TC05 Series Thin Film Resistors Specification Table Type Power Rating (W) Maximum Working Voltage (V) RMC TC05 0.10 (1/10) 100 Maximum Resistors Range Temperature Ambient Overload Range Temperature (Special Low) Voltage ) ( (C) (C) (V) 200 -55 to +155 70 4.7 to 9.76 Resistors Resistors Range Range (Special High) ) ( ) ( 10 to 1M 1.1M to 2M Power Rating: Resistors shall have a power rating based on continuous load operation at an ambient temperature of 70C. For temperature in excess of 70C, The load shall be derate. Derating Curve Ambient temperature (C) Nominal Resistance Effective figures of nominal resistance shall be in accordance with E-24, E-96 and E-192 series. E-96 for 1%, E-24 series for 2%, 5%, 10% and E-192 for 0.5%, 0.25%, 0.1% . Page <1> 02/05/08 V1.1 TC05 Series Thin Film Resistors Construction: Power Rating and Dimensions Dimensions : Millimetres Dimensions Type L 0.15 W + 0.15 - 0.10 T 0.10 D1 0.20 D2 0.25 TC05 2.00 1.25 0.55 0.40 0.40 Dimensions : Millimetres Power Rating Type TC05 Power Rating Tolerance at 70C % (W) 0.10 (1/10) 0.1 Resistance Range (Special Low) ) ( Resistance Range ) ( Resistance Range (Special High) ) (M Standard Series PPM/C 4.7 to 9.76 10 to 1M 1.1 to 2 E-192 25 Page <2> 02/05/08 V1.1 TC05 Series Thin Film Resistors Marking on the Resistors: 0.1% Tolerance : 4 Digits, the first three digits are singnificant figures of resistance and the fourth digit denoted number of zeros.Letter"R" is for decimal point. 100 1000 2.74K 2741 Performance specifications Characteristics Limits Test Methods (JIS C 5201-1) Natural resistance change per temperature degree centigrade R2-R1/ R1 (t2-t1) x 106 (PPM/C) Temperature coefficient 4.7 to 2M 25 PPM/C Short time overload Resistance change rate is (0.5% + 0.05) Permanent resistance change after the application of a potential of 2.5 times RCWV for 5 seconds. Insulation resistance >1,000M Apply 100V DC between protective coating and termination for 1 minimum, then measure Dielectric withstanding voltage No evidence of flashover mechanical damage, arcing or insulation break down. Apply maximum. overload voltage for 1 minute. Terminal bending (0.2% + 0.05) Soldering heat Dip the resistor into a solder bath having a Resistance change rate is (0.2% + 0.05) temperature of 260C 5C and hold it for 10 1 seconds Load life in humidity Resistance change after 1000 hours (1.5 hours "on", 0.5 hour "off" ) at RCWV Resistance change rate is (0.3% + 0.05) in a humidity chamber controlled at 40C 2C and 90 to 95% relative humidity Load Life Resistance change rate is (0.2% + 0.05) >7K (0.5% + 0.05) Permanent resistance change after 1000 hours operating at RCWV, with duty cycle of (1.5 hours"on", 0.5 hour"off") at 70C 2C ambient. Solderability 95% coverage minimum Test temperature of solder Dipping them solder R1 R2 : Resistance value at room temperature (t1) : Resistance value at room temperature plus 100C (t2). Twist of test board Page <3> : Y/X = 5/90mm for 10 seconds. : 260C 5C : 2 0.5 seconds. 02/05/08 V1.1 TC05 Series Thin Film Resistors Resistance Preferred Value Range E6 10 E12 10 E24 10 11 E96 10.0 E6 E12 E24 E96 21.5 E6 E12 E24 E96 46.4 10.2 22 22 22 22.1 47 47 47 47.5 10.5 22.6 10.7 23.2 11.0 23.7 11.3 12 12 24 52.3 24.9 53.6 11.8 25.5 12.1 26.1 27 27 15 33 20 68.1 71.5 34.8 73.2 75 75.0 35.7 76.8 36.5 78.7 17.4 37.4 17.8 38.3 80.6 82 82 82.5 39.2 84.5 18.7 40.2 86.6 19.1 41.2 19.6 42.2 18.2 39 68 69.8 34.0 39 68 32.4 15.8 36 66.5 68 33.2 16.2 16.9 18 64.9 31.6 16.5 18 63.4 30.9 33 61.9 29.4 14.7 33 60.4 62 30.1 14.3 15.4 16 59.0 28.7 15.0 56.2 57.6 28.0 30 56 27.7 13.3 14.0 54.9 56 27.4 13.0 13.7 15 51.1 24.3 12.7 15 49.9 51 11.5 12.4 13 48.7 90.9 43.2 93.1 20.5 44.2 95.3 21.0 45.3 97.6 20.0 43 88.7 91 Above values in accordance with IEC Publication 63 (1963) and BS2488 Page <4> 02/05/08 V1.1 TC05 Series Thin Film Resistors Part Number Explanation: MC TC05 Product Type Product Type Temperature Tolerance Ohmic Value Parking Type Packing Quantity Special Feature 25 B 1000 T 5 E Temperature Tolerance Ohmic Value Packing Type Packing Quantity Special Feature : : : : TC05 = 0805. 25 = 25PPM. B = 0.1%. Where R = Ohms = . K = Kiloohms = K. M = Megaohms = M. And replaces the decimal point. eg: 1R5 = 1.5. 4K7 = 4.7K. 6M8 = 6.8M. : T = T/R Packing. : 5 = 5000 pieces. : E = Lead free plating type. Stocked Values Tolerance Wattage (W) Preferred Value Range Range Value 1% 0.063 E96 1R5 - 1M 1% 0.1 E24 1R5 - 1M 1% 0.125 E24 10R - 1M Page <5> 02/05/08 V1.1 TC05 Series Thin Film Resistors Notes: International Sales Offices: AUSTRALIA - Farnell FINLAND - Farnell ITALY - Farnell SPAIN - Farnell Tel No: Tel No: Tel No: Tel No: ++61 1300 361 005 ++ 358 9 560 7780 ++ 39 02 93 995 200 901 20 20 80 Fax No: ++61 1300 361 225 Fax No: ++ 358 9 345 5411 Fax No: ++ 39 02 93 995 300 Fax No: 901 20 20 90 AUSTRIA - Farnell FRANCE - Farnell SWEDEN - Farnell Tel No: Tel No: Fax No: ++ 43 662 2180 670 Fax No: ++ 33 474 68 99 90 MALAYSIA - Farnell-Newark Tel No: ++ 60 3 7873 8000 Fax No: ++ 60 3 7873 7000 BELGIUM - Farnell GERMANY - Farnell NETHERLANDS - Farnell SWITZERLAND - Farnell Tel No: Tel No: Tel No: ++ 43 662 2180 680 ++ 33 474 68 99 99 Tel No: ++ 46 8 730 50 00 Fax No: ++ 46 8 83 52 62 Fax No: ++ 32 3 227 3648 Fax No: ++ 49 89 613 59 01 Fax No: ++ 31 30 241 7333 Tel No: ++ 44 204 64 64 Fax No: ++ 44 204 64 54 BRAZIL - Farnell-Newark HONG KONG - Farnell-Newark Tel No: ++ 852 2268 9888 NEW ZEALAND - Farnell UK - Farnell ++ 55 11 4066 9400 Tel No: Tel No: Fax No: ++ 55 11 4066 9410 Fax No: ++ 852 2268 9899 Fax No: 0800 90 80 81 Fax No: ++ 44 8701 200 201 CHINA - Farnell-Newark HUNGARY - Farnell NORWAY - Farnell UK - CPC Tel No: Tel No: Tel No: 800 146 70 ++ 44 8701 202 530 Tel No: ++ 32 3 475 2810 ++86 10 6238 5152 ++ 49 89 61 39 39 39 ++ 44 870 1200 208 ++ 31 30 241 7373 0800 90 80 80 ++ 44 8701 200 200 Fax No: ++86 10 6238 5022 Fax No: ++ 44 870 1200 209 Fax No: 800 146 76 ++ 44 8701 202 531 CZECH REPUBLIC - Farnell INDIA - Farnell PORTUGAL - Farnell Tel No: Tel No: Tel No: USA - Newark ++ 44 870 1200 208 ++ 44 870 1200 208 ++ 34 93 475 8804 Fax No: ++ 44 870 1200 209 Fax No: ++ 44 870 1200 209 Fax No: ++ 34 93 474 5288 DENMARK - Farnell IRELAND - Farnell RUSSIA - Farnell Tel No: Tel No: Tel No: ++ 45 44 53 66 44 Fax No: ++ 45 44 53 66 06 ++ 353 1 830 9277 ++ 44 870 1200 208 Fax No: ++ 44 870 1200 209 Fax No: ++ 353 1 830 9016 Tel No: export 800 463 9275 EXPORT - Farnell Tel No: ++ 44 8701 200 208 Fax No: ++ 44 8701 200 209 For enquiries from all other markets ESTONIA - Farnell ISRAEL - Farnell Tel No: Tel No: ++ 358 9 560 7780 Fax No: ++ 358 9 345 5411 SINGAPORE - Farnell-Newark Tel No: ++ 65 6788 0200 ++ 180 937 0015 Fax No: ++ 180 937 0014 Fax No: ++ 65 6788 0300 http://www.farnell.com http://www.newark.com http://www.cpc.co.uk Disclaimer This data sheet and its contents (the "Information") belong to the Premier Farnell Group (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. SPC Multicomp is the registered trademark of the Group. (c) Premier Farnell plc 2008. Page <6> 02/05/08 V1.1