5MPF SERIES Polypropylene Capacitor with FuseacTM Technology Cylindrical Can with Radial Terminals and Mounting Bolt Polypropylene film capacitor for AC applications. Internal fuse electrically disconnects when capacitor's hot spot reaches a defined temperature, without deforming the case. FEATURES: - AC rated - Range: -40C to +85C - Dry film construction - Permanent thermal disconnect, preventing catastrophic failures - Inverter output filtering, for Wye and Delta circuits STANDARD CONFIGURATION - Bolt Mounting Package Specification Summary Quality Control Capacitors are tested 100% for: Capacitance Range 10uF - 250uF Capacitance Tolerance Standard tolerances are 5% & 3% Operating Temperature Range -40C to +85C Enclosure/ Construction Polypropylene film capacitor in an cylindrical aluminum housing with high current threaded terminations and mounting bolt Voltage Rating AC working voltage ratings at +85C, 300, 600 and 900 VAC at 60Hz Maximum o Capacitance tolerance oDissipation Factor o Dielectric withstanding voltage o Insulation Resistance o Equivalent Series Resistance (ESR) Process and inspection data are maintained on file and available on special request. Environmental Parameter Vibration Immersion Shock Humidity Thermal Shock Life Method 204 104 213 106 107 108 Condition D B I A F Reference MIL-STD-202 Characteristics Insulation Resistance Temperature (C ) 25 Megaohms x 25,000 Microfarads 85 5,000 Insulation Resistance Capacitance Change Temperature (C ) -55 Percentage Change 1.4 (typical) 25 0 85 -2.5 105 -3.5 Capacitance Change Dissipation Factor When measured at 120Hz specified for capacitance measurement, the Dissipation Factor will not exceed 0.10%. Dielectric Strength Capacitors withstand a DC potential of 1.5 times rated DC voltage for one (1) minute without damage or breakdown. Test voltage is applied and discharged through a minimum resistance of 1 OHM per volt, minimum. DETAIL DATA EC PART NUMBER 5MPF1107_ 5MPF1157_ 5MPF1207_ 5MPF1257_ 5MPF2206_ 5MPF2406_ 5MPF2506_ 5MPF2606_ 5MPF3106_ 5MPF3156_ 5MPF3206_ 5MPF3256_ HEIGHT "H" ESR CAP VAC VDC F mOhms in mm 100 300 450 3.031 77 2.2 150 300 450 4.016 102 3.4 200 300 450 5.000 127 4.6 250 300 450 5.984 152 5.8 20 600 900 3.031 77 2.7 40 600 900 4.409 112 3.9 50 600 900 5.000 127 4.4 60 600 900 5.984 152 5.8 10 900 1350 3.031 77 2.2 15 900 1350 4.016 102 3.1 20 900 1350 5.000 127 4.5 25 900 1350 5.984 152 5.8 ESL nH Fres I PEAK dv/dt kHz AMPS (V/s) 49 79 110 143 49 90 110 143 49 79 110 143 72.1 46.3 33.9 26.6 161.2 83.9 68.2 54.6 225.3 146.5 107.2 84.1 3324 3227 3180 3153 2709 3167 3313 3126 3429 3547 3305 3175 33 22 16 13 135 79 66 52 343 236 165 127 TEMPERATURE Arms 25C 45C 65C 63.0 53.4 41.7 53.3 45.2 35.3 46.4 39.4 30.7 40.4 34.3 26.7 52.6 44.6 34.8 49.8 42.2 33.0 47.9 40.6 31.7 40.1 34.0 26.5 62.3 52.8 41.2 56.7 48.1 32.5 47.5 40.3 31.4 40.4 34.3 26.8 85C 25.0 21.2 18.4 16.0 20.9 19.8 19.0 15.9 24.7 22.5 18.8 16.0 Notes: (1) ESR is Measured at Resonant Frequency (2) Current referenced at 10kHz (3) VAC rating at 60Hz STYLE Rth C/W 7.68 7.01 6.87 7.21 8.80 7.00 6.76 7.29 7.48 6.62 6.72 7.19 REVOLUTIONARY SAFETY TECHNOLOGY FuseacTM technology was created to provide designers of power management systems, utilizing metallized dry film capacitors, with a superior protection mechanism. Electronic Concepts, Inc. has developed a revolutionary fuse to detect the capacitor's hot spot and electrically disconnect upon reaching a defined critical value. Metallized film capacitors, mainly due to self healing of inherent defects, are reliable and long lasting over the life of the product. However, excessive self healing and fail catastrophically. FuseacTM provides added insurance against disastrous failures. FuseacTM is a patent pending technology and on request can be incorporated in a host of Electronic Concepts products, especially into designs needing added overheating protection. HOW TO ORDER TYPE 5MP Metallized polypropylene STYLE / VOLTAGE F2 AC High Power, F1(300VAC)-F2(600VAC)-F3(900VAC) CAPACITANCE IN PICO FARADS The first two digits are significant, the third represents the number of zeros (e.g 506=50,000,000pF) TOLERANCE 506 J J=5% Also available: E=3% Marking And Date Code All capacitors are marked with company initials "EC", corporate logo or EC trademark--in addition to type 5MPA, capacitance, tolerance, rated DC working voltage and date code. The first two digits of the date code represent the year, the second two digits the week, i.e., 0952 is the 52nd week of 2009, 0902 is the second week of 2009. Quality Assurance Major emphasis is placed on quality assurance. EC is an ISO 9001-2000 and AS9100:2004 Certified Company. Raw material inspection and the use of SPC manufacturing procedures assure the highest quality standards. Procedures are fully described in the EC Quality Control Manual. Electronic Concepts will continue to advance the state-of-the-art by utilizing leading edge technology, compact capacitor designs and establishing reliability procedures. Sales Offices United States Eastern: *Headquarters* P.O. Box 1278 Eatontown, NJ 07724 Tel: 732-542-7880 Fax: 732-542-0524 Central: Illinois 630-668-8747 email: sales@ecicaps.com website:www.ecicaps.com Europe Ireland Electronic Concepts, LTD IDA Estate, Oughterad Co. Galway, Ireland tel: +353-91-552385, 552432 fax: +353-91-552387 email: sales@ecicaps.ie website:www.electronicconcepts.ie Rev. A