6ES7232-4HA30-0XB0 - SIEMENS

Page 1

A5E02486860-AB Industry Sector

S7-1200 and TIA portal software

 The S7-1200 is the successor of the S7-200. The S7-1200 is designed for and sold in the world-

wide marketplace.

 The SIMATIC S7-200 products are declared phased-out products effective 10/01/2013. With

their phase-out declaration, the products will still be available as new components for another year

until 10/01/2014. After that, the products can be obtained as spare parts for an additional 9 years.

For new applications, it is recommended to employ SIMATIC S7-1200 products with the

configuration software STEP 7 Basic.

 The TIA portal with STEP 7 Basic programming (ordered separately from the hardware) is used

for programming the S7-1200.

- Provides LAD (Ladder diagram, FBD (Function Block Diagram), and SCL (Structured Control

Language) programming editors.

- STL (Statement List) programming is not supported.

- Includes WinCC Basic for configuring HMI Basic panels.

- No separate USB license stick is required. The software is automatically activated when

installed.

 To move project files from one PC to another PC, use the Windows explorer and file

compression to copy the project directory structure.

S7-1200 Agency approvals

 S7-1200 hardware has the necessary approvals for the US and European market.

 The S7-1200 has cFMus approval for hazardous locations:

The Factory Mutual Research FM): Approval Standard Class Number 3600 and 3611

Approved for use in:

- Class I, Division 2, Gas Group A, B, C, D, Temperature Class T3C, Ta = 60° C

- Class I, Zone 2, IIC, Temperature Class T3 , Ta = 60° C

 The S7-1200 hardware has cULus and CE approvals.

Page 2

A5E02486860-AB Industry Sector

S7-1200 CPU

Digital I/O CPU

Analog I/O CPU

Power and I/O type

CPU 1211C 6 IN - 4 OUT 2 IN

Available in three options of

CPU power / input type / output type.

•DC / DC / DC

•AC / DC / Relay

•DC / DC / Relay

CPU 1212C 8 IN – 6 OUT 2 IN

CPU 1214C

14 IN -10 OUT

2 IN

CPU 1215C 14 IN -10 OUT 2 IN - 2 OUT

CPU 1217C

10 IN Sink/source

4 IN 1.5V differential

6 OUT MOSFET sourcing

4 OUT 1.5V differential

2 IN - 2 OUT

Available as DC / DC / DC only

S7-1200 communication options

On-board PROFINET network connection

CB 1241 RS485

CM 1241 RS232

CM 1241 RS485

CM 1241 RS422/485

CP 1242-7 GPRS

CM 1242-5 PROFIBUS slave

CM 1243-5 PROFIBUS master

CM 1243-1 DNP3 Ethernet WAN

CM 1243-1 IEC Ethernet WAN

CP 1243-1 Ethernet WAN (firewall and VPN)

CM 1243-2 AS-I master

RF120C RFID

TS Adapter and TS adapter modular for SIMATIC Teleservice

Page 3

A5E02486860-AB Industry Sector

S7-1200 I/O options

Digital and analog signal

modules SM 1221 digital IN DI 8 x 24 VDC

DI 16 x 24 VDC

SM 1222 digital OUT DQ 8 x Relay

DQ 8 x Relay NO/NC contacts

DQ 8 x 24 VDC

DQ 16 x Relay

DQ 16 x 24 VDC

SM 1223 digital IN/OUT DI 8 x 24 VDC / DQ 8 x Relay

DI 16 x 24 VDC / DQ 16 x Relay

DI 8 x 24 VDC / DQ 8 x 24 VDC

DI 16 x 24 VDC / DQ 16 x 24 VDC

DI 8 x 120/230 VAC / DQ 8 x Relay

SM 1231 analog IN AI 4 x 13 bit, AI 8 x 13, AI 4 x 16

SM 1232 analog OUT AQ 2 x 14 bit, AQ 4 x 14

SM 1234 analog IN/OUT AI 4 x 13 bit / AQ 2 x 14 bit

Thermocouple and RTD

signal modules SM 1231 thermocouple IN AI 4 x 16 bit TC, AI 8 x 16 TC

SM 1231 RTD AI 4 x RTD x 16 bit, AI 8 x RTD x 16

Digital signal boards SB 1221 digital IN DI 4 x 24 VDC, 200 kHz

DI 4 x 5 VDC, 200 kHz

SB 1222 digital OUT DQ 4 x 24 VDC, 200 kHz

DQ 4 x 5 VDC, 200 kHz

SB 1223 digital IN/OUT DI 2 x 24 VDC / DQ 2 x 24 VDC, 200 kHz

DI 2 x 5 VDC / DQ 2 x 5 VDC, 200 kHz

Analog signal boards SB 1231 analog IN AI 1 x 12 bit

SB 1231 analog OUT AQ 1 x 12 bit

Thermocouple and RTD

signal boards SB 1231 Thermocouple IN AI 1 x 16 bit TC

SB 1231 RTD IN AI 1 x 16 bit RTD

IO-Link technology SM 1278 4xIO-Link Master DI 4x24 VDC or DQ 4x 24 VDC

Weighing technology SIWAREX WP231, WP241

Page 4

A5E02486860-AB Industry Sector

Page 5

A5E02486860-AB Industry Sector

Password protection

S7-200: Off-line block protection passwords provide know-how protection that prevents

unauthorized access to your code blocks.

The S7-200 on-line password level is assigned in the system block . There are no restrictions

on any on-line password level to read/write user data, stop/start/restart the CPU, and

read/write the time-of-day clock.

-Level 1 full access: No protection

-Level 2 restricted access: A password is required to download to a CPU, view STL status,

delete user program/data/configuration, force program data, copy to the memory cartridge,

and write to the outputs in STOP mode.

-Level 3 restricted access: In addition to the level 2 restrictions, a password is also required to

upload the user program, data, and the CPU configuration.

S7-1200: Off-line block protection passwords provide know-how protection that prevents

unauthorized access to your code blocks.

The S7-1200 on-line password level is assigned in the CPU device configuration properties.

-Level 1 full access: No protection

-Level 2 read access: The CPU allows HMI access and all forms of PLC-to-PLC

communications without password protection. Password is required for modifying (writing to)

the CPU and for changing the CPU mode (RUN/STOP).

-Level 3 HMI access: The CPU allows HMI access and all forms of PLC-to-PLC

communications without password protection. Password is required for reading the data in

the CPU, for modifying (writing to) the CPU, and for changing the CPU mode (RUN/STOP).

-Level 4 No access: The CPU allows no access without password protection. A password is

required for HMI access, reading the data in the CPU, for modifying (writing to) the CPU, and

for changing the CPU mode (RUN/STOP).

I/O address assignment

 S7-200 : I/O addresses are automatically fixed by the CPU operating system according to

module location.

 S7-1200: The default I/O assignment can be modified by Device configuration properties.

Page 6

A5E02486860-AB Industry Sector

S7-1200 serial communication

MODBUS RTU is possible on both RS485/422 and RS232 signal modules.

The USS library is supported on the RS485 port and is included with STEP 7 Basic.

The CM 1241 RS232 module supports handshaking.

 The S7-1200 RS232 and RS485/422 modules have electrically isolated ports.

Page 7

A5E02486860-AB Industry Sector

S7-1200 Ethernet communication

The PROFINET port on the CPU supports simultaneous communication connections:

 OPC server (Object Linking and Embedding – OLE) for Process Control server. OPC

functionality is possible using the SIMATIC NET OPC Server.

 PROFINET functionality including controller and device

 The S7-1200 Ethernet interfaces are designated as PROFINET which supports PROFINET IO

and iDevices.

 Communication with 3rd party devices via the Ethernet is supported. The S7-1200 has "Native"

Ethernet TCP/IP protocol available ("FreePort" for Ethernet) for custom development of this

functionality. It is possible to communicate with 3rd party PLCs as long as they support the same

open Ethernet connectivity as the S7-1200.

Programming

terminal (PG)

Human

Machine

Interface

(HMI)

GET/PUT

client/server

Open User

Communications

Web browser

Maximum

number of

connection

resources

3

guaranteed to

support

1 PG device

12

guaranteed to

support

4 HMI devices

8

30

guaranteed to

support

3 web browsers

Page 8

A5E02486860-AB Industry Sector

S7-1200 HMI general

 HMI Basic Panels can communicate with up to four S7-1200 CPUs.

 Compatibility with current HMI Ethernet devices

 MP277 and 377 (discontinued panels) can communicate with the S7-1200. Use WinCC flexible

for programming and select the S7-300 communication channel (Rack 0 - Slot 0) at the start.

HMI update rate

 S7-200: HMI data update occurs at end of the program scan and is therefore scan rate limited.

 S7-1200: HMI data update occurs asynchronously during the program scan. You must ensure

that data variables are buffered from change, during program processing where new HMI data

values are generated.

Page 9

A5E02486860-AB Industry Sector

Siemens provides products and solutions with industrial security functions that support the secure

operation of plants, solutions, machines, equipment and/or networks. They are important

components in a holistic industrial security concept. With this in mind, Siemens’ products and

solutions undergo continuous development. Siemens recommends strongly that you regularly

check for product updates.

For the secure operation of Siemens products and solutions, it is necessary to take suitable

preventive action (e.g. cell protection concept) and integrate each component into a holistic, state-

of-the-art industrial security concept. Third-party products that may be in use should also be

considered. You can find more information about industrial security on the Internet

(http://www.siemens.com/industrialsecurity).

To stay informed about product updates as they occur, sign up for a product-specific newsletter.

You can find more information on the Internet (http://support.automation.siemens.com).

Page 10

A5E02486860-AB Industry Sector

BASIC HMI panels supported by S7-1200 CPUs

1st gen: KP300 BASIC MONO PN, 3” monochrome LCD, 10 keys

1st gen: KP400 Basic COLOR PN, 4” -256 colors , 4 keys

1st gen: KTP400 BASIC MONO PN and COLOR PN, 4”-256 colors , touch, 4 keys

2nd gen: KTP 400 BASIC 4”- 65536 colors, touch, 4 keys

1st gen: KTP600 BASIC MONO PN, COLOR PN, and COLOR DP, 6”-256 colors, touch, 6 keys

2nd gen: KTP700 BASIC, 7”- 65536 colors, PROFINET, 8 keys

2nd gen: KTP900 BASIC, 9”- 65536 colors, PROFINET, 8 keys

1st gen: KTP1000 BASIC COLOR PN and COLOR DP, 10“-256 colors, touch, 8 keys,

1st gen: TP1500 BASIC COLOR PN 15“-256 colors, touch

HMI Basic panels require a PC for a download operation. They do not have memory cards.

WinCC Flexible Micro will be available as long as HMI Micro panels (for the S7-200) are sold.

At this time there are no plans for discontinuing the micro panel.

Library graphics are created in WinCC Flexible.

It is not possible to migrate any library items directly from WinCC Flexible to WinCC Basic.

However, you can copy all the elements from the library to an HMI screen in a project and

then migrate the resulting project into WinCC Basic.

 Changing from WinCC flexible to WinCC Basic: A firmware update is not necessary in the

case of WinCC flexible 2008 and WinCC Basic.

 The S7-1200 does not support Sm@RtAccess or Sm@rtService.

The TIA Portal provides the tools for managing and configuring the devices in your project,

such as PLCs and HMI devices. As a component of the TIA Portal, STEP 7 Basic provides

three programming languages (LAD, FBD, and SCL). The TIA Portal also provides the tools

for creating and configuring the HMI devices in your project.

Page 11

A5E02486860-AB Industry Sector

Page 12

A5E02486860-AB Industry Sector

Page 13

A5E02486860-AB Industry Sector

Page 14

A5E02486860-AB Industry Sector

Page 15

A5E02486860-AB Industry Sector

Page 16

A5E02486860-AB Industry Sector

S7-1200 memory cards

SIMATIC memory cards have a Windows file system and comply with the necessary industrial

requirements. The memory card can be written to and read in a PC with standard SD slot and then

used again for operation in a CPU.

Page 17

A5E02486860-AB Industry Sector

S7-1200 SIMATIC memory card usage

Before programming a memory card, be sure there is a valid network configuration in your project

so that it can connect to the PLC after installing the card.

SIMATIC memory cards are pre-formatted with a SIMATIC memory format that must be preserved.

Do not use a PC to delete the two hidden files __log__ (system file) and crdinfo.bin (bin file). Do not

use a PC to reformat the memory card or the card will become unusable.

Refer to the S7-1200 Programmable controller system manual for details on how to create and use

a “Program” card and “Transfer” card.

Page 18

A5E02486860-AB Industry Sector

S7-1200 Organization Block (OB) types:

Program cycle OB1

Startup OB100 series

Time delay interrupt OB200 series

Cyclic interrupt OB200 series

Hardware interrupt OB200 series

Time error interrupt OB80

Diagnostic error interrupt OB82

Pull or plug of modules OB83

Rack or station failure OB86

Time of day OB10

Status OB55

Update OB56

Profile OB57

Non-fatal error handing

S7-200: By default, continue RUN mode

S7-1200: By default, go to STOP mode

-If OB80 or OB82 error OB blocks exist in your program, then continue RUN mode.

-OB80 and OB82 may be empty or contain your programmed error reaction.

Page 19

A5E02486860-AB Industry Sector

Page 20

A5E02486860-AB Industry Sector

Page 21

A5E02486860-AB Industry Sector

Page 22

A5E02486860-AB Industry Sector

Page 23

A5E02486860-AB Industry Sector

Page 24

A5E02486860-AB Industry Sector

Page 25

A5E02486860-AB Industry Sector

Page 26

A5E02486860-AB Industry Sector

Page 27

A5E02486860-AB Industry Sector

Page 28

A5E02486860-AB Industry Sector

Page 29

A5E02486860-AB Industry Sector

Page 30

A5E02486860-AB Industry Sector

Page 31

A5E02486860-AB Industry Sector

Page 32

A5E02486860-AB Industry Sector

Page 33

A5E02486860-AB Industry Sector

Page 34

A5E02486860-AB Industry Sector

Page 35

A5E02486860-AB Industry Sector

Page 36

A5E02486860-AB Industry Sector

Page 37

A5E02486860-AB Industry Sector

Page 38

A5E02486860-AB Industry Sector

Page 39

A5E02486860-AB Industry Sector

Page 40

A5E02486860-AB Industry Sector

Page 41

A5E02486860-AB Industry Sector

Page 42

A5E02486860-AB Industry Sector

Page 43

A5E02486860-AB Industry Sector

Page 44

A5E02486860-AB Industry Sector

Page 45

A5E02486860-AB Industry Sector

Page 46

A5E02486860-AB Industry Sector

Page 47

A5E02486860-AB Industry Sector

Page 48

A5E02486860-AB Industry Sector

Page 49

A5E02486860-AB Industry Sector

Page 50

A5E02486860-AB Industry Sector

Page 51

A5E02486860-AB Industry Sector

Page 52

A5E02486860-AB Industry Sector

Page 53

A5E02486860-AB Industry Sector

Page 54

A5E02486860-AB Industry Sector

Page 55

A5E02486860-AB Industry Sector

Page 56

A5E02486860-AB Industry Sector

Page 57

A5E02486860-AB Industry Sector