Packaged PIN Diodes Rev. V13 Features High Power Fast Speed Voltage Ratings to 1500 Volts Wide Selection of Carrier Lifetimes Wide Selection of Capacitances Assortment of Packages Styles Available Screened for Military Applications RoHS* Compliant Maximum Power Dissipation Cathode Heatsink Packages PDISS = T (max oper.) -25C 30,31,36,43,120, Thermal Resistance 150,255 258,296,1072,1079 Leaded Packages +25C Surface Mount Package +25C Description and Applications PDISS = 300 mW Co-Axial Packages MACOM's broad line of packaged PIN diodes encompass a comprehensive range of electrical characteristics and package outlines. This diverse union of semiconductor technology and chip packaging gives considerable flexibility to the circuit designer. The fast switching series of packaged PIN diodes utilize a thin I-region, silicon oxide or glass passivated chip which provides for low leakage current and low insertion loss. With the use of in process control monitors to regulate wafer fabrication parameters, these devices will achieve consistent performance in control circuit applications. The high voltage product line of packaged PIN diodes employs MACOM CERMACHIP(R) passivation process which provides for a hard glass encapsulation that hermetically seals and protects the active area of the chip. These packaged CERMACHIP(R) PIN diodes are ideally suited for use in high power applications where high level RF voltages are present. The diode chips are bonded into sealed ceramic packages that are designed for the most stringent electrical and environmental conditions. An extensive choice of package styles are available which may be used in a wide variety of RF microwave circuits. The packaged PIN diodes series are designed to have a high inherent reliability and may be ordered screened to meet many MIL-STD requirements. PDISS = 250 mW 31 36 30, 296 120,255 Leaded/Surface Mount Packages Thru 276 1072,1079 1088 186 1056 144 * Restrictions on Hazardous Substances, European Union Directive 2011/65/EU. 1 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support Hole Packaged PIN Diodes Rev. V13 100 to 250 V Fast Switching PIN Diodes Specifications (TAMB = +25C) Part Number 1. 2. 3. 4. 5. 6. Minimum Reverse Voltage2 Maximum Capacitance 1 Maximum Series Res. @ IR <10 A CT @ -10 V f = 1 MHz RS @ 10 mA f = 500 MHz Maximum Thermal Resistance Nominal Characteristics Carrier Lifetime5 TRR6 I-Region Width V pF C/W ns ns m MA4P202-120 MA4P203-30 100 100 0.25 0.35 2.50 1.50 60 30 60 100 5 20 12 12 MA4P303-36 MA4P404-30 200 250 0.35 0.403 1.50 0.704 30 20 200 1000 60 100 20 30 Capacitance values shown are for the case style specified in the part number, other case style will result in different values. The minimum specified VR (Reverse Voltage) is sourced and the resultant reverse leakage current, Ir, is measured to be <10 A At VR = -50 V Rs measured at IF = +50 mA, f = 100 MHz. Nominal carrier life time specified with diode biased at IF = +10 mA , IREV = -6 mA Nominal TRR (reverse recovery time) specified with diode biased at IF = +20 mA , IREV = -200 mA. Package Options Consult the "Package Availability Table" on page 7 for more package style choices. 35 to 500 V MELF General Purpose Switching Diodes Specifications (T AMB = +25C) Part Number7 Minimum Reverse Voltage8 Maximum Capacitance1 Maximum Series Res. @ IR <10 A CT @ -10 V f = 1 MHz RS @ 10 mA f = 100 MHz CW Power Dissipation Nominal Characteristics Carrier IF I-Region LifeWhen Width 9 RS = 75 W time mA s mm V pF W MA4PH235-1072T MADP-000593-10720T 35 150 1.2 1.5 0.50 0.55 1.0 10.0 -- -- 0.3 1.0 0.4 1.0 MA4PH236-1072T MA4PH237-1079T 600 200 0.5 1.5 3.75 2.0 -- -- 1.5 3.0 2.0 3.0 MA4PH238-1072T MA4PH239-1079T 200 200 0.5 0.8 6.0 25.0 1.0 2.0 0.30-0.60 1.20-2.40 2.0 6.0 4.0 14.0 MADP-000234-10720T 500 1.510 0.25 @ 100 mA 5.0 -- 3.0 2.0 7. 8. 9. 10. 3.0 0.6 @ 50 mA Only available in case styles indicated. The minimum specified VR (Reverse Voltage) is sourced and the resultant reverse leakage current, Ir, is measured to be <10 A. Nominal carrier life time specified with diode biased at IF = +10 mA , IREV = -6 Ma Ct tested at 100 V 1072,1079 2 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support Packaged PIN Diodes Rev. V13 500 V PIN Diodes Specifications (TAMB = +25C) Minimum Reverse Voltage11 Maximum Capacitance1 Maximum Series Res. @ IR <10 A CT @ 100 V f = 1 MHz RS @ 100 mA f = 100 MHz V pF MA4P504-30 500 0.40 MADP-000015-00003013 MA4P506-30 500 500 0.55 0.90 Part Number CW Power Dissipation Nominal Characteristics Carrier Lifetime12 I-Region Width W s mm 0.60 10 1.0 2 0.45 0.30 15 15 2.0 3.0 2 2 11. The minimum specified VR (Reverse Voltage ) is sourced and the resultant reverse leakage current, Ir, is measured to be <10 A. 12. Nominal carrier life time specified with diode biased at IF = +10 mA , IREV = -6 mA 13. To order this part in a package style other than 30, use the prefix MA4P505 followed by a dash and the desired package style. Package Options Consult the "Package Availability Table" on page 7 for more package style choices. 500 V MELF PIN Diode Specifications (TAMB = +25C) Part Number Minimum Reverse Voltage14 Maximum Capacitance1 Maximum Series Res. @ IR <10 A CT @ 100 V f = 1 MHz RS @ 100 mA f = 100 MHz MA4P505-1072T MA4P506-1072T CW Power Dissipation Nominal Characteristics Carrier Lifetime15 I-Region Width V pF W s mm 500 500 0.65 1.0 0.45 0.30 15 15 2.0 3.0 2 2 14. The minimum specified VR (Reverse Voltage) is sourced and the resultant reverse leakage current, Ir, is measured to be <10 A. 15. Nominal carrier life time specified with diode biased at I F = +10 mA , IREV = -6 mA 1072 3 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support Packaged PIN Diodes Rev. V13 1000 V CERMACHIP PIN Diodes Specification (TAMB = +25C) Part Number Minimum Reverse Voltage16 Maximum Capacitance1 Maximum Series Res. @ IR <10 A CT @ 100 V f = 1 MHz RS @ 100 mA f = 100 MHz CW Power Dissipation Nominal Characteristics Carrier Lifetime17 I-Region Width V pF W s mm MA4P604-30 1000 0.50 1.00 15 3.0 4 MA4P606-30 MA4P607-43 1000 1000 0.80 2.00 0.70 0.40 20 25 4.0 5.0 4 4 16. The maximum specified VR (reverse voltage) is sourced and the resultant reverse leakage current, Ir, is measured to be <10 A. 17. Nominal carrier life time specified with diode biased at IF = +10 mA , IREV = -6 mA. Package Options Consult the "Package Availability Table" on page 7 for more package style choices. 1500 V CERMACHIP PIN Diode Specifications (TAMB = +25C) Part Number Minimum Reverse Voltage18 Maximum Capacitance1 Maximum Series Res. @ IR <10 A CT @ 100 V f = 1 MHz RS @ 200 mA f = 100 MHz V pF 1500 3.30 0.25 MA4P709-150 Maximum Thermal Resistance Nominal Characteristics Carrier Lifetime19 I-Region Width W s mm 2 10.0 7 18. The minimum specified VR (reverse voltage) is sourced and the resultant reverse leakage current, Ir, is measured to be <10 A. 19. Nominal carrier life time specified with diode biased at IF = +10 mA , IREV = -6 mA. 150 4 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support Packaged PIN Diodes Rev. V13 Performance curves at 100 MHz Forward Current vs. Series Resistance MA4P504, MA4P505 and MA4P506 Series Resistance Rs () Series Resistance Rs () Forward Current vs. Series Resistance MA4P202, MA4P203, MA4P303 and MA4P404 Forward Current (IF) Forward Current (IF) Forward Current vs. Series Resistance MA4P709 Series Resistance Rs () Series Resistance Rs () Forward Current vs. Series Resistance MA4P604, MA4P606 and MA4P607 5 Forward Current (IF) Forward Current (IF) M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support Packaged PIN Diodes Rev. V13 Absolute Maximum Ratings20 Parameter Absolution Max. Voltage As Specified in Table Operating Temperature - 65C to +175C Storage Temperature - 65C to +200C Operating and Storage (Case Style 1088) - 65C to +125C 20. Exceeding any one or combination of these limits may cause permanent damage to this device. Maximum Soldering Temperature21,22 (Hand soldering operation) Case Styles Maximum Temperature 120, 144, 150*,186, 255, 258*, 276, 1088, 1072, 1079 265C maximum for 5 seconds 30*, 31, 36*, 43*, 225C maximum for 5 seconds 21. Package styles (marked with an *) that are threaded or have pronged ends rely on a pressure connection and do not require solder attachment but can be soldered if desired. 22. Refer to application note M538 on the MACOM website for solder reflow profiles. Recommended Groups B & C Testing Per MIL-STD 750 Recommended Screening Per MIL-STD 750 Recommended methods and conditions for Groups B, C and equivalent TX and TXV level screening. Recommended methods and conditions for equivalent TX and TXV level screening. Inspection Method Condition Inspection Method Condition Storage Temperature 1031 See Maximum Ratings Internal Visual and / or X-Ray 2072, 2076 Notes23,24 Operating Temperature ---- See Maximum Ratings High Temp. Storage 1032 48 hours min. @ max. storage temp. Temperature Cycling 1051 5 cycles - 65C to +150C Thermal Shock 1051 10 Cycles Shock 2016 500 g's Constant Acceleration 2006 20,000 g's, Y1 Vibration 2056 15 g's Fine Leak 1071 H Constant Acceleration 2006 20,000 g's Gross Leak 1071 C or E Humidity 1021 10 Days Electrical ---- Notes22,23 Burn-In 1038 Notes22,23 23. Conditions and details of test depend on specific model number. Information available upon request. 24. Case styles 1056 and 1088 are not military, MIL-STD-750, rated packages. 6 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support Packaged PIN Diodes Rev. V13 Ordering Information The Packaged PIN Diode specifications shown in the tables on pages 2, 3, & 4 are for the standard style package. The standard package style is indicated by the number following the dash after the base part number. Note that the specification tables list the total diode capacitance for the standard case style. The total capacitance for the base part in an alternative package will differ and is computed by adding the junction capacitance of the chip and the parasitic capacitance of the alternative package as defined in the Package Parasitic Capacitance table. To compute the chip junction capacitance, subtract the total capacitance shown in the specifications tables on pages 2, 3, & 4 from the appropriate standard style package capacitance below The various base part numbers are only available in the case styles shown in the Package Availability Table below. To order, indicate the base part number followed by a dash and the desired package style. For example: The MA4P506-258 is the MA4P506 chip in the 258 style package. Package Availability Table25 Base Part Number MA4P202 Package Parasitic Capacitance Available ODS Package Styles 120, 276, Package Style Cap. (pF) 30 0.18 MA4P203 30, 1056 31 0.18 MA4P303 120, 186, 1088 36 0.18 MA4P404 30, 258, 30, 120, 144, 186, 25,26 255,1072T 43 0.75 120 0.13 144 0.42 186 0.15 255 0.30 258 0.18 276 0.13 296 0.35 1056 0.20 1072 0.16 1079 0.13 1088 0.12 MA4P504 25 MA4P505 36, 255, 1072T MA4P506 MA4P604 30, 31, 255, 258, 1072T 30, 255, 258 MA4P606 30, 36, 258 MA4P607 43, 296 MA4P709 150 25 MADP-000015-000030 30 25 MA4PH235 1072T MA4PH236 1072T MA4PH237 1079T MA4PH238 1072T MA4PH239 1079T MADP-000234 25 25 25 25 25 10720T* 25. "T" after the package style number indicates tape and reel, refer to M513 for tape and reel information. 26. Datasheet for MA4P504-1072 can be found at: macomtech.com//datasheets/MA4P504-1072 7 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support