WKV Kupplung nach IEC 61076-2-106, IP 40, abgewinkelt, mit Schraubverschluss, Massekontakt, Knickschutztulle und Lotanschlussen 1. Temperaturbereich -40 C/+85 C 2. Werkstoffe Kontakttrager Kontaktbuchse 3- bis 8-polig Kontaktbuchse 12-polig Erdungsfahne Gehause Randelmutter Knickschutztulle Zugentlastung Hulse Schraube PA GF CuZn, versilbert und flashvergoldet CuZn, unternickelt und vergoldet CuZn, unternickelt und verzinnt PC CuZn, vernickelt TPE Stahl, vernickelt Stahl, verzinkt Edelstahl/Stahl chromatiert 3. Mechanische Daten Steckkraft/Kontakt 3- bis 8-polig1 Steckkraft/Kontakt 12-polig2 Ziehkraft/Kontakt 3- bis 8-polig1 Ziehkraft/Kontakt 12-polig2 Kontaktierung mit Schutzart3 Weiteres siehe Tabelle < 5,0 N < 5,0 N > 1,2 N > 0,9 N Steckern 033098, 033099, SFV, SGR, SGV, SV, WSV Steckern nach IEC 61076-2-106 und IEC 60130-9 IP 40 4. Elektrische Daten Durchgangswiderstand Weiteres siehe Tabelle 1 2 3 4 5 m gemessen mit einem polierten Stahlstift, Nennma 1,5 mm gemessen mit einem polierten Stahlstift, Nennma 1,0 mm nach DIN EN 60529, nur in verschraubtem Zustand mit einem dazugehorigen Gegenstuck nach VDE 0110/IEC 60664 Polbilder, von der Lotseite gesehen Pin configurations, solder side view Schemas de raccordement, vus du cote a souder WKV 30 WKV 40 www.lumberg.com WKV 50 WKV 50/6 WKV 60 WKV 70 WKV 71 WKV 80 WKV 81 WKV 120 11/2012 Rundsteckverbinder mit Schraubverschluss nach IEC 61076-2-106, IP 40 Circular connectors with threaded joint acc. to IEC 61076-2-106, IP 40 Connecteurs circulaires avec verrouillage a vis suivant CEI 61076-2-106, IP 40 WKV 03 WKV 03 Socket acc. to IEC 61076-2-106, IP 40, angular, with threaded joint, ground contact, bend protection and solder terminals 1. Temperature range Connecteur femelle suivant CEI 61076-2-106, IP 40, angulaire, avec verrouillage a vis, contact de masse, protecteur contre pliage et connexion par soudure -40 C/+85 C 1. Temperature d'utilisation 2. Materials Insulating body Contact bush 3 to 8 poles Contact bush 12 poles Grounding spring Housing Knurled nut Bend protection Strain relief Sleeve Screw PA GF CuZn, silvered and flash gilded CuZn, pre-nickeled and gilded CuZn, pre-nickeled and tinned PC CuZn, nickeled TPE steel, nickeled steel, zinced stainless steel/steel, chromated 2. Materiaux < 5.0 N < 5.0 N > 1.2 N > 0.9 N plugs 033098, 033099, SFV, SGR, SGV, SV, WSV plugs according to IEC 61076-2-106 and IEC 60130-9 IP 40 3. Caracteristiques mecaniques 5 m 4. Caracteristiques electriques Corps isolant Prise de contact 3 a 8 poles Prise de contact 12 poles Ressort de terre Boitier Ecrou molete Protection contre pliage Decharge de traction Douille Vis 3. Mechanical data Insertion force/contact 3-8 poles1 Insertion force/contact 12 poles2 Withdrawal force/contact 3-8 poles1 Withdrawal force/contact 12 poles2 Mating with Protection3 For further information see table -40 C/+85 C PA GF CuZn, argente et dore flash CuZn, sous-nickele et dore CuZn, sous-nickele et etame PC CuZn, nickele TPE acier, nickeled acier, zingue acier inoxydable/acier, chromate Force d'insertion/contact 3-8 poles1 < 5,0 N Force d'insertion/contact 12 poles2 < 5,0 N Force de separation/contact 3-8 poles1 > 1,2 N Force de separation/contact 12 poles2 > 0,9 N Raccordement avec connecteurs males 033098, 033099, SFV, SGR, SGV, SV, WSV connecteurs males suivant CEI 61076-2-106 et CEI 60130-9 IP 40 Protection3 Pour plus de details, voir tableau 4. Electrical data Contact resistance For further information see table 1 2 3 4 Resistance de contact Pour plus de details, voir tableau measured with a polished steel pin, nominal thickness 1.5 mm measured with a polished steel pin, nominal thickness 1.0 mm according to DIN EN 60529, only in locked position with a proper counterpart according to VDE 0110/IEC 60664 1 2 3 Designation mesuree avec une tige d'acier poli, epaisseur nominale 1,5 mm mesuree avec une tige d'acier poli, epaisseur nominale 1,0 mm suivant DIN EN 60529, uniquement a l'etat verrouille avec un propre pendant suivant VDE 0110/CEI 60664 Ans ch Wir lussque e se rsch ct nitt Sec tion ion de racc . de fil Kab eldu rchm Cab le es Dia diame ser met t re d er e ca ble Bem essu ngs Rat stro ed Cou curren m t ran t as sign e Bem essu ngs Rat spa ed Ten voltag 2 nnung 2 sion e assi gne 2 e Pru fspa nnu Test ng vo Ten ltage sion d'es sai Isol ati Insu onswid er lat Res ion re stand ista s nce istanc e d'is olem Kon ent tak t Con k tact apazit Cap at a capa con cite de citanc tact e Designation Ver pac ku Pac kag ngsein hei eu Uni te d nit (PU t (VE) 'em ) ball age (UE ) Bestellbezeichnung Polz ah Pole l s Pole s 4 5 m mm2 mm A V AC kV AC eff. G pF WKV 30 3 50 0,75 4-6 5 250 2 > 10 ~2 WKV 40 4 50 0,75 4-6 5 250 2 > 10 ~2 WKV 50 5 50 0,75 4-6 5 60 1 > 10 ~3 WKV 50/6 5 50 0,75 4-6 5 250 2 > 10 ~2 WKV 60 6 50 0,75 4-6 5 250 2 > 10 ~2 WKV 70 7 50 0,75 4-6 5 250 2 > 10 ~2 WKV 71 7 50 0,75 4-6 5 60 1 > 10 ~3 WKV 80 8 50 0,75 4-6 5 60 1 > 10 ~3 WKV 81 8 50 0,75 4-6 5 60 1 > 10 ~3 12 50 0,25 4-6 3 60 1 > 10 ~3 WKV 120 Verpackung: im Karton Packaging: in a cardboard box Emballage: dans un carton www.lumberg.com 11/2012