JetI/O 6510 Intelligent 8-CH Analog Input Ethernet I/O Server Ethernet I/O server with 8 Channel Analog Input from 150mV to 10V, 20mA 16 bits resolution and high accuracy High/Low Voltage/Current active alarm Support OPC Server Driver Windows Utility, OPC Server Utility, Modbus/TCP protocol, SNMP and web display Built-in watchdog timer and real-time clock Din-Rail Mount, Robust Aluminum case with IP31 protection RoHS Overview JetI/O 6510 is an intelligent I/O server equipped with JetI/O 6510 provides Windows Utilities, SNMP and one Ethernet port and 8 Analog Input channels. Web configuration. Industrial Modbus/TCP protocol JetI/O 6510 provides 16 bits resolution and high and OPC Server driver for integrating JetI/O with accuracy for I/O data collecting. The analog input existing HMI/SCADA. Robust aluminum case with range can support from 150mV to 10V and 20mA. good heat dispersing and IP31 protection. The values are most adopted in the industrial With JetI/O, users can easily perform status environemnt. monitoring and control of remote I/O devices. JetI/O 6510 Appearance System LED PWR: Power RDY: Ready Model Name & Major Feature JetI/O 6510 8-CH Analog Input 10/100Base-TX Fast Ethernet Pin Assignment ch0 - ch7 16 Pins, Pitch 5.0mm Din Rail Mounting Din 35 (35mm) Power Input 24V 0V E.G. 217 www.korenix.com Industrial Intelligent I/O Server Dimensions (Unit -mm) Industrial PoE Switch IP67/68 Ethernet Switch Rackmount Managed Switch Gigabit Switch Redundant Switch Entry-Level Switch Specification Networking Computer System Feature CPU: 100MHz, RISC-Based SDRAM: 32K bytes Flash ROM: 512K bytes EEPROM: 256 bytes Watchdog Timer: 1.0 sec H/W LED: PWR: Power Input plugged and On (Green) RDY: System startup ready (Red) Network Protocols: IP, TCP, UDP, SNMP, HTTP, BOOTP, DHCP, Modbus/TCP, OPC Server Configuration: Windows Utility, SNMP, Web, DHCP Client, BootP for firmware update Windows Utility: Block I/O Utility OPC Server Utility: OPC Server for Modbus/TCP SNMP: MIB-II: System, SNMP Trap and Private MIB SNMP Trap Server: Up to 4 SNMP Trap Server I/O Rules: High-/Low- Voltage/Current alarms Network Interface Ethernet: IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX Connector: 1 * RJ45, Auto MDI/MDI-X Protection: Built-in 1.5 KV magnetic isolation protection LED: Upper (LAN Activity): Orange On & Blinking Lower(10M/100M): 10M (Green Off) /100M(Green ON) Analog Input Channels: 8 Differential Resolution: 16 bits Input Range: Voltage: 10V, 5V, 1V, 500mV, 150mV Current: 20mA with external 125 resistor Accuracy: 0.05% of FSR 1LSB Sampling Rate: 10 samples/sec (total) Input Impedance: 10 M Calibration: On Board EEPROM Isolation Voltage: 2500Vrms Power Requirement Communication Computer Ethernet I/O Server Serial Device Server Media Converter System Power: external unregulated +24V (18-32V) Multiport Power Consumption: Max. 3.2 W Serial Card Mechanical Dimensions: 120 (H) x 55 (W) x 75 (D) mm Mounting: Din-Rail Material: Aluminum SFP Module Environmental Power Supply Din Rail Regulatory Approvals: CE, FCC Class A Operating Temperature: -25 ~ 70C Operating Humidity: 0 ~ 95% non-condensing Storage Temperature: -40 ~ 80C Warranty: 3 years Ordering Infomation JetI/O 6510 Intelligent 8-CH Analog Input Etherent I/O Server www.korenix.com 218