Technische Information / Technical Information Netz-Thyristor Phase Control Thyristor T 1219 N 20...28 N Elektrische Eigenschften / Electrical properties Hochstzulassige Werte / Maximum rated values Periodische Vorwarts- und Ruckwarts-Spitzensperrspannung repetitive peak forward off-state and reverse voltages T vj = - 40C...Tvj max VDRM , VRRM 2000 2400 2200 2600 2800 V V V Vorwarts-Stospitzensperrspannung non-repetitive peak foward off-state voltage T vj = - 40C...Tvj max VDSM 2000 2400 2200 2600 2800 V V V Ruckwarts-Stospitzensperrspannung non-repetitive peak reverse voltage T vj = + 25C...Tvj max VRSM 2100 2500 2300 2700 2900 V V V 2625 A Durchlastrom-Grenzeffektivwert RMSM on-state current Dauergrenzstrom average on-state current Stostrom-Grenzwert surge current ITRSMSM T C = 85 C T C = 61 C ITAVM 1220 1670,9 A A T vj = 25C, tp = 10 ms ITSM 25000 22500 A A T vj = Tvj max, tp = 10 ms Grenzlastintegral It-value T vj = Tvj max, tp = 10ms Kritische Stromsteilheit critical rate of rise of on-state current f=50 Hz, vL = 10V, iGM = 1 A It T vj = 25C, tp = 10ms DIN IEC 747-6 3125 2531 As*10 As*10 (diT/dt)cr 150 A/s (dvD/dt)cr 1000 V/s 2,13 1,38 V V 1 V diG/dt = 1 A/s Kritische Spannungssteilheit critical rate of rise of off-state voltage T vj = Tvj max, vD = 0,67 VDRM 5.Kennbuchstabe / 5th letter F Charakteristische Werte / Characteristic values Durchlaspannung on-state voltage Tvj = Tvj max, iT = 3,50 kA Tvj = Tvj max, iT = 1 kA vT vT Schleusenspannung threshold voltage T vj = Tvj max VT(TO) Ersatzwiderstand slope resistance T vj = Tvj max rT Durchlakennlinie on-state voltage T vj = Tvj max vT = A + B iT + C Ln(iT + 1) + D iT max. max. 0,2750 m mA A= 0,9686992 B= 2,17E-04 C= -0,0096522 D= 8,13E-03 Zundstrom gate trigger current T vj = 25C, vD = 6 V IGT max. 250 Zundspannung gate trigger voltage T vj = 25C, vD = 6V VGT max. 2 Nicht zundener Steuerstrom gate non-trigger current T vj = Tvj max, vD = 6 V IGD max. max. 10 5 Nicht zundene Steuerspannung gate non-trigger voltage T vj = Tvj max,vD = 0,5 VDRM VGD max. 0,25 V Haltestrom holding current T vj = 25C, vD = 6 V, RA = 5 IH max. 500 mA Einraststrom latching current T vj = 25C, vD = 6 V, RGK>= 10 IL max. 2500 mA iD, iR max. 200 mA tgd max. 4,5 s T vj = Tvj max,vD = 0,5 VDRM V mA mA iGM = 1 A, diG/dt = 1 A/s tg = 20 s Vorwarts- und Ruckwarts-Sperrstrom forward off-state and reverse currents T vj = Tvj max Zundverzug gate controlled delay time DIN IEC 747-6 vD = VDRM, vR = VRRM T vj = 25C iGM = 1 A, diG/dt = 1 A/s BIP-AM / 00-04-14, K.-A.Ruther A 07/00 Seite/page 1 Technische Information / Technical Information Netz-Thyristor Phase Control Thyristor T 1219 N 20...28 N Elektrische Eigenschften / Electrical properties Charakteristische Werte / Characteristic values Freiwerdezeit circuit commutatet turn-off time T vj = Tvj max, iTM=ITAVM tq vRM =100V, vDM = 0,67 VDRM dvD/dt = 20 V/s, -diT/dt = 10 A/s typ. 4. Kennbuchstabe / 4th letter O 350 s Thermische Eigenschaften / Thermal properties Innerer Warmewiderstand thermal resitance, junction to case Kuhlflache / cooling surface beidseitig / two-sided, =180sin RthJC beidseitig / two-sided, DC Anode / anode, =180sin Anode / anode, DC Kathode / cathode, =180sin Kathode / cathode, DC Ubergangs- Warmewiderstand thermal resitance, case to heatsink Kuhlflache / cooling surface max. max. max. max. max. max. 0,0184 0,0170 0,0344 0,0330 0,0364 0,0350 C/W C/W C/W C/W C/W C/W max. max. 0,0035 0,0070 C/W C/W RthJK beidseitig / two-sided einseitig / single-sided Hochstzulassige Sperrschichttemperatur max. junction temperature T vj max Betriebstemperatur operating temperature T c op Lagertemperatur storage temperature T stg 125 -40,,,+125 -40,,,+150 C C C Mechanische Eigenschaften / Mechanical properties Gehause, siehe Anlage case, see appendix Si-Element mit Druckkontakt Si-pellet with pressure contact Seite 3 page 3 Anprekraft clamping force F Gewicht weight G 20...45 typ. 540 Kriechstrecke creepage distance 32 Feuchteklasse humidity classification DIN 40040 Schwingfestigkeit vibration resistance f = 50Hz A 07/00 g mm C 50 Mit dieser technischen Information werden Halbleiterbauelemente spezifiziert, jedoch keine Eigenschaften zugesichert. Sie gilt in Verbindung mit den zugehorigen Technischen Erlauterungen./ The technical Information specifies semiconductors devices but promises no characteristics. It is valid in combination with the belonging technical notes. BIP-AM / 00-04-14, K.-A.Ruther kN Seite/page 2 m/s Technische Information / Technical Information Netz-Thyristor Phase Control Thyristor BIP-AM / 00-04-14, K.-A.Ruther T 1219 N 20...28 A 07/00 Zn. Nr.: 1 N Seite/page 3 Technische Information / Technical Information Netz-Thyristor Phase Control Thyristor T 1219 N 20...28 N Kuhlung Analytische Elemente des transienten Warmewiderstandes ZthJC fur DC cooling Analytical ementes of transient thermal impedance ZthJC for DC Pos.n 1 2 3 4 5 6 beidseitig Rthn [C/W] 0,000220 0,001100 0,001020 0,002830 0,006080 0,00575 two-sided n [s] 0,001360 0,003060 0,013900 0,066200 0,512000 1,490 anodenseitig Rthn [C/W] 0,000650 0,001900 0,002390 0,003810 0,004250 0,02000 anode-sided n [s] 0,001600 0,009100 0,079100 0,260000 1,736000 7,210 kathodenseitig Rthn [C/W] 0,000550 0,002060 0,006040 0,005510 0,020840 cathode-sided n [s] 0,001400 0,008570 0,154000 2,580000 7,0070 n max Analytische Funktion / analytical function : ZthJC = Rthn ( 1 - EXP ( - t / n )) n=1 BIP-AM / 00-04-14, K.-A.Ruther A 07/00 Seite/page 4 7 Technische Information / Technical Information Netz-Thyristor Phase Control Thyristor T 1219 N 20...28 N 6.000 5.000 iT [A] 4.000 3.000 2.000 1.000 0 0,5 1 1,5 2 2,5 3 vT [V] Grenzdurchlakennlinie / Limiting 0n-state characteristic iT = f(vT) Tvj = Tvj max BIP-AM / 00-04-14, K.-A.Ruther A 07/00 Z. Nr.: 2 Seite/page 5 Technische Information / Technical Information Netz-Thyristor Phase Control Thyristor T 1219 N 20...28 N 4.000 180 3.500 120 90 3.000 60 = 30 PTAV [W] 2.500 2.000 1.500 1.000 500 0 0 500 1000 1500 2000 ITAV [A] Durchlaverlustleistung / On-state power loss PTAV = f(ITAV) Parameter: Stromfluwinkel / current conduction angle BIP-AM / 00-04-14, K.-A.Ruther A 07/00 Z.Nr.: 3 Seite/page 6 Technische Information / Technical Information Netz-Thyristor Phase Control Thyristor T 1219 N 20...28 N 140 120 TC [C] 100 80 60 40 = 30 90 60 120 180 20 0 500 1000 1500 2000 ITAVM [A] Hochstzulassige Gehausetemperatur / Maximum allowable case temperature TC = f(ITAVM) Beidseitige Kuhlung / Two-sided cooling Parameter: Stromfluwinkel / current conduction angle BIP-AM / 00-04-14, K.-A.Ruther A 07/00 Z.Nr.: 4 Seite/page 7 Technische Information / Technical Information Netz-Thyristor Phase Control Thyristor T 1219 N 20...28 N 140 120 TC [C] 100 80 60 40 = 30 60 90 120 180 20 0 200 400 600 800 1000 1200 1400 ITAVM [A] Hochstzulassige Gehausetemperatur / Maximum allowable case temperature TC = f(ITAVM) Anodenseitige Kuhlung / anode sided cooling Parameter: Stromfluwinkel / current conduction angle BIP-AM / 00-04-14, K.-A.Ruther A 07/00 Z.Nr.: 5 Seite/page 8 1600 Technische Information / Technical Information Netz-Thyristor Phase Control Thyristor T 1219 N 20...28 N 140 120 TC [C] 100 80 60 40 = 30 60 90 800 1000 120 180 20 0 200 400 600 1200 1400 ITAVM [A] Hochstzulassige Gehausetemperatur / Maximum allowable case temperature TC = f(ITAVM) Kathodenseitige Kuhlung / cathode sided cooling Parameter: Stromfluwinkel / current conduction angle BIP-AM / 00-04-14, K.-A.Ruther A 07/00 Z.Nr.: 6 Seite/page 9 1600 Technische Information / Technical Information Netz-Thyristor Phase Control Thyristor T 1219 N 20...28 N 140 120 TA [C] 100 80 60 90 120 180 40 60 = 20 0 50 100 150 200 250 300 ITAVM [A] Hochstzulassige Kuhlmitteltemperatur / Max. allowable cooling medium temperature TA = f (ITAVM) Luftselbstkuhlung / Natural air-cooling Kuhlkorper/Heatsink. K0.05F Parameter: Stromfluwinkel / current conduction angle BIP-AM / 00-04-14, K.-A.Ruther A 07/00 Z.Nr.: 7 Seite/page 10 350 Technische Information / Technical Information Netz-Thyristor Phase Control Thyristor T 1219 N 20...28 N 140 120 TA [C] 100 80 60 40 = 30 60 90 120 180 20 0 200 400 600 800 1000 ITAVM [A] Hochstzulassige Kuhlmitteltemperatur / Max. allowable cooling medium temperature TA = f (ITAVM) Verstarkte Luftkuhlung / Forced air-cooling Kuhlkorper/Heatsink. K0.05F,TA = 35 C, VL = 120 l/s Parameter: Stromfluwinkel / current conduction angle BIP-AM / 00-04-14, K.-A.Ruther A 07/00 Z.Nr.: 8 Seite/page 11 Technische Information / Technical Information Netz-Thyristor Phase Control Thyristor T 1219 N 20...28 N 4.500 DC 4.000 180 120 3.500 90 60 3.000 = 30 30 PTAV [W] 2.500 2.000 1.500 1.000 500 0 0 500 1000 1500 2000 2500 ITAV [A] Durchlaverlustleistung / On-state power loss PTAV = f(ITAV) Parameter: Stromfluwinkel / current conduction angle BIP-AM / 00-04-14, K.-A.Ruther A 07/00 Z.Nr.: 9 Seite/page 12 3000 Technische Information / Technical Information Netz-Thyristor Phase Control Thyristor T 1219 N 20...28 N 140 120 TC [C] 100 80 60 40 = 30 60 90 120 DC 180 20 0 500 1000 1500 2000 2500 ITAVM [A] Hochstzulassige Gehausetemperatur / Maximum allowable case temperature TC = f(ITAVM) Beidseitige Kuhlung / Two-sided cooling Parameter: Stromfluwinkel / current conduction angle BIP-AM / 00-04-14, K.-A.Ruther A 07/00 Z.Nr.: 10 Seite/page 13 3000 Technische Information / Technical Information Netz-Thyristor Phase Control Thyristor T 1219 N 20...28 N 140 120 TC [C] 100 80 60 40 = 30 60 90 120 180 DC 20 0 200 400 600 800 1000 1200 1400 1600 1800 2000 ITAVM [A] Hochstzulassige Gehausetemperatur / Maximum allowable case temperature TC = f(ITAVM) Anodenseitige Kuhlung / anode sided cooling Parameter: Stromfluwinkel / current conduction angle BIP-AM / 00-04-14, K.-A.Ruther A 07/00 Z.Nr.: 11 Seite/page 14 2200 Technische Information / Technical Information Netz-Thyristor Phase Control Thyristor T 1219 N 20...28 N 140 120 TC [C] 100 80 60 40 = 30 60 180 90 120 DC 20 0 1000 2000 ITAVM [A] Hochstzulassige Gehausetemperatur / Maximum allowable case temperature TC = f(ITAVM) Kathodenseitige Kuhlung / cathode sided cooling Parameter: Stromfluwinkel / current conduction angle BIP-AM / 00-04-14, K.-A.Ruther A 07/00 Z.Nr.: 12 Seite/page 15 Technische Information / Technical Information Netz-Thyristor Phase Control Thyristor T 1219 N 20...28 N 140 120 TA [C] 100 80 60 90 120 180 40 DC = 30 60 20 0 100 200 300 400 ITAVM [A] Hochstzulassige Kuhlmitteltemperatur / Max. allowable cooling medium temperature TA = f (ITAVM) Luftselbstkuhlung / Natural air-cooling Kuhlkorper/Heatsink. K0.05 F Parameter: Stromfluwinkel / current conduction angle BIP-AM / 00-04-14, K.-A.Ruther A 07/00 Z.Nr.: 13 Seite/page 16 Technische Information / Technical Information Netz-Thyristor Phase Control Thyristor T 1219 N 20...28 N 140 120 TA [C] 100 80 60 120 180 40 = 30 60 90 DC 20 0 200 400 600 800 1000 ITAVM [A] Hochstzulassige Kuhlmitteltemperatur / Max. allowable cooling medium temperature TA = f (ITAVM) Verstarkte Luftkuhlung / Forced air-cooling Kuhlkorper/Heatsink. K0.05F, VL = 120 l/s Parameter: Stromfluwinkel / current conduction angle BIP-AM / 00-04-14, K.-A.Ruther A 07/00 Z.Nr.: 14 Seite/page 17 1200 Technische Information / Technical Information Netz-Thyristor Phase Control Thyristor T 1219 N 20...28 N 100.000 I TAV (vor) = 0A 100 A 170 A 210 A 235 A 250 A 20.00 10.000 8.000 I T (OV) [A] 6.000 4.000 2.00 1.000 800 100 0,01 0,1 1 10 100 1000 t [s] Uberstrom / Overload on-state current IT(OV) = f(t) Beidseitige Luftselbstkuhlung / Two-sided natural cooling K0.05F TA = 45C Parameter: Vorlaststrom / pre-load current ITAV(vor) BIP-AM / 00-04-14, K.-A.Ruther A 07/00 Z. Nr.: 15 Seite/page 18 10000 Technische Information / Technical Information Netz-Thyristor Phase Control Thyristor T 1219 N 20...28 N 100.000 40.00 0 I T (OV) [A] 20.000 00 I TAV (vor)] = 0A 200 A 300 A 380 A 430 A 470 A 10.000 8.00 6.000 4.000 2.000 1.000 0,01 0,1 1 10 100 1000 t [s] Uberstrom / Overload on-state current IT(OV) = f(t) Beidseitige verstarkte Kuhlung / forced two-sided cooling K0.05F TA = 35C, VL = 120 l/s Parameter: Vorlaststrom / pre-load current ITAV(vor) BIP-AM / 00-04-14, K.-A.Ruther A 07/00 Z. Nr.: 16 Seite/page 19 10000 Technische Information / Technical Information Netz-Thyristor Phase Control Thyristor T 1219 N 20...28 5000 N 5000 20 s ITAV(vor) [A]=250 210 100 4s 4000 4000 I TINT [A], I TAV(vor) = 0 2350 1 min 3000 170 0 1s 3000 4 min 0,4 s 2000 SD=0,1 s 2000 SD ED 2h 1000 1000 40 min ITINT ITAV(vor) 10 min 0 0 0,1 1 ED [%] 100 0 10 1000 2000 3000 ITINT [A] 4000 5000 Hochstzul. Durchlastrom bei Ausetzbetrieb / Max. allowable on-state current during intermittent operation ITINT = f(ED) Beidseitig Luftselbstkuhlung / two-sided natural cooling K 0.048F TA = 45 C Parameter: Vorlaststrom / pre-load current ITAV(vor) , Spieldauer / cycle duration SD 5000 5000 4s 20 s ITAV(vor) [A]=750 700 1s 4000 I TINT [A], I TAV(vor) = 0 6200 500 0 4000 1 min 350 0 0,4 s 3000 3000 4 min SD=0,1s 2000 1000 2000 SD ED 2h 1000 40 min 0 0,1 I TINT I TAV(vor) 10 min 0 1 10 100 0 1000 2000 ED [%] 3000 4000 ITINT [A] Hochstzul. Durchlastrom bei Ausetzbetrieb / Max. allowable on-state current during intermittent operation ITINT = f(ED) Beidseitig verstarkte Kuhlung / forced two-sided cooling K 0.048F TA = 35 C, VL = 120 l/s Parameter: Vorlaststrom / pre-load current ITAV(vor) , Spieldauer / cycle duration SD BIP-AM / 00-04-14, K.-A.Ruther A 07/00 Z. Nr.: 17 Seite/page 20 5000 Technische Information / Technical Information Netz-Thyristor Phase Control Thyristor T 1219 N 20...28 N 25.000 20.000 a T A = 35 C vL =120l/s I T(OV)M [A] 15.000 b 10.000 T A = 45 C 5.000 0 0,01 0,1 1 10 t [s] Grenzstrom / Max. overload on-state current IT(OV)M = f(t), vRM = 0,8 VRRM Beidseitige Kuhlung / Two-sided cooling Kuhlkorper / Heatsink: K 0.05F Belastung aus / Surge current occurs: a - Leerlauf / No-load conditions b - Betrieb mit Dauergrenzstrom / During operation at max. average on-state current ITAVM BIP-AM / 00-04-14, K.-A.Ruther A 07/00 Z. Nr.: 18 Seite/page 21 Technische Information / Technical Information Netz-Thyristor Phase Control Thyristor T 1219 N 20...28 N 101 8 c 6 b 4 vG [V] a 3 2 100 8 6 4 3 2 10-1 1 10 2 3 4 5 6 8 102 2 3 4 5 6 8 103 2 3 4 5 6 iG [mA] Steuercharakteristik vG = f (iG) mit Zundbereichen fur VD = 6 V Gate characteristic vG = f (iG) with triggering area for VD = 6 V Hochstzulassige Spitzensteuerverlustleistung / Maximum rated peak gate power disspation PGM = f (tg) : a - 40 W/10ms b - 80 W/1ms c - 100 W/0,5ms d - 150 W/0,1ms BIP-AM / 00-04-14, K.-A.Ruther A 07/00 Z.Nr.: 19 Seite/page 22 8 104 Technische Information / Technical Information Netz-Thyristor Phase Control Thyristor T 1219 N 20...28 N 103 5 2 2 a Tgd 10 [s] 5 2 1 10 b 5 2 0 10 5 2 -1 10 101 2 3 4 5 6 8102 2 3 4 5 6 8103 2 3 4 5 6 8104 iG [mA] Zundverzug / Gate controlled delay time tgd = f(iGM) Tvj = 25C, diG/dt = iGM/1s a - maximaler Verlauf / limiting characteristic b - typischer Verlauf / typical characteristic BIP-AM / 00-04-14, K.-A.Ruther A 07/00 Z.Nr.: 20 Seite/page 23 Technische Information / Technical Information Netz-Thyristor Phase Control Thyristor T 1219 N 20...28 N 10000 iTM = 9.000 8.000 2000A 7.000 1000A 6.000 500A 5.000 200A 500A 4.000 Qr [As] 100A 3.000 50A 2.000 20A 1000 1 10 100 -di/dt [A/s] Sperrverzogerungsladung / Recovered charge Qr = f(di/dt) Tvj = Tvj max, vR = 0,5 VRRM, v RM = 0,8 VRRM Parameter: Durchlastrom / On-state current iTM BIP-AM / 00-04-14, K.-A.Ruther A 07/00 Zn. Nr.: 21 Seite/page 24 Technische Information / Technical Information Netz-Thyristor Phase Control Thyristor T 1219 N 20...28 N = 0,025 30 60 0,020 90 120 180 Z (th) JC [C/W] 0,015 0,010 0,005 0,000 0,001 0,01 0,1 1 10 100 t [s] Transienter innerer Warmewiderstand / Transient thermal impedance Z(th)JC = f(t) Beidseitige Kuhlung /Ttwo-sided cooling Parameter: Stromfluwinkel / current conduction angle BIP-AM / 00-04-14, K.-A.Ruther A 07/00 Z.Nr.: 22 Seite/page 25 Technische Information / Technical Information Netz-Thyristor Phase Control Thyristor T 1219 N 20...28 N = 0,040 30 90 60 120 180 Z (th) JC [C/W] 0,030 0,020 0,010 0,000 0,001 0,01 0,1 1 10 100 t [s] Transienter innerer Warmewiderstand / Transient thermal impedance Z(th)JC = f(t) Anodenseitige Kuhlung / Anode-sided sided cooling Parameter: Stromfluwinkel / current conduction angle BIP-AM / 00-04-14, K.-A.Ruther A 07/00 Z.Nr.: 23 Seite/page 26 Technische Information / Technical Information Netz-Thyristor Phase Control Thyristor T 1219 N 20...28 N 0,045 = 30 0,040 60 90 120 180 0,035 Z (th) JC [C/W] 0,030 0,025 0,020 0,015 0,010 0,005 0,000 0,001 0,01 0,1 1 10 100 t [s] Transienter innerer Warmewiderstand / Transient thermal impedance Z(th)JC = f(t) Kathodenseitige Kuhlung / Cathde-sided cooling Parameter: Stromfluwinkel / current conduction angle BIP-AM / 00-04-14, K.-A.Ruther A 07/00 Z.Nr.: 24 Seite/page 27 Technische Information / Technical Information Netz-Thyristor Phase Control Thyristor T 1219 N 20...28 N = 30 0,025 60 90 120 0,020 180 DC Z (th) JC [C/W] 0,015 0,010 0,005 0,000 0,001 0,01 0,1 1 10 100 t [s] Transienter innerer Warmewiderstand / Transient thermal impedance Z(th)JC = f(t) Beidseitige Kuhlung / Two-sided cooling Parameter: Stromfluwinkel / current conduction angle BIP-AM / 00-04-14, K.-A.Ruther A 07/00 Z.Nr.: 25 Seite/page 28 Technische Information / Technical Information Netz-Thyristor Phase Control Thyristor T 1219 N 20...28 N 0,045 = 30 0,040 60 90 120 180 0,035 DC Z (th) JC [C/W] 0,030 0,025 0,020 0,015 0,010 0,005 0,000 0,001 0,01 0,1 1 10 100 t [s] Transienter innerer Warmewiderstand / Transient thermal impedance Z(th)JC = f(t) Anodenseitige Kuhlung / Anode-sided cooling Parameter: Stromfluwinkel / current conduction angle BIP-AM / 00-04-14, K.-A.Ruther A 07/00 Z.Nr.: 26 Seite/page 29 Technische Information / Technical Information Netz-Thyristor Phase Control Thyristor T 1219 N 20...28 N 0,045 = 30 60 90 120 0,040 180 DC 0,035 Z (th) JC [C/W] 0,030 0,025 0,020 0,015 0,010 0,005 0,000 0,001 0,01 0,1 1 10 100 t [s] Transienter innerer Warmewiderstand / Transient thermal impedance Z(th)JC = f(t) Kathodenseitige Kuhlung / Cathode-sided cooling Parameter: Stromfluwinkel / current conduction angle BIP-AM / 00-04-14, K.-A.Ruther A 07/00 Z.Nr.: 27 Seite/page 30 Terms & Conditions of Usage Attention The present product data is exclusively subscribed to technically experienced staff. This Data Sheet is describing the specification of the products for which a warranty is granted exclusively pursuant the terms and conditions of the supply agreement. There will be no guarantee of any kind for the product and its specifications. Changes to the Data Sheet are reserved. You and your technical departments will have to evaluate the suitability of the product for the intended application and the completeness of the product data with respect to such application. Should you require product information in excess of the data given in the Data Sheet, please contact your local Sales Office via "www.eupec.com / sales & contact". Warning Due to technical requirements the products may contain dangerous substances. For information on the types in question please contact your local Sales Office via "www.eupec.com / sales & contact".