3
Speed and versatility
for applications success
3M™Scotch-Weld™ Hot Melt Bonding Systems
&packaging
Assembly
Reference guide
1
3
2
4
• Easily secure wires to resist strain and breakage
• Rigidize components on printed circuit boards to add
stability during assembly, shipping and end use
• Quick setting for potting even at great depth
• Terminate coils
• Cable strain relief
• Bundle wires for convenient handling
Go to
adhesives
Alternatives
3748VO: Light yellow, non-corrosive to
copper, self extinguishing
3779: Amber, high heat resistance,
high strength
3748: Off-white, non-corrosive to
copper
3764: Clear, bonds HSE/LSE plastics
3797: Off-white, good for potting
Application Success:
Electronics
and Electrical
Do 3M™Scotch-Weld™Hot Melt Adhesives offer the best options
for success with your assembly and/or closure application?
Answers to the following questions can help you decide.
Would you like to improve your production speed and ease?
3M™Scotch-Weld™Hot Melt Adhesives liquefy when heated
and quickly fill gaps and wet the bonding surface. Applied to only
one surface, they cool, harden, and reach bond strength in
seconds. You can move assemblies immediately and eliminate
clamps, fixturing, and drying time and energy. Each adhesive
is engineered for efficient application with an easy-to-use 3M
portable applicator. Minimal operator training.
Would you like to improve appearance?
Unlike mechanical fasteners and sealing tapes, hot melt
adhesive is virtually invisible between the mating surfaces.
What surfaces do you want to combine?
As you can see on pages 4 and 5, you can combine a wide variety
of materials ranging from wood to corrugated cardboard, and
even heat-sensitive foam.
How much strength do you need?
Select from a wide range of non-structural shear and peel
strengths as shown on page 7. Structural strength has been
defined as a minimum of 1,000 psi in overlap shear to
permanently bond load-bearing components. Hot melt
non-structural applications range from case sealing to bonding
wood stiffeners to drawer bottoms, and securing components
on a PC board.
What is the temperature in the end use environment?
Hot melts are 100% solids thermoplastic resins that can
re-melt after bonding if exposed to high enough temperature.
As you can see on page 7, there are many options for selecting
melt point and heat resistance for your specific application.
Do you need to reposition parts or delay assembly after
adhesive application?
Open time or bonding range is the maximum time between
applying adhesive and joining the surfaces. The more quickly
you join surfaces, the better the wetting action and bond. With
3M™Scotch-Weld™Hot Melt Adhesives you have wide latitude
in bonding range selection as shown on page 7.
Applications Success with 3M™
Scotch-Weld™ Hot Melt Adhesives
5
6
78
2
• Bond and seal any size and configuration of corrugated
carton quickly and invisibly including RSCs, FOLs, and
5-panel folded
• Securely bond lightly waxed surfaces that may be
difficult for tape to seal
• Attach inserts including heat-sensitive foam
• Self-contained portable applicator saves the cost of bulk
equipment for recouperage, manual random size case
sealing, and many contract packaging situations
Go to
adhesives
Alternatives
3762: Economical, tan, fast-setting
with “hot tack”
3762LM: Light amber, low melt version
of 3762
3738: Tan with high delivery rate,
longer open time than 3762
3750: Tan, low viscosity for high flow
3764: Clear, stays flexible at low temp
• Bond foam spacers into 3-dimensional corrugated
cardboard POP display
• Attach samples of wood flooring, laminates, foams, fabric,
or other materials and small products to display board
• Attach decorations to baskets
• Assemble dried floral arrangements
• Bond polystyrene foam and other materials used in
counter top displays, jewelry cases, and exhibitor booths
Go to
adhesives
Alternatives
3762LM: Light amber, fast-setting, low
melt for heat sensitive surfaces
3792LM: Clear, multi-purpose low melt
for heat sensitive surfaces
3748: Off-white, bonds polyolefins
3755LM: Clear, delayed tack, applied as
ribbon for paper, corrugated
3764: Clear, bonds HSE/LSE plastics
Application Success:Application Success:
Adhesive
Point-of-Purchase,
Displays, Trade Exhibits
Manual and Corrugated
Carton Sealing
9
10 11
13
12
14
15
16
17
3
• Wood to wood assembly of non-structural components in
home and office furniture and cabinetry
• “Third-hand” holding components while structural wood
adhesive cures
• Bond fabric to wood for welting and gimping
• Secure drawer bottoms, guides, and stiffeners
• Attach upholstery to wood and plastic
• Assemble decorative crown moldings
Go to
adhesives
Alternatives
3792: Clear, multi-purpose for wood,
fabric, and upholstery
3792LM: Low melt version of 3792 for
heat sensitive surfaces
3738: Tan, high delivery rate
3747: Tan, bonds variety of wood,
plastics, and lightweight metal
3789: Brown, impact resistant
• Bond metal or plastic nameplates to trophies
• Assemble or repair foundry sand cores
• Attach removable credit cards or samples to mailers
• Quick easy assembly of many materials in luggage and
carrying cases
• Assemble many materials used in novelties, toys, games,
and costumes
• Attach speaker fabric or protective metal grille
Go to
adhesives
Alternatives
3764: Clear, bonds HSE/LSE plastics,
flexible at low temp
3792LM: Clear, multi-purpose low melt
for heat sensitive surfaces
3748: Off-white, resists thermal
shock, bonds polyolefins
3796: Tan, hi-performance on thin metal
3798LM: Clear removable “gummy glue”
Furniture and
Woodworking
Application Success:
Product
Assembly
Application Success:
18
19
20
21
22
25
23
24
4
Substrate Combinations
for Applications Success
Low melt adhesives * E.g., polyethylene
** E.g., ABS, PVC, acrylic
*** Beadboard/styrene
Substrate Wood Thin Metal Glass or Vinyl Leather Polyolefin*
ceramic
Wood 3747 3776LM 3747 3776LM 3747 3792LM 3789 N/R 3789 N/R 3731 3792LM
3789 3762LM 3796 3764 3779 3779 3748
3738 3792LM 3796 3796 3796 3764
3750LM 61111
Thin Metal 3747 3776LM 3747 3776LM 3796 N/R 3796 N/R 3796 N/R
3796 3796
Glass or 3747 3792LM 3796 N/R 3796 N/R 3764 3792LM
ceramic 3764 3748
3796
Vinyl 3789 N/R 3789 N/R 3796 N/R
3779 3779
3796 3796
Leather 3789 N/R 3796 N/R
3779
3796
Polyolefin* 3731 3792LM
3748
3764
61111
Plastic**
Paper
Uncoated
cardboard/
chipboard
Coated
cardboard/
chipboard
Fabric
Rigid
foam***
Flexible
foam
16111 is a family of products that includes 6111, 6111HT, and 6116.
2Removable
3Must be sprayed on rigid foam to prevent cavitation.
5
Plastic** Paper Uncoated Coated Fabric Rigid foam*** Flexible foam
cardboard/ cardboard/
chipboard chipboard
3764 3792LM 3762 3762LM 3762 3762LM 3764 3792LM 3738 3776LM 61111, 3 3792LM 3738 3792LM
3747 3776LM 3792 3755LM 3792 3792LM 3792 3776LM 3747 3792LM 3762LM 3764
3748 611113792LM 3738 3755LM 3747 611113755LM 3747
3750LM 3750 3750LM 61111
3747 3776LM 3747 3776LM 3747 3776LM 3747 3776LM 3747 3776LM N/R 3776LM 3747 3776LM
3796 3796 3796 3796 3796 3796
3764 3792LM 3747 3792LM 3747 3792LM 3764 3792LM 3747 3792LM N/R 3792LM 3747 3792LM
3747 3764 3764 3747 3764 3764
3792 3796 3796 3796 3796
3789 N/R 3789 N/R 3789 N/R 3789 N/R 3789 N/R N/R N/R 3789 N/R
3796 3779 3779 3779 3779 3779
3779 3796 3796 3796 3796 3796
3789 N/R 3789 N/R 3789 N/R 3789 N/R 3789 N/R N/R N/R 3789 N/R
3779 3779 3779 3779 3779 3779
3796 3796 3796 3796 3796 3796
3731 3792LM 3731 3792LM 3764 3792LM 3731 3792LM 3731 3792LM 61111, 3 3792LM 3731 3792LM
3764 3764 3748 3764 3764 3748
3748 3748 611113748 3748 3764
6111161111611116111161111
3731 3792LM 3764 3792LM 3764 3792LM 3764 3792LM 3764 3792LM 61111, 3 3792LM 3764 3792LM
3764 3776LM 3747 3776LM 3747 3776LM 3747 3776 3792 3776LM 3776LM 3747 3776LM
3747 3748 3748 3748 3747 3748
3748 61111
3762 3762LM 3762 3762LM 3764 3792LM 3792 3792LM 61111, 3 3755LM 3762 3755LM
3793 3798LM23792 3792LM 3747 3776LM 3738 3755LM 3792LM 3792 3762LM
611113755LM 3738 3755LM 3792 3764 3762LM 3762LM 611113792LM
3792LM 3750 3750LM 3750LM 3750LM 3750LM
3750LM
3762 3762LM 3764 3792LM 3762 3792LM 61111, 3 3762LM 3762 3762LM
3792 3792LM 3747 3776LM 3792 3762LM 3792LM 3750 3792LM
3738 3755LM 3792 3738 3755LM 3776LM 3738 3755LM
3750 3750LM 611113750LM 3750LM 3792 3750LM
3731 3792LM 3764 3792LM 61111, 3 3792LM 3764 3792LM
3764 3776LM 3792 3776LM 3776LM 3792 3776LM
3792 3747 3747
3747
3738 3776LM 61111, 3 3762LM 3738 3776LM
3747 3792LM 3792LM 3747 3792LM
611113755LM 61111
3750LM
61111, 3 3792LM 611113792LM
3762LM 3762LM
3755LM 3755LM
3750LM 3750LM
3738 3792LM
3764
3747
61111
Note: This technical information and data should be considered representative or typical only and should not be used for specification purposes.
6
Product FDA UL 94 Features
(Color) Listed1Listing Application Ideas
3750LM N N/A • Excellent “hot tack”, fast setting for corrugated, beadboard, repack, recoup
Tan • Economical, general purpose • Use with AE II LT applicator only
3755LM Y N/A • “Delayed-tack” applied in thin-glue-line ribbon for paper, corrugated, chipboard, displays, exhibits
Clear • Use with low melt applicator only
3762LM* Y N/A • Excellent “hot tack”, fast setting for corrugated, beadboard, recouperage, repacking chipboard, wood
Lt. Amber • Economical, general purpose • Use with low melt applicator only
3776LM N/A N/A • Bonds variety of plastics, woods and light-gauge metals
Tan • Use with low melt applicator only
3792LM* Y V2 • Clear, multi-purpose for wood, coated paper, polyolefins and other heat-sensitive materials
Clear • P.O.P. displays • Use with low melt applicator only
3798LM* Y N/A • Removable "gummy glue" for many substrates
Lt. yellow • Removes easily without residual tack • Use with low melt applicator only
3731* N N/A • High heat resistance
Tan • Bonds plastics including polyethylene, polypropylene
3738* Y V2 • High delivery rate and long bonding range • General purpose for foundry sand cores, wood bonding,
Tan corrugated, selected plastics and chipboard
3747 Y N/A • General purpose for wide variety of plastics, wood and lightweight metals
Tan
3748* Y V2 • Good thermal shock resistance • Non-corrosive to copper for many electronic applications
Off-white • Bonds polyolefins
3748 VO N VO • Self-extinguishing version of 3748
Light Yellow • Meets UL 1410 requirements
3750 N N/A • Low viscosity for high flow rate, increased production
Tan • Good hot tack, quick grab for packaging and woodworking
3750 N N • Low viscosity for high flow rate, increased production
Clear • Good hot tack, quick grab for packaging and woodworking
3762 Y V2 • Excellent “hot tack”, fast setting for corrugated, beadboard, recouperage, repacking chipboard, wood
Tan • Economical, general purpose
3764* Y V2 • Bonds variety of plastics including polycarbonate, polyethylene, and polypropylene
Clear • Flexible at low temperatures
3779* Y VO • High heat resistance • High strength
Amber • Good fuel and oil resistance • Electronics
3789* Y V2 • High performance for plastics • Impact resistant
Brown Brown • Bonds vinyl and wood • Good fuel and oil resistance
3792* Y V2 • Clear, multi-purpose for wood, corrugated, fabric,furniture, upholstery, novelties,
Clear and other lightweight materials
3796 N N/A • High performance for plastics and light-gauge metals
Lt. Tan
3797 Y V2 • High ball and ring • Low viscosity
Off-white • Good for electrical potting
3794 Hi Tack PSA Y N/A • Sprayable high tack PSA for bonding plastic, paper, metals, die-cut labels
Lt. Tan
6111 N N/A • Sprayable 100% solventless adhesive for most foams, fabrics, plastics, particle board,
Tan and thin metal
6111 NN/A• Same as 6111 tan but green in color.
Green
6111HT NN/A• Similar to 6111 but has higher heat resistance.
Tan
6111HT NN/A• Similar to 6111 but has higher heat resistance and blue in color.
Blue
6116 N N/A • Similar to 6111 but lower than normal viscosity and mainly used on fabrics.
Off-White
* Also available in bulk. (1) Made from components listed as indirect food additives under FDA regulations for adhesives (21 CFR 175.105).
(2) Brookfield Thermosel Viscometer in Centipoise.
(3) ASTM E-28-99 (4) Temperature at which adhesive fails (5) On canvas (6) On Douglas Fir (7) 1/8" semicircular bead, Douglas Fir to Douglas Fir.
Product
Information
Hot Melt Technology: Applied 350°–385°F (177°–196°C)
Bulk Only Low Melt Technology:
Applied 250°–270°F (127°–132°C)
7
Delivery Peel Shear Open
EC Temp Time (sec) Ball & Ring Heat Strength Strength Time
Control Viscosity for 1'' x 3'' Melt Point3Resistance4PIW 5PSI61/8'' Bead
Sizes Modules cps2Cartridge (°F/°C) (°F/°C) 72°F (22°C) 72°F (22°C) (sec)7
1/2" x 12"AE N/A 4000 45 200/95 128/54 6 475 25
@250°F
5⁄8" x 2"TC N/A 13,000 N/A 157/70 120/49 13 500 120
@250°F
5⁄8" x 8"Q 5⁄8" x 2"TC 1 4000 45 205/96 130/54 6 480 25
1" x 3"PG 1/2" x 12" @250°F
5⁄8" x 8"Q 1/2" x 12" 1 8250 47 184/84 140/60 9 600 40
1" x 3"PG @250°F
5⁄8" x 8"Q 5⁄8" x 2"TC 1 10,500 57 178/81 140/60 13 350 40
1" x 3"PG 1/2" x 12" @250°F
5⁄8" x 2"TC N/A 9500 N/A 191/88 120/49 N/A N/A 30
@250°F
5⁄8" x 8"Q 5 12,000 N/A 315/157 265/130 22 490 30
1" x 3"PG @375°F
5⁄8" x 8"Q 5⁄8" x 2"TC 4 2875 35 186/86 130/54 13 375 50
1" x 3"PG 1⁄2" x 12"AE @375°F
5⁄8" x 8"Q 5⁄8" x 2"TC 4 4100 45 220/104 145/63 20 430 45
1" x 3"PG 1⁄2" x 12"AE @375°F
5⁄8" x 8"Q 5⁄8" x 2"TC 4 5000 65 292/144 175/79 18 250 45
1" x 3"PG @375°F
5⁄8" x 8"Q 5⁄8" x 2"TC 4 5500 65 305/152 175/79 15 275 30
1" x 3"PG @375°F
1/2" x 12"AE N/A 1900 30-40 200/93 125/52 6 500 N/A
@375°F
1/2" x 12"AE N/A 4800 35-45 178/81 135/57 12 250 N/A
@375°F
5⁄8" x 8"Q 5⁄8" x 2"TC 3 1870 30 201/94 130/54 7 545 35
1" x 3"PG 1⁄2" x 12"AE @375°F
5⁄8" x 8"Q 5⁄8" x 2"TC 4 6000 55 190/88 140/60 14 390 40
1" x 3"PG 1⁄2" x 12"AE @375°F
5⁄8" x 8"Q 5⁄8" x 2"TC 5 7000 75 325/163 300/149 18 700 25
1" x 3"PG @375°F
5⁄8" x 8"Q 5 5200 70 270/132 220/104 16 570 50
1" x 3"PG @375°F
5⁄8" x 8"Q 5⁄8" x 2"TC 4 5000 45 179/81 140/60 13 250 50
1" x 3"PG 1⁄2" x 12"AE @375°F
1" x 3"PG N/A 23,000 120 240/116 200/93 29 550 40
5⁄8" x 2"TC @375°F
1" x 3"PG N/A 2650 55 304/151 170/77 10 350 30
5⁄8" x 2"TC @375°F
2 lb. bricks N/A 15,000 N/A 224/107 120/49 16 N/A > 60
@325°F
.75"x.75" chips N/A 3,000-5,000 N/A 284/140 145/63 34 N/A 1 surface 60
@375°F 2 surface 360
.75"x.75" chips N/A 3,000-5,000 N/A 284/140 145/63 34 N/A 1 surface 60
@375°F 2 surface 360
.75"x.75" chips N/A 2,500-4,500 N/A 224/107 175/79 26 N/A 1 surface 180
@375°F 2 surface 480
.75"x.75" chips N/A 2,500-4,500 N/A 224/107 175/79 26 N/A 1 surface 180
@375°F 2 surface 480
.75"x.75" chips N/A 1,300 N/A 199/93 160/69 20 N/A 1 surface 120
@375°F 2 surface 300
N/A = Not available
Note: The technical information and data on these pages should be considered representative or typical only and should not be used for specification purposes.
8
Selecting a 3M™ Scotch-Weld™ Hot-Melt Applicator to fit your needs
3M™Scotch-Weld™Hot Melt Applicator LT.
Medium volume using low melt adhesive.
UPC# 021200-82245
3M™Scotch-Weld™Hot Melt Applicator TC.
Medium volume.
UPC# 021200-82244
3M™Scotch-Weld™Hot Melt Applicator TC
with Quadrack™Converter. Medium volume.
UPC# 021200-89445
3M™Scotch-Weld™Hot Melt Applicator AE II.
Low volume.
UPC# 021200-96594
3M™Scotch-Weld™
Hot Melt Applicator
EC. Medium
volume; variable
temperature control.
UPC# 021200-89519
3M™Scotch-Weld™Pneumatic Hot Melt
Applicator PG II LT with Speedloader. High volume
using low melt adhesive.
UPC# 021200-89395
3M™Scotch-Weld™Pneumatic Hot Melt
Applicator PG II with Speedloader.
High volume.
UPC# 021200-22033
AC
B
E
G
F
H
I
3M™Scotch-Weld™Hot Melt Applicator LT
with Quadrack™Converter. Medium volume using
low melt adhesive.
UPC# 021200-89447
3M™Scotch-Weld™Hot Melt Applicator AE II LT.
Low volume using low melt adhesive.
UPC# 051115-25567
D
26
27
28
29
30
31
32
33
34
35
9726
9764
9777
9782
9916 9913 9917
9727
9929 9946 9785 9725 9922 9940 9921
9
Lightweight, easy-to-use units... 3M’s innovative melt-on-demand or progressive feed technology.
Note: The technical information and data on these pages should be considered representative or typical only and should not be used for specification purposes.
(1) Weight shown is for applicator only — does not include adhesive capacity. (2) Adhesive output will vary with conditions and the adhesive used. Values are approximate and are based on maximum steady-state flow.
(3) Temperatures shown are nominal control values. Actual temperature will range slightly above and below this value.
A
G
B
C
H
D
E
F
3M™ Scotch-Weld™ Weight(1) Output(2) Temperature(3) Power Adhesive Features Warranty
Hot Melt Applicators lb/hr (120V) dia. x length, (Months)
inches
LT 10.0 oz. 2.6 265°F (129°C) 150W 5/8 x 2 TC For use with 12
low melt adhesives
LT with Quadrack 13.8 oz. 2.6 265°F (129°C) 150W 5/8 x 8 Q
Converter
Pneumatic PG II LT 4.3 lbs. 6.0 265°F (129°C) 500W 1 x 3 PG Pneumatic high output 12
with Speedloader for low melt adhesives
AE II LT 20.0 oz. 4.0 265°F (129°C) 100W 1/2 x 12 AE All electric operation for 6
low melt adhesives
TC 10.0 oz. 3.5 385°F (196°C) 150W 5/8 x 2 TC Easy to use with 12
standard melt adhesives
TC with Quadrack 13.8 oz. 3.5 385°F (196°C) 150W 5/8 x 8 Q 12
Converter
Pneumatic PG II 4.3 lbs. 7.5 385°F (196°C) 500W 1 x 3 PG Pneumatic high output for 12
with Speedloader standard melt adhesives
AE II 20.0 oz. 4.0 400°F (204°C) 100W 1/2 x 12 AE All electric operation 6
for standard melt adhesives
EC 24.0 oz. 5.5 260°F-450°F 350W 5/8 x 8 Q Temperature modules to 12
(127°-232°C) operate with standard
and low melt adhesives
H
Accessories to improve your productivity
Increase loading capacity and
ease of operation with Quadrack
Converter and Palm Trigger.
Heavy-Duty Benchstands
provide added convenience.
Foot pedal, magazine feeder, and
benchmount accessories can provide
high capacity, hands-free operation for
3M™Scotch-Weld™PG II and
3M™ Scotch-Weld™PG II LT.
Magazine Feeder
Benchmount
Foot Pedal
Tip No. Description
9726
"T" Tip (shown with valve and adapter) for all 3M™Applicators
9764 3/4" Slotted Spreader (3755LM adhesive only)
9777 1/4" Slotted Spreader (3755LM adhesive only)
9782 1/2" Slotted Spreader (3755LM adhesive only)
9727
"L" Tip (shown with adapter and valve) for all 3M™Applicators
9916 3 Hole Spreader
9913 2 Hole Spreader (1/4" hole span)
9917 3 Hole 1" Spreader for
3M™
Applicator II only
9929 High Viscosity Valve (TC, EC, PG-II)
9946 .072" Brass Extension for
3M™
Applicators PG II and PG II LT only
9785
.070" Tapered Aluminum Extension for all 3M™Applicators
9725 Mini Extension Tip .072" Opening for all
3M™
Applicators
9922 .063" Fluted Tip
9940 .125" Fluted Tip
9921 .090" Fluted Tip
A general purpose tip (.090) is supplied with
each 3M™Scotch-Weld™Applicator. To increase
productivity, optional tips can provide multiple
beads, flat ribbons, guided beads for
carton sealing, and extended reach. Bench nozzle assembly
Low Melt Applicators
Hot Melt Applicators
Variable
36
37
38
39
42
40 41
43
10
Ordering
Information
*Non-stocked items
Product Color Size Container Size UPC SN
3750LM Tan 1/2"x12" AE 11 lbs 051115-31933 62-3758-9531-5
3755LM Clear 5/8" x 2" TC 11 lbs 021200-83535 62-3755-9830-7
3762LM Lt. Amber 1" x 3" PG 22 lbs 021200-49128 62-3720-9330-2
3762LM Lt. Amber 1/2" x 12" AE 11 lbs 051115-25579 62-3720-9531-5
3762LM Lt. Amber 5/8" x 2" TC 11 lbs 021200-49134 62-3720-9830-1
3762LM Lt. Amber 5/8" x 8" Q 11 lbs 021200-49125 62-3720-9132-2
3762LMB Lt. Amber Pellets 22 lbs 021200-49130 62-3720-9335-1
3762LMB* Lt. Amber Pellets 950 lbs 021200-49133 62-3720-9339-3
3776LM* Tan 1" x 3" PG 22 lbs 021200-89501 62-3733-9330-5
3776LM Tan 1/2" x 12" AE 11 lbs 021200-25583 62-3733-9531-8
3776LM Tan 5/8" x 8" Q 11 lbs 021200-89499 62-3733-9132-5
3792LM Clear 1" x 3" PG 22 lbs 021200-83491 62-3760-9330-8
3792LM Clear 1/2" x 12" AE 11 lbs 021200-25580 62-3760-9531-1
3792LM Clear 5/8" x 2" TC 11 lbs 021200-82456 62-3760-9830-7
3792LM Clear 5/8" x 8" Q 11 lbs 021200-82454 62-3760-9132-8
3792LMB Clear Pellets 22 lbs 021200-43778 62-3760-9335-7
3792LMB Clear Pellets 950 lbs 021200-49098 62-3760-9339-9
3798LM Lt. yellow 5/8" x 2" TC 11 lbs 021200-41604 62-3798-9830-7
3798LMB* Lt. yellow Chips 11 lbs 021200-43825 62-3798-9335-7
3731 Tan 5/8" x 2" TC 11 lbs 021200-45271 62-3731-9132-9
3731* Tan 1" x 3" PG 22 lbs 021200-49139 62-3731-9330-9
3731 Off-White Chips 22 lbs 021200-49140 62-3731-9335-8
3738 Tan 1" x 3" PG 22 lbs 021200-82609 62-3738-9330-4
3738 Tan 1/2" x 12" AE 11 lbs 021200-82594 62-3738-9531-7
3738 Tan 5/8" x 2" TC 11 lbs 021200-82610 62-3738-9830-3
3738 Tan 5/8" x 8" Q 11 lbs 021200-65262 62-3738-9132-4
3738B Tan Pellets 22 lbs 021200-89305 62-3738-9335-3
3738B* Tan Pellets 950 lbs 021200-49094 62-3738-9339-5
3747 Tan 1" x 3" PG 22 lbs 021200-82221 62-3747-9330-5
3747 Tan 1/2" x 12" AE 11 lbs 021200-82220 62-3747-9531-8
3747 Tan 5/8" x 2" TC 11 lbs 021200-82560 62-3747-9830-4
3747 Tan 5/8" x 8" Q 11 lbs 021200-82561 62-3747-9132-5
3748 Off-White 1" x 3" PG 22 lbs 021200-82585 62-3748-9330-3
3748 Off-White 5/8" x 2" TC 11 lbs 021200-82584 62-3748-9830-2
3748 Off-White 5/8" x 8" Q 11 lbs 021200-76374 62-3748-9132-3
3748B Off-White Chips 22 lbs 021200-43752 62-3748-9335-2
3748 Black 5/8" x 8" Q 11 lbs 021200-45242 62-3724-9132-4
3748VO* Lt. Yellow 1" x 3" PG 22 lbs 021200-85797 62-3768-9330-1
3748VO* Lt. Yellow 5/8" x 2" TC 11 lbs 021200-85816 62-3768-9830-0
3748VO Lt. Yellow 5/8" x 8" Q 11 lbs 021200-85795 62-3768-9132-1
3750 Tan 1/2" x 12" AE 11 lbs 021200-96269 62-3750-9531-2
3750 Clear 1/2" x 12" AE 11 lbs 021200-97353 62-3757-9531-7
3762 Tan 1" x 3" PG 22 lbs 021200-82614 62-3762-9330-4
3762 Tan 1/2" x 12" AE 11 lbs 021200-82596 62-3762-9531-7
3762 Tan 5/8" x 2" TC 11 lbs 021200-82615 62-3762-9830-3
3762 Tan 5/8" x 8" Q 11 lbs 021200-65261 62-3762-9132-4
3764 Clear 1" x 3" PG 22 lbs 021200-82598 62-3764-9330-0
3764 Clear 1/2" x 12" AE 11 lbs 021200-82597 62-3764-9531-3
3764 Clear 5/8" x 2" TC 11 lbs 021200-82599 62-3764-9830-9
3764 Clear 5/8" x 8" Q 11 lbs 021200-76054 62-3764-9132-0
3764B Clear Pellets 22 lbs 021200-87850 62-3764-9335-9
3764B Clear Pellets 950 lbs 021200-41526 62-3764-9337-5
3779 Amber 1" x 3" PG 22 lbs 021200-82602 62-3779 9330-8
3779 Amber 5/8" x 2" TC 11 lbs 021200-82603 62-3779-9830-7
3779 Amber 5/8" x 8" Q 11 lbs 021200-85799 62-3779-9132-8
3779B* Amber Pellets 22 lbs 021200-89307 62-3779-9335-7
3789 Brown 1" x 3" PG 22 lbs 021200-82371 62-3789-9330-7
3789 Brown 5/8" x 8" Q 11 lbs 021200-82369 62-3789-9132-7
3789* Brown Pellets 22 lbs 021200-89308 62-3789-9335-6
3792 Clear 1" x 3" PG 22 lbs 021200-82606 62-3792-9330-1
3792 Clear 1/2" x 12" AE 11 lbs 021200-82583 62-3792-9531-4
3M™Scotch-Weld™Hot Melt Adhesives
Hot Melt Technology:
Applied 350°–385°F (177°–196°C)
Low Melt Technology:
Applied 250°–270°F (127°–132°C)
11
*Non-stocked items
*Non-stocked items
Product Color Size Container Size UPC SN
3792 Clear 5/8" x 2" TC 11 lbs 021200-82589 62-3792-9830-0
3792 Clear 5/8" x 8" Q 11 lbs 021200-65263 62-3792-9132-1
3792B* Clear Pellets 22 lbs 021200-87960 62-3792-9335-0
3792B Clear Pellets 950 lbs 021200-49097 62-3792-9339-2
3794 Clear 2 lb Loaf 34 lbs 021200-43830 62-3794-6630-3
3796 Lt. Tan 1" x 3" PG 22 lbs 021200-25352 62-3761-9330-6
3796 Lt. Tan 5/8" x 2" TC 11 lbs 021200-25353 62-3731-9830-5
3797 Off-White 1" x 3" PG 22 lbs 021200-82592 62-3797-9330-0
3797 Off-White 5/8" x 2" TC 11 lbs 021200-82593 62-3797-9830-9
6111B Green Chips 22 lbs 021200-96590 62-6112-9335-8
6111B Tan Chips 22 lbs 021200-96589 62-6111-9335-0
6111HTB Tan Chips 22 lbs 021200-43779 62-6113-9335-6
6111HTB Tan Chips 850 lbs 021200-56567 62-6113-9339-8
6111HTB Blue Chips 22 lbs 021200-49935 62-6115-9335-1
6111HTB* Blue Chips 850 lbs 021200-56568 62-6115-9339-3
6116 Off-White Chips 22 lbs 021200-49924 62-6116-9335-9
3M™Scotch-Weld™Hot Melt Adhesives (continued)
Product UPC SN
LT 021200-82245 62-9281-9930-6
LT with Quadrack Converter and
Palm Trigger 021200-89447 62-9281-9950-4
Pneumatic PG II LT with Speedloader
and Cartridge Feed 021200-89395 62-9783-9630-7
Pneumatic PG II LT with Speedloader
and Magazine Feed 021200-89396 62-9783-9830-3
AE II LT 051115-25567 62-9799-9930-7
TC 021200-82244 62-9990-9935-1
TC with Quadrack Converter and 021200-89445 62-9990-9950-0
Palm Trigger
Pneumatic PG II with Speedloader and
Cartridge Feed includes bench stand
and tips 9921 and 9946 021200-22033 62-9938-9630-7
Pneumatic PG II Refurbished with
Speedloader and Cartridge Feed* 021200-64787 62-9949-9931-6
Pneumatic PG II with Speedloader and
Magazine Feed includes bench stand
and tips 9921 and 9946 021200-22034 62-9938-9830-3
Pneumatic PG II Refurbished with
Speedloader and Magazine Feed 021200-64788 62-9949-9932-4
AEII 021200-96594 62-9796-9930-3
EC 021200-89519 62-9680-9930-9
3M™Scotch-Weld™Hot Melt Applicators
Product Description UPC SN
9726 "T" Tip Assembly 021200-64542 62-9726-9930-0
9764 3/4" Slotted Spreader for
use w/3755LM adhesive 021200-83526 62-9764-9930-1
9777 1/4" Slotted Spreader for
use w/3755LM adhesive 021200-83732 62-9777-9930-3
9782 1/2" Slotted Spreader for
use w/3755LM adhesive 021200-83529 62-9782-9930-3
9727 "L" Tip with Adapter 021200-64543 62-9727-9930-8
9916 3 Hole Spreader 021200-21836 62-9916-9930-7
9913 2 Hole Spreader 021200-21830 62-9913-9930-4
9917 3 hole 1" Spreader 021200-21837 62-9917-9930-5
9729 High Viscosity Valve
(TC, EC, PG II) 021200-64840 62-9729-9930-4
9946 .072" Brass Extension
(PG II, PG II LT) 021200-22040 62-9946-6980-2
9785 .070" Tapered Aluminum
Extension (all applicators) 021200-82554 62-9785-9930-6
9725 .072" Mini Extension Tip 021200-21786 62-9725-9930-2
9922 .063" Fluted Tip 021200-21841 62-9922-0066-7
9940 .125" Fluted Tip 021200-22036 62-9940-6920-1
9921 .090" Fluted Tip 021200-21840 62-9921-0066-9
Heavy Duty Bench
Stand for use with
PG II & PG II LT – 021200-22039 62-9945-9930-6
Heavy Duty bench
Stand for use with
EC, TC, & LT – 021200-82418 62-9945-9935-5
Bench Mount 021200-82277 62-9276-9930-6
Bench Nozzle
Assembly – 021200-21713 62-9233-2781-1
Foot Pedal Assembly – 021200-82278 62-9277-9930-4
TC & LT Palm Trigger – 021200-82701 62-9761-9930-7
TC Quadrack
Converter – 021200-83536 62-9275-9935-7
3M™Scotch-Weld™Hot Melt Accessories
Bulk
Hot Melt Technology:
Applied
350°–385°F (177°–196°C)
44 45
Industrial Adhesives and Tapes Division
900 Bush Avenue, Building 21-1W-10
St. Paul, MN 55144-1000
www.3M.com/adhesives
3M, Fastbond, Scotch-Grip,
and Scotch-Weld are trademarks
of 3M Company.
Printed in U.S.A.
© 3M 2008
78-6900-2947-1
Limited Product Warranty: 3M warrants all 3M™ Scotch-Weld™ Hot Melt Applicators for 6 months from the date of manufacture, that the 3M product will be free of
defects in material and manufacture. 3M MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. This warranty does not cover damage resulting from the use or inability to use the 3M product due to misuse,
workmanship in application, or application or storage not in accordance with 3M recommended procedures. Important Notice: User is responsible for determining whether
the 3M product is fit for a particular purpose and suitable for user’s method of application. Please remember that many factors can affect the use and performance of a
3M product in a particular application. The materials to be bonded with the product, the surface preparation of these materials, the product selected for use, the conditions in
which the product is used, and the time and environmental conditions in which the product is expected to perform are among the many factors that can affect the use and
performance of a 3M product. Given the variety of factors that can affect the use and performance of a 3M product, some of which are uniquely within the user’s knowledge
and control, it is essential that the user evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for the user’s method of application.
Limitation of Remedies and Liability: If the 3M product is proved to be defective within the warranty period stated above, THE EXCLUSIVE REMEDY, AT 3M’S OPTION,
SHALL BE TO REFUND THE PURCHASE PRICE OF OR TO REPAIR OR REPLACE THE DEFECTIVE 3M PRODUCT. 3M shall not otherwise be liable for loss or damages, whether
direct, indirect, special, incidental, or consequential,regardless of the legal theory asserted, including negligence, warranty, or strict liability.
3M™Scotch-Weld™Polyurethane
Reactive (PUR) Adhesive Systems
for structural adhesive benefits with
hot melt speed.
3M™Industrial Aerosol Adhesives
for a fistful of bonding power
with a wide variety of materials.
3M™Fastbond™
Water-based
Adhesives for
productivity,
performance,
profitability,
and compliance.
3M™Scotch-Weld™
Cylinder Spray
Adhesives for bulk
productivity with
aerosol convenience
and portability.
Other 3M™Adhesive Technologies
for improved design, productivity, and performance
3M™Scotch-Weld™
Structural Adhesives for
the permanent bonding
power of epoxies,
urethanes, acrylics,
and cyanoacrylates.
3M™Scotch-Grip™Rubber and
Plastic Adhesives for handy
tubes of bonding power.
46
47
48
50
51
49
