2701916 - PHOENIX CONTACT - Datasheet.Live

https://www.phoenixcontact.com/us/products/2701916

04/20/2021Page1/11

I/O module-AXL F DI8/1 DO8/1 1H-2701916

Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's

documentation. Our General Terms of Use for Downloads are valid

(http://phoenixcontact.com/download)

AxiolineF, Digital I/O module, Digital inputs: 8, 24 VDC, connection method: 1-conductor, Digital outputs:8,

24 VDC, 500 mA, connection method:1-conductor, transmission speed in the local bus:100 Mbps, degree of

protection:IP20, including bus base module and AxiolineF connectors

Product Description

The module is designed for use within an AxiolineF station.

It is used to acquire and output digital signals.

You can adjust the filter times of the inputs to increase noise immunity.

Filter times of 100μs enable you to implement a counter function with a maximum input frequency of 5kHz in the application.

The outputs are protected against short circuit and overload.

Your advantages

8 digital inputs according to EN61131-2 type1 and type3

24VDC, 2.4mA

Connection of sensors in 1-conductor technology

Filter times can be adjusted in three increments: <100µs, 1000µs or 3000µs

Maximum input frequency: 5 kHz

8 digital outputs

24VDC, 500mA

Connection of actuators in 1-conductor technology

Minimum update time of < 100 μs

Device rating plate stored

Key Commercial Data

Packing unit 1 pc

GTIN

GTIN 4046356872935

Weight per Piece (excluding packing) 180.000 g

Custom tariff number 85389091

https://www.phoenixcontact.com/us/products/2701916

04/20/2021Page2/11

I/O module-AXL F DI8/1 DO8/1 1H-2701916

Country of origin Germany

Technical data

Note

Utilization restriction EMC: class A product, see manufacturer's declaration in the download

area

Dimensions

Caption Dimensions

Width 35 mm

Height 126.1 mm

Depth 54 mm

Note on dimensions The depth is valid when a TH35-7,5 DIN rail is used (according to

EN60715).

Ambient conditions

Ambient temperature (operation) -25 °C ... 60 °C

Ambient temperature (storage/transport) -40 °C ... 85 °C

Permissible humidity (operation) 5 % ... 95 % (non-condensing)

Permissible humidity (storage/transport) 5 % ... 95 % (non-condensing)

Air pressure (operation) 70 kPa ... 106 kPa (up to 3000m above sea level)

Air pressure (storage/transport) 70 kPa ... 106 kPa (up to 3000m above sea level)

Degree of protection IP20

Connection data

Designation AxiolineF connector

Connection method Push-in connection

Note on the connection method Please observe the information provided on conductor cross sections in

the “AxiolineF: system and installation” user manual.

Conductor cross section solid min. 0.2 mm²

Conductor cross section solid max. 1.5 mm²

Conductor cross section flexible min. 0.2 mm²

Conductor cross section flexible max. 1.5 mm²

Conductor cross section AWG min. 24

Conductor cross section AWG max. 16

Stripping length 8 mm

General

Mounting type DIN rail

Color traffic grey A RAL 7042

Net weight 133 g

Note on weight specifications with connectors and bus base module

Degree of pollution 2 (IEC60664-1, EN60664-1)

https://www.phoenixcontact.com/us/products/2701916

04/20/2021Page3/11

I/O module-AXL F DI8/1 DO8/1 1H-2701916

Technical data

General

Mounting position any (no temperature derating)

Interfaces

Designation AxiolineFlocal bus

Number of interfaces 2

Connection method Bus base module

Transmission speed 100 Mbps

Axioline potentials

Designation AxiolineF local bus supply (UBus)

Supply voltage 5 VDC (via bus base module)

Current consumption max. 120 mA (up to HW01)

max. 60 mA (as of HW02)

Power consumption max. 600 mW (up to HW01)

max. 300 mW (as of HW02)

Designation Supply for digital input and output modules (UIO)

Supply voltage 24 VDC

Supply voltage range 19.2 VDC ... 30 VDC (including all tolerances, including ripple)

Current consumption max. 4 A (provide external protection)

Power consumption max. 96 W (of which 1.35W internal losses)

Protective circuit Surge protection electronic (35 V, 0.5 s)

Reverse polarity protection parallel diode; with external 5A fuse (only for

commissioning)

Protection max. 8 A (polarity reversal protection up to 5A)

Digital inputs

Input name Digital inputs

Description of the input EN 61131-2 types 1 and 3

Connection method Push-in connection

Connection technology 1-conductor

Number of inputs 8

Protective circuit Polarity reversal protection of the inputs parallel diode (30V, 5s)

Nominal input voltage UIN 24 VDC

Nominal input current at UIN 2.4 mA

Input filter time 3000 µs (Default)

1000 µs

< 100 µs

Input voltage range "0" signal -3 VDC ... 5 VDC

Input voltage range "1" signal 11 VDC ... 30 VDC

https://www.phoenixcontact.com/us/products/2701916

04/20/2021Page4/11

I/O module-AXL F DI8/1 DO8/1 1H-2701916

Technical data

Digital outputs

Output name Digital outputs

Connection method Push-in connection

Connection technology 1-conductor

Number of outputs 8

Protective circuit Short-circuit protection, overload protection of the outputs electronic

Output voltage 24 VDC

Nominal output voltage 24 VDC

Nominal load, inductive max. 12 VA (1.2 H, 48 Ω, with nominal voltage)

Nominal load, lamp max. 12 W (at nominal voltage)

Nominal load, ohmic max. 12 W (48 Ω, with nominal voltage)

Switching frequency max. 10000 per second (with at least 50mA load current)

Load min. 10 kΩ

Output voltage when switched off max. 1 V

Output current when switched off max. 300 µA

Behavior with overload Shutdown with automatic restart

Behavior with inductive overload Output can be destroyed

Reverse voltage resistance to short pulses limited protection up to 0.5 A for 1 s

Electrical isolation

Test section 5V supply of the local bus (UBus) / 24V supply (I/Os) 500 VAC 50 Hz 1

min.

5V supply of the local bus (UBus) / functional ground 500 VAC 50 Hz 1

min.

24V supply (I/O) / functional ground 500 VAC 50 Hz 1 min.

Standards and Regulations

Immunity to ESD

Noise immunity test in accordance with EN 61000-6-2 Electrostatic

discharge (ESD) EN61000-4-2/IEC61000-4-2 Criterion B, 6 kV contact

discharge, 8 kV air discharge

Immunity to EF Noise immunity test in accordance with EN 61000-6-2 Electromagnetic

fields EN61000-4-3/IEC61000-4-3 Criterion A, Field intensity: 10 V/m

Immunity to burst Noise immunity test in accordance with EN 61000-6-2 Fast transients

(burst) EN61000-4-4/IEC61000-4-4 Criterion B, 2kV

Immunity to surge

Noise immunity test in accordance with EN 61000-6-2 Transient

overvoltage (surge) EN61000-4-5/IEC61000-4-5 Criterion B, DC supply

lines: ±0.5 kV/±0.5 kV (symmetrical/asymmetrical)

Immunity to conducted interference Noise immunity test in accordance with EN 61000-6-2 Conducted

interference EN61000-4-6/IEC61000-4-6 Criterion A, Test voltage 10 V

Interference emission Noise emission test according to EN 61000-6-3 Class B

Mechanical tests Vibration resistance in acc. with EN60068-2-6/IEC60068-2-6 5g

Shock in acc. with EN60068-2-27/IEC60068-2-27 30g

https://www.phoenixcontact.com/us/products/2701916

04/20/2021Page5/11

I/O module-AXL F DI8/1 DO8/1 1H-2701916

Technical data

Standards and Regulations

Continuous shock according to EN60068-2-27/IEC60068-2-27 10g

Protection class III (IEC61140, EN61140, VDE0140-1)

Overvoltage category II (IEC60664-1, EN60664-1)

Environmental Product Compliance

REACh SVHC Lead 7439-92-1

China RoHS Environmentally Friendly Use Period = 50 years

For details about hazardous substances go to tab “Downloads”, Category

“Manufacturer's declaration”

Drawings

Connection diagram

+24 V

IN7

+24 V

IN1

+24 V

OUT8

OUT2

Typical connection of sensors and actuators when using external busbars

Connection diagram

+24 V

IN7

+24 V

IN1

+24 V

OUT8

OUT2

Connection in 1-conductor technology

Dimensional drawing

35 54

122,4

126,1

Dimensions

Diagram

0,1 0,2 0,5 0,6 0,7 0,8 0,9 1,0 1,1 1,2 1,3 1,4 1,5 1,6 1,7 1,8 1,9 2,0 2,1 2,2 2,3 2,40,3 0,4

0,05

0,1

0,15

0,2

0,25

0,3

0,35

0,4

1=0,5A

2=0,4A

3=0,3A

4=0,2A

5=0,1A

Inductance[H]

Energy consumption [J]

Onlywithexternalfreerunningcircuit

Maximum outputs power consumption when inductive loads are switched off

https://www.phoenixcontact.com/us/products/2701916

04/20/2021Page6/11

I/O module-AXL F DI8/1 DO8/1 1H-2701916

Block diagram

UIO

0130

Output circuit

UIO

24 V

32 03 02

03 023233

31 00

30 0131

OUT

01 ... 08

Input circuit

Local bus

UBus

01 ... 08

µC

Internal wiring of the terminal points

Classifications

eCl@ss

eCl@ss 10.0.1 27242604

eCl@ss 11.0 27242604

eCl@ss 4.0 27240400

eCl@ss 4.1 27240400

eCl@ss 5.0 27242200

eCl@ss 5.1 27242600

eCl@ss 6.0 27242600

eCl@ss 7.0 27242604

eCl@ss 9.0 27242604

ETIM

ETIM 4.0 EC001599

ETIM 6.0 EC001599

https://www.phoenixcontact.com/us/products/2701916

04/20/2021Page7/11

I/O module-AXL F DI8/1 DO8/1 1H-2701916

Classifications

ETIM

ETIM 7.0 EC001599

UNSPSC

UNSPSC 6.01 43172015

UNSPSC 7.0901 43201404

UNSPSC 11 39121311

UNSPSC 12.01 39121311

UNSPSC 13.2 32151602

UNSPSC 18.0 32151602

UNSPSC 19.0 32151602

UNSPSC 20.0 32151602

UNSPSC 21.0 32151602

Approvals

PRS / BV / LR / KR / ABS / BSH / RINA / EAC / DNV GL / cULus Listed

Ex Approvals

Approval details

PRS http://www.prs.pl/ TE/1117/880590/20

BV http://www.veristar.com/portal/veristarinfo/generalinfo/

approved/approvedProducts/equipmentAndMaterials 36433/B2 BV

LR http://www.lr.org/en LR2001902TA

https://www.phoenixcontact.com/us/products/2701916

04/20/2021Page8/11

I/O module-AXL F DI8/1 DO8/1 1H-2701916

Approvals

KR http://www.krs.co.kr/eng/main/main.aspx HMB17372-AC002

ABS http://www.eagle.org/eagleExternalPortalWEB/ 20-2059154-PDA

BSH  840

RINA http://www.rina.org/en ELE030120XG

EAC  EAC-Zulassung

DNV GL https://approvalfinder.dnvgl.com/ TAA00000DF

cULus Listed http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 238705

Accessories

Device marking

Insert label-EMT (35X28)R-0801602

Insert label, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2,

THERMOMARK ROLL X1, THERMOMARK ROLL 2.0, THERMOMARK ROLL, mounting type: snapped into marker

carrier, lettering field size: 35 x 28 mm, Number of individual labels: 500



DIN rail connector

https://www.phoenixcontact.com/us/products/2701916

04/20/2021Page9/11

I/O module-AXL F DI8/1 DO8/1 1H-2701916

Accessories

Bus connector-AXL F BS H-2700992

AxiolineF bus base module for housing type H



System cable

Round cable-VIP-CAB-FLK14/AXIO/0,14/0,5M-2901604

Round cable set; controller: Axioline Realtime I/O; connection 1: Single wires (8-position) (The wires are marked and

fitted with ferrules); connection 2: IDC/FLK socket strip (1x 14-position, 90 °-out put); cable length: 0.5 m



Round cable-VIP-CAB-FLK14/AXIO/0,14/1,0M-2901605

Round cable set; controller: Axioline Realtime I/O; connection 1: Single wires (8-position) (The wires are marked and

fitted with ferrules); connection 2: IDC/FLK socket strip (1x 14-position, 90 °-out put); cable length: 1 m



Round cable-VIP-CAB-FLK14/AXIO/0,14/1,5M-2901606

Round cable set; controller: Axioline Realtime I/O; connection 1: Single wires (8-position) (The wires are marked and

fitted with ferrules); connection 2: IDC/FLK socket strip (1x 14-position, 90 °-out put); cable length: 1.5 m



Round cable-VIP-CAB-FLK14/AXIO/0,14/2,0M-2901607

Round cable set; controller: Axioline Realtime I/O; connection 1: Single wires (8-position) (The wires are marked and

fitted with ferrules); connection 2: IDC/FLK socket strip (1x 14-position, 90 °-out put); cable length: 2 m



https://www.phoenixcontact.com/us/products/2701916

04/20/2021Page10/11

I/O module-AXL F DI8/1 DO8/1 1H-2701916

Accessories

Round cable-VIP-CAB-FLK14/AXIO/0,14/2,5M-2901608

Round cable set; controller: Axioline Realtime I/O; connection 1: Single wires (8-position) (The wires are marked and

fitted with ferrules); connection 2: IDC/FLK socket strip (1x 14-position, 90 °-out put); cable length: 2.5 m



Round cable-VIP-CAB-FLK14/AXIO/0,14/3,0M-2901609

Round cable set; controller: Axioline Realtime I/O; connection 1: Single wires (8-position) (The wires are marked and

fitted with ferrules); connection 2: IDC/FLK socket strip (1x 14-position, 90 °-out put); cable length: 3 m



Round cable-VIP-CAB-FLK14/AXIO/0,14/4,0M-2901610

Round cable set; controller: Axioline Realtime I/O; connection 1: Single wires (8-position) (The wires are marked and

fitted with ferrules); connection 2: IDC/FLK socket strip (1x 14-position, 90 °-out put); cable length: 4 m



Round cable-VIP-CAB-FLK14/AXIO/0,14/6,0M-2901611

Round cable set; controller: Axioline Realtime I/O; connection 1: Single wires (8-position) (The wires are marked and

fitted with ferrules); connection 2: IDC/FLK socket strip (1x 14-position, 90 °-out put); cable length: 6 m



Terminal marking

Zack marker strip-ZB 20,3 AXL UNPRINTED-0829579

Zack marker strip for AxiolineF (device labeling), in 2 x 20.3 mm pitch, unprinted, 25-section, for individual labeling with

B-STIFT 0.8, X-PEN, or CMS-P1-PLOTTER



https://www.phoenixcontact.com/us/products/2701916

04/20/2021Page11/11

I/O module-AXL F DI8/1 DO8/1 1H-2701916

Accessories

Zack Marker strip, flat-ZBF 10/5,8 AXL UNPRINTED-0829580

Zack Marker strip, flat, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type:

snap into flat marker groove, for terminal block width: 10.15 mm, lettering field size: 4 of 10.15 x 5 mm and 1 of 5.8 x 5

mm, Number of individual labels: 50



http://www.phoenixcontact.com