NMOS multichannel detector head C5964 series UV to near infrared range (200 to 1000 nm), For multichannel spectrophotometry The C5964 series is a family of multichannel detectors developed for spectrophotometry in the UV to near infrared range (up to 1000 nm). The C5964 series device incorporates a thermoelectrically-cooled NMOS linear image sensor (S5930/S5931/S8382/ S8383 series), low noise driver/amplifier circuit and highly stable temperature control circuit. It also operates from simple external signal inputs. The image sensor is cooled to a preset temperature (Ts=0 C) as soon as the power is turned on. Should the cooler fail and the device overheat, the built-in protection circuit automatically shut off the power. The housing is designed for compactness, yet offers good heart dissipation. Furthermore, mounting holes are provided on the front panel of the housing, permitting easy connection to a monochromator or other instruments Features Applications Designed for use with a thermoelectrically-cooled NMOS linear image sensors (S5930 series, etc.) Multichannel spectrophotometry Built-in driver/amplifier and temperature control circuits Highly stable temperature control ensures a constant cooling temperature of Ts=0 0.05 C (at Ta=10 to 30 C) Spectrophotometer, colorimeter Optical spectrum analyzer Time-resolved photometry Operates from simple signal inputs High sensitivity and wide dynamic range Selection guide The C5964 series consists of the following models depending on the NMOS linear image sensor used. NMOS multichannel detector head C5964-0800 C5964-0900 C5964-0910 C5964-1010 C5964-0801 C5964-0901 C5964-0911 C5964-1011 Type No. S5930-256S S5930-512S S5931-512S S5931-1024S S8382-256S S8382-512S S8383-512S S8383-1024S NMOS linear image sensor Pixel size Effective active area Number of pixels [m (H) x m (V)] [mm (H) x mm (V)] 256 12.8 x 2.5 50 x 2500 512 25.6 x 2.5 512 12.8 x 2.5 25 x 2500 1024 25.6 x 2.5 256 12.8 x 2.5 50 x 2500 512 25.6 x 2.5 512 12.8 x 2.5 25 x 2500 1024 25.6 x 2.5 www.hamamatsu.com Remark Standard type IR-enhanced type 1 NMOS multichannel detector head C5964 series Connection example Shutter * timing pulse AC cable (100 to 240 V; included with the C7557-01) Trig. POWER SIGNAL I/O Dedicated cable (Included with the C7557-01) USB cable (Included with the C7557-01) TE CONTROL I/O Controller for multichannel detector head C7557-01 C5964 series PC (Windows 2000/XP/Vista) (USB 2.0) * Shutter, etc. are not available. KACCC0070ED Precaution for use When operating the C5964 series with the C7557-01, always be sure to attach the MOS adapter (supplied) to the C7557-01 main unit. If the the C5964 series is connected and the power is turned on without attaching the adapter, the power supply in the C7557-01 main unit may be damaged. Absolute maximum ratings Parameter Supply voltage (for digital circuitry) Supply voltage (for analog circuitry) Digital input voltage Operating temperature Storage temperature Symbol +VD VA Topr Tstg Value -0.5 to +7 18 VD +10 to +30 0 to +50 Unit V V V C C Electrical characteristics (Ta=25 C, VD=+5 V, VA=15 V, unless otherwise noted) Parameter High level Low level Digital input Master clock (CLK) pulse frequency Video signal readout frequency Master start (Start) pulse width Digital output Power supply conditions High level (Io=-6 mA) Low level (Io=+6 mA) Digital Rated voltage Analog +5 Vdc *1 Current consumption +15 Vdc -15 Vdc Symbol VIH VIL fCLK fv tst VIH VIL +VD VA - Min. +2.0 -0.5 1/fCLK +2.0 +4.75 14.5 - Typ. +5.0 15.0 - Max. +VD +0.8 375 fCLK/6 +0.8 +5.25 15.5 +2.0 +100 -100 Unit V V kHz Hz s V V V V A mA mA *1: Including the current consumption of the Peltier element incorporated in the NMOS linear image sensors (S5930 series, etc.) 2 NMOS multichannel detector head C5964 series Electrical and optical characteristics (Ta=25 C, Ts=0 C, VD=+5 V, VA=15 V, unless otherwise noted) Parameter Spectral response range Built in sensor S5930/S5931 series S8382/S8383 series S5930 series S5931 series S8382 series S8383 series S5930 series S5931 series S8382 series S8383 series Peak sensitivity wavelength Saturation output charge Dark current Photo response non-uniformity *2 Symbol p Qsat ID PRNU S5930 S5931 S8382 S8383 Conversion gain series series series series Gc Min. - Typ. 200 to 1000 600 750 50 25 50 25 0.009 0.004 0.009 0.004 0.2 0.4 0.2 0.4 Max. 0.03 0.01 0.03 0.01 3 - Unit nm nm pC pA/pixel % V/pC *2: Use for "A" light source. 50 % of saturation, excluding first and last pixels. Temperature controller specifications (Ta=25 C, VD=+5 V, VA=15 V, unless otherwise noted) Parameter *3 Cooling temperature Temperature control range Power dissipation of Peltier element Cool down time to preset temperature Setting temperature for overheart protection Symbol Ts Ts Pp to To Min. -1 -0.05 +40 Typ. 0 - Max. +1 +0.05 7 5 - Unit C C W min C *3: Other functions include error display, automatic power off, and detection of electrical opens and shorts by the thermosensor. Spectral response (Measurement example) (Ta=25 C) 0.5 IR-enhanced types Photo sensitivity (A/W) 0.4 0.3 0.2 0.1 Standard types 0 200 300 400 500 600 700 800 900 1000 1100 1200 Wavelength (nm) KMPDB0159EA 3 NMOS multichannel detector head C5964 series Equivalent circuit (NMOS linear image sensor S5930/S5931/S8382/S8383 series) Start st Clock 1 Clock 2 Digital shift register (MOS shift register) End of scan Active video Active photodiode Vss Saturation control gate Saturation control drain Dummy video Dummy diodes KMPDC0020EA Block diagram (C5964 series) +5 V, VDD(D) P+ P- +15 V TH.C *1 Temperature contoroller TH.H *2 Start CLK1 CLK2 Buffer Timing signal D.GND +15 V A. GND -15 V Themoelectric cooler +5 V -15 V LED CLK Start Controller +5 V Trigger EOS END VDD(D) GND(D) GND(A) +15 V Burrer Video NMOS linear image sensor S5930 series, etc. Data video +15 V Integration amplifier Gain amplifier Lowpass filter *1: Thermistor incorporated in the image sensor (for temperature monitoring of the image sensor) *2: Thermistor mounted on the heatsink fins (for temperature monitoring of the heat radiating side) KACCC0067EA 4 NMOS multichannel detector head C5964 series Timing chart CLK Start ST CLK1/Reset CLK2 Reset CLK2/Clamp Trigger Data video EOS KACCC0068EA Dimensional outline (unit: mm) 80.0 (4 x) M3 depth 9 115 94.0 49.0 40.0 Focal length 7.0 0.5 KACCA0053EA KACCA0053EA 5 NMOS multichannel detector head C5964 series Pin connection 15-pin D-sub connector (socket type) 8 7 15 6 14 5 13 4 12 3 11 2 10 1 9 KACCC0069EA Pin No. 1 2 3 4 5 Symbol NC Data video VA1+(+15 V) VA1-(-15 V) VD(+5 V, P+) 6 Start 7 CLK 8 EOS 9 10 11 A.GND A.GND NC 12 D.GND(P-) 13 14 D.GND D.GND 15 Trigger Description No connection Analog video output signal. Positive polarity Power supply for analog circuitry Power supply for analog circuitry Power supply for digital circuitry. For the thermoelectric cooler in the NMOS linear image sensor Digital input signal to initialize the circuit HCMOS compatible. Positive logic The start pulse interval determines the signal storage time of the sensor. Digital input signal to specify the circuit operation HCMOS compatible. Operates at the rising edge Digital output signal to indicate the end of scan of the NMOS linear image sensor HCMOS compatible. Negative logic Analog ground Analog ground No connection Digital ground. Power supply return of the thermoelectric cooler mounted in the NMOS linear image sensor Digital ground Digital ground Digital output signal for A/D conversion HCMOS compatible. Positive logic Precautions for use The C5964 series is a precision device, so use sufficient caution when handling it. Never disassemble or modify the device as this may cause an operating failure. Protect the device from shocks such as drops or impacts. Avoid storing the device in high temperature and high humidity locations for long periods of time. Never block the air vents provided on the top and side panels of this unit during operation. Blocking the air vents may cause overheating. When connecting to other equipment, check that the electrical specifications are matched. Never exceed the maximum ratings during operation. Observe the following precautions to obtain the fullest performance of device. Provide a proper shield to protect the device against external electromagnetic effects. Use of a shield cable is recommended. Use a power supply with minimum ripple and noise. Pay attention to prevent extraneous light from entering the device for accurate measurements. Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. (c)2008 Hamamatsu Photonics K.K. www.hamamatsu.com HAMAMATSU PHOTONICS K.K., Solid State Division 1126-1 Ichino-cho, Higashi-ku, Hamamatsu City, 435-8558 Japan, Telephone: (81) 53-434-3311, Fax: (81) 53-434-5184 U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P.O.Box 6910, Bridgewater, N.J. 08807-0910, U.S.A., Telephone: (1) 908-231-0960, Fax: (1) 908-231-1218 Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49) 08152-3750, Fax: (49) 08152-2658 France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: 33-(1) 69 53 71 00, Fax: 33-(1) 69 53 71 10 United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: (44) 1707-294888, Fax: (44) 1707-325777 North Europe: Hamamatsu Photonics Norden AB: Smidesvagen 12, SE-171 41 Solna, Sweden, Telephone: (46) 8-509-031-00, Fax: (46) 8-509-031-01 Italy: Hamamatsu Photonics Italia S.R.L.: Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: (39) 02-935-81-733, Fax: (39) 02-935-81-741 Cat. No. KACC1018E05 Aug. 2008 DN 6