RoHS Compliant, ELV Compliant
POLYZEN DEVICES
Polymer Protected Zener Diode
PolyZen devices are polymer-enhanced, precision Zener
diodes. They offer resettable protection against multi-Watt
fault events without the need for multi-Watt heat sinks.
The Zener diode used for voltage clamping a PolyZen
device was selected due to its relatively flat voltage
vs. current response. This helps improve output voltage
clamping, even when input voltage is high and diode
currents are large.
An advanced feature of the PolyZen device is that the
Zener diode is thermally coupled to a resistively non-
linear, PPTC (polymer positive temperature coefficient)
layer. This PPTC layer is fully integrated into the device
and is electrically in series between VIN and the diode
clamped VOUT.
This advanced PPTC layer responds to either extended
diode heating or overcurrent events by transitioning from a low to high resistance state, also known as “tripping.” A
tripped PPTC will limit current and generate voltage drop. It helps to protect both the Zener diode and the follow-on
electronics and effectively increases the diode’s power handling capability.
The polymer-enhanced Zener diode helps protect sensitive portable electronics from damage caused by inductive
voltage spikes, voltage transients, incorrect power supplies and reverse bias. These devices are particularly suitable for
portable electronics and other low-power DC devices.
FEATURES
Overvoltage transient suppression
Stable VZ vs. fault current
Time delayed, overvoltage trip
Time delayed, reverse bias trip
Multi-Watt power handling capability
Integrated device construction
RoHS compliant
Halogen free
(refers to: Br900ppm, Cl900ppm, Br+Cl1500ppm)
BENEFITS
Stable Zener diode helps shield downstream
electronics from overvoltage and reverse bias
Trip events shut out overvoltage and reverse bias
sources
Analog nature of trip events helps minimize damage
from upstream inductive spikes
Minimal power dissipation requirements
Single component placement
APPLICATIONS
DC power port protection in portable electronics
DC power port protection for systems using barrel
jacks for power input
Internal overvoltage and transient suppression
DC output voltage regulation
Tablet PCs and portable electronics
Specifications subject to change without notice. ©2016 Littelfuse, Inc. 27
+
Power Supply
(External or Internal)
GND
1
2
3
Regulated
Output Protected Downstream
Electronics
VOUT
VIN
RLOAD
Protected Electronics
PolyZen
Device
Polymer PTC
GND
Zener
Diode
VIN VOUT
GND
VIN VOUT
IPTC IOUT
IFLT
Table PZ2 — Definition of Terms
VZ Zener clamping voltage measured at current IZT and 20°C.
IZT Test current at which VZ is measured.
IHOLD Maximum steady state current IPTC that will not generate a trip event at the specified temperature.
Ratings assume IFLT = 0A.
RTyp Typical resistance between VIN and VOUT pins when the device is at room temperature.
R1MAX The maximum resistance between VIN and VOUT pins, at room temperature, one hour after first trip or
after reflow soldering.
IFLT Current flowing through the Zener diode.
IFLT MAX Maximum RMS fault current the Zener diode component of the device can withstand and remain resettable;
testing is conducted at rated voltage with no load connected to VOUT
.
VINT MAX The voltage (VIN - VOUT “post trip”) at which typical qualification devices (98% devices, 95% confidence) survived
at least 100 trip cycles and 24 hours trip endurance when “tripped” at the specified voltage and current (IPTC).
IPTC Current flowing through the PPTC portion of the circuit.
IOUT Current flowing out the VOUT pin of the device.
Trip Event A condition where the PPTC transitions to a high resistance state, thereby limiting IPTC, and significantly
increasing the voltage drop between VIN and VOUT
.
Figure PZ1 — Typical Application Block Diagram
Table PZ1 — Electrical Characteristics
(Performance ratings @ 25°C unless otherwise specified)
VZ(V) VINT MAX IFLT MAX
IHOLD Test Test
IZt @ 20°C RTy p R1MAX VINT MAX Current IFLT MAX Voltage
Part Number Min Ty p Max (A) (A) (Ω) (Ω)(V) (A) (A) (V)
ZEN056V130A24LS 5.45 5.60 5.75 0.10 1.30 0.12 0.16 24 3 +10/-40 +24/-16
ZEN059V130A24LS 5.80 5.90 6.00 0.10 1.30 0.12 0.15 24 3 +6/-40 +24/-16
ZEN065V130A24LS 6.35 6.50 6.65 0.10 1.30 0.12 0.16 24 3 +6/-40 +24/-16
ZEN098V130A24LS 9.60 9.80 10.00 0.10 1.30 0.12 0.16 24 3 +3.5/-40 +24/-16
ZEN132V130A24LS 13.20 13.40 13.60 0.10 1.30 0.12 0.16 24 3 +2/-40 +24/-16
ZEN164V130A24LS 16.10 16.40 16.60 0.10 1.30 0.12 0.16 24 3+1.25/-40 +24/-16
ZEN056V230A16LS 5.45 5.60 5.75 0.10 2.30 0.04 0.06 16 5 +5/-40 +16/-12
ZEN065V230A16LS 6.35 6.50 6.65 0.10 2.30 0.04 0.06 16 5 +3.5/-40 +16/-12
ZEN098V230A16LS 9.60 9.80 10.00 0.10 2.30 0.04 0.06 16 5 +3.5/-40 +16/-12
ZEN132V230A16LS 13.20 13.40 13.60 0.10 2.30 0.04 0.06 16 5 +2/-40 +20/-12
ZEN056V075A48LS 5.45 5.60 5.75 0.10 0.75 0.28 0.45 48 3 +10/-40 +48/-16
ZEN132V075A48LS 13.20 13.40 13.60 0.10 0.75 0.28 0.45 48 3 +2/-40 +48/-16
ZEN056V115A24LS 5.45 5.60 5.75 0.10 1. 1 5 0.15 0.18 24 3 +10/-40 +24/-16
ZEN056V130A16YM 5.35 5.60 5.85 0.10 1.30 0.110 0.160 14 3 +3/-40 +16/-12
ZEN056V175A12YM 5.35 5.60 5.85 0.10 1.75 0.050 0.095 12 4 +3/-40 +12/-12
ZEN132V130A16YM 13.20 13.40 13.80 0.10 1.30 0.110 0.160 14 3 +1/-40 +20/-12
ZEN132V175A12YM 13.20 13.40 13.80 0.10 1.75 0.050 0.095 12 4 +1/-40 +20/-12
ZEN056V130A24YC 5.35 5.60 5.85 0.10 1.30 0.110 0.170 24 3 +4/-40 +24/-16
ZEN056V230A16YC 5.35 5.60 5.85 0.10 2.30 0.040 0.070 16 5 +3/-40 +16/-12
ZEN056V260A16YC 5.35 5.60 5.85 0.10 2.60 0.040 0.055 16 5 +3/-40 +16/-12
ZEN132V130A24YC 13.20 13.40 13.80 0.10 1.30 0.110 0.170 24 3 +1/-40 +24/-16
ZEN132V230A16YC 13.20 13.40 13.80 0.10 2.30 0.040 0.070 16 5 +1/-40 +20/-12
ZEN132V260A16YC 13.20 13.40 13.80 0.10 2.60 0.040 0.055 16 5 +1/-40 +20/-12
LS module height is 1.7mm typical. YM module height is 1.2mm typical. YC module
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
RoHS Compliant, ELV Compliant
Specifications subject to change without notice. ©2016 Littelfuse, Inc.
28
PolyZen Devices
Polymer Protected Zener Diode
VOUT Peak vs. IFLT RMS (IOUT = 0)
VOUT Peak vs. IFLT RMS (IOUT = 0)
VOUT Peak (V)
IFLT RMS (A)
IFLT RMS (A)
01234567 8910
01234567 8910 01234567 8910
01234567 8910
22.0
20.0
18.0
16.0
14.0
12.0
10.0
8.0
6.0
4.0
2.0
0
VOUT Peak (V)
22.0
20.0
18.0
16.0
14.0
12.0
10.0
8.0
6.0
4.0
2.0
0
Time-to-Trip vs. IFLT RMS (IOUT = 0)
Time-to-Trip (s)
IFLT RMS (A)
10
1
0.1
0.01
Time-to-Trip vs. IFLT RMS (IOUT = 0)
Time-to-Trip (s)
IFLT RMS (A)
100
10
1
0.1
0.01
A = ZEN056V1yyA24LS
B = ZEN059V130A24LS
C = ZEN065V130A24LS
D = ZEN098V130A24LS
E = ZEN132V130A24LS
F = ZEN164V130A24LS
A = ZEN056V230A16LS
B = ZEN065V230A16LS
C = ZEN098V230A16LS
D = ZEN132V230A16LS
A = ZEN056V230A16LS
B = ZEN065V230A16LS
C = ZEN098V230A16LS
D = ZEN132V230A16LS
A = ZEN056V1yyA24LS
B = ZEN059V130A24LS
C = ZEN065V130A24LS
D = ZEN098V130A24LS
E = ZEN132V130A24LS
F = ZEN164V130A24LS
A
A
B
B
C
C
D
A
A
B
B
C
C
D
D
D
E
E
F
F
VOUT Peak vs. IFLT RMS (IOUT = 0)
VOUT Peak vs. IFLT RMS (IOUT = 0)
VOUT Peak (V)
IFLT RMS (A)
IFLT RMS (A)
01234567 8910
01234567 8910 01234567 8910
01234567 8910
22.0
20.0
18.0
16.0
14.0
12.0
10.0
8.0
6.0
4.0
2.0
0
VOUT Peak (V)
22.0
20.0
18.0
16.0
14.0
12.0
10.0
8.0
6.0
4.0
2.0
0
Time-to-Trip vs. IFLT RMS (IOUT = 0)
Time-to-Trip (s)
IFLT RMS (A)
10
1
0.1
0.01
Time-to-Trip vs. IFLT RMS (IOUT = 0)
Time-to-Trip (s)
IFLT RMS (A)
100
10
1
0.1
0.01
A = ZEN056V1yyA24LS
B = ZEN059V130A24LS
C = ZEN065V130A24LS
D = ZEN098V130A24LS
E = ZEN132V130A24LS
F = ZEN164V130A24LS
A = ZEN056V230A16LS
B = ZEN065V230A16LS
C = ZEN098V230A16LS
D = ZEN132V230A16LS
A = ZEN056V230A16LS
B = ZEN065V230A16LS
C = ZEN098V230A16LS
D = ZEN132V230A16LS
A = ZEN056V1yyA24LS
B = ZEN059V130A24LS
C = ZEN065V130A24LS
D = ZEN098V130A24LS
E = ZEN132V130A24LS
F = ZEN164V130A24LS
A
A
B
B
C
C
D
A
A
B
B
C
C
D
D
D
E
E
F
F
Figures PZ2-PZ9 — Typical Performance Curves for PolyZen Devices - LS Series
Figure PZ2
Figure PZ4 Figure PZ5
Figure PZ6
Figure PZ8
Figure PZ3
Figure PZ7
Figure PZ9
VOUT Peak vs. IFLT RMS (IOUT = 0)
VOUT Peak (V)
IFLT RMS (A)
Time-to-Trip vs. IFLT RMS (IOUT = 0)
Time-to-Trip (s)Time-to-Trip (s)
IFLT RMS (A)
-50 -40 -30 -20 -10 0
100
10
1
0.1
0.01
0.001
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0.0
-40 -20 020406080 100
IHOLD (A)
Ambient Temperature (˚C)
Temperature Effect on IHOLD (IFLT = 0)
0510 15 20 3025 35 40 45
10
1
0.1
0.01
0.001
IPTC RMS (A)
Time-to-Trip vs. IPTC RMS (IFLT = 0)
A
BC
A
B
C
A
B
C
A
C
D
B
0.0
-0.2
-0.4
-0.6
-0.8
-1.0
-1.2
-50 -40 -30 -20 -10 0
A = ZENxxxV1yyA24LS
B = ZENxxxV230A16LS
C = ZENxxxV075A48LS
A = ZENxxxV1yyA24LS
B = ZENxxxV230A16LS
C = ZENxxxV075A48LS
A = ZENxxxV130A24LS
B = ZENxxxV230A16LS
C = ZENxxxV075A48LS
D = ZENxxxV115A24LS
A = ZENxxxV1yyA24LS
B = ZENxxxV230A16LS
C = ZENxxxV075A48LS
VOUT Peak vs. IFLT RMS (IOUT = 0)
VOUT Peak vs. IFLT RMS (IOUT = 0)
VOUT Peak (V)
IFLT RMS (A)
IFLT RMS (A)
01234567 8910
01234567 8910
01234567 8910
01234567 8910
22.0
20.0
18.0
16.0
14.0
12.0
10.0
8.0
6.0
4.0
2.0
0
VOUT Peak (V)
22.0
20.0
18.0
16.0
14.0
12.0
10.0
8.0
6.0
4.0
2.0
0
Time-to-Trip vs. IFLT RMS (IOUT = 0)
Time-to-Trip (s)
IFLT RMS (A)
10
1
0.1
0.01
Time-to-Trip vs. IFLT RMS (IOUT = 0)
Time-to-Trip (s)
IFLT RMS (A)
100
10
1
0.1
0.01
A = ZEN056V1yyA24LS
B = ZEN059V130A24LS
C = ZEN065V130A24LS
D = ZEN098V130A24LS
E = ZEN132V130A24LS
F = ZEN164V130A24LS
A = ZEN056V230A16LS
B = ZEN065V230A16LS
C = ZEN098V230A16LS
D = ZEN132V230A16LS
A = ZEN056V230A16LS
B = ZEN065V230A16LS
C = ZEN098V230A16LS
D = ZEN132V230A16LS
A = ZEN056V1yyA24LS
B = ZEN059V130A24LS
C = ZEN065V130A24LS
D = ZEN098V130A24LS
E = ZEN132V130A24LS
F = ZEN164V130A24LS
A
A
B
B
C
C
D
A
A
BB
C
C
D
D
D
E
E
F
F
VOUT Peak vs. IFLT RMS (IOUT = 0)
VOUT Peak vs. IFLT RMS (IOUT = 0)
VOUT Peak (V)
IFLT RMS (A)
IFLT RMS (A)
01234567 8910
01234567 8910
01234567 8910
01234567 8910
22.0
20.0
18.0
16.0
14.0
12.0
10.0
8.0
6.0
4.0
2.0
0
VOUT Peak (V)
22.0
20.0
18.0
16.0
14.0
12.0
10.0
8.0
6.0
4.0
2.0
0
Time-to-Trip vs. IFLT RMS (IOUT = 0)
Time-to-Trip (s)
IFLT RMS (A)
10
1
0.1
0.01
Time-to-Trip vs. IFLT RMS (IOUT = 0)
Time-to-Trip (s)
IFLT RMS (A)
100
10
1
0.1
0.01
A = ZEN056V1yyA24LS
B = ZEN059V130A24LS
C = ZEN065V130A24LS
D = ZEN098V130A24LS
E = ZEN132V130A24LS
F = ZEN164V130A24LS
A = ZEN056V230A16LS
B = ZEN065V230A16LS
C = ZEN098V230A16LS
D = ZEN132V230A16LS
A = ZEN056V230A16LS
B = ZEN065V230A16LS
C = ZEN098V230A16LS
D = ZEN132V230A16LS
A = ZEN056V1yyA24LS
B = ZEN059V130A24LS
C = ZEN065V130A24LS
D = ZEN098V130A24LS
E = ZEN132V130A24LS
F = ZEN164V130A24LS
A
A
B
B
C
C
D
A
A
BB
C
C
D
D
D
E
E
F
F
VOUT Peak vs. IFLT RMS (IOUT = 0)
VOUT Peak (V)
IFLT RMS (A)
Time-to-Trip vs. IFLT RMS (IOUT = 0)
Time-to-Trip (s)Time-to-Trip (s)
IFLT RMS (A)
-50 -40 -30 -20 -10 0
100
10
1
0.1
0.01
0.001
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0.0
-40 -20 020406080 100
IHOLD (A)
Ambient Temperature (˚C)
Temperature Effect on IHOLD (IFLT = 0)
0510 15 20 3025 35 40 45
10
1
0.1
0.01
0.001
IPTC RMS (A)
Time-to-Trip vs. IPTC RMS (IFLT = 0)
A
BC
A
B
C
A
B
C
A
C
D
B
0.0
-0.2
-0.4
-0.6
-0.8
-1.0
-1.2
-50 -40 -30 -20 -10 0
A = ZENxxxV1yyA24LS
B = ZENxxxV230A16LS
C = ZENxxxV075A48LS
A = ZENxxxV1yyA24LS
B = ZENxxxV230A16LS
C = ZENxxxV075A48LS
A = ZENxxxV130A24LS
B = ZENxxxV230A16LS
C = ZENxxxV075A48LS
D = ZENxxxV115A24LS
A = ZENxxxV1yyA24LS
B = ZENxxxV230A16LS
C = ZENxxxV075A48LS
VOUT Peak vs. IFLT RMS (IOUT = 0)
VOUT Peak (V)
IFLT RMS (A)
Time-to-Trip vs. IFLT RMS (IOUT = 0)
Time-to-Trip (s)
Time-to-Trip (s)
IFLT RMS (A)
-50 -40 -30 -20 -10 0
100
10
1
0.1
0.01
0.001
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0.0
-40 -20 020406080 100
IHOLD (A)
Ambient Temperature (˚C)
Temperature Effect on IHOLD (IFLT = 0)
0510 15 20 3025 35 40 45
10
1
0.1
0.01
0.001
IPTC RMS (A)
Time-to-Trip vs. IPTC RMS (IFLT = 0)
A
BC
A
B
C
A
B
C
A
C
D
B
0.0
-0.2
-0.4
-0.6
-0.8
-1.0
-1.2
-50 -40 -30 -20 -10 0
A = ZENxxxV1yyA24LS
B = ZENxxxV230A16LS
C = ZENxxxV075A48LS
A = ZENxxxV1yyA24LS
B = ZENxxxV230A16LS
C = ZENxxxV075A48LS
A = ZENxxxV130A24LS
B = ZENxxxV230A16LS
C = ZENxxxV075A48LS
D = ZENxxxV115A24LS
A = ZENxxxV1yyA24LS
B = ZENxxxV230A16LS
C = ZENxxxV075A48LS
VOUT Peak vs. IFLT RMS (IOUT = 0)
VOUT Peak (V)
IFLT RMS (A)
Time-to-Trip vs. IFLT RMS (IOUT = 0)
Time-to-Trip (s)
Time-to-Trip (s)
IFLT RMS (A)
-50 -40 -30 -20 -10 0
100
10
1
0.1
0.01
0.001
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0.0
-40 -20 020406080 100
IHOLD (A)
Ambient Temperature (˚C)
Temperature Effect on IHOLD (IFLT = 0)
0510 15 20 3025 35 40 45
10
1
0.1
0.01
0.001
IPTC RMS (A)
Time-to-Trip vs. IPTC RMS (IFLT = 0)
A
BC
A
B
C
A
B
C
A
C
D
B
0.0
-0.2
-0.4
-0.6
-0.8
-1.0
-1.2
-50 -40 -30 -20 -10 0
A = ZENxxxV1yyA24LS
B = ZENxxxV230A16LS
C = ZENxxxV075A48LS
A = ZENxxxV1yyA24LS
B = ZENxxxV230A16LS
C = ZENxxxV075A48LS
A = ZENxxxV130A24LS
B = ZENxxxV230A16LS
C = ZENxxxV075A48LS
D = ZENxxxV115A24LS
A = ZENxxxV1yyA24LS
B = ZENxxxV230A16LS
C = ZENxxxV075A48LS
RoHS Compliant, ELV Compliant Specifications subject to change without notice. ©2016 Littelfuse, Inc. 29
PolyZen Devices
Polymer Protected Zener Diode
IHOLD (A)
Ambient Temperature (°C)
3
2.5
2
1. 5
1
0.5
0
Temperature Effect on IHOLD (IFLT = 0)
-40 -20 020406080100
A = ZENxxxV130A16YM
B = ZENxxxV175A12YM
A
B
VOUT Peak vs. IFLT RMS (IOUT = 0)
V
OUT
Peak (V)
IFLT RMS (A)
18.0
16.0
14.0
12.0
10.0
8.0
6.0
4.0
2.0
0.0
0123 45678
A
B
C
A = ZEN056VyyyAzzYC
B = ZEN132V130A24YC
C = ZEN132V2yyA16YC
Time-to-Trip vs. IPTC RMS (IFLT = 0)
IPTC RMS (A)
Time-to-Trip (s)
100
10
1
0.1
0.01
0.001
02010 4030
A
BA = ZENxxxV130A16YM
B = ZENxxxV175A12YM
IFLT RMS (A)
Time-to-Trip vs. IFLT RMS (IOUT = 0)
Time-to-Trip (s)
100
10
1
0.1
0.01
0.0 0.5 1. 01.5 2.0 2.5 3.0 3.5 4.0
A
BC
D
A = ZEN056V130A24YC
B = ZEN132V130A24YC
C = ZEN056V2yyA16YC
D = ZEN132V2yyA16YC
Figures PZ10-PZ15 — Typical Performance Curves for PolyZen Devices - YM Series
Figures PZ16-PZ21 — Typical Performance Curves for PolyZen Devices - YC Series
Figure PZ10 Figure PZ11
Figure PZ12 Figure PZ13
Figure PZ14 Figure PZ15
Figure PZ16 Figure PZ17
VOUT Peak vs. IFLT RMS (IOUT = 0)
VOUT Peak vs. IFLT RMS (IOUT = 0)
VOUT Peak (V)
VOUT Peak (V)
IFLT RMS (A)
IFLT RMS (A)
01234
-40 -30 -20 -100
5678
18.0
16.0
14.0
12.0
10.0
8.0
6.0
4.0
2.0
0.0
0.0
-0.2
-0.4
-0.6
-0.8
-1.0
-1.2
-1.4
-1.6
-1.8
-2.0
A
BCA = ZEN056V1yyAzzYM
B = ZEN132V130A16YM
C = ZEN132V175A12YM
A
B
A = ZEN056V130A16YM
B = ZENxxxV1yyAzzYM
Time-to-Trip vs. IFLT RMS (IOUT = 0)
IFLT RMS (A)
Time-to-Trip (s)
100
10
1
0.1
0.01
0.0 0.5 1. 01.5 2.0 2.5 3.0 3.5 4.0
A
B
C
D
A = ZEN056V130A16YM
B = ZEN056V175A12YM
C = ZEN132V130A16YM
D = ZEN132V175A12YM
Time-to-Trip vs. IFLT RMS (IOUT = 0)
IFLT RMS (A)
Time-to-Trip (s)
100
10
1
0.1
0.01
0.001
-40 -30 -20 -1
00
A
B
C
A = ZEN056V130A16YM
B = ZEN132V130A16YM
C = ZENxxxV175A12YM
V
OUT
Peak vs. I
FLT
RMS (I
OUT
= 0)
VOUT Peak vs. IFLT RMS (IOUT = 0)
V
OUT
Peak (V)
VOUT Peak (V)
IFLT RMS (A)
IFLT RMS (A)
01234
-40 -30 -20 -100
5678
18.0
16.0
14.0
12.0
10.0
8.0
6.0
4.0
2.0
0.0
0.0
-0.2
-0.4
-0.6
-0.8
-1.0
-1.2
-1.4
-1.6
-1.8
-2.0
A
BCA = ZEN056V1yyAzzYM
B = ZEN132V130A16YM
C = ZEN132V175A12YM
A
B
A = ZEN056V130A16YM
B = ZENxxxV1yyAzzYM
Time-to-Trip vs. I
FLT
RMS (I
OUT
= 0)
IFLT RMS (A)
Time-to-Trip (s)
100
10
1
0.1
0.01
0.0 0.5 1. 01.5 2.0 2.5 3.0 3.5 4.0
A
B
C
D
A = ZEN056V130A16YM
B = ZEN056V175A12YM
C = ZEN132V130A16YM
D = ZEN132V175A12YM
Time-to-Trip vs. IFLT RMS (IOUT = 0)
IFLT RMS (A)
Time-to-Trip (s)
100
10
1
0.1
0.01
0.001
-40 -30 -20 -100
A
B
C
A = ZEN056V130A16YM
B = ZEN132V130A16YM
C = ZENxxxV175A12YM
IHOLD (A)
Ambient Temperature (°C)
3
2.5
2
1. 5
1
0.5
0
Temperature Effect on I
HOLD
(I
FLT
= 0)
-40 -20 020406080100
A = ZENxxxV130A16YM
B = ZENxxxV175A12YM
A
B
VOUT Peak vs. IFLT RMS (IOUT = 0)
VOUT Peak (V)
IFLT RMS (A)
18.0
16.0
14.0
12.0
10.0
8.0
6.0
4.0
2.0
0.0
0123 45678
A
B
C
A = ZEN056VyyyAzzYC
B = ZEN132V130A24YC
C = ZEN132V2yyA16YC
Time-to-Trip vs. IPTC RMS (IFLT = 0)
IPTC RMS (A)
Time-to-Trip (s)
100
10
1
0.1
0.01
0.001
02010 4030
A
BA = ZENxxxV130A16YM
B = ZENxxxV175A12YM
IFLT RMS (A)
Time-to-Trip vs. IFLT RMS (IOUT = 0)
Time-to-Trip (s)
100
10
1
0.1
0.01
0.0 0.5 1. 01.5 2.0 2.5 3.0 3.5 4.0
A
BC
D
A = ZEN056V130A24YC
B = ZEN132V130A24YC
C = ZEN056V2yyA16YC
D = ZEN132V2yyA16YC
RoHS Compliant, ELV Compliant
Specifications subject to change without notice. ©2016 Littelfuse, Inc.
30
PolyZen Devices
Polymer Protected Zener Diode
Table PZ3 — General Characteristics for PolyZen Devices
Operating temperature range -40° to +85°C
Storage temperature -40° to +85°C
ESD withstand 15kV Human body model
Diode capacitance 4200pF Typical @ 1MHz, 1V RMS
Construction RoHS compliant
Figures PZ16-PZ21 — Typical Performance Curves for PolyZen Devices - YC Series (Cont’d)
35
30
25
20
15
10
5
0
350
300
250
200
150
100
50
0
0 0.01 0.02 0.03 0.04 0.05 0.06 0.07 0.08
Voltage (V) and Current (A)
Power (Watts)
Time (s)
Hot-Plug Response
ZEN056V130A24LS vs. a 22V/120W Universal Power Supply
Capacitive
Current Spike
VOUT Peak
Current Pulled to
GND via Diode
Supply Voltage
Dropped by Current
Supply Voltage
Returns to Normal
PPTC Switches to
High Resistance
Output Voltage
Remains Clamped
A
A
D
D
B
B
C
C
A = VIN
B = VOUT
C = CURRENT (IFLT)
D = POWER
Figures PZ22-PZ34 — Basic Operation Examples for PolyZen Devices - LS Series
Figure PZ22
Figure PZ18
Figure PZ20
Figure PZ19
Figure PZ21
V
OUT
Peak vs. I
FLT
RMS (I
OUT
= 0)
V
OUT
Peak (V)
IFLT RMS (A)
0.0
-0.2
-0.4
-0.6
-0.8
-1.0
-1.2
-40 -30 -20 -100
A
B
C
D
A
B
C
A = ZEN056V130A24YC
B = ZEN056V2yyA16YC
C = ZEN132V130A24YC
D = ZEN132V2yyA16YC
IHOLD (A)
Ambient Temperature (°C)
4
3.5
3
2.5
2
1. 5
1
0.5
0
Temperature Effect on IHOLD (IFLT = 0)
-40 -20 020406080100
A = ZENxxxV130A24YC
B = ZENxxxV230A16YC
C = ZENxxxV260A16YC
IFLT RMS (A)
Time-to-Trip vs. I
FLT
RMS (I
OUT
= 0)
Time-to-Trip (s)
100
10
1
0.1
0.01
0.001
-40 -30 -20 -1
00
A
B
C
D
A = ZEN056V130A24YC
B = ZEN056V2yyA16YC
C = ZEN132V130A24YC
D = ZEN132V2yyA16YC
Time-to-Trip vs. IPTC RMS (IFLT = 0)
IPTC RMS (A)
Time-to-Trip (s)
100
10
1
0.1
0.01
0.001
010203
04
0
A
BA = ZENxxxV130A24YC
B = ZENxxxV2yyA16YC
RoHS Compliant, ELV Compliant Specifications subject to change without notice. ©2016 Littelfuse, Inc. 31
PolyZen Devices
Polymer Protected Zener Diode
Figure PZ23
Figure PZ25
Figure PZ27
Figure PZ29
Figure PZ24
Figure PZ26
Figure PZ28
Figure PZ30
20
18
16
14
12
10
8
6
4
2
0
-0.02 0.02 0.06 0.10 0.14 0.18
Voltage (V) or Current (A)
18
16
14
12
10
8
6
4
2
0
Voltage (V) or Current (A)
50
40
30
20
10
0
Voltage (V) or Current (A)
20
15
10
5
0
Voltage (V) or Current (A)
20
15
10
5
0
Voltage (V) or Current (A)Voltage (V) or Current (A)
26
24
22
20
18
16
14
12
10
8
6
4
2
0
Voltage (V) or Current (A)
30
25
20
15
10
5
0
Voltage (V) or Current (A)
30
25
20
15
10
5
0
Voltage (V) or Current (A)
24
22
20
18
16
14
12
10
8
6
4
2
0
22
20
18
16
14
12
10
8
6
4
2
0
Voltage (V) or Current (A)
50
45
40
35
30
25
20
15
10
5
0
Voltage (V) or Current (A)
24
22
20
18
16
14
12
10
8
6
4
2
0
V
oltage (V) or Current (A)
Typical Fault Response: ZEN056V1xxA24LS
20V, 3.5A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN059V130A24LS
24V, 6A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN065V130A24LS
24V, 5.0A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN098V130A24LS
24V, 3.5A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN132V130A24LS
24V, 2.0A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN164V130A24LS
24V, 1.0A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN056V230A16LS
16V, 5.0A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN065V230A16LS
16V, 3.5A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN098V230A16LS
16V, 3.5A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN132V230A16LS
20V, 2.0A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN056V075A48LS
48V, 10.0A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN132V075A48LS
48V, 2.0A Current Limited Source (IOUT=0)
Time (s)
0.02 0.05 0.10 0.15
Time (s)
0 0.01 0.02 0.03 0.04 0.05 0.06 0.07 0.08 0.09 0.10
Time (s)
0 0.05 0.10 0.15 0.20 0.25 0.30 0.35 0.40 0.45 0.50
Time (s)
0 0.10 0.20 0.30
Time (s)
0 0.05 0.10 0.15 0.20
Time (s)
0 0.020.01 0.03 0.04
Time (s)
0 0.05 0.10 0.15 0.20 0.25 0.30
Time (s)
0 0.10 0.20 0.30
Time (s)
0 0.10 0.20 0.30 0.40 0.50
Time (s)
0 0.05 0.10 0.15
Time (s)
A
B
C
A
B
C
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
0 0.020.04 0.06 0.08 0.10 0.12 0.14 0.16 0.18 0.20
Time (s)
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
20
18
16
14
12
10
8
6
4
2
0
-0.02 0.02 0.06 0.10 0.14 0.18
V
oltage (V) or Current (A)
18
16
14
12
10
8
6
4
2
0
Voltage (V) or Current (A)
50
40
30
20
10
0
Voltage (V) or Current (A)
20
15
10
5
0
Voltage (V) or Current (A)
20
15
10
5
0
Voltage (V) or Current (A)Voltage (V) or Current (A)
26
24
22
20
18
16
14
12
10
8
6
4
2
0
Voltage (V) or Current (A)
30
25
20
15
10
5
0
Voltage (V) or Current (A)
30
25
20
15
10
5
0
Voltage (V) or Current (A)
24
22
20
18
16
14
12
10
8
6
4
2
0
22
20
18
16
14
12
10
8
6
4
2
0
Voltage (V) or Current (A)
50
45
40
35
30
25
20
15
10
5
0
Voltage (V) or Current (A)
24
22
20
18
16
14
12
10
8
6
4
2
0
Voltage (V) or Current (A)
Typical Fault Response: ZEN056V1xxA24LS
20V, 3.5A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN059V130A24LS
24V, 6A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN065V130A24LS
24V, 5.0A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN098V130A24LS
24V, 3.5A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN132V130A24LS
24V, 2.0A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN164V130A24LS
24V, 1.0A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN056V230A16LS
16V, 5.0A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN065V230A16LS
16V, 3.5A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN098V230A16LS
16V, 3.5A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN132V230A16LS
20V, 2.0A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN056V075A48LS
48V, 10.0A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN132V075A48LS
48V, 2.0A Current Limited Source (IOUT=0)
Time (s)
0.02 0.05 0.10 0.15
Time (s)
0 0.01 0.02 0.03 0.04 0.05 0.06 0.07 0.08 0.09 0.10
Time (s)
0 0.05 0.10 0.15 0.20 0.25 0.30 0.35 0.40 0.45 0.50
Time (s)
0 0.10 0.20 0.30
Time (s)
0 0.05 0.10 0.15 0.20
Time (s)
0 0.020.01 0.03 0.04
Time (s)
0 0.05 0.10 0.15 0.20 0.25 0.30
Time (s)
0 0.10 0.20 0.30
Time (s)
0 0.10 0.20 0.30 0.40 0.50
Time (s)
0 0.05 0.10 0.15
Time (s)
A
B
C
A
B
C
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
0 0.020.04 0.06 0.08 0.10 0.12 0.14 0.16 0.18 0.20
Time (s)
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
20
18
16
14
12
10
8
6
4
2
0
-0.02 0.02 0.06 0.10 0.14 0.18
Voltage (V) or Current (A)
18
16
14
12
10
8
6
4
2
0
Voltage (V) or Current (A)
50
40
30
20
10
0
Voltage (V) or Current (A)
20
15
10
5
0
Voltage (V) or Current (A)
20
15
10
5
0
Voltage (V) or Current (A)Voltage (V) or Current (A)
26
24
22
20
18
16
14
12
10
8
6
4
2
0
Voltage (V) or Current (A)
30
25
20
15
10
5
0
Voltage (V) or Current (A)
30
25
20
15
10
5
0
Voltage (V) or Current (A)
24
22
20
18
16
14
12
10
8
6
4
2
0
22
20
18
16
14
12
10
8
6
4
2
0
V
oltage (V) or Current (A)
50
45
40
35
30
25
20
15
10
5
0
Voltage (V) or Current (A)
24
22
20
18
16
14
12
10
8
6
4
2
0
Voltage (V) or Current (A)
Typical Fault Response: ZEN056V1xxA24LS
20V, 3.5A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN059V130A24LS
24V, 6A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN065V130A24LS
24V, 5.0A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN098V130A24LS
24V, 3.5A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN132V130A24LS
24V, 2.0A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN164V130A24LS
24V, 1.0A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN056V230A16LS
16V, 5.0A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN065V230A16LS
16V, 3.5A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN098V230A16LS
16V, 3.5A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN132V230A16LS
20V, 2.0A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN056V075A48LS
48V, 10.0A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN132V075A48LS
48V, 2.0A Current Limited Source (IOUT=0)
Time (s)
0.02 0.05 0.10 0.15
Time (s)
0 0.01 0.02 0.03 0.04 0.05 0.06 0.07 0.08 0.09 0.10
Time (s)
0 0.05 0.10 0.15 0.20 0.25 0.30 0.35 0.40 0.45 0.50
Time (s)
0 0.10 0.20 0.30
Time (s)
0 0.05 0.10 0.15 0.20
Time (s)
0 0.020.01 0.03 0.04
Time (s)
0 0.05 0.10 0.15 0.20 0.25 0.30
Time (s)
0 0.10 0.20 0.30
Time (s)
0 0.10 0.20 0.30 0.40 0.50
Time (s)
0 0.05 0.10 0.15
Time (s)
A
B
C
A
B
C
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
0 0.020.04 0.06 0.08 0.10 0.12 0.14 0.16 0.18 0.20
Time (s)
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
20
18
16
14
12
10
8
6
4
2
0
-0.02 0.02 0.06 0.10 0.14 0.18
Voltage (V) or Current (A)
18
16
14
12
10
8
6
4
2
0
Voltage (V) or Current (A)
50
40
30
20
10
0
Voltage (V) or Current (A)
20
15
10
5
0
Voltage (V) or Current (A)
20
15
10
5
0
Voltage (V) or Current (A)Voltage (V) or Current (A)
26
24
22
20
18
16
14
12
10
8
6
4
2
0
V
oltage (V) or Current (A)
30
25
20
15
10
5
0
Voltage (V) or Current (A)
30
25
20
15
10
5
0
Voltage (V) or Current (A)
24
22
20
18
16
14
12
10
8
6
4
2
0
22
20
18
16
14
12
10
8
6
4
2
0
Voltage (V) or Current (A)
50
45
40
35
30
25
20
15
10
5
0
Voltage (V) or Current (A)
24
22
20
18
16
14
12
10
8
6
4
2
0
Voltage (V) or Current (A)
Typical Fault Response: ZEN056V1xxA24LS
20V, 3.5A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN059V130A24LS
24V, 6A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN065V130A24LS
24V, 5.0A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN098V130A24LS
24V, 3.5A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN132V130A24LS
24V, 2.0A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN164V130A24LS
24V, 1.0A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN056V230A16LS
16V, 5.0A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN065V230A16LS
16V, 3.5A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN098V230A16LS
16V, 3.5A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN132V230A16LS
20V, 2.0A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN056V075A48LS
48V, 10.0A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN132V075A48LS
48V, 2.0A Current Limited Source (IOUT=0)
Time (s)
0.02 0.05 0.10 0.15
Time (s)
0 0.01 0.02 0.03 0.04 0.05 0.06 0.07 0.08 0.09 0.10
Time (s)
0 0.05 0.10 0.15 0.20 0.25 0.30 0.35 0.40 0.45 0.50
Time (s)
0 0.10 0.20 0.30
Time (s)
0 0.05 0.10 0.15 0.20
Time (s)
0 0.020.01 0.03 0.04
Time (s)
0 0.05 0.10 0.15 0.20 0.25 0.30
Time (s)
0 0.10 0.20 0.30
Time (s)
0 0.10 0.20 0.30 0.40 0.50
Time (s)
0 0.05 0.10 0.15
Time (s)
A
B
C
A
B
C
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
0 0.020.04 0.06 0.08 0.10 0.12 0.14 0.16 0.18 0.20
Time (s)
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
20
18
16
14
12
10
8
6
4
2
0
-0.02 0.02 0.06 0.10 0.14 0.18
Voltage (V) or Current (A)
18
16
14
12
10
8
6
4
2
0
Voltage (V) or Current (A)
50
40
30
20
10
0
Voltage (V) or Current (A)
20
15
10
5
0
Voltage (V) or Current (A)
20
15
10
5
0
Voltage (V) or Current (A)Voltage (V) or Current (A)
26
24
22
20
18
16
14
12
10
8
6
4
2
0
Voltage (V) or Current (A)
30
25
20
15
10
5
0
Voltage (V) or Current (A)
30
25
20
15
10
5
0
V
oltage (V) or Current (A)
24
22
20
18
16
14
12
10
8
6
4
2
0
22
20
18
16
14
12
10
8
6
4
2
0
Voltage (V) or Current (A)
50
45
40
35
30
25
20
15
10
5
0
Voltage (V) or Current (A)
24
22
20
18
16
14
12
10
8
6
4
2
0
Voltage (V) or Current (A)
Typical Fault Response: ZEN056V1xxA24LS
20V, 3.5A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN059V130A24LS
24V, 6A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN065V130A24LS
24V, 5.0A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN098V130A24LS
24V, 3.5A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN132V130A24LS
24V, 2.0A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN164V130A24LS
24V, 1.0A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN056V230A16LS
16V, 5.0A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN065V230A16LS
16V, 3.5A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN098V230A16LS
16V, 3.5A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN132V230A16LS
20V, 2.0A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN056V075A48LS
48V, 10.0A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN132V075A48LS
48V, 2.0A Current Limited Source (IOUT=0)
Time (s)
0.02 0.05 0.10 0.15
Time (s)
0 0.01 0.02 0.03 0.04 0.05 0.06 0.07 0.08 0.09 0.10
Time (s)
0 0.05 0.10 0.15 0.20 0.25 0.30 0.35 0.40 0.45 0.50
Time (s)
0 0.10 0.20 0.30
Time (s)
0 0.05 0.10 0.15 0.20
Time (s)
0 0.020.01 0.03 0.04
Time (s)
0 0.05 0.10 0.15 0.20 0.25 0.30
Time (s)
0 0.10 0.20 0.30
Time (s)
0 0.10 0.20 0.30 0.40 0.50
Time (s)
0 0.05 0.10 0.15
Time (s)
A
B
C
A
B
C
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
0 0.020.04 0.06 0.08 0.10 0.12 0.14 0.16 0.18 0.20
Time (s)
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
20
18
16
14
12
10
8
6
4
2
0
-0.02 0.02 0.06 0.10 0.14 0.18
Voltage (V) or Current (A)
18
16
14
12
10
8
6
4
2
0
Voltage (V) or Current (A)
50
40
30
20
10
0
Voltage (V) or Current (A)
20
15
10
5
0
Voltage (V) or Current (A)
20
15
10
5
0
Voltage (V) or Current (A)Voltage (V) or Current (A)
26
24
22
20
18
16
14
12
10
8
6
4
2
0
Voltage (V) or Current (A)
30
25
20
15
10
5
0
V
oltage (V) or Current (A)
30
25
20
15
10
5
0
Voltage (V) or Current (A)
24
22
20
18
16
14
12
10
8
6
4
2
0
22
20
18
16
14
12
10
8
6
4
2
0
Voltage (V) or Current (A)
50
45
40
35
30
25
20
15
10
5
0
Voltage (V) or Current (A)
24
22
20
18
16
14
12
10
8
6
4
2
0
Voltage (V) or Current (A)
Typical Fault Response: ZEN056V1xxA24LS
20V, 3.5A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN059V130A24LS
24V, 6A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN065V130A24LS
24V, 5.0A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN098V130A24LS
24V, 3.5A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN132V130A24LS
24V, 2.0A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN164V130A24LS
24V, 1.0A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN056V230A16LS
16V, 5.0A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN065V230A16LS
16V, 3.5A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN098V230A16LS
16V, 3.5A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN132V230A16LS
20V, 2.0A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN056V075A48LS
48V, 10.0A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN132V075A48LS
48V, 2.0A Current Limited Source (IOUT=0)
Time (s)
0.02 0.05 0.10 0.15
Time (s)
0 0.01 0.02 0.03 0.04 0.05 0.06 0.07 0.08 0.09 0.10
Time (s)
0 0.05 0.10 0.15 0.20 0.25 0.30 0.35 0.40 0.45 0.50
Time (s)
0 0.10 0.20 0.30
Time (s)
0 0.05 0.10 0.15 0.20
Time (s)
0 0.020.01 0.03 0.04
Time (s)
0 0.05 0.10 0.15 0.20 0.25 0.30
Time (s)
0 0.10 0.20 0.30
Time (s)
0 0.10 0.20 0.30 0.40 0.50
Time (s)
0 0.05 0.10 0.15
Time (s)
A
B
C
A
B
C
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
0 0.020.04 0.06 0.08 0.10 0.12 0.14 0.16 0.18 0.20
Time (s)
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
20
18
16
14
12
10
8
6
4
2
0
-0.02 0.02 0.06 0.10 0.14 0.18
Voltage (V) or Current (A)
18
16
14
12
10
8
6
4
2
0
Voltage (V) or Current (A)
50
40
30
20
10
0
Voltage (V) or Current (A)
20
15
10
5
0
V
oltage (V) or Current (A)
20
15
10
5
0
Voltage (V) or Current (A)Voltage (V) or Current (A)
26
24
22
20
18
16
14
12
10
8
6
4
2
0
Voltage (V) or Current (A)
30
25
20
15
10
5
0
Voltage (V) or Current (A)
30
25
20
15
10
5
0
Voltage (V) or Current (A)
24
22
20
18
16
14
12
10
8
6
4
2
0
22
20
18
16
14
12
10
8
6
4
2
0
Voltage (V) or Current (A)
50
45
40
35
30
25
20
15
10
5
0
Voltage (V) or Current (A)
24
22
20
18
16
14
12
10
8
6
4
2
0
Voltage (V) or Current (A)
Typical Fault Response: ZEN056V1xxA24LS
20V, 3.5A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN059V130A24LS
24V, 6A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN065V130A24LS
24V, 5.0A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN098V130A24LS
24V, 3.5A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN132V130A24LS
24V, 2.0A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN164V130A24LS
24V, 1.0A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN056V230A16LS
16V, 5.0A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN065V230A16LS
16V, 3.5A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN098V230A16LS
16V, 3.5A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN132V230A16LS
20V, 2.0A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN056V075A48LS
48V, 10.0A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN132V075A48LS
48V, 2.0A Current Limited Source (IOUT=0)
Time (s)
0.02 0.05 0.10 0.15
Time (s)
0 0.01 0.02 0.03 0.04 0.05 0.06 0.07 0.08 0.09 0.10
Time (s)
0 0.05 0.10 0.15 0.20 0.25 0.30 0.35 0.40 0.45 0.50
Time (s)
0 0.10 0.20 0.30
Time (s)
0 0.05 0.10 0.15 0.20
Time (s)
0 0.020.01 0.03 0.04
Time (s)
0 0.05 0.10 0.15 0.20 0.25 0.30
Time (s)
0 0.10 0.20 0.30
Time (s)
0 0.10 0.20 0.30 0.40 0.50
Time (s)
0 0.05 0.10 0.15
Time (s)
A
B
C
A
B
C
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
0 0.020.04 0.06 0.08 0.10 0.12 0.14 0.16 0.18 0.20
Time (s)
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
20
18
16
14
12
10
8
6
4
2
0
-0.02 0.02 0.06 0.10 0.14 0.18
Voltage (V) or Current (A)
18
16
14
12
10
8
6
4
2
0
Voltage (V) or Current (A)
50
40
30
20
10
0
Voltage (V) or Current (A)
20
15
10
5
0
Voltage (V) or Current (A)
20
15
10
5
0
V
oltage (V) or Current (A)Voltage (V) or Current (A)
26
24
22
20
18
16
14
12
10
8
6
4
2
0
Voltage (V) or Current (A)
30
25
20
15
10
5
0
Voltage (V) or Current (A)
30
25
20
15
10
5
0
Voltage (V) or Current (A)
24
22
20
18
16
14
12
10
8
6
4
2
0
22
20
18
16
14
12
10
8
6
4
2
0
Voltage (V) or Current (A)
50
45
40
35
30
25
20
15
10
5
0
Voltage (V) or Current (A)
24
22
20
18
16
14
12
10
8
6
4
2
0
Voltage (V) or Current (A)
Typical Fault Response: ZEN056V1xxA24LS
20V, 3.5A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN059V130A24LS
24V, 6A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN065V130A24LS
24V, 5.0A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN098V130A24LS
24V, 3.5A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN132V130A24LS
24V, 2.0A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN164V130A24LS
24V, 1.0A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN056V230A16LS
16V, 5.0A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN065V230A16LS
16V, 3.5A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN098V230A16LS
16V, 3.5A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN132V230A16LS
20V, 2.0A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN056V075A48LS
48V, 10.0A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN132V075A48LS
48V, 2.0A Current Limited Source (IOUT=0)
Time (s)
0.02 0.05 0.10 0.15
Time (s)
0 0.01 0.02 0.03 0.04 0.05 0.06 0.07 0.08 0.09 0.10
Time (s)
0 0.05 0.10 0.15 0.20 0.25 0.30 0.35 0.40 0.45 0.50
Time (s)
0 0.10 0.20 0.30
Time (s)
0 0.05 0.10 0.15 0.20
Time (s)
0 0.020.01 0.03 0.04
Time (s)
0 0.05 0.10 0.15 0.20 0.25 0.30
Time (s)
0 0.10 0.20 0.30
Time (s)
0 0.10 0.20 0.30 0.40 0.50
Time (s)
0 0.05 0.10 0.15
Time (s)
A
B
C
A
B
C
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
0 0.020.04 0.06 0.08 0.10 0.12 0.14 0.16 0.18 0.20
Time (s)
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
Figures PZ22-PZ34 — Basic Operation Examples for PolyZen Devices - LS Series (Cont’d)
RoHS Compliant, ELV Compliant
Specifications subject to change without notice. ©2016 Littelfuse, Inc.
32
PolyZen Devices
Polymer Protected Zener Diode
20
18
16
14
12
10
8
6
4
2
0
-0.02 0.02 0.06 0.10 0.14 0.18
Voltage (V) or Current (A)
18
16
14
12
10
8
6
4
2
0
V
oltage (V) or Current (A)
50
40
30
20
10
0
Voltage (V) or Current (A)
20
15
10
5
0
Voltage (V) or Current (A)
20
15
10
5
0
Voltage (V) or Current (A)Voltage (V) or Current (A)
26
24
22
20
18
16
14
12
10
8
6
4
2
0
Voltage (V) or Current (A)
30
25
20
15
10
5
0
Voltage (V) or Current (A)
30
25
20
15
10
5
0
Voltage (V) or Current (A)
24
22
20
18
16
14
12
10
8
6
4
2
0
22
20
18
16
14
12
10
8
6
4
2
0
Voltage (V) or Current (A)
50
45
40
35
30
25
20
15
10
5
0
Voltage (V) or Current (A)
24
22
20
18
16
14
12
10
8
6
4
2
0
Voltage (V) or Current (A)
Typical Fault Response: ZEN056V1xxA24LS
20V, 3.5A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN059V130A24LS
24V, 6A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN065V130A24LS
24V, 5.0A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN098V130A24LS
24V, 3.5A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN132V130A24LS
24V, 2.0A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN164V130A24LS
24V, 1.0A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN056V230A16LS
16V, 5.0A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN065V230A16LS
16V, 3.5A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN098V230A16LS
16V, 3.5A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN132V230A16LS
20V, 2.0A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN056V075A48LS
48V, 10.0A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN132V075A48LS
48V, 2.0A Current Limited Source (IOUT=0)
Time (s)
0.02 0.05 0.10 0.15
Time (s)
0 0.01 0.02 0.03 0.04 0.05 0.06 0.07 0.08 0.09 0.10
Time (s)
0 0.05 0.10 0.15 0.20 0.25 0.30 0.35 0.40 0.45 0.50
Time (s)
0 0.10 0.20 0.30
Time (s)
0 0.05 0.10 0.15 0.20
Time (s)
0 0.020.01 0.03 0.04
Time (s)
0 0.05 0.10 0.15 0.20 0.25 0.30
Time (s)
0 0.10 0.20 0.30
Time (s)
0 0.10 0.20 0.30 0.40 0.50
Time (s)
0 0.05 0.10 0.15
Time (s)
A
B
C
A
B
C
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
0 0.020.04 0.06 0.08 0.10 0.12 0.14 0.16 0.18 0.20
Time (s)
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
20
18
16
14
12
10
8
6
4
2
0
-0.02 0.02 0.06 0.10 0.14 0.18
Voltage (V) or Current (A)
18
16
14
12
10
8
6
4
2
0
Voltage (V) or Current (A)
50
40
30
20
10
0
V
oltage (V) or Current (A)
20
15
10
5
0
Voltage (V) or Current (A)
20
15
10
5
0
Voltage (V) or Current (A)Voltage (V) or Current (A)
26
24
22
20
18
16
14
12
10
8
6
4
2
0
Voltage (V) or Current (A)
30
25
20
15
10
5
0
Voltage (V) or Current (A)
30
25
20
15
10
5
0
Voltage (V) or Current (A)
24
22
20
18
16
14
12
10
8
6
4
2
0
22
20
18
16
14
12
10
8
6
4
2
0
Voltage (V) or Current (A)
50
45
40
35
30
25
20
15
10
5
0
Voltage (V) or Current (A)
24
22
20
18
16
14
12
10
8
6
4
2
0
Voltage (V) or Current (A)
Typical Fault Response: ZEN056V1xxA24LS
20V, 3.5A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN059V130A24LS
24V, 6A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN065V130A24LS
24V, 5.0A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN098V130A24LS
24V, 3.5A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN132V130A24LS
24V, 2.0A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN164V130A24LS
24V, 1.0A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN056V230A16LS
16V, 5.0A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN065V230A16LS
16V, 3.5A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN098V230A16LS
16V, 3.5A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN132V230A16LS
20V, 2.0A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN056V075A48LS
48V, 10.0A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN132V075A48LS
48V, 2.0A Current Limited Source (IOUT=0)
Time (s)
0.02 0.05 0.10 0.15
Time (s)
0 0.01 0.02 0.03 0.04 0.05 0.06 0.07 0.08 0.09 0.10
Time (s)
0 0.05 0.10 0.15 0.20 0.25 0.30 0.35 0.40 0.45 0.50
Time (s)
0 0.10 0.20 0.30
Time (s)
0 0.05 0.10 0.15 0.20
Time (s)
0 0.020.01 0.03 0.04
Time (s)
0 0.05 0.10 0.15 0.20 0.25 0.30
Time (s)
0 0.10 0.20 0.30
Time (s)
0 0.10 0.20 0.30 0.40 0.50
Time (s)
0 0.05 0.10 0.15
Time (s)
A
B
C
A
B
C
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
0 0.020.04 0.06 0.08 0.10 0.12 0.14 0.16 0.18 0.20
Time (s)
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
20
18
16
14
12
10
8
6
4
2
0
-0.02 0.02 0.06 0.10 0.14 0.18
Voltage (V) or Current (A)
18
16
14
12
10
8
6
4
2
0
Voltage (V) or Current (A)
50
40
30
20
10
0
Voltage (V) or Current (A)
20
15
10
5
0
Voltage (V) or Current (A)
20
15
10
5
0
Voltage (V) or Current (A)
V
oltage (V) or Current (A)
26
24
22
20
18
16
14
12
10
8
6
4
2
0
Voltage (V) or Current (A)
30
25
20
15
10
5
0
Voltage (V) or Current (A)
30
25
20
15
10
5
0
Voltage (V) or Current (A)
24
22
20
18
16
14
12
10
8
6
4
2
0
22
20
18
16
14
12
10
8
6
4
2
0
Voltage (V) or Current (A)
50
45
40
35
30
25
20
15
10
5
0
Voltage (V) or Current (A)
24
22
20
18
16
14
12
10
8
6
4
2
0
Voltage (V) or Current (A)
Typical Fault Response: ZEN056V1xxA24LS
20V, 3.5A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN059V130A24LS
24V, 6A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN065V130A24LS
24V, 5.0A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN098V130A24LS
24V, 3.5A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN132V130A24LS
24V, 2.0A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN164V130A24LS
24V, 1.0A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN056V230A16LS
16V, 5.0A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN065V230A16LS
16V, 3.5A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN098V230A16LS
16V, 3.5A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN132V230A16LS
20V, 2.0A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN056V075A48LS
48V, 10.0A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN132V075A48LS
48V, 2.0A Current Limited Source (IOUT=0)
Time (s)
0.02 0.05 0.10 0.15
Time (s)
0 0.01 0.02 0.03 0.04 0.05 0.06 0.07 0.08 0.09 0.10
Time (s)
0 0.05 0.10 0.15 0.20 0.25 0.30 0.35 0.40 0.45 0.50
Time (s)
0 0.10 0.20 0.30
Time (s)
0 0.05 0.10 0.15 0.20
Time (s)
0 0.020.01 0.03 0.04
Time (s)
0 0.05 0.10 0.15 0.20 0.25 0.30
Time (s)
0 0.10 0.20 0.30
Time (s)
0 0.10 0.20 0.30 0.40 0.50
Time (s)
0 0.05 0.10 0.15
Time (s)
A
B
C
A
B
C
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
0 0.020.04 0.06 0.08 0.10 0.12 0.14 0.16 0.18 0.20
Time (s)
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
20
18
16
14
12
10
8
6
4
2
0
-0.02 0.02 0.06 0.10 0.14 0.18
Voltage (V) or Current (A)
18
16
14
12
10
8
6
4
2
0
Voltage (V) or Current (A)
50
40
30
20
10
0
Voltage (V) or Current (A)
20
15
10
5
0
Voltage (V) or Current (A)
20
15
10
5
0
Voltage (V) or Current (A)Voltage (V) or Current (A)
26
24
22
20
18
16
14
12
10
8
6
4
2
0
Voltage (V) or Current (A)
30
25
20
15
10
5
0
Voltage (V) or Current (A)
30
25
20
15
10
5
0
Voltage (V) or Current (A)
24
22
20
18
16
14
12
10
8
6
4
2
0
22
20
18
16
14
12
10
8
6
4
2
0
Voltage (V) or Current (A)
50
45
40
35
30
25
20
15
10
5
0
V
oltage (V) or Current (A)
24
22
20
18
16
14
12
10
8
6
4
2
0
Voltage (V) or Current (A)
Typical Fault Response: ZEN056V1xxA24LS
20V, 3.5A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN059V130A24LS
24V, 6A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN065V130A24LS
24V, 5.0A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN098V130A24LS
24V, 3.5A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN132V130A24LS
24V, 2.0A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN164V130A24LS
24V, 1.0A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN056V230A16LS
16V, 5.0A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN065V230A16LS
16V, 3.5A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN098V230A16LS
16V, 3.5A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN132V230A16LS
20V, 2.0A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN056V075A48LS
48V, 10.0A Current Limited Source (IOUT=0)
Typical Fault Response: ZEN132V075A48LS
48V, 2.0A Current Limited Source (IOUT=0)
Time (s)
0.02 0.05 0.10 0.15
Time (s)
0 0.01 0.02 0.03 0.04 0.05 0.06 0.07 0.08 0.09 0.10
Time (s)
0 0.05 0.10 0.15 0.20 0.25 0.30 0.35 0.40 0.45 0.50
Time (s)
0 0.10 0.20 0.30
Time (s)
0 0.05 0.10 0.15 0.20
Time (s)
0 0.020.01 0.03 0.04
Time (s)
0 0.05 0.10 0.15 0.20 0.25 0.30
Time (s)
0 0.10 0.20 0.30
Time (s)
0 0.10 0.20 0.30 0.40 0.50
Time (s)
0 0.05 0.10 0.15
Time (s)
A
B
C
A
B
C
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
0 0.020.04 0.06 0.08 0.10 0.12 0.14 0.16 0.18 0.20
Time (s)
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
Figure PZ31
Figure PZ33
Figure PZ32
Figure PZ34
Figure PZ35
Figure PZ37
Figure PZ36
Figure PZ38
Typical Fault Response: ZEN056V130A16YM
20V/3A Current Limited Source (IOUT = 0)
Typical Fault Response: ZEN056V175A12YM
12V/3A Current Limited Source (IOUT = 0)
Typical Fault Response: ZEN132V175A12YM
20V/1A Current Limited Source (IOUT = 0)
Time (s) Time (s)
Time (s)
25
20
15
10
5
0
15
10
5
0
0.00 0.05 0.10 0.15 0.00 0.05 0.10 0.15
0.00 0.05 0.10 0.15 0.20 0.25 0.00 0.05 0.10 0.15 0.20 0.25 0.30
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A
B
C
A
B
C
Typical Fault Response: ZEN132V130A16YM
20V/1A Current Limited Source (IOUT = 0)
Time (s)
25
20
15
10
5
0
25
20
15
10
5
0
A
B
C
A
B
C
Voltage (V) or Current (A)
Voltage (V) or Current (A)
Voltage (V) or Current (A)
Voltage (V) or Current (A)
Figures PZ22-PZ34 — Basic Operation Examples for PolyZen Devices - LS Series (Cont’d)
RoHS Compliant, ELV Compliant Specifications subject to change without notice. ©2016 Littelfuse, Inc. 33
PolyZen Devices
Polymer Protected Zener Diode
Table PZ4 - Packaging and Marking Information for PolyZen Devices
Part Number Bag Quantity Tape & Reel Quantity Standard Package
ZENxxxVyyyAzzLS 3,000 15,000
ZENxxxVyyyAzzYM 3,000 30,000
ZENxxxVyyyAzzYC 4,000 20,000
Figure PZ39
Figure PZ41
Figure PZ43
Figure PZ40
Figure PZ42
Figure PZ44
Typical Fault Response: ZEN056V130A24YC
24V/3A Current Limited Source (IOUT = 0)
Typical Fault Response: ZEN056V260A16YC
20V/3A Current Limited Source (IOUT = 0)
Typical Fault Response: ZEN132V230A16YC
20V/1A Current Limited Source (IOUT = 0)
Time (s)
25
20
15
10
5
0
25
20
15
10
5
0
25
20
15
10
5
0
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
0.00 0.05 0.10 0.15 0.20 0.25 0.30 0.35 0.40
Time (s)
Time (s)
0.00 0.05 0.10 0.15 0.20 0.25 0.30 0.35 0.40
A
B
C
A
B
C
0.00 0.10 0.20 0.30 0.40 0.50 0.60
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A
B
C
Time (s)
0.00 0.05 0.10 0.15 0.20 0.25 0.30 0.35 0.40
25
20
15
10
5
0
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
Typical Fault Response: ZEN056V230A16YC
20V/3A Current Limited Source (IOUT = 0)
Typical Fault Response: ZEN132V130A24YC
24V/1A Current Limited Source (IOUT = 0)
Typical Fault Response: ZEN132V260A16YC
20V/1A Current Limited Source (IOUT = 0)
A
B
C
Time (s)
0.00 0.10 0.20 0.30 0.40 0.50 0.60
25
20
15
10
5
0
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A
B
C
Time (s)
0.00 0.10 0.20 0.30 0.40 0.50 0.60
25
20
15
10
5
0
A
B
C
Voltage (V) or Current (A)
Voltage (V) or Current (A)
Voltage (V) or Current (A)
Voltage (V) or Current (A)
Voltage (V) or Current (A) Voltage (V) or Current (A)
Time (s)
0.00 0.05 0.10 0.15 0.20 0.25 0.30 0.35 0.40
25
20
15
10
5
0
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
20V/3A Current Limited Source (IOUT = 0)
Typical Fault Response: ZEN132V130A24YC
24V/1A Current Limited Source (IOUT = 0)
Typical Fault Response: ZEN132V260A16YC
20V/1A Current Limited Source (IOUT = 0)
A
B
C
Time (s)
0.00 0.10 0.20 0.30 0.40 0.50 0.60
25
20
15
10
5
0
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A
B
C
Time (s)
0.00 0.10 0.20 0.30 0.40 0.50 0.60
25
20
15
10
5
0
A
B
C
Voltage (V) or Current (A)
Voltage (V) or Current (A)
Voltage (V) or Current (A)
Figures PZ39-PZ44 — Basic Operation Examples for PolyZen Devices - YC Series
RoHS Compliant, ELV Compliant
Specifications subject to change without notice. ©2016 Littelfuse, Inc.
34
PolyZen Devices
Polymer Protected Zener Diode
C
L
W
B
A
H
ZENxxxVyyyAzzLS Devices
ZENxxxVyyyAzzYM Devices
ZENxxxVyyyAzzYC Devices
ZENxxxVyyyAzzLS Devices
ZENxxxVyyyAzzYM Devices
ZENxxxVyyyAzzYC Devices
A B C
Min Max Min Max Min Max
mm 3.85 4.15 3.85 4.15 1.40 2.00
in (0.152) (0.163) (0.152) (0.163) (0.055) (0.081)
A B C
Min Max Min Max Min Max
mm 3.00 3.40 2.30 2.70 1.10 1.30
in (0.118) (0.134) (0.091) (0.106) (0.043) (0.051)
A B C
Min Max Min Max Min Max
mm 4.80 5.20 3.80 4.20 1.20 1.40
in (0.190) (0.206) (0.150) (0.166) (0.047) (0.055)
Pin Number Pin Name Pin Function
1 VIN VIN = Protected input to Zener diode
2GND GND = Ground
3 VOUT VOUT = Zener regulated voltage output
Pin Number Pin Name Pin Function
1 VIN VIN = Protected input to Zener diode
2GND GND = Ground
3 VOUT VOUT = Zener regulated voltage output
Pin Number Pin Name Pin Function
1 VIN VIN = Protected input to Zener diode
2GND GND = Ground
3 VOUT VOUT = Zener regulated voltage output
2 GND
2.21mm
(0.087”)
0.56mm
(0.022”)
2.88mm
(0.1135”)
0.56mm
(0.022”)
0.33mm
(0.013”)
0.94mm
(0.037”)
0.94mm
(0.037”)
3 VOUT
VIN 1
Pin Configuration
(Top View)
Pad Dimensions
2 GND
2.21mm
(0.087”)
0.56mm
(0.022”)
2.88mm
(0.1135”)
0.56mm
(0.022”)
0.33mm
(0.013”)
0.94mm
(0.037”)
0.94mm
(0.037”)
3 VOUT
VIN 1
Pin Configuration
(Top View)
Pad Dimensions
A
B
C
Pin Configuration (Top View) Recommended Pad Dimensions (mm) Recommended Pad Layout (mm)
Pin Configuration (Top View) Recommended Pad Dimensions (mm) Recommended Pad Layout (mm)
2
GND
3
VOUT
1
VIN
2
GND
3
VOUT
1
VIN
2.50 2.19
3.20
0.80 (2X)
0.60 (3X)
4.00 2.03
5.00
1.51
1.97
0.51 (2X)
1.02 (2X)
2.50
1.20
0.90
0.80 (2X)
1. 00 (3X)
2.25
3.99
1.66
2.98
0.56 (2X)
1. 12 (2X)
Pin Configuration (Top View) Recommended Pad Dimensions (mm) Recommended Pad Layout (mm)
Pin Configuration (Top View) Recommended Pad Dimensions (mm) Recommended Pad Layout (mm)
2
GND
3
VOUT
1
VIN
2
GND
3
VOUT
1
V
IN
2.50 2.19
3.20
0.80 (2X)
0.60 (3X)
4.00 2.03
5.00
1.51
1.97
0.51 (2X)
1.02 (2X)
2.50
1.20
0.90
0.80 (2X)
1. 00 (3X)
2.25
3.99
1.66
2.98
0.56 (2X)
1. 12 (2X)
Pin Configuration
(Top View)
Pin Configuration
(Top View)
Recommended Pad
Dimensions (mm)
Recommended Pad
Dimensions (mm)
Recommended Pad
Layout (mm)
Recommended Pad
Layout (mm)
Table PZ5 — Dimensions in Millimeters and (Inches)
RoHS Compliant, ELV Compliant Specifications subject to change without notice. ©2016 Littelfuse, Inc. 35
PolyZen Devices
Polymer Protected Zener Diode
A0
B0
K0
2.00 ± 0.05Note 2
0.35 ± 0.05
4.00Note 1
8.00
ø1.5 + 0.1 / -0.0
ø1.50 Min
0.25 R
0.25
12.0 ± 0.3
5.50 ± 0.05Note 3
1.75 ± 0.10
A
A
R 0.3 Max
Solder Reflow and Rework Recommendation
Classification Reflow Profiles
ZENxxxVyyyAzzLS Devices
ZENxxxVyyyAzzYM Devices ZENxxxVyyyAzzYC Devices
Profile Feature Pb-Free Assembly Pb-Free Assembly
Average Ramp Up Rate (TsMAX to Tp) 3°C/ s Max 3°C/ s Max
Preheat
• Temperature Min (TsMIN)150°C 150°C
• Temperature Max (TsMAX)200°C 200°C
• Time (ts Preheat) 60-180 s 60-180 s
Time Maintained Above:
• Temperature (TL)217°C 217°C
• Time (tL)60-150 s 60-150 s
Peak/Classification Temperature (Tp) 260°C 250°C
Time within 5°C of Actual Peak Temperature
Time (tp) 20-40 s 20-40 s
Average Ramp Down Rate (Tp to TL) 6°C/ s Max 3°C/ s Max
Time 25°C to Peak Temperature 8 Minutes Max 8 Minutes Max
Note: All temperatures refer to top side of the package, measured on the package
Notes: 1. 10 sprocket hole pitch cumulative tolerance ±0.2
2. Camber in compliance with EIA 481
Tape and Reel Specifications for PolyZen Devices in Millimeters
Figure PZ46 — EIA Referenced Taped Component Dimensions for ZENxxxVyyyAzzLS
Devices in Millimeters (mm)
Description ZENxxxVyyyAzzLS Devices
A04.35
B04.35
K02.30
Figure PZ45
Critical Zone
TL to Tp
Ramp Up
t 25˚C to Peak
Reflow Profile Time
Ramp Down
ts
Preheat
Ts MAX
TL
Tp
tp
25
Ts MIN
tL
Temperature
RoHS Compliant, ELV Compliant
Specifications subject to change without notice. ©2016 Littelfuse, Inc.
36
PolyZen Devices
Polymer Protected Zener Diode
102.0 Ref
NMin
AMax
W2 (measured at hub)
W1 (measured at hub)
Matte Finish These Areas
Lock Feature (6 places)
See “Detail A”
Detail A
ø20.0 Min.
ø13.0 +0.5
–0.2
2.0 +/– 0.5
330.0 +0.25
–4.00
Description Dimension (mm)
AMax 330
NMin 102
W18.4
W211. 1
Figure PZ47 — Reel Dimensions for ZENxxxVyyyAzzLS Devices in Millimeters (mm)
SYMBOL A0B0K0P0P1P2B1Max
SPEC 2.90±0.10 3.55±0.10 1.27±0.10 4.00±0.10 4.00±0.10 2.00±0.05 4.35
SYMBOL TE1 F D0D1W D1Max
SPEC 0.25±0.02 1.75±0.10 3.50±0.05 1.55±0.05 1.00±0.10 8.00±0.30 1. 0
E1E2W
100mm
250mm
1mm MAX.
1mm MAX.
Allowable Camber to be 1mm/100mm
Noncumulative Over 250mm
F
Cover Tape
Embossment Center Lines
of Cavity
P2
P0
A0P1
B0
B1
T1
K1
S1
T2
K0
T
D0
10 pitches cumulative
tolerance on tape ±0.2 (±0.008)
D1 for components
2.0mm x 1.2mm
and larger
For Machine Reference Only
Including Draft and Radii
Concentric Around Bo USER DIRECTION OF FEED
08
06
04
02
H=8mm
H ±0.5
Ø178±1
3.0±0.5
4.0±0.5
R22
Ø10.0
13
5.0±0.5
Ø60.1
(H+3) ±0.5
2±0.5
1. 4
R1.9
120°
Ø13.5±0.5
R10.5
R0.5
08
06
04
02
RoHS Compliant, ELV Compliant Specifications subject to change without notice. ©2016 Littelfuse, Inc. 37
PolyZen Devices
Polymer Protected Zener Diode
ZEN 056V 130A 24 LS & YC & YM
Special Labeling
LS = 4.0 *4.0mm package size typical
YM = 2.5 *3.2mm package size typical
YC = 4.0 *5.0mm package size typical
VINT Max Rating (24 = 24V)
PPTC Hold Current Group (130 = 1.3A)
Zener Voltage Group (056 = 5.6V)
PolyZen Series
Item Dimension Tolerance
W12.00 ±0.10
P8.00 ±0.10
E1.75 ±0.10
F5.50 ±0.10
P22.00 ±0.10
D1.50 +0.10
-0.00
D11.50 ±0.10
P04.00 ±0.10
10P040.00 ±0.20
A04.20 ±0.10
B05.25 ±0.10
K01.40 ±0.10
t0.24 ±0.05
P0P2
D
1
F
P
B
B
D
W
B0
K0
A0
t
E
Ø13.5±0.5
2.5±0.5
2.3±0.5
12mm±0.5
H
Ø99.5±1
Ø330.0±1
4.0±0.5
P. S
6
1
2
3
4
5
6
7
Figure PZ50 — EIA Referenced Taped Component Dimensions for ZENxxxVyyyAzzYC
Devices in Millimeters (mm)
Figure PZ51 — Reel Dimensions for ZENxxxVyyyAzzYC Devices in Millimeters (mm)
Part Numbering System
RoHS Compliant, ELV Compliant
Specifications subject to change without notice. ©2016 Littelfuse, Inc.
38
PolyZen Devices
Polymer Protected Zener Diode
tnnn
12345
tnnn
1234567
Zener Diode Voltage Rating
nnn = 056 (5.6V)
nnn = 059 (5.9V)
nnn = 065 (6.5V)
nnn = 098 (9.8V)
nnn = 134 (13.4V)
nnn = 164 (16.4V)
Zener Diode Voltage Rating
nnn = 056 (5.6V)
Batch Number
Batch Number
ZENxxxVyyyAzzLS Devices
ZENxxxVyyyAzzYM Devices
Markings VZHold Current Special Code Part Description
0513F 5.6V 1.3A FZEN056V130A16YM
0517F 5.6V 1.75A FZEN056V175A12YM
1313F 13.2V 1.3A FZEN132V130A16YM
1317F 13.2V 1.75A FZEN132V175A12YM
ZENxxxVyyyAzzYC Devices
Markings VZHold Current Special Code Part Description
0513F 5.6V 1.3A FZEN056V130A24YC
052XF 5.6V 2.3A FZEN056V230A16YC
052XF 5.6V 2.6A FZEN056V230A16YC
1313F 13.2V 1.3A FZEN132V130A24YC
132XF 13.2V 2.3A FZEN132V230A16YC
132XF 13.2V 2.6A FZEN132V230A16YC
#### Last 4 digits of batch number
XXXXF
####
XXXXF
XXXXF
####
XXXXF
Part Marking System
RoHS Compliant, ELV Compliant Specifications subject to change without notice. ©2016 Littelfuse, Inc. 39
PolyZen Devices
Polymer Protected Zener Diode
Notice:
Littelfuse products are not designed for, and shall not be used for, any purpose (including, without limitation, automotive, military, aerospace, medical, life-saving, life-sustaining
or nuclear facility applications, devices intended for surgical implant into the body, or any other application in which the failure or lack of desired operation of the product may
result in personal injury, death, or property damage) other than those expressly set forth in applicable Littelfuse product documentation. Warranties granted by Littelfuse shall
be deemed void for products used for any purpose not expressly set forth in applicable Littelfuse documentation. Littelfuse shall not be liable for any claims or damages arising
out of products used in applications not expressly intended by Littelfuse as set forth in applicable Littelfuse documentation. The sale and use of Littelfuse products is subject
to Littelfuse Terms and Conditions of Sale, unless otherwise agreed by Littelfuse.
RoHS Compliant, ELV Compliant
Specifications subject to change without notice. ©2016 Littelfuse, Inc.
40
PolyZen Devices
Polymer Protected Zener Diode