11
Product family data sheet
Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are
registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
WWW.CREE.COM/XLAMP
CLD-DS83 REV 6B
Cree® XLamp® XQ-E LEDs
XQ-E High Density LEDs
XQ-E High Intensity LEDs
PRODUCT DESCRIPTION
The XLamp® XQ-E LEDs are available
in two versions: high density and
high intensity. The XQ-E High Density
LED enables lighting manufacturers
to signicantly reduce the size and
total cost of their LED luminaires
versus similar performance 3.5-mm
footprint LEDs, without sacricing
lumen output, efcacy or reliability.
The XQ-E’s combination of optical
symmetry, consistent design across all
congurations and tiny 1.6mm X 1.6mm
footprint simplies manufacturing and
design while providing excellent color
mixing.
The new XQ-E High Intensity LED uses an
innovative primary optic design optimized
to deliver maximum candela, especially
through narrow-beam secondary optics.
FEATURES
• Cree’s smallest lighting class LED:
1.6mm X 1.6mm
• Available in high-density &
high-intensity versions for design
exibility
• Available in 70, 80, & 90 CRI white,
royal blue, blue, green, PC amber,
red-orange, red & photo red
• Maximum drive current: 1A (high
density & high intensity)
• Reow solderable - JEDEC
J-STD-020C compatible
• Unlimited oor life at
≤ 30°C/85% RH
• RoHS and REACh compliant
• UL® recognized component (E349212)
TABLE OF CONTENTS
Characteristics ............................................2
Flux Characteristics - High Density White .3
Flux Characteristics - High Density Color ..4
Flux Characteristics - High Intensity
White ...........................................................6
Flux Characteristics - High Intensity
Color.............................................................7
Relative Spectral Power Distribution .........9
Relative Flux vs. Junction
Temperature ............................................. 11
Electrical Characteristics ......................... 14
Relative Flux vs. Current .......................... 16
Typical Spatial Distribution ...................... 19
Thermal Design ........................................ 21
Reow Soldering Characteristics ............ 23
Notes ........................................................ 24
Mechanical Dimensions .......................... 26
Tape and Reel ........................................... 28
Packaging ................................................. 30
22
Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
2
XLamp® XQ-E LED
CHARACTERISTICS
Characteristics Unit Minimum Typical Maximum
Thermal resistance, junction to solder point - white, royal blue, blue °C/W 6
Thermal resistance, junction to solder point - green °C/W 9
Thermal resistance, junction to solder point - PC amber °C/W 8
Thermal resistance, junction to solder point - red-orange, red, photo red °C/W 5
Viewing angle (FWHM) - High Density white degrees 110
Viewing angle (FWHM) - High Density royal blue, blue, green, PC amber degrees 125
Viewing angle (FWHM) - High Density red-orange, red, photo red degrees 130
Viewing angle (FWHM) - High Intensity white degrees 120
Viewing angle (FWHM) - High Intensity royal blue, blue, green degrees 130
Viewing angle (FWHM) - High Intensity PC amber degrees 120
Viewing angle (FWHM) - High Intensity red-orange, red degrees 125
Temperature coefcient of voltage - white mV/°C -2.3
Temperature coefcient of voltage - royal blue, blue mV/°C -3.3
Temperature coefcient of voltage - green mV/°C -3.8
Temperature coefcient of voltage - PC amber mV/°C -3.3
Temperature coefcient of voltage - red-orange, red mV/°C -1.8
Temperature coefcient of voltage - photo red mV/°C -2.8
ESD withstand voltage (HBM per Mil-Std-883D)- High Density V 8000
ESD classication (HBM per Mil-Std-883D) - High Intensity Class 3A
DC forward current mA 1000
Reverse voltage V 5
Forward voltage (@ 350mA, 85°C) - white V2.9 3.25
Forward voltage (@ 350 mA, 25°C) - royal blue, blue V 3.1 3.5
Forward voltage (@ 350 mA, 25°C) - green V3.2 3.6
Forward voltage (@ 350 mA, 25°C) - PC amber V 3.1 3.5
Forward voltage (@ 350 mA, 25°C) - red-orange, red, photo red V2.2 2.6
LED junction temperature °C 150
33
Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
3
XLamp® XQ-E LED
FLUX CHARACTERISTICS - HIGH DENSITY WHITE (TJ
The following table provides several base order codes for XLamp XQ-E High Density white LEDs. It is important to note that the base
order codes listed here are a subset of the total available order codes for the product family. For more order codes, as well as a complete
description of the order-code nomenclature, please consult the XLamp XQ Family LEDs Binning and Labeling document.
Color
CCT Range 

Calculated Minimum

 Order Code
Minimum Maximum Group 


  
Cool White 5000 K 8300 K
R3 122 141 210 270 XQEAWT-00-0000-00000LFE1
R2 114 132 196 252 XQEAWT-00-0000-00000LEE1
70-CRI
White 3700 K 8300 K
R3 122 141 210 270 XQEAWT-00-0000-00000BFE1
R2 114 132 196 252 XQEAWT-00-0000-00000BEE1
Neutral
White 3700 K 5300 K
R2 114 132 196 252 XQEAWT-00-0000-00000LEE4
Q5 107 124 184 237 XQEAWT-00-0000-00000LDE4
Q4 100 116 172 221 XQEAWT-00-0000-00000LCE4
Warm White 2700 K 3500 K
Q5 107 124 184 237 XQEAWT-00-0000-00000LDE7
Q4 100 116 172 221 XQEAWT-00-0000-00000LCE7
Q3 93.9 109 162 208 XQEAWT-00-0000-00000LBE7
Q2 87.4 101 150 193 XQEAWT-00-0000-00000LAE7
80-CRI
White 2700 K 3500 K
Q5 107 124 184 237 XQEAWT-00-0000-00000HDE7
Q4 100 116 172 221 XQEAWT-00-0000-00000HCE7
Q3 93.9 109 162 208 XQEAWT-00-0000-00000HBE7
Q2 87.4 101 150 193 XQEAWT-00-0000-00000HAE7
90-CRI
White 2850K 3000 K
P4 80.6 93.3 139 178 XQEAWT-00-0000-00000U9E7
P3 73.9 85.5 127 163 XQEAWT-00-0000-00000U8E7
P2 67.2 77.8 116 149 XQEAWT-00-0000-00000U7E7
N4 62 71.7 107 137 XQEAWT-00-0000-00000U6E7
Notes:
• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on
CRI measurements. See the Measurements section (page 24).
• Typical CRI for Cool White (5000K – 8300K CCT) is 70.
• Typical CRI for Neutral White (3700K – 5300K CCT) is 75.
• Typical CRI for Warm White (2700K – 3500K CCT) is 80.
• Minimum CRI for 70-CRI White is 70.
• Minimum CRI for 80-CRI White is 80.
• Minimum CRI for 90-CRI White is 90.
* Flux values @ 25°C are calculated and for reference only.
** Calculated ux values at 700mA and 1A are for reference only.
44
Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
4
XLamp® XQ-E LED
FLUX CHARACTERISTICS - HIGH DENSITY COLOR (TJ
The following tables provide several base order codes for XLamp XQ-E High Density color LEDs. It is important to note that the base
order codes listed here are a subset of the total available order codes for the product family. For more order codes, as well as a complete
description of the order-code nomenclature, please consult the XLamp XQ Family LEDs Binning and Labeling document.
Color
Dominant Wavelength Range Minimum Radiant Flux
 Order Code
Minimum Maximum
Group DWL
 Group DWL
 Group 
Royal
Blue D36 450 D57 465
36 (Q) 600 XQEROY-00-0000-000000Q01
35 (P) 575 XQEROY-00-0000-000000P01
34 (N) 550 XQEROY-00-0000-000000N01
33 (M) 525 XQEROY-00-0000-000000M01
32 (L) 500 XQEROY-00-0000-000000L01
31 (K) 475 XQEROY-00-0000-000000K01
30 (J) 450 XQEROY-00-0000-000000J01
Color
Dominant Wavelength Range Minimum Luminous
 Order Code
Minimum Maximum
Group DWL
 Group DWL
 Group 
Blue B3 465 B6 485
M3 45.7 XQEBLU-00-0000-000000301
M2 39.8 XQEBLU-00-0000-000000201
K3 35.2 XQEBLU-00-0000-000000Z01
K2 30.6 XQEBLU-00-0000-000000Y01
Color
Dominant Wavelength Range Minimum Luminous
 Order Code
Minimum Maximum
Group DWL
 Group DWL
 Group 
Green G2 520 G4 535
R2 114 XQEGRN-00-0000-000000E01
Q5 107 XQEGRN-00-0000-000000D01
Q4 100 XQEGRN-00-0000-000000C01
Q3 93.9 XQEGRN-00-0000-000000B01
Note
• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 24).
55
Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
5
XLamp® XQ-E LED
Color Color Bin
Minimum Luminous Flux
 Order Code
Group 

PC Amber Y2
P4 80.6 XQEAPA-00-0000-000000901
P3 73.9 XQEAPA-00-0000-000000801
Color
Dominant Wavelength Range Minimum Luminous
 Order Code
Minimum Maximum
Group DWL
 Group DWL
 Group 
Red-
Orange O3 610 O4 620
Q3 93.9 XQERDO-00-0000-000000B01
Q2 87.4 XQERDO-00-0000-000000A01
P4 80.6 XQERDO-00-0000-000000901
P3 73.9 XQERDO-00-0000-000000801
P2 67.2 XQERDO-00-0000-000000701
Color
Dominant Wavelength Range Minimum Luminous
 Order Code
Minimum Maximum
Group DWL
 Group DWL
 Group 
Red R2 620 R3 630
P3 73.9 XQERED-00-0000-000000801
P2 67.2 XQERED-00-0000-000000701
N4 62 XQERED-00-0000-000000601
N3 56.8 XQERED-00-0000-000000501
Color
Peak Wavelength Range Minimum Radiant Flux
 Order Code
Min. Max.
Group PWL
 Group PWL
 Group 
Photo
Red P2 650 P5 670
14 350 XQEPHR-00-0000-000000901
13 300 XQEPHR-00-0000-000000801
FLUX CHARACTERISTICS - HIGH DENSITY COLOR (TJ
Note
• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 24).
66
Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
6
XLamp® XQ-E LED
FLUX CHARACTERISTICS - HIGH INTENSITY WHITE (TJ
The following table provides several base order codes for XLamp XQ-E High Intensity white LEDs. It is important to note that the base
order codes listed here are a subset of the total available order codes for the product family. For more order codes, as well as a complete
description of the order-code nomenclature, please consult the XLamp XQ Family LEDs Binning and Labeling document.
Color
CCT Range 

Calculated Minimum

 Order Code
Minimum Maximum Group 


  
Cool White 5000 K 8300 K
R3 122 136 213 276 XQEAWT-H0-0000-00000LFE1
R2 114 127 199 258 XQEAWT-H0-0000-00000LEE1
70-CRI
White 3700 K 8300 K
R3 122 136 213 276 XQEAWT-H0-0000-00000BFE1
R2 114 127 199 258 XQEAWT-H0-0000-00000BEE1
Neutral
White 3700 K 5300 K
R2 114 127 199 258 XQEAWT-H0-0000-00000LEE4
Q5 107 119 187 242 XQEAWT-H0-0000-00000LDE4
Q4 100 111 175 226 XQEAWT-H0-0000-00000LCE4
Warm White 2700 K 3500 K
Q5 107 119 187 242 XQEAWT-H0-0000-00000LDE7
Q4 100 111 175 226 XQEAWT-H0-0000-00000LCE7
Q3 93.9 105 164 213 XQEAWT-H0-0000-00000LBE7
80-CRI
White 2700 K 3500 K
Q5 107 119 187 242 XQEAWT-H0-0000-00000HDE7
Q4 100 111 175 226 XQEAWT-H0-0000-00000HCE7
Q3 93.9 105 164 213 XQEAWT-H0-0000-00000HBE7
90-CRI
White 2850K 3000 K
P4 80.6 89.9 141 182 XQEAWT-H0-0000-00000U9E7
P3 73.9 82.4 129 167 XQEAWT-H0-0000-00000U8E7
P2 67.2 74.9 117 152 XQEAWT-H0-0000-00000U7E7
Notes:
• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on
CRI measurements. See the Measurements section (page 24).
• Typical CRI for Cool White (5000K – 8300K CCT) is 70.
• Typical CRI for Neutral White (3700K – 5300K CCT) is 75.
• Typical CRI for Warm White (2700K – 3500K CCT) is 80.
• Minimum CRI for 70-CRI White is 70.
• Minimum CRI for 80-CRI White is 80.
• Minimum CRI for 90-CRI White is 90.
* Flux values @ 25°C are calculated and for reference only.
** Calculated ux values at 700mA and 1A are for reference only.
77
Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
7
XLamp® XQ-E LED
FLUX CHARACTERISTICS - HIGH INTENSITY COLOR (TJ
The following tables provide several base order codes for XLamp XQ-E High Intensity color LEDs. It is important to note that the base
order codes listed here are a subset of the total available order codes for the product family. For more order codes, as well as a complete
description of the order-code nomenclature, please consult the XLamp XQ Family LEDs Binning and Labeling document.
Color
Dominant Wavelength Range Minimum Radiant Flux
 Order Code
Minimum Maximum
Group DWL
 Group DWL
 Group 
Royal
Blue D36 450 D57 465
35 (P) 575 XQEROY-H0-0000-000000P01
34 (N) 550 XQEROY-H0-0000-000000N01
33 (M) 525 XQEROY-H0-0000-000000M01
Color
Dominant Wavelength Range Minimum Luminous
 Order Code
Minimum Maximum
Group DWL
 Group DWL
 Group 
Blue B3 465 B6 485
M2 39.8 XQEBLU-H0-0000-000000201
K3 35.2 XQEBLU-H0-0000-000000Z01
K2 30.6 XQEBLU-H0-0000-000000Y01
Color
Dominant Wavelength Range Minimum Luminous
 Order Code
Minimum Maximum
Group DWL
 Group DWL
 Group 
Green G2 520 G4 535
Q5 107 XQEGRN-H0-0000-000000D01
Q4 100 XQEGRN-H0-0000-000000C01
Q3 93.9 XQEGRN-H0-0000-000000B01
Q2 87.4 XQEGRN-H0-0000-000000A01
P4 80.6 XQEGRN-H0-0000-000000901
Color Color Bin
Minimum Luminous Flux
 Order Code
Group 

PC Amber Y2
P3 73.9 XQEAPA-H0-0000-000000801
P2 67.2 XQEAPA-H0-0000-000000701
Note
• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 24).
88
Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
8
XLamp® XQ-E LED
Color
Dominant Wavelength Range Minimum Luminous
 Order Code
Minimum Maximum
Group DWL
 Group DWL
 Group 
Red-
Orange O3 610 O4 620
P3 73.9 XQERDO-H0-0000-000000801
P2 67.2 XQERDO-H0-0000-000000701
N4 62 XQERDO-H0-0000-000000601
Color
Dominant Wavelength Range Minimum Luminous
 Order Code
Minimum Maximum
Group DWL
 Group DWL
 Group 
Red R2 620 R3 630
N2 51.7 XQERED-H0-0000-000000401
M3 45.7 XQERED-H0-0000-000000301
FLUX CHARACTERISTICS - HIGH INTENSITY COLOR (TJ
Note
• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 24).
99
Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
9
XLamp® XQ-E LED
RELATIVE SPECTRAL POWER DISTRIBUTION
High Density
High Density Color
Relative Spectral Power
high density
0%
20%
40%
60%
80%
100%
380 430 480 530 580 630 680 730 780
Relative Radiant Power
Wavelength (nm)
3000 K, 80 CRI
Relative Spectral Power
high density
0%
20%
40%
60%
80%
100%
380 430 480 530 580 630 680 730 780
Relative Radiant Power
Wavelength (nm)
Royal Blue
Blue
Green
PC Amber
Red-Orange
Red
Photo Red
1010
Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
10
XLamp® XQ-E LED
RELATIVE SPECTRAL POWER DISTRIBUTION - CONTINUED
High Intensity
High Intensity Color
Relative Spectral Power
high intensity
0%
20%
40%
60%
80%
100%
380 430 480 530 580 630 680 730 780
Relative Radiant Power
Wavelength (nm)
3000 K, 80 CRI
0%
20%
40%
60%
80%
380 430 480 530 580 630 680 730 780
Relative Radiant Power
Wavelength (nm)
Royal Blue
Blue
Green
PC Amber
Red-Orange
Red
1111
Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
11
XLamp® XQ-E LED
RELATIVE FLUX VS. JUNCTION TEMPERATURE (IFm
High Density
High Density Color
Relative Flux Output vs. Junction Temperature
high density
0%
20%
40%
60%
80%
100%
120%
25 50 75 100 125 150
Relative Luminous Flux
Junction Temperature (ºC)
White
Relative Flux Output vs. Junction Temperature
high density
0%
20%
40%
60%
80%
100%
120%
25 50 75 100 125 150
Relative Radiant Flux
Junction Temperature (ºC)
Royal Blue
Photo Red
1212
Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
12
XLamp® XQ-E LED
RELATIVE FLUX VS. JUNCTION TEMPERATURE (IFm
High Density Color
High Intensity
Relative Flux Output vs. Junction Temperature
high density
0%
20%
40%
60%
80%
100%
120%
25 50 75 100 125 150
Relative Luminous Flux
Junction Temperature (ºC)
Blue
Green
PC Amber
Red-Orange
Red
Relative Flux Output vs. Junction Temperature
high intensity
0%
20%
40%
60%
80%
100%
120%
25 50 75 100 125 150
Relative Luminous Flux
Junction Temperature (ºC)
White
1313
Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
13
XLamp® XQ-E LED
RELATIVE FLUX VS. JUNCTION TEMPERATURE (IFm
High Intensity Color
High Intensity Color
Relative Flux Output vs. Junction Temperature
high intensity
0%
20%
40%
60%
80%
100%
120%
25 50 75 100 125 150
Relative Radiant Flux
Junction Temperature (ºC)
Royal Blue
Relative Flux Output vs. Junction Temperature
high intensity
0%
20%
40%
60%
80%
100%
120%
25 50 75 100 125 150
Relative Luminous Flux
Junction Temperature (ºC)
Blue
Green
PC Amber
Red-Orange
Red
1414
Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
14
XLamp® XQ-E LED
ELECTRICAL CHARACTERISTICS (TJ
High Density
High Density Color
Electrical Characteristics (Tj = 85ºC)
high density
0
200
400
600
800
1000
1.90 2.10 2.30 2.50 2.70 2.90 3.10 3.30 3.50 3.70
Forward Current (mA)
Forward Voltage (V)
White
Electrical Characteristics (Tj = 85ºC)
high density
0
200
400
600
800
1000
1.90 2.10 2.30 2.50 2.70 2.90 3.10 3.30 3.50 3.70
Forward Current (mA)
Forward Voltage (V)
Royal Blue, Blue
Green
PC Amber
Red-Orange, Red,
Photo Red
1515
Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
15
XLamp® XQ-E LED
ELECTRICAL CHARACTERISTICS (TJ
High Intensity
High Intensity Color
Electrical Characteristics (Tj = 85ºC)
high intensity
0
200
400
600
800
1000
1.90 2.10 2.30 2.50 2.70 2.90 3.10 3.30 3.50 3.70
Forward Current (mA)
Forward Voltage (V)
White
Electrical Characteristics (Tj = 85ºC)
high intensity
0
200
400
600
800
1000
1.90 2.10 2.30 2.50 2.70 2.90 3.10 3.30 3.50 3.70
Forward Current (mA)
Forward Voltage (V)
Royal Blue, Blue
Green
PC Amber
Red-Orange, Red
1616
Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
16
XLamp® XQ-E LED
RELATIVE FLUX VS. CURRENT (TJ
High Density
High Density Color
Relative Intensity vs. Current (Tj = 85ºC)
high density
0%
50%
100%
150%
200%
250%
0 100 200 300 400 500 600 700 800 900 1000
Relative Luminous Flux
Forward Current (mA)
White
Relative Intensity vs. Current (Tj = 85ºC)
high density
0%
50%
100%
150%
200%
250%
300%
0 100 200 300 400 500 600 700 800 900 1000
Relative Radiant Flux
Forward Current (mA)
Royal Blue
Photo Red
1717
Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
17
XLamp® XQ-E LED
RELATIVE FLUX VS. CURRENT (TJ
High Density Color
High Intensity
Relative Intensity vs. Current (Tj = 85ºC)
high density
0%
50%
100%
150%
200%
250%
300%
0 100 200 300 400 500 600 700 800 900 1000
Relative Luminous Flux
Forward Current (mA)
Blue
Green
PC Amber
Red-Orange
Red
Relative Intensity vs. Current (Tj = 85ºC)
high intensity
0%
50%
100%
150%
200%
250%
0 100 200 300 400 500 600 700 800 900 1000
Relative Luminous Flux
Forward Current (mA)
White
1818
Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
18
XLamp® XQ-E LED
RELATIVE FLUX VS. CURRENT (TJ
High Intensity Color
High Intensity Color
Relative Intensity vs. Current (Tj = 85ºC)
high intensity
0%
50%
100%
150%
200%
250%
0 100 200 300 400 500 600 700 800 900 1000
Relative Radiant Flux
Forward Current (mA)
Royal Blue
Relative Intensity vs. Current (Tj = 85ºC)
high intensity
0%
50%
100%
150%
200%
250%
300%
0 100 200 300 400 500 600 700 800 900 1000
Relative Luminous Flux
Forward Current (mA)
Blue
Green
PC Amber
Red-Orange
Red
1919
Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
19
XLamp® XQ-E LED
TYPICAL SPATIAL DISTRIBUTION
High Density
High Density Color
Typical Spatial Radiation Pattern-white
high density
0%
20%
40%
60%
80%
100%
-90 -70 -50 -30 -10 10 30 50 70 90
Relative Luminous Intensity
Angle (º)
White
Typical Spatial Radiation Pattern-royal blue, blue, green, amber, red-orange, red
high density
0%
20%
40%
60%
80%
100%
-90 -70 -50 -30 -10 10 30 50 70 90
Relative Luminous Intensity
Angle (º)
Royal Blue, Blue,
Green
PC Amber
Red-Orange, Red,
Photo Red
2020
Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
20
XLamp® XQ-E LED
TYPICAL SPATIAL DISTRIBUTION - CONTINUED
High Intensity
High Intensity Color
Typical Spatial Radiation Pattern-white
high intensity
0%
20%
40%
60%
80%
100%
-90 -70 -50 -30 -10 10 30 50 70 90
Relative Luminous Intensity
Angle (º)
White
Typical Spatial Radiation Pattern-royal blue, blue, green, amber, red-orange, red
high intensity
0%
20%
40%
60%
80%
100%
-90 -70 -50 -30 -10 10 30 50 70 90
Relative Luminous Intensity
Angle (º)
Royal Blue, Blue,
Green
PC Amber
Red-Orange, Red
2121
Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
21
XLamp® XQ-E LED
THERMAL DESIGN
The maximum forward current is determined by the thermal resistance between the LED junction and ambient. It is crucial for the end
product to be designed in a manner that minimizes the thermal resistance from the solder point to ambient in order to optimize lamp life
and optical characteristics.
High Density
White Royal Blue, Blue
Green PC Amber
Red-Orange, Red Photo Red
Thermal Design - white
high density & high intensity
0
200
400
600
800
1000
1200
0 20 40 60 80 100 120 140 160
Maximum Current (mA)
Ambient Temperature (ºC)
Rj-a = 10°C/W
Rj-a = 15°C/W
Rj-a = 20°C/W
Rj-a = 25°C/W
Thermal Design - royal blue, blue
high density & high intensity
0
200
400
600
800
1000
1200
0 20 40 60 80 100 120 140 160
Maximum Current (mA)
Ambient Temperature (ºC)
Rj-a = 10°C/W
Rj-a = 15°C/W
Rj-a = 20°C/W
Rj-a = 25°C/W
Thermal Design - PC amber
high density & high intensity
0
200
400
600
800
1000
1200
0 20 40 60 80 100 120 140 160
Maximum Current (mA)
Ambient Temperature (ºC)
Rj-a = 15°C/W
Rj-a = 20°C/W
Rj-a = 25°C/W
Rj-a = 30°C/W
Thermal Design - green
high density
0
200
400
600
800
1000
1200
0 20 40 60 80 100 120 140 160
Maximum Current (mA)
Ambient Temperature (ºC)
Rj-a = 15°C/W
Rj-a = 20°C/W
Rj-a = 25°C/W
Rj-a = 30°C/W
Thermal Design - photo red
high density
0
200
400
600
800
1000
1200
0 20 40 60 80 100 120 140 160
Maximum Current (mA)
Ambient Temperature (ºC)
Rj-a = 10°C/W
Rj-a = 15°C/W
Rj-a = 20°C/W
Rj-a = 25°C/W
Thermal Design - red-orange, red
high density & high intensity
0
200
400
600
800
1000
1200
0 20 40 60 80 100 120 140 160
Maximum Current (mA)
Ambient Temperature (ºC)
Rj-a = 10°C/W
Rj-a = 15°C/W
Rj-a = 20°C/W
Rj-a = 25°C/W
2222
Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
22
XLamp® XQ-E LED
THERMAL DESIGN - CONTINUED
The maximum forward current is determined by the thermal resistance between the LED junction and ambient. It is crucial for the end
product to be designed in a manner that minimizes the thermal resistance from the solder point to ambient in order to optimize lamp life
and optical characteristics.
High Intensity
White Royal Blue, Blue
Green PC Amber
Red-Orange, Red
Thermal Design - white
high density & high intensity
0
200
400
600
800
1000
1200
0 20 40 60 80 100 120 140 160
Maximum Current (mA)
Ambient Temperature (ºC)
Rj-a = 10°C/W
Rj-a = 15°C/W
Rj-a = 20°C/W
Rj-a = 25°C/W
Thermal Design - royal blue, blue
high density & high intensity
0
200
400
600
800
1000
1200
0 20 40 60 80 100 120 140 160
Maximum Current (mA)
Ambient Temperature (ºC)
Rj-a = 10°C/W
Rj-a = 15°C/W
Rj-a = 20°C/W
Rj-a = 25°C/W
Thermal Design - PC amber
high density & high intensity
0
200
400
600
800
1000
1200
0 20 40 60 80 100 120 140 160
Maximum Current (mA)
Ambient Temperature (ºC)
Rj-a = 15°C/W
Rj-a = 20°C/W
Rj-a = 25°C/W
Rj-a = 30°C/W
Thermal Design - green
high intensity
0
200
400
600
800
1000
1200
0 20 40 60 80 100 120 140 160
Maximum Current (mA)
Ambient Temperature (ºC)
Rj-a = 15°C/W
Rj-a = 20°C/W
Rj-a = 25°C/W
Rj-a = 30°C/W
Thermal Design - red-orange, red
high density & high intensity
0
200
400
600
800
1000
1200
0 20 40 60 80 100 120 140 160
Maximum Current (mA)
Ambient Temperature (ºC)
Rj-a = 10°C/W
Rj-a = 15°C/W
Rj-a = 20°C/W
Rj-a = 25°C/W
2323
Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
23
XLamp® XQ-E LED
REFLOW SOLDERING CHARACTERISTICS
In testing, Cree has found XLamp XQ-E LEDs to be compatible with JEDEC J-STD-020C, using the parameters listed below. As a general
guideline, Cree recommends that users follow the recommended soldering prole provided by the manufacturer of the solder paste used.
Note that this general guideline may not apply to all PCB designs and congurations of reow soldering equipment.
Profile Feature Lead-Free Solder
Average Ramp-Up Rate (Tsmax to Tp) 1.2°C/second
Preheat: Temperature Min (Tsmin) 120 °C
Preheat: Temperature Max (Tsmax)170 °C
Preheat: Time (tsmin to tsmax) 65-150 seconds
Time Maintained Above: Temperature (TL)217 °C
Time Maintained Above: Time (tL)45-90 seconds
Peak/Classication Temperature (Tp) 235 - 245 °C
Time Within 5°C of Actual Peak Temperature (tp) 20-40 seconds
Ramp-Down Rate 1 - 6 °C/second
Time 25°C to Peak Temperature 4 minutes max.
Note: All temperatures refer to topside of the package, measured on the package body surface.
IPC/JEDEC J-STD-020C
TP
TL
Temperature
Time
t 25˚C to Peak
Preheat
ts
tS
tP
25
Ramp-down
Ramp-up
Critical Zone
TL to TP
Tsmax
Tsmin
2424
Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
24
XLamp® XQ-E LED
NOTES
Measurements
The luminous ux, radiant power, chromaticity and CRI measurements in this document are binning specications only and solely
represent product measurements as of the date of shipment. These measurements will change over time based on a number of factors
that are not within Cree’s control and are not intended or provided as operational specications for the products. Calculated values are
provided for informational purposes only and are not intended as specications.

Please read the LED Reliability Overview for details of the qualication process Cree applies to ensure long-term reliability for XLamp
LEDs and details of Cree’s pre-release qualication testing for XLamp LEDs.
Lumen Maintenance
Cree now uses standardized IES LM-80-08 and TM-21-11 methods for collecting long-term data and extrapolating LED lumen maintenance.
For information on the specic LM-80 data sets available for this LED, refer to the public LM-80 results document.
Please read the Long-Term Lumen Maintenance application note for more details on Cree’s lumen maintenance testing and forecasting.
Please read the Thermal Management application note for details on how thermal design, ambient temperature, and drive current affect
the LED junction temperature.
Moisture Sensitivity
Cree recommends keeping XLamp LEDs in the provided, resealable moisture-barrier packaging (MBP) until immediately prior to soldering.
Unopened MBPs that contain XLamp LEDs do not need special storage for moisture sensitivity.
Once the MBP is opened, XLamp XQ-E LEDs may be stored as MSL 1 per JEDEC J-STD-033, meaning they have unlimited oor life in
conditions of ≤ 30 ºC/85% relative humidity (RH). Regardless of storage condition, Cree recommends sealing any unsoldered LEDs in the
original MBP.
RoHS Compliance
The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold
limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as
implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree representative or from the Product
Documentation sections of www.cree.com.
REACh Compliance
REACh substances of very high concern (SVHCs) information is available for this product. Since the European Chemical Agency (ECHA)
has published notice of their intent to frequently revise the SVHC listing for the foreseeable future, please contact a Cree representative to
insure you get the most up-to-date REACh SVHC Declaration. REACh banned substance information (REACh Article 67) is also available
upon request.
2525
Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
25
XLamp® XQ-E LED
UL® Recognized Component
Level 1 enclosure consideration. The LED package or a portion thereof has not been investigated as a re enclosure or a re and electrical
enclosure per ANSI/UL 8750.
Vision Advisory
WARNING: Do not look at an exposed lamp in operation. Eye injury can result. For more information about LEDs and eye safety, please
refer to the LED Eye Safety application note.
NOTES - CONTINUED
2626
Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
26
XLamp® XQ-E LED
MECHANICAL DIMENSIONS
Thermal vias, if present, are not shown on these drawings.
All dimensions in mm.
Measurement tolerances unless indicated otherwise: ±.13 mm
High Density
XQEAWT-x-xxxx-xxxxxxxxx
XQ-E High Density
High Intensity
XQEAWT-Hx-xxxx-xxxxxxxxx
XQ-E High Intensity
.
SIZE
TITLE
OF
REV.
SHEET
C
DRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
THIRD ANGLE PROJECTION
SCALE
A
B
C
D
123456
6 5 4 3 2 1
A
B
C
D
Phone (919) 313-5300
Fax (919) 313-5558
4600 Silicon Drive
Durham, N.C 27703
UNAUTHORIZED PERSON WITHOUT
THE WRITTEN CONSENT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
CONTAINED WITHIN ARE THE PROPRIETARY AND
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
OF CREE INC.
NOTICE
X° ± .5°
.XXX ± .25
.XX ± .75
.X ± 1.5
FOR SHEET METAL PARTS ONLY
.XX ± .25
.XXX ± .125
X° ± .5°
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN
MILLIMETERS AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
SURFACE FINISH:
1.6
.30
1.60
.65
1.60
.30
1.50
3.300
3.30
1.60
1.60
1.60
1.50
.60 .60
.30
R.936
.38
.44
1/145.000
D
2610-00035
XQE_XQA OUTLINE
--
--
7/19/13J. Nevins
----
7/19/13D. Seibel
REVISONS
REV DESCRIPTION BY DATE APP'D
A Initial Release DDS 7/19/13
B UPDATED OVERALL COMPONENT HEIGHT
DC 6/9/15
CADDED OPTICAL REF. DC 12/8/15YC
DCHANGED HEIGHT TO BLEND XQE/XQA TOGETHER
DC 12/17/15
SL
RECOMMENDED PC BOARD SOLDER PAD
RECOMMENDED TRACE LAYOUT
ALL DIMENSIONS ARE ± .13MM UNLESS OTHERWIDE NOTED
OPTICAL REFERENCE
SOLDER PAD
REFERENCE
OPTICAL REFERENCE
NOTCH IS ON
CATHODE(-) SIDE
Top View Side View Bottom View
SIZE
TITLE
OF
REV.
SHEET
C
DRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
THIRD ANGLE PROJECTION
SCALE
A
B
C
D
123456
6 5 4 3 2 1
A
B
C
D
Phone (919) 313-5300
Fax (919) 313-5558
4600 Silicon Drive
Durham, N.C 27703
UNAUTHORIZED PERSON WITHOUT
THE WRITTEN CONSENT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
CONTAINED WITHIN ARE THE PROPRIETARY AND
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
OF CREE INC.
NOTICE
X° ± .5°
.XXX ± .25
.XX ± .75
.X ± 1.5
FOR SHEET METAL PARTS ONLY
.XX ± .25
.XXX ± .125
X° ± .5°
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN
MILLIMETERS AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
SURFACE FINISH:
1.6
.30
1.60
.65
1.60
.30
1.50
3.300
3.30
1.60
1.60
1.60
1.50
.60 .60
.30
R.936
.38
.44
1/145.000
D
2610-00035
XQE_XQA OUTLINE
--
--
7/19/13J. Nevins
----
7/19/13D. Seibel
REVISONS
REV DESCRIPTION BY DATE APP'D
A Initial Release DDS 7/19/13
B UPDATED OVERALL COMPONENT HEIGHT
DC 6/9/15
CADDED OPTICAL REF. DC 12/8/15YC
DCHANGED HEIGHT TO BLEND XQE/XQA TOGETHER
DC 12/17/15
SL
RECOMMENDED PC BOARD SOLDER PAD
RECOMMENDED TRACE LAYOUT
ALL DIMENSIONS ARE ± .13MM UNLESS OTHERWIDE NOTED
OPTICAL REFERENCE
SOLDER PAD
REFERENCE
OPTICAL REFERENCE
NOTCH IS ON
CATHODE(-) SIDE
SIZE
TITLE
OF
REV.
SHEET
C
DRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
THIRD ANGLE PROJECTION
SCALE
A
B
C
D
123456
6 5 4 3 2 1
A
B
C
D
Phone (919) 313-5300
Fax (919) 313-5558
4600 Silicon Drive
Durham, N.C 27703
UNAUTHORIZED PERSON WITHOUT
THE WRITTEN CONSENT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
CONTAINED WITHIN ARE THE PROPRIETARY AND
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
OF CREE INC.
NOTICE
X° ± .5°
.XXX ± .25
.XX ± .75
.X ± 1.5
FOR SHEET METAL PARTS ONLY
.XX ± .25
.XXX ± .125
X° ± .5°
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN
MILLIMETERS AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
SURFACE FINISH:
1.6
.30
1.60
.65
1.60
.30
1.50
3.300
3.30
1.60
1.60
1.60
1.50
.60 .60
.30
R.936
.38
.44
1/145.000
D
2610-00035
XQE_XQA OUTLINE
--
--
7/19/13J. Nevins
----
7/19/13D. Seibel
REVISONS
REV DESCRIPTION BY DATE APP'D
A Initial Release DDS 7/19/13
BUPDATED OVERALL COMPONENT HEIGHT
DC 6/9/15
CADDED OPTICAL REF. DC 12/8/15YC
DCHANGED HEIGHT TO BLEND XQE/XQA TOGETHER
DC 12/17/15
SL
RECOMMENDED PC BOARD SOLDER PAD
RECOMMENDED TRACE LAYOUT
ALL DIMENSIONS ARE ± .13MM UNLESS OTHERWIDE NOTED
OPTICAL REFERENCE
SOLDER PAD
REFERENCE
OPTICAL REFERENCE
NOTCH IS ON
CATHODE(-) SIDE
Optical Reference
Optical Reference
Notch is on
cathode (-)
side
Top View Side View Bottom View
Anode (+)
SIZE
TITLE
OF
REV.
SHEET
C
DRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
THIRD ANGLE PROJECTION
SCALE
A
B
C
D
123456
6 5 4 3 2 1
A
B
C
D
Phone (919) 313-5300
Fax (919) 313-5558
4600 Silicon Drive
Durham, N.C 27703
UNAUTHORIZED PERSON WITHOUT
THE WRITTEN CONSENT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
CONTAINED WITHIN ARE THE PROPRIETARY AND
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
OF CREE INC.
NOTICE
X° ± .5°
.XXX ± .25
.XX ± .75
.X ± 1.5
FOR SHEET METAL PARTS ONLY
.XX ± .25
.XXX ± .125
X° ± .5°
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN
MILLIMETERS AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
SURFACE FINISH:
1.6
1.60
1.60
.80
±.10
.60
1.50
.30
1.50
.30
1.60
.65
1.60
.300
1.500
3.300
3.300
1/145.000
B
2610-00062
XQE Hi OUTLINE
--
--
----
----
5/19/15D. CRONIN
REVISONS
REV DESCRIPTION BY DATE APP'D
B ADDED ANODE NOTE AND TEXT DC 8/6/15
RECOMMENDED PC BOARD SOLDER PAD
RECOMMENDED TRACE LAYOUT
DIMENSIONS ARE ± .13 UNLESS OTHERWISE NOTED
OPTICAL
REFERENCE
SOLDER PAD
REFERENCE
OPTICAL
REFERENCE
SIZE
TITLE
OF
REV.
SHEET
C
DRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
THIRD ANGLE PROJECTION
SCALE
A
B
C
D
123456
6 5 4 3 2 1
A
B
C
D
Phone (919) 313-5300
Fax (919) 313-5558
4600 Silicon Drive
Durham, N.C 27703
UNAUTHORIZED PERSON WITHOUT
THE WRITTEN CONSENT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
CONTAINED WITHIN ARE THE PROPRIETARY AND
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
OF CREE INC.
NOTICE
X° ± .5°
.XXX ± .25
.XX ± .75
.X ± 1.5
FOR SHEET METAL PARTS ONLY
.XX ± .25
.XXX ± .125
X° ± .5°
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN
MILLIMETERS AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
SURFACE FINISH:
1.6
1.60
1.60
.80
±.10
.60
1.50
.30
1.50
.30
1.60
.65
1.60
.300
1.500
3.300
3.300
1/145.000
B
2610-00062
XQE Hi OUTLINE
--
--
----
----
5/19/15D. CRONIN
REVISONS
REV DESCRIPTION BY DATE APP'D
B ADDED ANODE NOTE AND TEXT DC 8/6/15
RECOMMENDED PC BOARD SOLDER PAD
RECOMMENDED TRACE LAYOUT
DIMENSIONS ARE ± .13 UNLESS OTHERWISE NOTED
OPTICAL
REFERENCE
SOLDER PAD
REFERENCE
OPTICAL
REFERENCE
Optical Reference
Optical
Reference
2727
Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
27
XLamp® XQ-E LED
MECHANICAL DIMENSIONS - CONTINUED
High Density & High Intensity
SIZE
TITLE
OF
REV.
SHEET
C
DRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
THIRD ANGLE PROJECTION
SCALE
A
B
C
D
123456
6 5 4 3 2 1
A
B
C
D
Phone (919) 313-5300
Fax (919) 313-5558
4600 Silicon Drive
Durham, N.C 27703
UNAUTHORIZED PERSON WITHOUT
THE WRITTEN CONSENT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
CONTAINED WITHIN ARE THE PROPRIETARY AND
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
OF CREE INC.
NOTICE
X° ± .5°
.XXX ± .25
.XX ± .75
.X ± 1.5
FOR SHEET METAL PARTS ONLY
.XX ± .25
.XXX ± .125
X° ± .5°
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN
MILLIMETERS AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
SURFACE FINISH:
1.6
.30
1.60
.65
1.60
.30
1.50
3.300
3.30
1.60
1.60
1.60
1.50
.60 .60
.30
R.936
.38
.44
1/145.000
D
2610-00035
XQE_XQA OUTLINE
--
--
7/19/13J. Nevins
----
7/19/13D. Seibel
REVISONS
REV DESCRIPTION BY DATE APP'D
A Initial Release DDS 7/19/13
BUPDATED OVERALL COMPONENT HEIGHT
DC 6/9/15
CADDED OPTICAL REF. DC 12/8/15YC
DCHANGED HEIGHT TO BLEND XQE/XQA TOGETHER
DC 12/17/15
SL
RECOMMENDED PC BOARD SOLDER PAD
RECOMMENDED TRACE LAYOUT
ALL DIMENSIONS ARE ± .13MM UNLESS OTHERWIDE NOTED
OPTICAL REFERENCE
SOLDER PAD
REFERENCE
OPTICAL REFERENCE
NOTCH IS ON
CATHODE(-) SIDE
Recommended trace layout
Recommended PCB solder pad
SIZE
TITLE
OF
REV.
SHEET
C
DRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
THIRD ANGLE PROJECTION
SCALE
A
B
C
D
123456
6 5 4 3 2 1
A
B
C
D
Phone (919) 313-5300
Fax (919) 313-5558
4600 Silicon Drive
Durham, N.C 27703
UNAUTHORIZED PERSON WITHOUT
THE WRITTEN CONSENT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
CONTAINED WITHIN ARE THE PROPRIETARY AND
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
OF CREE INC.
NOTICE
X° ± .5°
.XXX ± .25
.XX ± .75
.X ± 1.5
FOR SHEET METAL PARTS ONLY
.XX ± .25
.XXX ± .125
X° ± .5°
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN
MILLIMETERS AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
SURFACE FINISH:
1.6
.30
1.60
.65
1.60
.30
1.50
3.300
3.30
1.60
1.60
1.60
1.50
.60 .60
.30
R.936
.38
.44
1/145.000
D
2610-00035
XQE_XQA OUTLINE
--
--
7/19/13J. Nevins
----
7/19/13D. Seibel
REVISONS
REV DESCRIPTION BY DATE APP'D
A Initial Release DDS 7/19/13
BUPDATED OVERALL COMPONENT HEIGHT
DC 6/9/15
CADDED OPTICAL REF. DC 12/8/15YC
DCHANGED HEIGHT TO BLEND XQE/XQA TOGETHER
DC 12/17/15
SL
RECOMMENDED PC BOARD SOLDER PAD
RECOMMENDED TRACE LAYOUT
ALL DIMENSIONS ARE ± .13MM UNLESS OTHERWIDE NOTED
OPTICAL REFERENCE
SOLDER PAD
REFERENCE
OPTICAL REFERENCE
NOTCH IS ON
CATHODE(-) SIDE
Solder pad
reference
2828
Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
28
XLamp® XQ-E LED
TAPE AND REEL
All Cree carrier tapes conform to EIA-481D, Automated Component Handling Systems Standard.
Except as noted, all dimensions in mm [in].
Measurement tolerances unless indicated otherwise: .xx = ±.10 mm
High Density
XQEAWT-x-xxxx-xxxxxxxxx
XQ-E High Density
High Intensity
XQEAWT-Hx-xxxx-xxxxxxxxx
XQ-E High Intensity
SIZE
TITLE
OF
REV.
SHEET
C
DRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
THIRD ANGLE PROJECTION
SCALE
A
B
C
D
123456
6 5 4 3 2 1
A
B
C
D
Phone (919) 313-5300
Fax (919) 313-5558
4600 Silicon Drive
Durham, N.C 27703
UNAUTHORIZED PERSON WITHOUT
THE WRITTEN CONSENT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
CONTAINED WITHIN ARE THE PROPRIETARY AND
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
OF CREE INC.
NOTICE
X° ± .5 °
.XXX ± .25
.XX ± .75
.X ± 1.5
FOR SHEET METAL PARTS ONLY
.XX ± .25
.XXX ± .125
X° ± .5 °
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN
MILLIMETERS AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
SURFACE FINISH:
1.6
A
A
.30 ± .10
3.50 ±.10
1.85
1.65
1.750
8.000
NOMINAL
8.30
MAX
1.000
+.10
-.00
1.500
4.000
2.000
REVISONS
REV DESCRIPTION BY DATE APP'D
1/14.000
A
2402-00023
Carrier Tape, 1.7X1.7 XPQ
5/31/12D. CRONIN
Notes:
1. 10 sprocket hole pitch cumulative tolerance ± 0.2mm
REFERENCE VENDOR PART NUMBER 021142
CATHODE SIDE
ANODE SIDE
1.85 [.073]
Bo
.30 [.012]
T
3.0°
8.00 [.315]
NOMINAL
8.30 [.327]
MAX
W
6.25
[.246]
E2
Ø1.00
[.039]
D1
3.50 [.138] F
1.75 [.069]
E2
Ø1.50
+.10/-.00
[+.0039/-.0000]
4.00 [.157]
Po
2.00 [.079]
P2
4.00 [.157]
P1.98 [.078]
1.85 [.073]
Ao
3.0°
1.20 [.047]
Ko
POCKET SIZE
1.85 mm [.073”]
1.85 mm [.073”]
1.20 mm [.047”]
Ao
Bo
Ko
CATHODE SIDE
ANODE SIDE
1.85 [.073]
Bo
.30 [.012]
T
3.0°
8.00 [.315]
NOMINAL
8.30 [.327]
MAX
W
6.25
[.246]
E2
Ø1.00
[.039]
D1
3.50 [.138] F
1.75 [.069]
E2
Ø1.50
+.10/-.00
[+.0039/-.0000]
4.00 [.157]
Po
2.00 [.079]
P2
4.00 [.157]
P1.98 [.078]
1.85 [.073]
Ao
3.0°
1.20 [.047]
Ko
POCKET SIZE
1.85 mm [.073”]
1.85 mm [.073”]
1.20 mm [.047”]
Ao
Bo
Ko
CATHODE SIDE
ANODE SIDE
1.85 [.073]
Bo
.30 [.012]
T
3.0°
8.00 [.315]
NOMINAL
8.30 [.327]
MAX
W
6.25
[.246]
E2
Ø1.00
[.039]
D1
3.50 [.138] F
1.75 [.069]
E2
Ø1.50
+.10/-.00
[+.0039/-.0000]
4.00 [.157]
Po
2.00 [.079]
P2
4.00 [.157]
P1.98 [.078]
1.85 [.073]
Ao
3.0°
1.20 [.047]
Ko
POCKET SIZE
1.85 mm [.073”]
1.85 mm [.073”]
1.20 mm [.047”]
Ao
Bo
Ko
CATHODE SIDE
ANODE SIDE
2929
Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
29
XLamp® XQ-E LED
TAPE AND REEL - CONTINUED
High Density & High Intensity
Loaded Pockets
(XQ-E High Density - 2,000 Lamps
XQ-E High Intensity - 3,000 Lamps)
Leader
400 mm (min) of
empty pockets with
at least 100 mm
sealed by tape
(50 empty pockets min.)
Trailer
160 mm (min) of
empty pockets
sealed with tape
(20 pockets min.)
START
END
13
mm
7"
Cover Tape
Pocket Tape
User Feed Direction
User Feed Direction
3030
Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
30
XLamp® XQ-E LED
PACKAGING
The diagrams below show the packaging and labels Cree uses to ship XLamp XQ-E LEDs. XLamp XQ-E LEDs are shipped in tape loaded
on a reel. Each box contains only one reel in a moisture barrier bag.
Patent Label
(on bottom of box)
Label with Cree Bin Code,
Quantity, Reel ID
Label with Cree Bin Code,
Quantity, Reel ID
Label with Cree Order Code,
Quantity, Reel ID, PO #
Label with Cree Order Code,
Quantity, Reel ID, PO #
Label with Cree Bin Code,
Quantity, Reel ID
Unpackaged Reel
Packaged Reel
Boxed Reel
CREE Bin Code
& Barcode Label
Vacuum-Sealed
Moisture Barrier Bag
Label with Customer
P/N, Qty, Lot #, PO #
Label with Cree Bin
Code, Qty, Lot #
Label with Cree Bin
Code, Qty, Lot #
Vacuum-Sealed
Moisture Barrier Bag
Patent Label
Label with Customer Order
Code, Qty, Reel ID, PO #