standard JESD97. The maximum ratings related to soldering
conditions are also marked on the inner box label. ECOPACK is an ST trademark.
ECOPACK specifications are available at: www.st.com
STB80NF55-06 - STB80NF55-06-1 - STP80NF55-06 - STP80NF55-06FP Package mechanical data
11/17
DIM.
mm. inch
MIN. TYP MAX. MIN. TYP. MAX.
A 4.40 4.60 0.173 0.181
b 0.61 0.88 0.024 0.034
b1 1.15 1.70 0.045 0.066
c 0.49 0.70 0.019 0.027
D 15.25 15.75 0.60 0.620
E 10 10.40 0.393 0.409
e 2.40 2.70 0.094 0.106
e1 4.95 5.15 0.194 0.202
F 1.23 1.32 0.048 0.052
H1 6.20 6.60 0.244 0.256
J1 2.40 2.72 0.094 0.107
L 13 14 0.511 0.551
L1 3.50 3.93 0.137 0.154
L20 16.40 0.645
L30 28.90 1.137
øP 3.75 3.85 0.147 0.151
Q 2.65 2.95 0.104 0.116
TO-220 MECHANICAL DATA
Package mechanical data STB80NF55-06 - STB80NF55-06-1 - STP80NF55-06 - STP80NF55-06FP
12/17
TO-247 MECHANICAL DATA
1
DIM.
mm. inch
MIN. TYP MAX. MIN. TYP. MAX.
A 4.4 4.6 0.173 0.181
A1 2.49 2.69 0.098 0.106
A2 0.03 0.23 0.001 0.009
B 0.7 0.93 0.027 0.036
B2 1.14 1.7 0.044 0.067
C 0.45 0.6 0.017 0.023
C2 1.23 1.36 0.048 0.053
D 8.95 9.35 0.352 0.368
D1 8 0.315
E 10 10.4 0.393
E1 8.5 0.334
G 4.88 5.28 0.192 0.208
L 15 15.85 0.590 0.625
L2 1.27 1.4 0.050 0.055
L3 1.4 1.75 0.055 0.068
M 2.4 3.2 0.094 0.126
R0.4 0.015
V2 0º 4º
D2PAK MECHANICAL DATA
3
STB80NF55-06 - STB80NF55-06-1 - STP80NF55-06 - STP80NF55-06FP Package mechanical data
13/17
DIM.
mm. inch
MIN. TYP MAX. MIN. TYP. MAX.
A 4.40 4.60 0.173 0.181
A1 2.40 2.72 0.094 0.107
b 0.61 0.88 0.024 0.034
b1 1.14 1.70 0.044 0.066
c 0.49 0.70 0.019 0.027
c2 1.23 1.32 0.048 0.052
D 8.95 9.35 0.352 0.368
e 2.40 2.70 0.094 0.106
e1 4.95 5.15 0.194 0.202
E 10 10.40 0.393 0.410
L 13 14 0.511 0.551
L1 3.50 3.93 0.137 0.154
L2 1.27 1.40 0.050 0.055
TO-262 (I
2
PAK) MECHANICAL DATA
Package mechanical data STB80NF55-06 - STB80NF55-06-1 - STP80NF55-06 - STP80NF55-06FP
14/17
L2
A
B
D
E
H
G
L6
F
L3
G1
123
F2
F1
L7
L4
L5
DIM.
mm. inch
MIN. TYP MAX. MIN. TYP. MAX.
A 4.4 4.6 0.173 0.181
B 2.5 2.7 0.098 0.106
D 2.5 2.75 0.098 0.108
E 0.45 0.7 0.017 0.027
F 0.75 1 0.030 0.039
F1 1.15 1.7 0.045 0.067
F2 1.15 1.7 0.045 0.067
G 4.95 5.2 0.195 0.204
G1 2.4 2.7 0.094 0.106
H 10 10.4 0.393 0.409
L2 16 0.630
L3 28.6 30.6 1.126 1.204
L4 9.8 10.6 .0385 0.417
L5 2.9 3.6 0.114 0.141
L6 15.9 16.4 0.626 0.645
L7 9 9.3 0.354 0.366
Ø 3 3.2 0.118 0.126
TO-220FP MECHANICAL DATA
STB80NF55-06 - STB80NF55-06-1 - STP80NF55-06 - STP80NF55-06FP Packaging mechanical data
15/17
5 Packaging mechanical data
TAPE AND REEL SHIPMENT
D2PAK FOOTPRINT
* on sales type
DIM. mm inch
MIN. MAX. MIN. MAX.
A 330 12.992
B1.5 0.059
C 12.8 13.2 0.504 0.520
D20.2 0795
G 24.4 26.4 0.960 1.039
N100 3.937
T 30.4 1.197
BASE QTY BULK QTY
1000 1000
REEL MECHANICAL DATA
DIM. mm inch
MIN. MAX. MIN. MAX.
A0 10.5 10.7 0.413 0.421
B0 15.7 15.9 0.618 0.626
D 1.5 1.6 0.059 0.063
D1 1.59 1.61 0.062 0.063
E 1.65 1.85 0.065 0.073
F11.4 11.6 0.449 0.456
K0 4.8 5.0 0.189 0.197
P0 3.9 4.1 0.153 0.161
P1 11.9 12.1 0.468 0.476
P2 1.9 2.1 0.075 0.082
R 50 1.574
T 0.25 0.35 0.0098 0.0137
W23.7 24.3 0.933 0.956
TAPE MECHANICAL DATA
Revision history STB80NF55-06 - STB80NF55-06-1 - STP80NF55-06 - STP80NF55-06FP
16/17
6 Revision history
Table 7. Revision history
Date Revision Changes
21-Jun-2004 5Complete version
13-Mar-2005 6Package inserted: I2PA K
20-Jul-2006 7New template, no content change
24-Oct-2006 8Corrected value on Table 1.: Absolute maximum ratings
STB80NF55-06 - STB80NF55-06-1 - STP80NF55-06 - STP80NF55-06FP
17/17
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2006 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
