1 2 3 4 5
A
B
C
D
SIZE
A4
REV DATE FILE BY
APPROVAL: GMo UNIT: MM DESCRIPTION: 0.5MM ZIF FPC HORIZONTAL BOTTOM CONTACT TYPE -
TAPE & REEL PACKAGING
SCALE:
SHEET: 1/3 WERI PART NO: 687 1xx 145 22
DRAW: QL
PROJECTION: GENERAL TOLERANCE
.X = +/-0.2
.XX = +/-0.15
RoHS Compliant
MATERIAL:
HOUSING MATERIAL: LCP
COLOR: IVORY
ACTUATOR MATERIAL: PA9T
COLOR: BLACK
CONTACT MATERIAL: PHOSPOR BRONZE
CONTACT PLATING:
QUALITY CLASS: 25 MATING CYCLES*
ENVIRONNEMENTAL:
OPERATING TEMPERATURE: -25°C UP TO 85°C
COMPLIANCE: LEAD FREE AND ROHS
ELECTRICAL:
CURRENT RATING: 0.5 A
WORKING VOLTAGE: 50 V
INSULATION RESISTANCE: >100 MOHM
DIELECTRIC WITHSTANDING VOLT.: 250 VAC/MN
CONTACT RESISTANCE: 20 mOHM MAX
STANDARD
CERTIFIED: E323964
FOLLOWED BY 1, FOLLOWED BY 04 THRU 50, FOLLOWED
BY 140 OR 145, FOLLOWED BY NUMERIC DIGITS
SOLDERING:
JEDEC LEAD FREE REFLOW SOLDERING
DIMENSION:
B = 0.5 x NB PINS + 6.4
C = 0.5 x (NB PINS - 1)
D = 0.5 x (NB PINS + 1) + 0.1
E = 0.5 x (NB PINS + 1)
RECOMMENDED PCB LAYOUT - COMPONENT VIEW
*NOTE: theoretical value related to the Tin plating; however, due to the sensitive actuator, we recommend not to make more than 1 or 2 cycles in order to maintain acceptable mechanical & electrical conditions
H 23-JAN-13 UNIT µ => µ’’ QL
100µ’’ TIN OVER 50µ’’ N I
I 13-DEC-13 TPK UPDATE QL
J 01-JUN-15 TPK UPDATE QL
K 09-MAY-16 TPK UPDATE AK
FLAMMABILITY RATING: UL94-V0
L 25-APR-17 ACTUATOR MAT. AK
M 22-JUN-17 RECOMMEND. FFC AK
1 2 3 4 5
A
B
C
D
SIZE
A4
REV DATE FILE BY
A
F
G
APPROVAL: GMo UNIT: MM DESCRIPTION: 0.5MM ZIF FPC HORIZONTAL BOTTOM CONTACT TYPE -
TAPE & REEL PACKAGING
SCALE:
SHEET: 2/3 WERI PART NO: 6871 xx 14522
DRAW: QL
PROJECTION: GENERAL TOLERANCE
.X = +/- 0.2
.XX = +/- 0.15
RoHS Compliant
B
C
D
E
1 2 3 4 5
A
B
C
D
SIZE
A4
REV DATE FILE BY
A 10-SEP-14 PDF QL
B
C
D
E
F
G
APPROVAL: JC UNIT: MM DESCRIPTION: DISCLAIMER
SCALE:
SHEET: 3/3 WERI PART NO: DISCLAIMER
DRAW: QL
PROJECTION: GENERAL TOLERANCE
.X = +/- 0.2
.XX = +/- 0.15
RoHS Compliant
Cautions and Warnings:
This electronic component is designed and developed with the intention for use
in general electronics equipments.
Before incorporating the components into any equipments in the field such as aerospace, aviation,
nuclear control, submarine, transportation, (automotive control, train control, ship control),
transportation signal, disaster prevention, medical, public information network etc. where higher safety
and reliability are especially required or if there is possibility of direct damage or injury to human body,
Wurth Elektronik must be asked for a written approval.
In addition, even electronic component in general electronic equipments, when used in electrical circuits
that require high safety, reliability functions or performance, the sufficient reliability evaluation-check
for the safety must be performed before by the user before usage.
1
1
1
22
2
Pull the actuator upwards in the open position Insert the FFC cable vertically until the conductor
almost disappears
Press both ends of the actuator
Press actuator in the middle to make there is no
gap and the actuator is locked
AB
Do not keep FFC inclined when insertion
A
B
Pull the actuator as horizontally as possible
by a proper force
Do not pull the actuator too far otherwise the stop
limit (hook on actuator) may be broken
Don’t keep conductor toward actuator
