VFTX100 TCXO Low Noise to 1.0 GHz 25.4x22mm SMD, PECL/LVPECL RoHS Status Features 3/4 3/4 3/4 3/4 200MHz to 1.0 GHz Frequency Range Ultra Low Jitter and Phase Noise: -118 dBc/Hz @ 1KHz Excellent frequency stability < 1ppm Low Power: <220mW typical Applications 3/4 3/4 3/4 Sonet / SDH / ATM 10 Gigabit Ethernet Digital Wireless Reference Description The VFTX100 is a low noise TCXO capable of providing an output frequency up to 1 GHz. The temperature stability is less than 1ppm over a temperature range of -40 C to + 85 C. Operating with a +3.3 volt power supply the device typically consumes 220 mW. The device contains an internal voltage regulator for improved stability and noise performance. The output is configured as a differential LVPECL signal and requires external termination resistors. The VFTX100 is available in a 25.4mm x 22 mm surface mount package. Replaces Valpey Fisher Part Number: VFT7H Electrical Specifications Parameter Frequency Range Frequency Stability Operating Temperature Range Output Supply Voltage Voltage Control Input Impedance APR Deviation slope Linearity Modulation BW Symbol Condition Min F F/F Typ 200 Vs. Operating Temperature B: 0C to +70C G: -40C to +85C 0.5 0.8 Vs. Supply Voltage Vs. Aging / Year Vs. Aging / 10 Years 0.1 1 3 0 -40 T 4.75 3.15 0 0 Vc Unit 1,000 MHz 1.0 1.0 ppm ppm/V ppm ppm +70 +85 Signal Vcc Max 5.00 3.30 C PECL / LVPECL 5.25 V 3.45 5 V 3.3 50K 5 ppm Note First Year 10 Years Order Code B Order Code G Order Code D Order Code E Monotonic positive -10 10 +10 ppm/V Hz 3dB BW 75 South Street, Hopkinton, MA 01748 * 800-982-5737 * 508-435-6831 * FAX 508-435-5289 * www.valpeyfisher.com * RevB1206 1 VFTX100 TCXO Low Noise to 1.0 GHz 25.4x22mm SMD, PECL/LVPECL Electrical Specifications Parameter Symbol Condition Input Current Icc 50 Ohm Load Load Min Typ Max Unit 62 75 mA 50 Ohm to Vcc-2V or Thevenin Equivalent Duty Cycle @ 50% 45 50 20% to 80% 55 % 0.6 ns Rise / Fall Time Tr/Tf Logic "1" Level Voh Vcc-0.96 Vcc-0.81 V Logic "0" Level Vol Vcc-1.85 Vcc-1.65 V 2 10 ms 0.5 ps Start up time Phase Jitter 12KHz to 20MHz 0.25 SSB Phase Noise 100Hz 1KHz 10KHz 100KHz -90 -118 -142 -145 dBc/Hz Setability Setability Voltage Enable / Disable Function Enable / Disable Time Note 1.3 0.1 ppm 1.7 V Input HIGH (>2.5V): DISABLED Input LOW (<0.5V) or floating: ACTIVE Te/Td @ 622.08 MHz LVCMOS 100 ns How to Order FREQUENCY, MHz VFTX100 Supply Voltage Temperature Range Code B G Code D E Specification 0C to 70C -40C to 85C Specification 5V 5% 3.3V 5% 75 South Street, Hopkinton, MA 01748 * 800-982-5737 * 508-435-6831 * FAX 508-435-5289 * www.valpeyfisher.com * RevB1206 2 VFTX100 TCXO Low Noise to 1.0 GHz 25.4x22mm SMD, PECL/LVPECL Absolute Maximum Ratings Parameter Supply Break Down Voltage Storage Temperature Control Voltage Symbol Condition Min Typ Max Unit Vcc -0.5 5.5 V Ts -55 +105 C Vc -0.5 6 V Note Environmental and Mechanical Parameter Mechanical Shock Thermal Shock Specification Per MIL-STD-202, Method 213, Condition E Per MIL-STD-883, Method 1011, Condition A Vibration Per MIL-STD-883, Method 2007, Condition A Soldering Conditions 260C for 10s max Leak rate less than 5x10-8 atm.cc/s of helium (crystal only) Hermetic Seal Connection Diagram Vcc = 3.3V C1 .01 uF Mechanical Outline Disable 3 4 R1 180 Fout 5 nc R3 10K 2 1 6 7 Vc Gnd Pin # 1 2 3 4 5 6 7 nFout R2 180 Connection Vc N/C Vcc N/C Output Output GND 75 South Street, Hopkinton, MA 01748 * 800-982-5737 * 508-435-6831 * FAX 508-435-5289 * www.valpeyfisher.com * RevB1206 3