3M TM Scotch-WeldTM Hot Melt Bonding Systems 4 2 3 Assembly 1 & packaging Reference guide Speed and versatility for applications success 3 Applications Success with 3MTM Scotch-WeldTM Hot Melt Adhesives Application Success: 5 Do 3MTM Scotch-WeldTM Hot Melt Adhesives offer the best options for success with your assembly and/or closure application? Answers to the following questions can help you decide. Would you like to improve your production speed and ease? 3M TM Scotch-Weld TM Hot Melt Adhesives liquefy when heated and quickly fill gaps and wet the bonding surface. Applied to only one surface, they cool, harden, and reach bond strength in seconds. You can move assemblies immediately and eliminate clamps, fixturing, and drying time and energy. Each adhesive is engineered for efficient application with an easy-to-use 3M portable applicator. Minimal operator training. 6 Would you like to improve appearance? Unlike mechanical fasteners and sealing tapes, hot melt adhesive is virtually invisible between the mating surfaces. What surfaces do you want to combine? 7 As you can see on pages 4 and 5, you can combine a wide variety of materials ranging from wood to corrugated cardboard, and even heat-sensitive foam. How much strength do you need? Select from a wide range of non-structural shear and peel strengths as shown on page 7. Structural strength has been defined as a minimum of 1,000 psi in overlap shear to permanently bond load-bearing components. Hot melt non-structural applications range from case sealing to bonding wood stiffeners to drawer bottoms, and securing components on a PC board. Electronics and Electrical * Easily secure wires to resist strain and breakage * Rigidize components on printed circuit boards to add stability during assembly, shipping and end use * Quick setting for potting even at great depth * Terminate coils What is the temperature in the end use environment? * Cable strain relief Hot melts are 100% solids thermoplastic resins that can re-melt after bonding if exposed to high enough temperature. As you can see on page 7, there are many options for selecting melt point and heat resistance for your specific application. * Bundle wires for convenient handling Do you need to reposition parts or delay assembly after adhesive application? Open time or bonding range is the maximum time between applying adhesive and joining the surfaces. The more quickly you join surfaces, the better the wetting action and bond. With 3M TM Scotch-Weld TM Hot Melt Adhesives you have wide latitude in bonding range selection as shown on page 7. Go to adhesives 3748VO: Light yellow, non-corrosive to copper, self extinguishing 3779: Alternatives 3748: Amber, high heat resistance, high strength Off-white, non-corrosive to copper 3764: Clear, bonds HSE/LSE plastics 3797: Off-white, good for potting 8 Application Success: Application Success: 9 14 15 10 11 12 16 Adhesive 13 Point-of-Purchase, Displays, Trade Exhibits * Bond foam spacers into 3-dimensional corrugated cardboard POP display * Attach samples of wood flooring, laminates, foams, fabric, or other materials and small products to display board * Attach decorations to baskets * Assemble dried floral arrangements * Bond polystyrene foam and other materials used in counter top displays, jewelry cases, and exhibitor booths Go to adhesives 3762LM: Light amber, fast-setting, low melt for heat sensitive surfaces 3792LM: Clear, multi-purpose low melt for heat sensitive surfaces Alternatives 3748: 2 Off-white, bonds polyolefins 17 Manual and Corrugated Carton Sealing * Bond and seal any size and configuration of corrugated carton quickly and invisibly including RSCs, FOLs, and 5-panel folded * Securely bond lightly waxed surfaces that may be difficult for tape to seal * Attach inserts including heat-sensitive foam * Self-contained portable applicator saves the cost of bulk equipment for recouperage, manual random size case sealing, and many contract packaging situations Go to adhesives 3762: Economical, tan, fast-setting with "hot tack" 3762LM: Light amber, low melt version of 3762 Alternatives 3738: Tan with high delivery rate, longer open time than 3762 3755LM: Clear, delayed tack, applied as ribbon for paper, corrugated 3750: Tan, low viscosity for high flow 3764: 3764: Clear, stays flexible at low temp Clear, bonds HSE/LSE plastics Application Success: Application Success: 22 18 23 24 19 20 25 21 Furniture and Woodworking * Wood to wood assembly of non-structural components in home and office furniture and cabinetry Product Assembly * Bond metal or plastic nameplates to trophies * Assemble or repair foundry sand cores * "Third-hand" holding components while structural wood adhesive cures * Attach removable credit cards or samples to mailers * Bond fabric to wood for welting and gimping * Quick easy assembly of many materials in luggage and carrying cases * Secure drawer bottoms, guides, and stiffeners * Attach upholstery to wood and plastic * Assemble many materials used in novelties, toys, games, and costumes * Assemble decorative crown moldings * Attach speaker fabric or protective metal grille Go to adhesives 3792: Clear, multi-purpose for wood, fabric, and upholstery 3792LM: Low melt version of 3792 for heat sensitive surfaces Alternatives 3738: 3747: 3789: Tan, high delivery rate Go to adhesives 3764: Clear, bonds HSE/LSE plastics, flexible at low temp 3792LM: Clear, multi-purpose low melt for heat sensitive surfaces Alternatives 3748: Off-white, resists thermal shock, bonds polyolefins Tan, bonds variety of wood, plastics, and lightweight metal 3796: Brown, impact resistant 3798LM: Clear removable "gummy glue" Tan, hi-performance on thin metal 3 Substrate Combinations for Applications Success Substrate Wood Wood 3747 3789 3738 Thin Metal 3776LM 3762LM 3792LM 3750LM Thin Metal Glass or ceramic Vinyl 3747 3796 3776LM 3747 3764 3796 3792LM 3789 3779 3796 N/R 3789 3779 3796 N/R 3731 3748 3764 61111 3792LM 3747 3796 3776LM 3747 3796 3776LM 3796 N/R 3796 N/R 3796 N/R 3747 3764 3796 3792LM 3796 N/R 3796 N/R 3764 3748 3792LM 3789 3779 3796 N/R 3789 3779 3796 N/R 3796 N/R 3789 3779 3796 N/R 3796 N/R 3731 3748 3764 61111 3792LM Glass or ceramic Vinyl Leather Polyolefin* Leather Polyolefin* Plastic** Paper Uncoated cardboard/ chipboard Coated cardboard/ chipboard Fabric Rigid foam*** Flexible foam Low melt adhesives 4 * E.g., polyethylene ** E.g., ABS, PVC, acrylic *** Beadboard/styrene 1 6111 is a family of products that includes 6111, 6111HT, and 6116. Removable 3 Must be sprayed on rigid foam to prevent cavitation. 2 Plastic** Paper Uncoated cardboard/ chipboard Coated cardboard/ chipboard Fabric 3764 3747 3748 3792LM 3776LM 3762 3792 61111 3747 3796 3776LM 3764 3747 3792 Rigid foam*** Flexible foam 3762LM 3755LM 3792LM 3750LM 3762 3792 3738 3750 3762LM 3792LM 3755LM 3764 3792 3747 3792LM 3776LM 3738 3747 61111 3776LM 3792LM 61111, 3 3792LM 3762LM 3755LM 3750LM 3738 3764 3747 61111 3792LM 3747 3796 3776LM 3747 3796 3776LM 3747 3796 3776LM 3747 3796 3776LM N/R 3776LM 3747 3796 3776LM 3792LM 3747 3764 3792LM 3747 3764 3796 3792LM 3764 3747 3796 3792LM 3747 3764 3796 3792LM N/R 3792LM 3747 3764 3796 3792LM 3789 3796 3779 N/R 3789 3779 3796 N/R 3789 3779 3796 N/R 3789 3779 3796 N/R 3789 3779 3796 N/R N/R N/R 3789 3779 3796 N/R 3789 3779 3796 N/R 3789 3779 3796 N/R 3789 3779 3796 N/R 3789 3779 3796 N/R 3789 3779 3796 N/R N/R N/R 3789 3779 3796 N/R 3731 3764 3748 61111 3792LM 3731 3764 3748 61111 3792LM 3764 3748 61111 3792LM 3731 3764 3748 61111 3792LM 3731 3764 3748 61111 3792LM 61111, 3 3792LM 3731 3748 3764 61111 3792LM 3731 3764 3747 3748 3792LM 3776LM 3764 3747 3748 3792LM 3776LM 3764 3747 3748 61111 3792LM 3776LM 3764 3747 3748 3792LM 3776 3764 3792 3747 3792LM 3776LM 61111, 3 3792LM 3776LM 3764 3747 3748 3792LM 3776LM 3762 3793 61111 3762LM 3798LM2 3755LM 3792LM 3750LM 3762 3792 3738 3750 3762LM 3792LM 3755LM 3750LM 3764 3747 3792 3792LM 3776LM 3792 3738 3764 3792LM 3755LM 3762LM 3750LM 61111, 3 3755LM 3792LM 3762LM 3750LM 3762 3792 61111 3755LM 3762LM 3792LM 3750LM 3762 3792 3738 3750 3762LM 3792LM 3755LM 3750LM 3764 3747 3792 3792LM 3776LM 3762 3792 3738 61111 3792LM 3762LM 3755LM 3750LM 61111, 3 3762LM 3792LM 3776LM 3750LM 3762 3750 3738 3792 3762LM 3792LM 3755LM 3750LM 3731 3764 3792 3747 3792LM 3776LM 3764 3792 3747 3792LM 3776LM 61111, 3 3792LM 3776LM 3764 3792 3747 3792LM 3776LM 3738 3747 61111 3776LM 3792LM 61111, 3 3762LM 3792LM 3755LM 3750LM 3738 3747 61111 3776LM 3792LM 61111, 3 3792LM 3762LM 3755LM 3750LM 61111 3792LM 3762LM 3755LM 3750LM 3738 3764 3747 61111 3792LM Note: This technical information and data should be considered representative or typical only and should not be used for specification purposes. 5 Low Melt Technology: Hot Melt Technology: Applied 350-385F (177-196C) Applied 250- 270F (127- 132C) Product Information Bulk Only Brown 6 Product (Color) FDA Listed1 UL 94 Listing Features Application Ideas 3750LM Tan N N/A * Excellent "hot tack", fast setting for corrugated, beadboard, repack, recoup * Economical, general purpose * Use with AE II LT applicator only 3755LM Clear Y N/A * "Delayed-tack" applied in thin-glue-line ribbon for paper, corrugated, chipboard, displays, exhibits * Use with low melt applicator only 3762LM* Lt. Amber Y N/A * Excellent "hot tack", fast setting for corrugated, beadboard, recouperage, repacking chipboard, wood * Economical, general purpose * Use with low melt applicator only 3776LM Tan N/A N/A * Bonds variety of plastics, woods and light-gauge metals * Use with low melt applicator only 3792LM* Clear Y V2 * Clear, multi-purpose for wood, coated paper, polyolefins and other heat-sensitive materials * P.O.P. displays * Use with low melt applicator only 3798LM* Lt. yellow Y N/A * Removable "gummy glue" for many substrates * Removes easily without residual tack * Use with low melt applicator only 3731* Tan N N/A * High heat resistance * Bonds plastics including polyethylene, polypropylene 3738* Tan Y V2 * High delivery rate and long bonding range * General purpose for foundry sand cores, wood bonding, corrugated, selected plastics and chipboard 3747 Tan Y N/A * General purpose for wide variety of plastics, wood and lightweight metals 3748* Off-white Y V2 * Good thermal shock resistance * Non-corrosive to copper for many electronic applications * Bonds polyolefins 3748 VO Light Yellow N VO * Self-extinguishing version of 3748 * Meets UL 1410 requirements 3750 Tan N N/A * Low viscosity for high flow rate, increased production * Good hot tack, quick grab for packaging and woodworking 3750 Clear N N * Low viscosity for high flow rate, increased production * Good hot tack, quick grab for packaging and woodworking 3762 Tan Y V2 * Excellent "hot tack", fast setting for corrugated, beadboard, recouperage, repacking chipboard, wood * Economical, general purpose 3764* Clear Y V2 * Bonds variety of plastics including polycarbonate, polyethylene, and polypropylene * Flexible at low temperatures 3779* Amber Y VO * High heat resistance * High strength * Good fuel and oil resistance * Electronics 3789* Brown Y V2 * High performance for plastics * Impact resistant * Bonds vinyl and wood * Good fuel and oil resistance 3792* Clear Y V2 * Clear, multi-purpose for wood, corrugated, fabric,furniture, upholstery, novelties, and other lightweight materials 3796 Lt. Tan N N/A * High performance for plastics and light-gauge metals 3797 Off-white Y V2 * High ball and ring * Low viscosity * Good for electrical potting 3794 Hi Tack PSA Lt. Tan Y N/A * Sprayable high tack PSA for bonding plastic, paper, metals, die-cut labels 6111 Tan N N/A * Sprayable 100% solventless adhesive for most foams, fabrics, plastics, particle board, and thin metal 6111 Green N N/A * Same as 6111 tan but green in color. 6111HT Tan N N/A * Similar to 6111 but has higher heat resistance. 6111HT Blue N N/A * Similar to 6111 but has higher heat resistance and blue in color. 6116 Off-White N N/A * Similar to 6111 but lower than normal viscosity and mainly used on fabrics. * Also available in bulk. (1) Made from components listed as indirect food additives under FDA regulations for adhesives (21 CFR 175.105). (2) Brookfield Thermosel Viscometer in Centipoise. (3) ASTM E-28-99 (4) Temperature at which adhesive fails (5) On canvas (6) On Douglas Fir (7) 1/8" semicircular bead, Douglas Fir to Douglas Fir. Delivery Time (sec) for 1'' x 3'' Cartridge Ball & Ring Melt Point 3 (F/C) Heat Resistance4 (F/C) Peel Strength PIW 5 72F (22C) Shear Strength PSI 6 72F (22C) Open Time 1/8'' Bead (sec) 7 4000 @250F 45 200/95 128/54 6 475 25 N/A 13,000 @250F N/A 157/70 120/49 13 500 120 Sizes EC Temp Control Modules Viscosity cps 2 1/2" x 12"AE N/A 58" x 2"TC 58" x 8"Q 1" x 3"PG 58" x 2"TC 1/2" x 12" 1 4000 @250F 45 205/96 130/54 6 480 25 58" x 8"Q 1" x 3"PG 1/2" x 12" 1 8250 @250F 47 184/84 140/60 9 600 40 58" x 8"Q 1" x 3"PG 58" x 2"TC 1/2" x 12" 1 10,500 @250F 57 178/81 140/60 13 350 40 58" x 2"TC N/A 9500 @250F N/A 191/88 120/49 N/A N/A 30 58" x 8"Q 1" x 3"PG 5 12,000 @375F N/A 315/157 265/130 22 490 30 58" x 8"Q 1" x 3"PG 58" x 2"TC 12" x 12"AE 4 2875 @375F 35 186/86 130/54 13 375 50 58" x 8"Q 1" x 3"PG 58" x 2"TC 12" x 12"AE 4 4100 @375F 45 220/104 145/63 20 430 45 58" x 8"Q 1" x 3"PG 58" x 2"TC 4 5000 @375F 65 292/144 175/79 18 250 45 58" x 8"Q 1" x 3"PG 58" x 2"TC 4 5500 @375F 65 305/152 175/79 15 275 30 1/2" x 12"AE N/A 1900 @375F 30-40 200/93 125/52 6 500 N/A 1/2" x 12"AE N/A 4800 @375F 35-45 178/81 135/57 12 250 N/A 58" x 8"Q 1" x 3"PG 58" x 2"TC 12" x 12"AE 3 1870 @375F 30 201/94 130/54 7 545 35 58" x 8"Q 1" x 3"PG 58" x 2"TC 12" x 12"AE 4 6000 @375F 55 190/88 140/60 14 390 40 58" x 8"Q 1" x 3"PG 58" x 2"TC 5 7000 @375F 75 325/163 300/149 18 700 25 5 5200 @375F 70 270/132 220/104 16 570 50 4 5000 @375F 45 179/81 140/60 13 250 50 1" x 3"PG 58" x 2"TC N/A 23,000 @375F 120 240/116 200/93 29 550 40 1" x 3"PG 58" x 2"TC N/A 2650 @375F 55 304/151 170/77 10 350 30 2 lb. bricks N/A 15,000 @325F N/A 224/107 120/49 16 N/A > 60 .75"x.75" chips N/A 3,000-5,000 @375F N/A 284/140 145/63 34 N/A 1 surface 60 2 surface 360 .75"x.75" chips N/A 3,000-5,000 @375F N/A 284/140 145/63 34 N/A 1 surface 60 2 surface 360 .75"x.75" chips N/A 2,500-4,500 @375F N/A 224/107 175/79 26 N/A 1 surface 180 2 surface 480 .75"x.75" chips N/A 2,500-4,500 @375F N/A 224/107 175/79 26 N/A 1 surface 180 2 surface 480 .75"x.75" chips N/A 1,300 @375F N/A 199/93 160/69 20 N/A 1 surface 120 2 surface 300 58" x 8"Q 1" x 3"PG 58" x 8"Q 1" x 3"PG 58" x 2"TC 12" x 12"AE N/A = Not available Note: The technical information and data on these pages should be considered representative or typical only and should not be used for specification purposes. 7 Selecting a 3MTM Scotch-WeldTM Hot-Melt Applicator to fit your needs C A B 26 28 3MTM Scotch-WeldTM Hot Melt Applicator LT. Medium volume using low melt adhesive. UPC# 021200-82245 27 3MTM Scotch-WeldTM Pneumatic Hot Melt Applicator PG II LT with Speedloader. High volume using low melt adhesive. UPC# 021200-89395 3MTM Scotch-WeldTM Hot Melt Applicator LT with QuadrackTM Converter. Medium volume using low melt adhesive. UPC# 021200-89447 F D E 29 31 3MTM Scotch-WeldTM Hot Melt Applicator AE II LT. Low volume using low melt adhesive. UPC# 051115-25567 3M Scotch-Weld Hot Melt Applicator TC with QuadrackTM Converter. Medium volume. UPC# 021200-89445 TM 30 TM 3M Scotch-Weld Hot Melt Applicator TC. Medium volume. UPC# 021200-82244 TM TM G I H 32 34 3M Scotch-Weld Pneumatic Hot Melt Applicator PG II with Speedloader. High volume. UPC# 021200-22033 TM TM 33 3M Scotch-Weld Hot Melt Applicator AE II. Low volume. UPC# 021200-96594 TM 8 3M Scotch-Weld Hot Melt Applicator EC. Medium volume; variable temperature control. UPC# 021200-89519 TM TM TM 35 Lightweight, easy-to-use units... 3M's innovative melt-on-demand or progressive feed technology. Variable Hot Melt Applicators Low Melt Applicators 3MTM Scotch-WeldTM Hot Melt Applicators Weight(1) Output(2) lb/hr Temperature(3) Power (120V) Adhesive dia. x length, inches Features Warranty (Months) For use with low melt adhesives 12 A LT 10.0 oz. 2.6 265F (129C) 150W 5/8 x 2 TC B LT with Quadrack Converter 13.8 oz. 2.6 265F (129C) 150W 5/8 x 8 Q C Pneumatic PG II LT with Speedloader 4.3 lbs. 6.0 265F (129C) 500W 1 x 3 PG Pneumatic high output for low melt adhesives 12 D AE II LT 20.0 oz. 4.0 265F (129C) 100W 1/2 x 12 AE All electric operation for low melt adhesives 6 E TC 10.0 oz. 3.5 385F (196C) 150W 5/8 x 2 TC Easy to use with standard melt adhesives 12 F TC with Quadrack Converter 13.8 oz. 3.5 385F (196C) 150W 5/8 x 8 Q G Pneumatic PG II with Speedloader 4.3 lbs. 7.5 385F (196C) 500W 1 x 3 PG Pneumatic high output for standard melt adhesives 12 H AE II 20.0 oz. 4.0 400F (204C) 100W 1/2 x 12 AE All electric operation for standard melt adhesives 6 H EC 24.0 oz. 5.5 260F-450F (127-232C) 350W 5/8 x 8 Q Temperature modules to operate with standard and low melt adhesives 12 12 (1) Weight shown is for applicator only -- does not include adhesive capacity. (2) Adhesive output will vary with conditions and the adhesive used. Values are approximate and are based on maximum steady-state flow. (3) Temperatures shown are nominal control values. Actual temperature will range slightly above and below this value. Note: The technical information and data on these pages should be considered representative or typical only and should not be used for specification purposes. Accessories to improve your productivity 36 9726 9764 9782 9777 9727 9916 9913 9917 Tip No. 9726 9764 9777 9782 9727 9916 9913 9917 9929 9946 9785 9725 9922 9940 9921 Description "T" Tip (shown with valve and adapter) for all 3MTM Applicators 3/4" Slotted Spreader (3755LM adhesive only) 1/4" Slotted Spreader (3755LM adhesive only) 1/2" Slotted Spreader (3755LM adhesive only) "L" Tip (shown with adapter and valve) for all 3MTM Applicators 3 Hole Spreader 2 Hole Spreader (1/4" hole span) 3 Hole 1" Spreader for 3MTM Applicator II only High Viscosity Valve (TC, EC, PG-II) .072" Brass Extension for 3MTM Applicators PG II and PG II LT only .070" Tapered Aluminum Extension for all 3MTM Applicators Mini Extension Tip .072" Opening for all 3MTM Applicators .063" Fluted Tip .125" Fluted Tip .090" Fluted Tip 40 41 Heavy-Duty Benchstands provide added convenience. Foot pedal, magazine feeder, and benchmount accessories can provide high capacity, hands-free operation for 3MTM Scotch-WeldTM PG II and 3MTM Scotch-WeldTM PG II LT. Increase loading capacity and ease of operation with Quadrack Converter and Palm Trigger. Magazine Feeder 37 9929 9946 9785 9725 9922 9940 9921 38 A general purpose tip (.090) is supplied with each 3MTM Scotch-WeldTM Applicator. To increase productivity, optional tips can provide multiple beads, flat ribbons, guided beads for carton sealing, and extended reach. 42 Bench nozzle assembly 39 Foot Pedal Benchmount 43 9 Ordering Information Low Melt Technology: Hot Melt Technology: Applied 350-385F (177-196C) Applied 250- 270F (127- 132C) 3MTM Scotch-WeldTM Hot Melt Adhesives Product Color Size Container Size UPC SN 3750LM 3755LM 3762LM 3762LM 3762LM 3762LM 3762LMB 3762LMB* 3776LM* 3776LM 3776LM 3792LM 3792LM 3792LM 3792LM 3792LMB 3792LMB 3798LM 3798LMB* 3731 3731* 3731 3738 3738 3738 3738 3738B 3738B* 3747 3747 3747 3747 3748 3748 3748 3748B 3748 3748VO* 3748VO* 3748VO 3750 3750 3762 3762 3762 3762 3764 3764 3764 3764 3764B 3764B 3779 3779 3779 3779B* 3789 3789 3789* 3792 3792 Tan Clear Lt. Amber Lt. Amber Lt. Amber Lt. Amber Lt. Amber Lt. Amber Tan Tan Tan Clear Clear Clear Clear Clear Clear Lt. yellow Lt. yellow Tan Tan Off-White Tan Tan Tan Tan Tan Tan Tan Tan Tan Tan Off-White Off-White Off-White Off-White Black Lt. Yellow Lt. Yellow Lt. Yellow Tan Clear Tan Tan Tan Tan Clear Clear Clear Clear Clear Clear Amber Amber Amber Amber Brown Brown Brown Clear Clear 1/2"x12" AE 5/8" x 2" TC 1" x 3" PG 1/2" x 12" AE 5/8" x 2" TC 5/8" x 8" Q Pellets Pellets 1" x 3" PG 1/2" x 12" AE 5/8" x 8" Q 1" x 3" PG 1/2" x 12" AE 5/8" x 2" TC 5/8" x 8" Q Pellets Pellets 5/8" x 2" TC Chips 5/8" x 2" TC 1" x 3" PG Chips 1" x 3" PG 1/2" x 12" AE 5/8" x 2" TC 5/8" x 8" Q Pellets Pellets 1" x 3" PG 1/2" x 12" AE 5/8" x 2" TC 5/8" x 8" Q 1" x 3" PG 5/8" x 2" TC 5/8" x 8" Q Chips 5/8" x 8" Q 1" x 3" PG 5/8" x 2" TC 5/8" x 8" Q 1/2" x 12" AE 1/2" x 12" AE 1" x 3" PG 1/2" x 12" AE 5/8" x 2" TC 5/8" x 8" Q 1" x 3" PG 1/2" x 12" AE 5/8" x 2" TC 5/8" x 8" Q Pellets Pellets 1" x 3" PG 5/8" x 2" TC 5/8" x 8" Q Pellets 1" x 3" PG 5/8" x 8" Q Pellets 1" x 3" PG 1/2" x 12" AE 11 lbs 11 lbs 22 lbs 11 lbs 11 lbs 11 lbs 22 lbs 950 lbs 22 lbs 11 lbs 11 lbs 22 lbs 11 lbs 11 lbs 11 lbs 22 lbs 950 lbs 11 lbs 11 lbs 11 lbs 22 lbs 22 lbs 22 lbs 11 lbs 11 lbs 11 lbs 22 lbs 950 lbs 22 lbs 11 lbs 11 lbs 11 lbs 22 lbs 11 lbs 11 lbs 22 lbs 11 lbs 22 lbs 11 lbs 11 lbs 11 lbs 11 lbs 22 lbs 11 lbs 11 lbs 11 lbs 22 lbs 11 lbs 11 lbs 11 lbs 22 lbs 950 lbs 22 lbs 11 lbs 11 lbs 22 lbs 22 lbs 11 lbs 22 lbs 22 lbs 11 lbs 051115-31933 021200-83535 021200-49128 051115-25579 021200-49134 021200-49125 021200-49130 021200-49133 021200-89501 021200-25583 021200-89499 021200-83491 021200-25580 021200-82456 021200-82454 021200-43778 021200-49098 021200-41604 021200-43825 021200-45271 021200-49139 021200-49140 021200-82609 021200-82594 021200-82610 021200-65262 021200-89305 021200-49094 021200-82221 021200-82220 021200-82560 021200-82561 021200-82585 021200-82584 021200-76374 021200-43752 021200-45242 021200-85797 021200-85816 021200-85795 021200-96269 021200-97353 021200-82614 021200-82596 021200-82615 021200-65261 021200-82598 021200-82597 021200-82599 021200-76054 021200-87850 021200-41526 021200-82602 021200-82603 021200-85799 021200-89307 021200-82371 021200-82369 021200-89308 021200-82606 021200-82583 62-3758-9531-5 62-3755-9830-7 62-3720-9330-2 62-3720-9531-5 62-3720-9830-1 62-3720-9132-2 62-3720-9335-1 62-3720-9339-3 62-3733-9330-5 62-3733-9531-8 62-3733-9132-5 62-3760-9330-8 62-3760-9531-1 62-3760-9830-7 62-3760-9132-8 62-3760-9335-7 62-3760-9339-9 62-3798-9830-7 62-3798-9335-7 62-3731-9132-9 62-3731-9330-9 62-3731-9335-8 62-3738-9330-4 62-3738-9531-7 62-3738-9830-3 62-3738-9132-4 62-3738-9335-3 62-3738-9339-5 62-3747-9330-5 62-3747-9531-8 62-3747-9830-4 62-3747-9132-5 62-3748-9330-3 62-3748-9830-2 62-3748-9132-3 62-3748-9335-2 62-3724-9132-4 62-3768-9330-1 62-3768-9830-0 62-3768-9132-1 62-3750-9531-2 62-3757-9531-7 62-3762-9330-4 62-3762-9531-7 62-3762-9830-3 62-3762-9132-4 62-3764-9330-0 62-3764-9531-3 62-3764-9830-9 62-3764-9132-0 62-3764-9335-9 62-3764-9337-5 62-3779 9330-8 62-3779-9830-7 62-3779-9132-8 62-3779-9335-7 62-3789-9330-7 62-3789-9132-7 62-3789-9335-6 62-3792-9330-1 62-3792-9531-4 *Non-stocked items 10 350-385F (177-196C) Bulk Hot Melt Technology: Applied 3MTM Scotch-WeldTM Hot Melt Adhesives (continued) Product Color Size Container Size UPC SN 3792 3792 3792B* 3792B 3794 3796 3796 3797 3797 Clear Clear Clear Clear Clear Lt. Tan Lt. Tan Off-White Off-White 5/8" x 2" TC 5/8" x 8" Q Pellets Pellets 2 lb Loaf 1" x 3" PG 5/8" x 2" TC 1" x 3" PG 5/8" x 2" TC 11 lbs 11 lbs 22 lbs 950 lbs 34 lbs 22 lbs 11 lbs 22 lbs 11 lbs 021200-82589 021200-65263 021200-87960 021200-49097 021200-43830 021200-25352 021200-25353 021200-82592 021200-82593 62-3792-9830-0 62-3792-9132-1 62-3792-9335-0 62-3792-9339-2 62-3794-6630-3 62-3761-9330-6 62-3731-9830-5 62-3797-9330-0 62-3797-9830-9 6111B 6111B 6111HTB 6111HTB 6111HTB 6111HTB* 6116 Green Tan Tan Tan Blue Blue Off-White Chips Chips Chips Chips Chips Chips Chips 22 lbs 22 lbs 22 lbs 850 lbs 22 lbs 850 lbs 22 lbs 021200-96590 021200-96589 021200-43779 021200-56567 021200-49935 021200-56568 021200-49924 62-6112-9335-8 62-6111-9335-0 62-6113-9335-6 62-6113-9339-8 62-6115-9335-1 62-6115-9339-3 62-6116-9335-9 *Non-stocked items 3MTM Scotch-WeldTM Hot Melt Accessories 3MTM Scotch-WeldTM Hot Melt Applicators Product UPC SN Product Description UPC SN LT LT with Quadrack Converter and Palm Trigger Pneumatic PG II LT with Speedloader and Cartridge Feed Pneumatic PG II LT with Speedloader and Magazine Feed AE II LT TC TC with Quadrack Converter and Palm Trigger Pneumatic PG II with Speedloader and Cartridge Feed includes bench stand and tips 9921 and 9946 Pneumatic PG II Refurbished with Speedloader and Cartridge Feed* Pneumatic PG II with Speedloader and Magazine Feed includes bench stand and tips 9921 and 9946 Pneumatic PG II Refurbished with Speedloader and Magazine Feed AEII EC 021200-82245 62-9281-9930-6 9726 9764 021200-64542 62-9726-9930-0 021200-89447 62-9281-9950-4 "T" Tip Assembly 3/4" Slotted Spreader for use w/3755LM adhesive 1/4" Slotted Spreader for use w/3755LM adhesive 1/2" Slotted Spreader for use w/3755LM adhesive "L" Tip with Adapter 3 Hole Spreader 2 Hole Spreader 3 hole 1" Spreader High Viscosity Valve (TC, EC, PG II) .072" Brass Extension (PG II, PG II LT) .070" Tapered Aluminum Extension (all applicators) .072" Mini Extension Tip .063" Fluted Tip .125" Fluted Tip .090" Fluted Tip 021200-83526 62-9764-9930-1 021200-83732 62-9777-9930-3 021200-83529 021200-64543 021200-21836 021200-21830 021200-21837 62-9782-9930-3 62-9727-9930-8 62-9916-9930-7 62-9913-9930-4 62-9917-9930-5 021200-64840 62-9729-9930-4 021200-22040 62-9946-6980-2 021200-82554 021200-21786 021200-21841 021200-22036 021200-21840 62-9785-9930-6 62-9725-9930-2 62-9922-0066-7 62-9940-6920-1 62-9921-0066-9 - 021200-22039 62-9945-9930-6 - 021200-82418 021200-82277 62-9945-9935-5 62-9276-9930-6 - - - 021200-21713 021200-82278 021200-82701 62-9233-2781-1 62-9277-9930-4 62-9761-9930-7 - 021200-83536 62-9275-9935-7 9777 021200-89395 62-9783-9630-7 9782 021200-89396 051115-25567 021200-82244 021200-89445 62-9783-9830-3 62-9799-9930-7 62-9990-9935-1 62-9990-9950-0 021200-22033 62-9938-9630-7 9946 021200-64787 62-9949-9931-6 9785 021200-22034 62-9938-9830-3 021200-64788 021200-96594 021200-89519 62-9949-9932-4 62-9796-9930-3 62-9680-9930-9 *Non-stocked items 44 9727 9916 9913 9917 9729 9725 9922 9940 9921 Heavy Duty Bench Stand for use with PG II & PG II LT Heavy Duty bench Stand for use with EC, TC, & LT Bench Mount Bench Nozzle Assembly Foot Pedal Assembly TC & LT Palm Trigger TC Quadrack Converter 45 11 Other 3M TM Adhesive Technologies for improved design, productivity, and performance 3M TM Scotch-WeldTM Structural Adhesives for the permanent bonding power of epoxies, urethanes, acrylics, and cyanoacrylates. 3M TM Scotch-GripTM Rubber and Plastic Adhesives for handy tubes of bonding power. 49 46 3M TM Scotch-WeldTM Polyurethane Reactive (PUR) Adhesive Systems for structural adhesive benefits with hot melt speed. 3M TM Industrial Aerosol Adhesives for a fistful of bonding power with a wide variety of materials. 47 3M TM Scotch-WeldTM Cylinder Spray Adhesives for bulk productivity with aerosol convenience and portability. 50 3M TM FastbondTM Water-based Adhesives for productivity, performance, profitability, and compliance. 51 48 Limited Product Warranty: 3M warrants all 3MTM Scotch-WeldTM Hot Melt Applicators for 6 months from the date of manufacture, that the 3M product will be free of defects in material and manufacture. 3M MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. This warranty does not cover damage resulting from the use or inability to use the 3M product due to misuse, workmanship in application, or application or storage not in accordance with 3M recommended procedures. Important Notice: User is responsible for determining whether the 3M product is fit for a particular purpose and suitable for user's method of application. Please remember that many factors can affect the use and performance of a 3M product in a particular application. The materials to be bonded with the product, the surface preparation of these materials, the product selected for use, the conditions in which the product is used, and the time and environmental conditions in which the product is expected to perform are among the many factors that can affect the use and performance of a 3M product. Given the variety of factors that can affect the use and performance of a 3M product, some of which are uniquely within the user's knowledge and control, it is essential that the user evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for the user's method of application. Limitation of Remedies and Liability: If the 3M product is proved to be defective within the warranty period stated above, THE EXCLUSIVE REMEDY, AT 3M'S OPTION, SHALL BE TO REFUND THE PURCHASE PRICE OF OR TO REPAIR OR REPLACE THE DEFECTIVE 3M PRODUCT. 3M shall not otherwise be liable for loss or damages, whether direct, indirect, special, incidental, or consequential,regardless of the legal theory asserted, including negligence, warranty, or strict liability. Industrial Adhesives and Tapes Division 3M, Fastbond, Scotch-Grip, and Scotch-Weld are trademarks of 3M Company. 900 Bush Avenue, Building 21-1W-10 St. Paul, MN 55144-1000 www.3M.com/adhesives Printed in U.S.A. (c) 3M 2008 78-6900-2947-1 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: 3M: 3748-V-O-Q-5/8"x8" Polygun-TCw/Convertor 3797PG 3779TC Polygun-EC POLYGUN-TC W/.09"TIP 3748TC