HG3G Operator Interface Touchscreens
8.4”
10.4”
8.4” and 10.4” Color TFT LCD Display •
65,536 Color LCD•
SVGA 800 x 600 Pixel Resolution•
Super Bright: •
600cd/m2 (8.4”), 700cd/m2 (10.4”)
Mounts Portrait or Landscape•
Remote Access, Monitor and Control •
Supports 2 Expansion I/O Modules •
Serial, Ethernet and USB ports•
Portrait
Landscape
New
Features!
High-performance Touchscreens
New Remote Monitor and Control
Remotely access your touchscreen over the internet for
trouble shooting and testing or maintenenace. This saves
you time and travel expenses.
Upoad, download or pass through programming•
Using your web browser you can monitor and control •
touchscreens using a PC, PDA or smartphone
Audio Out
External speaker with a built-in amplifier can be attached for sound •
output including prerecorded messages
Store up to 1,024 sound files in WAV file format•
The newest line of IDEC OI Touchscreens, the HG3G series, surpass all standards
with powerful features and the ability to remotely access, monitor and control
your application. A 400MHz high-speed CPU processor allows data to be read
and processed quickly, while the SD card and USB flash drive, along with the
serial, Ethernet and USB ports, provide many connectivity options.
The HG3G Series supports the addition of up to two IDEC MicroSmart digital
I/O cards and can be mounted in either portrait or landscape mode, making it a
flexible display that can accommodate all your application needs.
HG3G Series - Powerful, fast and easy to operate!
Sharp Displays with Excellent Clarity
SVGA Resolution (800 x 600 pixels)•
Support of 65,536 colors •
Brightest in the Market
600cd/m• 2 (8.4”), 700cd/m2 (10.4”)
Large Memory Capacity
12MB of user memory•
Additional memory using SD cards or USB flash drives•
Fast 400MHz CPU Processor
Quick operation and immediate response to commands•
Fast startup (within 3 seconds)•
2 Serial Ports:
Two serial ports, RS232 and RS485 (422)
Host - communicate to a PLC/Device in a 1:1 or •
1:N PLC Communication
Subhost - communicates to an IDEC MicroSmart/Pentra PLC or •
Modbus RTU devices
OI Link Communication – network to a single IDEC MicroSmart •
PLC with multiple HG2G/HG3Gs, where 1 is a master and up to
15 slaves can be connected
User Communication – use transmit/receive instructions to •
build your own protocol
Ethernet Port
10BaseT or 100Base-TX connection •
Remote communication with the PLC•
Access, monitor and control remotely via web browser using •
PC, PDA or smartphone
Powerful Connectivity
SD Card
Supports up to a 32GB SD card for storage •
Store IDEC MicroSmart ladder and •
touchscreen programs, pictures, logging data,
alarm logs, screen hard copies, recipe data,
operation logs and audio files
USB Port A (USB 2.0)
Store logging data and screen capture •
Connect barcode readers for labelling•
USB Port Mini B
Make system maintenance easier by utilizing •
the high-speed data transfer
Connect PC directly to the HG3G for program •
upload/download/monitor
USB printers can be connected directly•
Amazing Expandibility – up to 64 I/O
Programming Software - WindO/I-NV2
Intuitive, Drag-and-Drop Functionality
Programming software for all IDEC OI touchscreens•
Built-in library of over 7,000 symbols•
Built-in PLC drivers to communicate with other manufacturers’ PLCs, •
security, script, multilingual capabilities, and many more features
Easy I/O Control
Install up to two IDEC MicroSmart digital I/O cards for simple control •
Digital I/O is programmed using script commands or object addressing •
in the programming software
Specifications
General Specifications
Rated Power Voltage 24V DC
Power Voltage Range 20.4 to 28.8V DC
Power Consumption
25W maximum
15W maximum when not using USB interface
(USB2) or expansion module interface (EXT)
Allowable Momentary
Power Interruption 10ms maximum
Inrush Current 30A maximum
Dielectric Strength 1000V AC, 10mA, 1 minute between power and
FG terminals
Insulation Resistance 10MΩ minimum between power and FG
terminals (500V DC megger)
Operating Temperature 0 to +50°C
Operating Humidity 10 to 90% RH (no condensation)
Storage Temperature −20 to +60°C
Storage Humidity 10 to 90% RH (no condensation)
Pollution Degree 2
Vibration Resistance
5 to 9Hz amplitude 3.5 mm,
9 to 150Hz, acceleration 9.8m/s2
10 cycles (100 minutes) on each of three
mutually perpendicular axes
Shock Resistance
147 m/s2, 11ms
5 shocks on each of three mutually
perpendicular axes
Noise Immunity
Fast transient/burst test,
Power terminals: ±2kV,
Communication line: ±1 kV (IEC 61131-2: 2007)
Electrostatic Discharge Contact ±6kV, air ±8kV (IEC 61131-2: 2007)
Corrosion Immunity Free from corrosive gases
Mounting Panel mounting
Degree of Protection IP66
Dimensions HG3G-8: 231.0W × 176.0H × 54.4D mm
HG3G-A: 270.0W × 212.0H × 52.7D mm
Weight (approx.) HG3G-8: 2.75lbs
HG3G-A: 3.64lbs
Switching Element Analog resistive membrane
Operating Force 0.55 to 2.3N
Mechanical Life 1,000,000 operations
Sound Electronic buzzer or speaker output
Do not use the HG3G in an environment subject to strong ultraviolet rays,
otherwise the LCD quality will deteriorate.
IDEC Corporation • 1175 Elko Drive • Sunnyvale, CA 94089 • 800-262-IDEC (4332) • Fax: 408-745-5258 • www.IDEC.com/usa
©2011 IDEC Corporation. All Rights Reserved. Catalog No. HG9Y-DS300-1 04/11 3.5K
www.IDEC.com/usa/HG3G 800-262-IDEC
Dimensions (mm)
B
D
G
F
H
Panel thickness
2.0 to 5.0 KN
M
C
E
J
L
A
B
D
G
F
H
Panel thickness
2.0 to 5.0 KN
M
C
E
J
L
A
B
D
G
F
H
Panel thickness
2.0 to 5.0 KN
M
C
E
J
L
A
Panel Cut-out
Dimension Table (mm)
8.4”
HG3G-8
10.4”
HG3G-A
8.4”
HG3G-8
10.4”
HG3G-A
A176 212 H54.4 52.7
B231 270 J163.5 199.5
C32.6 30.9 K21 50.2
D218.5 257.5 L12.4 12.4
E38.2 36.5 M164 200
F6 6 N219 258
G48.4 46.7
Accessories
Part Number Qty Description
HG9Z-XCM2A 1 USB Programming Cable
HG9Z-3D8 1 Protective Sheet for 8.4” Display
HG9Z-3DA 1 Protective Sheet for 10.4” Display
HG9Z-XMS2 1 SD Card, 2GB
HG9Z-PMT10L 1 L-shaped Terminal Block for MicroSmart I/O
Module (10-pole)
HG9Z-PMT11 1 L-shaped Terminal Block for MicroSmart I/O
Module (11-pole)
HG9Z-4K2 1 Replacement Mounting Clip (order in
multiples of 4)
HG9Z-XU1 1 USB Cable Lock Pin
HG9Z-XJ1 1
Expansion Module Clamp (short size).
Use with 1 module or combination of 8, 16
I/O module
HG9Z-XJ2 1
Expansion Module Clamp (long size). For
supported comb. module, check WindOI-NV2
manual
Display Specifications
Display Color TFT Color LCD
Color/Shade 65,536 colors
Effective Display Area HG3G-8: 170.4W × 127.8H mm
HG3G-A: 211.2W × 158.4H mm
Display Resolution 800W × 600H pixels
View Angle Right and left 80°, up 80°, down 60°
Backlight LED
Backlight Life 60,000 hours nominal*
Brightness HG3G-8: 600 cd/m2, HG3G-A: 700 cd/m2
Brightness Adjustment 32 shades
User Memory 12MB (including expansion fonts)
*The backlight life refers to the time until the surface brightness reduces
by half after continuous use at room temperature.
Part Numbers
Display Screen Housing/Bezel Color Part Number
8.4-inch TFT
color LCD
Light gray HG3G-8JT22TF-W
Dark gray (black) HG3G-8JT22TF-B
10.4-inch TFT
color LCD
Light gray HG3G-AJT22TF-W
Dark gray (black) HG3G-AJT22TF-B
Support Information
Software demos & upgrades: www.IDEC.com/software
PLC drivers: www.IDEC.com/oi/drivers
OI to PLC Cables: www.IDEC.com/usa/HG3G