ABRACON IS
ISO 9001 / QS 9000
CERTIFIED
30332
Esperanza, Rancho Santa Margarita, California
92688
tel 949-546-8000 | fax 949-546-8001 | www.abracon.com
THRU-HOLE AXIAL POWER INDUCTORS
THRU-HOLE AXIAL POWER INDUCTORS
THRU-HOLE AXIAL POWER INDUCTORS
AIAP-04, AIAP-05 SERIES
|||||||||||||||
PHYSICAL CHARACTERISTICS:
STANDARD SPECIFICATIONS:
PHYSICAL CHARACTERISTICS:
Part L R
DC
I
DC
Part L R
DC
I
DC Part L RDC
Number (µH) Max Max Number (µH) Max Max
Number (µH) Max
AIAP-05- ±10% (A) AIAP-05- ±10% (A)
AIAP-05- ±10% Ω
3R9 3.9 0.019 3.60 680 68 0.145 0.88 122 1200 2.65
4R7 4.7 0.027 3.30 820 82 0.152 0.80 152 1500 3.45
5R6 5.6 0.024 3.00 101 100 0.208 0.73 182 1800 4.03
6R8 6.8 0.026 2.70 121 120 0.283 0.66 222 2200 4.48
8R2 8.2 0.028 2.50 151 150 0.340 0.60 272 2700 5.90
100 10 0.033 2.30 181 180 0.362 0.54 332 3300 6.56
120 12 0.037 2.10 221 220 0.430 0.49 392 3900 8.63
150 15 0.040 1.90 271 270 0.557 0.45 472 4700 10.5
180 18 0.044 1.70 331 330 0.665 0.40 562 5600 13.9
220 22 0.050 1.50 391 390 0.772 0.37 682 6800 16.3
270 27 0.058 1.40 471 470 1.150 0.34 822 8200 20.8
330 33 0.075 1.30 561 560 1.270 0.31 103 10000 26.4
390 39 0.094 1.20 681 680 1.61 0.280 123 12000 29.9
470 47 0.109 1.10 821 820 1.96 0.260 153 15000 42.5
560 56 0.140 0.97 102 1000 2.30 0.230 183 18000 48.3
• Lp measured @ 1KHz, 0.1VRMS
• Add K for 10% tolerance
• Coils finished with 135°C polyolefin sleeving
• Marking: Inductance value and tolerance
• Operating Temperature: -55°C to +130°C
• 5% inductance drop typical from initial value @ IDC
• Add -AMMO for AMMO-PACK
• UL Polyolefin Tubing, 2,500 VRMS isolation
• Operating Temp: -55°C to 125°C
• Lp measure at 10 KHz 0.1VRMS.
• Tolerance: J=±5%, K=±10%, L=±15%, M=20%
• Add tolerance after the part no.
• Check SCD for detail E&M specification
• Marking: Inductance value and tolerance
Note: All specifications subject to change
without notice
Dimension: inch/mm
Dimension: inch/mm
( )
Ω
( )
Ω
( )
OPTIONS:
• Bulk Pack is standard
• Ammo Pack available
APPLICATIONS:
• Electronic Appliance
• Automotive system
FEATURES:
• Ferrite core with UL tube
• Wire wound construction
Part No. L IDC RDC
AIAP-04 (µH) (A Max) (Ω Max)
500-2.5 50 2.5 0.120
101-2.1 100 2.1 0.160
251-1.8 250 1.8 0.280
501-1.6 500 16 0.420
102-1.4 1000 1.4 0.600
270-3.7 27 3.7 0.060
500-3.1 50 3.1 0.085
101-2.7 100 2.7 0.120
251-2.4 250 2.4 0.200
501-2.3 500 2.3 0.320
50-6.8 5 6.8 0.015
100-6.1 10 6.1 0.021
270-4.8 27 4.8 0.040
500-4.3 50 4.3 0.050
880-2.5 88 2.5 0.035
101-4.2 100 4.2 0.070
50-9.3 5 9.3 0.010
100-8.3 10 8.3 0.015
270-6.5 27 6.5 0.030
500-6.1 50 6.1 0.040
101-5.9 100 5.9 0.060
0.700/17,78 1.050/26,67 0.040/1,02
0.700/17,78 1.300/33,02 0.040/1,02
0.475/12,07
0.475/12,07
0.550/13,97
0.500/12,70
0.500/12,70
0.550/13,97
0.475/12,07 1.050/26,67 0.040/1,02
0.700/17,78 1.050/26,67 0.040/1,02
0.500/12,70
0.475/12,07
0.550/13,97
0.550/13,97
0.750/19,05
0.600/15,24
1.175/29,85 0.032/0,81
0.475/12,07 1.050/26,67 0.040/1,02
0.550/13,97
0.800/20,32
1.050/26,67
0.800/20,32
0.920/23,37
0.920/23,37
0.800/20,32
1.175/29,85
1.050/26,67
0.920/23,37
0.920/23,37 0.032/0,81
0.032/0,81
0.032/0,81
0.032/0,81
0.032/0,81
0.032/0,81
0.032/0,81
0.032/0,81
0.032/0,81
0.032/0,81
0.032/0,81
0.920/23,37 0.032/0,81
0.550/13,97 0.800/20,32 0.032/0,81
0.032/0,81
1.050/26,67
0.475/12,07 0.800/20,32
0.475/12,07
Max
AC
Typical
0.032/0,81
B
Max
0.800/20,32
