MLRR-3 Features and Benefits
DIMENSIONS (in) mm
Notes 1) For details on electrical specifications, contact Hamlin.
2) Contact rating-Product of the switching voltage and current should never exceed the
wattage rating.
Contact Hamlin for additional load/life information.
3) Operate (inc. bounce) /Release Time-per EIA/NARM RS421A, diode suppressed coil.
4) Pull in Range-Contact Hamlin for tolerances available within this range.
5) Rating Sensitivity-The value at which contact ratings and operating characteristics are
determined. Derating may be required below this value.
6) Storage Temperature-Long time exposure at elevated temperature may degrade
solderability of the leads.
Switch Type MLRR-3
Contact Form A
Underwriters Laboratories Recognised, File E47258 (see note 1)
ELECTRICAL RATINGS
Contact Rating (2) Watt - max. 20
Voltage Switching Vdc - max. 200
Breakdown Vdc - min. 250
Current Switching A - max. 1.0
Carry A - max. 1.2
Resistance Contact, Initial Ω- max. 0.100
Insulation Ω- min. 1010
Capacitance Contact pF - typ. 0.4
Temperature Operating °C -40 to +125
Storage (6) °C -65 to +125
OPERATING CHARACTERISTICS
Operate Time (3) ms - max. 0.7
Release Time (3) ms - max. 0.2
Shock 11ms 1⁄2sine wave G - max. 100
Vibration 50-2000 Hertz G - max. 30
Resonant Frequency Hz - typ. 6250
MAGNETIC CHARACTERISTICS
Pull-In Range (4) Ampere Turns 17-38
Rating Sensitivity (5) Ampere Turns 20
Test Coil L4989
Features
•Miniature normally open switch
with 15.24mm x 2.66mm (0.600”
x 0.105”) glass envelope
•Capable of switching 200Vdc at
up to 20 Watts.
•Maximum switched current of
1.0 Amps
•1010 Ohms insulation resistance
•Available sensitivity range 17-38 AT
Benefits
•Hermetically sealed switch
contacts are not effected by and
have no effect on their external
environment
•Low, stable contact resistance
•Low space requirement
•Zero operating power required
for contact closure
•Fit and forget durability
Applications
•Security
•Limit switching
•Telephone line switching
•Office equipment
•Automotive applications
•Light inductive loads
INFORMATION PROVIDED ON THIS DATA SHEET IS PROVIDED FOR INFORMATION PURPOSES ONLY AND SHOULD NOT BE RELIED UPON AS BEING ACCURATE FOR ANY
PARTICULAR PURPOSE. Product performance may be affected by the application to which the product is applied. Upon request, HAMLIN will assist purchasers by providing information
specific to any particular application. HAMLIN disclaims any and all liability whatsoever for any purchaser’s reliance upon the information contained on this data sheet without further
consultation with authorised representatives of HAMLIN.
Hamlin USA Tel: +1 920 648 3000 •Fax: +1 920 648 3001 •Email: sales.us@hamlin.com
Hamlin UK Tel: +44 (0)1379 649700 •Fax: +44 (0)1379 649702 •Email: sales.uk@hamlin.com
Hamlin Germany Tel: +49 (0) 6142 923920 • Fax: +49 (0) 6142 923921 • Email: sales.de@hamlin.com
Hamectrol France Tel: +33 (0) 1 6047 3000 • Fax: +33 (0) 1 6015 9136 • Email: sales.fr@hamlin.com
www.hamlin.com
ISSUE No: 4 DATE: 1/5/3
