DP8310/DP8311 Octal Latched Peripheral Drivers General Description The DP8310 and DP8311 Octal Latched Peripheral Drivers provide the function of latching eight bits of data with open collector outputs, each driving up to 100 mA DC with an operating voltage range of 30V. Both devices are designed for low input currents, high input/output voltages, and feature a power up clear (outputs off) function. The DP8310 is positive edge latching. Two active low write/ enable inputs are available for convenient data bussing without external gating. The DP8311 is positive edge latching. The active low strobe input latches data or allows fall through operation when held at logic "0". The latches are cleared (outputs off) with a logic "0" on the clear pin. Features n High current, high voltage open collector outputs n Low current, high voltage inputs n All outputs simultaneously sink rated current "DC" with no thermal derating at maximum rated temperature n Parallel latching or buffering n Separate active low enables for easy data bussing n Internal "glitch free" power up clear n 10% VCC tolerance Applications n n n n n n n n n High current high voltage drivers Relay drivers Lamp drivers LED drivers TRIAC drivers Solenoid drivers Stepper motor drivers Level translators Fiber-optic LED drivers Connection Diagrams Dual-In-Line Package Dual-In-Line Package DS005246-1 Top View DS005246-2 Top View Order Number DP8310N or DP8311N See NS Package Number N20A (c) 2000 National Semiconductor Corporation DS005246 www.national.com DP8310/DP8311 Octal Latched Peripheral Drivers February 2000 DP8310/DP8311 Absolute Maximum Ratings (Note 1) Note: *Derate N20A package 15.4 mW/C above TA = 25C, JA = 65C/W. If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/ Distributors for availability and specifications. Operating Conditions Supply Voltage 7.0V Input Voltage 35V Output Voltage 35V Maximum Power Dissipation* at TA = 25C DP8310/DP8311 2005 mW Storage Temperature Range -65C to +150C Lead Temperature (Soldering, 4 sec.) 260C Supply Voltage (VCC) Temperature DP8310/DP8311 Input Voltage Output Voltage Min 4.5 Max 5.5 Units V 0 +70 30 30 C V V Typ Max Units 0.8 V 0.35 0.5 V DC Electrical Characteristics DP8310 and DP8311 (Notes 2, 3) Symbol Parameter VIH Logical "1" Input Voltage VIL Logical "0" Input Voltage VOL Logical "0" Output Voltage IOH Logical "1" Output Current IIH Logical "1" Input Current II Input Current at Maximum Input Voltage IIL Logical "0" Input Current Vclamp Input Clamp Voltage ICC0 Supply Current, Outputs On DP8310/DP8311 DP8310/DP8311 ICC1 Conditions Min 2.0 V Data outputs latched to logical "0", VCC = Min. IOL = 100 mA Data outputs latched to logical "1", VCC = Min. VOH = 30V 2.5 250 A VIH = 2.7V, VCC = Max VIN = 30V, VCC = Max 0.1 25 A 1 250 A VIN = 0.4V, VCC = Max IIN = 12 mA -215 -300 A -0.8 -1.5 V DP8310 100 152 mA DP8311 88 125 mA DP8310 40 57 mA DP8311 25 36 mA Supply Current, Outputs Off Data outputs latched to a logical "0". All Inputs are at logical "1", VCC = Max. Data outputs latched to a logic "1". Other conditions same as ICC0. AC Electrical Characteristics DP8310 only: VCC = 4.5V, TA = 25C Symbol Parameter Conditions Min Typ Max Units 40 120 ns 70 150 ns tpd0 High to Low Propagation Delay Write Enable Input to Output (Figure 1 ) tpd1 Low to High Propagation Delay Write Enable Input to Output (Figure 1 ) tSETUP Minimum Set-Up Time Data in to Write Enable Input tHOLD = 0 ns (Figure 1) 45 20 tpWH, tpWL Minimum Write Enable Pulse Width (Figure 1 ) 60 25 tTHL High to Low Output Transition Time (Figure 1 ) 16 35 ns tTLH Low to High Output Transition Time (Figure 1 ) 38 70 ns CIN "N" Package (Note 4) 5 15 pF www.national.com 2 ns ns DP8311 only: VCC = 5V, TA = 25C Symbol Parameter Conditions Min Typ Max Units 30 60 ns 70 100 ns tpd0 High to Low Propagation Delay Data In to Output (Figure 2 ) tpd1 Low to High Propagation Delay Data to Output (Figure 2) tSETUP Minimum Set-Up Time Data in to Strobe Input tHOLD = 0 ns (Figure 2 ) 0 -25 ns tpWL Minimum Strobe Enable Pulse Width (Figure 2 ) 60 35 ns tpdC Propagation Delay Clear to Data Output (Figure 2 ) tpWC Minimum Clear Input Pulse Width (Figure 2 ) 60 25 tTHL High to Low Output Transition Time (Figure 2 ) 20 tTLH Low to High Output Transition Time (Figure 2 ) 38 60 ns CIN Input Capacitance -- Any Input (Note 4) 5 15 pF 70 135 ns 35 ns ns Note 1: "Absolute Maximum Ratings" are those values beyond which the safety of the device cannot be guaranteed. Except for "Operating Temperature Range" they are not meant to imply that the devices should be operated at these limits. The table of "Electrical Characteristics" provides conditions for actual device operation. Note 2: Unless otherwise specified min/max limits apply across the 0C to +70C for the DP8310/DP8311. All typical values are for TA = 25C, VCC = 5V. Note 3: All currents into device pins shown as positive, out of device pins as negative, all voltages referenced to ground unless otherwise noted. Note 4: Input capacitance is guaranteed by periodic testing. fTEST = 10 kHz at 300 mV, TA = 25C. 3 www.national.com DP8310/DP8311 AC Electrical Characteristics DP8310/DP8311 Logic Table DP8311 DP8310 Clear CLR Strobe STR Data Input DI1-8 Data Output DO1-8 Write Enable 1 WE1 Write Enable 2 WE2 Data Input DI1-8 Data Output DO1-8 1 1 X Q 0 0 X Q 1 0 0 1 0 O 0 1 1 0 1 0 0 X X 1 0 O 1 0 O 0 0 1 O 0 1 0 0 1 X Q 1 0 X Q 1 1 X Q X = Don't Care 1 = Outputs Off 0 = Outputs On Q = Pre-existing Output O = Positive Edge Transition Block Diagrams DP8310 DS005246-3 DP8311 DS005246-4 www.national.com 4 DP8310/DP8311 Switching Time Waveforms DP8310 DS005246-5 DP8311 DS005246-6 Switching Time Test Circuits DS005246-7 DS005246-8 *WE1 = 0V When the Input = WE2 Pulse Generator Characteristics: ZO = 50, tr = tf = 5 ns FIGURE 1. DP8310 FIGURE 2. DP8311 5 www.national.com DP8310/DP8311 Typical Applications DP8310/11 Buffering High Current Device (Notes 5, 6) PNP High Current Driver Circuit Used to Reduce Peak Transient Lamp Current DS005246-9 NPN High Current Driver DS005246-12 DS005246-10 VMOS High Current Driver DS005246-11 www.national.com 6 DP8310/DP8311 Typical Applications DP8310/11 Buffering High Current Device (Notes 5, 6) (Continued) Eight Output/Four Output Fiber Optic LED Driver DP8311 Parallel Outputs (200 mA) Drivers* DP8311 100 mA Drivers DS005246-13 DS005246-14 *Parallel only adjacent outputs 8-Bit Level Translator Driver Digital Controlled 256 Level Power Supply from 1.2V to 30V DS005246-15 DS005246-16 7 www.national.com DP8310/DP8311 Typical Applications DP8310/11 Buffering High Current Device (Notes 5, 6) (Continued) 200 mA Drive for a 4 Phase Bifilar Stepper Motor Reading the State of the Latched Peripherals DS005246-17 *Parallel only adjacent outputs DS005246-18 *High Level Input Voltage must not Exceed VCC of the DM81LS96 Note 5: Always use good VCC bypass and ground techniques to suppress transients caused by peripheral loads. Note 6: Printed circuit board mounting is required if these devices are operated at maximum rated temperature and current (all outputs on DC). www.national.com 8 DP8310/DP8311 Octal Latched Peripheral Drivers Physical Dimensions inches (millimeters) unless otherwise noted Molded Dual-In-Line Package (N) Order Number DP8310N or DP8311N NS Package Number N20A LIFE SUPPORT POLICY NATIONAL'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT AND GENERAL COUNSEL OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. National Semiconductor Corporation Americas Tel: 1-800-272-9959 Fax: 1-800-737-7018 Email: support@nsc.com www.national.com National Semiconductor Europe Fax: +49 (0) 180-530 85 86 Email: europe.support@nsc.com Deutsch Tel: +49 (0) 69 9508 6208 English Tel: +44 (0) 870 24 0 2171 Francais Tel: +33 (0) 1 41 91 8790 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. National Semiconductor Asia Pacific Customer Response Group Tel: 65-2544466 Fax: 65-2504466 Email: ap.support@nsc.com National Semiconductor Japan Ltd. Tel: 81-3-5639-7560 Fax: 81-3-5639-7507 National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.