TABLE OF
CONTENTS
Introduction to HARTING’s Selection Guide
HARTING’s selection guide on M8, M12, and 7/8” products is a user-friendly way to find a
solution that is compatible with any situation or application that a customer may need. It
also features the most up-to-date variations of HARTING’s circular connectors including
PushPull, Ha-VIS preLink®, and more.
Unlike a catalog, this guide incorporates links to other product or information pages that
can be helpful when choosing parts for a solution. There is also a Table of Contents button
on every page for convenience.
Not sure about a specific termination type on a connector?
Looking for the technical characteristics of a product?
Want a picture of the product?
Simply click on the blue title or part number and it will bring up the information that is
needed.
TABLE OF
CONTENTS
Table of Contents
Table of Contents
Introduction and Information
Introduction
Coding Options
Incomplete Part Numbers
Wire Termination Types
PushPull and Ha-VIS preLink®
Crimp Flange Connectors
M8 Connectors and Cable Assemblies
A-Code
Cable Assemblies
D-Code
Cable Assemblies
M12 Connectors and Cable Assemblies
A-Code
Cable Assemblies
B-Code
Cable Assemblies
D-Code
Cable Assemblies
L-Code
Cable Assemblies
X-Code
Cable Assemblies
7/8” Connectors
7/8” Connectors
Cable Assemblies
Connector Variations and Accessories
Ha-VIS preLink® Options
Cable Assemblies
PushPull Options
Stainless Steel (INOX) Options
Crimp Flange Options
Sensor Actuator Boxes and Options
Accessories
Other
Han® M23 Connectors
M12 Ethernet Switches
TABLE OF
CONTENTS
Introduction
HARTING’s extensive collection on M8 and M12 connectors fulfills today’s industrial
needs for connected communication and machinery devices. The product reliability
that HARTING offers can make a difference when choosing connectors vs. hard-wiring,
as HARTING can be the better choice in the long run.
The selection ranges from the standard M12 A-Code connectors to M8 D-Code
connectors, which are great for Ethernet applications in a more compact setting.
TABLE OF
CONTENTS
Coding Options
M8 A-Code M12 A-Code M12 D-Code
M12 B-Code
A-Code: Primarily used as connections for
sensors and actuators
B-Code: Connections for Profibus and Interbus
D-Code: Used for 100 MB Ethernet/IP
Connections
X-Code: For high-speed 10 Gigabit Ethernet
Connections
L-Code: Connections for power solutions, comes
at 63 V / 16A
7/8”: Used for power connections
7/8”M12 L-Code
M12 X-Code
There is a wide variety on the kinds of M8 and M12 connectors that exist, and coding
helps users see the differences between the connectors - but it is mainly used to prevent
incorrect mating. Below are the codings that HARTING offers as well as the mating faces
that are paired with each code.
TABLE OF
CONTENTS
Incomplete Part Numbers
In most cases, there will be incomplete part numbers for the cable assemblies in this
selection guide. HARTING offers various standard lengths that are already assembled,
and custom assembly lengths can be ordered as well.
For example, the “xxx” in the incomplete part number 21348300388xxx can be filled in
with whichever length extension that is desired, as shown through the standard length
table below.
The links that follow each product’s part number will be set to various lengths of the
assembly.
Standard Lengths for All Cable Assemblies are 0.5, 1.0, 1.5, 2.0, 5.0, 7.5, 10.0 meters
(Other lengths available upon request)
(xxx extension is 0.5m = "005", 1.0m = "010", 1.5m = "015", 2.0m = "020", 5.0m = "050", 7.5m =
"075", 10m = "100")
TABLE OF
CONTENTS
Wire Termination Types
HARAX® / IDC
HARTING’s own version of insulation-displacement contact, HARAX ®,
combines IDC with a wire guide element for conveniently producing on-site
field installing without special tools
Produces a gas-proof and vibration resistant connection
Follow this link for a quick video tutorial on HARAX ®
Screw
There are different designs for how a wire is held under the screw, including
using a set screw or a ferrule
Crimp
A conductor is inserted to a crimp contact and is retained by controlled
deformation
Provides gas-proof, shock, and vibration resistance
Follow this link for a video tutorial on crimp termination
The HARTING Crimp Termination
The HARTING HARAX® / IDC Termination
Screw Termination
So how exactly are wires connected to the connector? HARTING has three different
kinds of technologies that ensure a secure connection between the wire and connector.
TABLE OF
CONTENTS
PushPull and Ha-VIS preLink®
Push Pull
Ensures rapid, vibration-free Ethernet connections with just one click
Ideal for installation in tight spaces, such as railway applications
Click here to learn more about HARTING PushPull
The HARTING Ha-VIS preLink® Connector
The HARTING Ha-VIS preLink®
IDC Termination Block
The HARTING PushPull Technology
Ha-VIS preLink®
A technology from HARTING on Ethernet cabling
Combines the benefits of data networking technology with industry
requirements
Installation: preLink® separates cable connection and mating face, while a
assembly tool is required to press the cable and termination block together
Click here to learn more about HARTING preLink ®
TABLE OF
CONTENTS
M8 A-Code Connectors
HARAX
® / IDC Termination
HARTING Part Number
Description
Male
Female
3pin straight, unshielded, AWG 26
-22 (0.14-0.34mm2),
for
cable 2.5-5.1mm (S)
21021511305
21021512305
3pin straight, unshielded, AWG 27
-26 (0.08-0.14mm2),
for
cable 1.9-3.5mm (XS)
21021591305
4pin straight, unshielded, AWG 26
-22 (0.14-0.34mm2),
for
cable 2.5-5.1mm (S)
21021511405
21021512405
Screw Termination
3pin straight,
unshielded, max AWG 20, for cable 4-5.5mm 21023591301 21023592301
3pin angled,
unshielded, max AWG 20, for cable 4-5.5mm 21023593301 21023594301
3pin straight,
shielded, max AWG 20, for cable 4-5.5mm 21023691301 21023692301
4pin straight,
unshielded, max AWG 20, for cable 4-5.5mm 21023591401 21023592401
4pin angled,
unshielded, max AWG 20, for cable 4-5.5mm 21023593401 21023594401
4pin straight,
shielded, max AWG 20, for cable 4-5.5mm 21023691401 21023692401
Panel Feed Through (PFT) *
3pin Panel
Receptacle to flying leads, 0.5m 21023576305
4pin
Panel Receptacle to flying leads, 0.5m 21023576405
*These PFTs do not come with a lock nut –if needed, please use 21010000048
M8-S HARAX®
Female 3-pole M8 Screw Male 4-pole
Straight Unshielded M8 Panel Feed Through
Female 3-pole
TABLE OF
CONTENTS
M8 3-pole Straight Male
Cable Assembly PVC Gray M8 3-pole Straight Male
to Female PVC Gray
M8 A-Code 3pin Assemblies
**Check on available lengths
3pin
Overmolded Single Ended Assemblies
HARTING Part
Number
Description
PVC
Gray
PUR Black
3pin,
straight, male, xx.xm
21348000380xxx
21348000388xxx**
3pin,
straight, female, xx.xm
21348100380xxx
21348100388xxx
3pin
, angled, male, xx.xm
21348200380xxx**
3pin,
angled, female, xx.xm
21348300380xxx
21348300388xxx
3pin
Overmolded Double Ended Assemblies
3pin, straight male to straight female,
xx.xm
21348081380xxx
21348081388xxx
3pin, straight male to angled female,
xx.xm
21348083380xxx
21348083388xxx
3pin, angled male to angled
female, xx.xm
21348283481xxx**
Standard Lengths for Cable Assemblies are 0.5, 1.0, 1.5, 2.0, 5.0, 7.5, 10.0 meters
(Other lengths available upon request)
(xxx extension is 0.5m = "005", 1.0m = "010", 1.5m = "015", 2.0m = “020”, 5.0m = "050",
7.5m = “075”, 10m = "100“, etc.)
TABLE OF
CONTENTS
**Check on available lengths
M8 4-pole Straight Male to
Female PUR Black
M8 4-pole Angled Female Cable
Assembly PUR Gray
M8 A-Code 4pin Assemblies
4pin
Overmolded Single Ended Assemblies
HARTING Part
Number
Description
PVC
Gray
PUR Black
4pin
, straight, male, xx.xm
21348000481xxx
4pin
, straight, female, xx.xm
21348100481xxx
21348100489xxx
4pin
, angled, female, xx.xm
21348300481xxx
21348300489xxx
4pin
Overmolded Double Ended Assemblies
4pin, straight male to straight female,
xx.xm
21348081481xxx
21348081489xxx
4pin, straight male to angled female,
xx.xm
21348083481xxx**
21348083489xxx
**
4
pin, straight male to straight male, xx.xm
21348080489xxx**
4pin,
straight female to M12 A-code straight male,
xx.xm
**
21348184489xxx
**
Standard Lengths for Cable Assemblies are 0.5, 1.0, 1.5, 2.0, 5.0, 7.5, 10.0 meters
(Other lengths available upon request)
(xxx extension is 0.5m = "005", 1.0m = "010", 1.5m = "015", 2.0m = “020”, 5.0m = "050",
7.5m = “075”, 10m = "100“, etc.)
TABLE OF
CONTENTS
PCB Mount Connectors using THT (Through-Hole
Technology) Termination HARTING Part Number
Description Female
4pin straight PCB mount, shielded version, IP67, (4mm height) 21420000005
4pin straight PCB mount, shielded version, IP67, (8mm height) 21420000014
4pin straight PCB mount (w/o housing), shielded version, IP67 21420000006
M8 Housing, front mounting, M10x1, 9mm height 21410000016
M8 Housing, front mounting, M10x1, 13mm height 21410000017
M8 PCB mount Female
4-pole Straight, Shielded
M8 PCB Female 4-pole Straight,
Shielded, 4mm height
Click here to learn more about M8 D-Code Connectors
M8 D-Code Connectors
TABLE OF
CONTENTS
4pin Overmolded Single Ended Shielded Assemblies HARTING Part Number
4pin straight male, PVC, xx.xm 2134C700405xxx
4pin straight male, PUR, xx.xm 2134C700477xxx
4pin Overmolded Double Ended Shielded Assemblies
4pin straight male to straight male, PVC, xx.xm 2134C7C7405xxx
4pin straight male to straight male, PUR, xx.xm 2134C7C7477xxx
M8 D-Code Assemblies
M8 4-pole Straight Male Single
Ended Cable Assembly PVC
Click here to learn more about M8 D-Code Connectors
Standard Lengths for Cable Assemblies are 0.5, 1.0, 1.5, 2.0, 5.0, 7.5, 10.0 meters
(Other lengths available upon request)
(xxx extension is 0.5m = "005", 1.0m = "010", 1.5m = "015", 2.0m = “020”, 5.0m = "050",
7.5m = “075”, 10m = "100“, etc.)
TABLE OF
CONTENTS
HARAX® / IDC Termination HARTING Part Number
Description Male Female
3pin, unshielded, AWG22-18, for cable 6-8mm (pins 1,3,4)
21032121306
21032122306
3pin, unshielded, AWG22-18, for cable 6-8mm (pins 3,4,5)
21032121400
21032122400
3pin, unshielded, AWG26-22, for cable 2.9-5.1mm (pins 1,3,4
)
21031111305
21031112305
4pin, unshielded,AWG26-22, for cable 2.9-5.1mm (S)
21031111405
21031112405
4pin, unshielded, AWG22-18, for cable 6-8mm (L)
21032121305
21032122305
4pin, unshielded, AWG22-18, for cable 7-8.8mm (L)
21032121407
21032122407
4pin, unshielded, angled, AWG24/7-20, cable 4-5.1mm
21011405081
21011405091
4pin, shielded, AWG26-22, for cable 4.5-8.8mm (L)
21032211405
21032212405
4pin, shielded, slim design, AWG 22, for cable 5.7-8.8mm
21033221400
21033222400
5pin, unshielded, AWG22-20, for cable 6-8mm (L)
21032721505
21032722505
8pin, shielded, AWG 26-22, for cable 4-8mm
21031211801
21031212801
M12 HARAX®
Male 4-pole
M12 HARAX®
Female 4-pole Angled M12 HARAX® Male
8-pole shielded
Click here for PushPull options
M12 A-Code IDC Connectors
TABLE OF
CONTENTS
Screw Termination HARTING Part Number
Description Male Female
4pin, unshielded, straight, max. AWG16, for cable 4-8mm 21033191401 21033192401
4pin, unshielded, angled, max. AWG16, for cable 4-8mm 21033193401 21033194401
4pin, shielded, straight, max. AWG16, for cable 4-8mm 21033291401 21033292401
5pin, unshielded, angled, max. AWG16, for cable 4-8mm 21033193501 21033194501
5pin, unshielded, straight, max. AWG16, for cable 4-8mm 21033191501 21033192501
5pin, shielded, straight, max. AWG16, for cable 4-8mm 21033291501 21033292501
8pin, unshielded, straight, max. AWG20, for cable 4-8mm 21033191801 21033192801
8pin, unshielded, angled, max. AWG20, for cable 4-8mm 21033193801 21033194801
8pin, shielded, straight, max. AWG20, for cable 4-8mm 21033291801 21033292801
Crimp Termination
4/5pin, shielded, slim design, straight, for cable 5.7-8.8mm 21038211505 21038212505
4/5pin, shielded, slim design, angled, for cable 5.7-8.8mm 21038213505 21038214505
8pin, shielded, slim design, straight, for cable 5.7-8.8mm 21038211805 21038212805
8pin, shielded, slim design, angled, for cable 5.7-8.8mm 21038213805 21038214805
M12 Screw Female 4-
pole Straight Shielded
M12 Screw Male
4-pole Angled
M12 Crimp Male 8-pole
Straight Slim Design Shielded
Click here for PushPull options
M12 A-Code Screw and Crimp Connectors
TABLE OF
CONTENTS
HARAX® / IDC Termination HARTING Part Number
Description Male Female
4pin male, shielded, PFT, AWG26-22, for cable 4.5-8.8mm
21033211425
21033212425
Crimp Termination
4/5pin female shielded, PFT, slim design, for cable 5.7-
8.8mm** 21038212525
8pin female shielded, PFT, slim design, straight, for cable
5.7-8.8mm** 21038212825
M12 HARAX® Male 4-
pole Shielded M12 Crimp Female 8-pole
Shielded
**Compatible with PushPull
Click here for Crimp Contacts and Tooling
M12 A-Code Connectors –Panel Feed Through
TABLE OF
CONTENTS
Assembly to Flying Leads (with lock nut) Male Female
4pin PFT to 0.5m AWG20 flying leads 21033111402
21033112400
5pin PFT to 0.5m AWG20 flying leads 21033111501
21033112501
Assembly to Flying Leads (without lock nut)
If lock nut is needed, please use 21010000018 HARTING Part Number
3pin female PFT to 0.5m AWG24 flying leads, PVC (pins 1,3,4
)
21033176305
4pin female PFT to 0.5m AWG24 flying leads, PVC 21033176405
5pin female PFT to 0.5m AWG24 flying leads, PVC 21033176505
8pin female PFT to 0.5m AWG24 flying leads, PVC 21033176805
12pin female PFT to 0.5m AWG26 flying leads, PVC 21033532C00
M12 Assembly to Flying
Leads Female 3-pole M12 Assembly to Flying
Leads Female 12-pole
M12 A-Code Connectors –Panel Feed Through
TABLE OF
CONTENTS
IP67 Versions HARTING Part Number
Description Male Female
4pin straight panel feed through PCB mount, IP67
21033211420
21033216420
5pin straight panel feed through PCB mount, IP67
21033211520
21033216520
8pin angled PCB mount, shielded, front mounting, IP67 21033214801
12pin angled PCB mount, shielded, front mounting, IP67 21033214201
IP67 THR (Through-Hole Reflow)
4pin angled PCB mount, shielded, THR, IP67
21033213401
21033214401
5pin angled PCB mount, shielded, THR, IP67
21033213501
21033214501
IP20 Versions
4pin straight panel feed through PCB mount, IP20
21033211410
21033216410
5pin straight panel feed through PCB mount, IP20
21033211510
21033216510
M12 PCB Mount Male
4-pole Straight IP20 M12 PCB Mount Female
4-pole Angled Shielded
M12 A-Code Connectors –PCB Mounts
TABLE OF
CONTENTS
Through-Hole PCB Mounts HARTING Part Number
Description Male Female
4pin straight PCB mount (w/o housing), screened version** 21033211418
5pin straight PCB mount (w/o housing), screened version** 21033211518
21033212518
5pin straight PCB mount, screened version + rear mount
housing 21033211530
21033212530
8pin straight PCB mount (w/o housing), screened version** 21033211818
21033212818
8pin straight PCB mount, screened version + rear mount
housing 21033211830
21033212830
M12 PCB Mount Male 5-
pole Screened Version
M12 PCB Mount Male 8-pole
Screened Version + Rear
Mount Housing
SMT (Surface Mount Technology) –without housing
4pin straight, SMT PCB mount, unshielded 21033111415
21033112410
4pin straight, SMT PCB mount, unshielded, reel of 75pieces 21033111416
21033112411
5pin straight, SMT PCB mount, unshielded 21033111515
21033112510
5pin straight, SMT PCB mount, unshielded, reel of 75pieces 21033111516
21033112511
8pin straight, SMT PCB mount, unshielded 21033111815
21033112810
8pin straight, SMT PCB mount, unshielded, reel of 75pieces 21033111816
21033112811
8pin straight, SMT PCB mount, shielded 21033211802
21033212803
8pin straight, SMT PCB mount, shielded, reel of 75pieces 21033211803
21033212802
**Compatible with PushPull
Click here for Housing and SMT Housing options
M12 PCB Mount SMT
Male 4-pole Straight
M12 A-Code Connectors –PCB Mounts
TABLE OF
CONTENTS
M12 3-pole Single Ended
Overmolded Angled PUR Black M12 3-pole Double Ended
Overmolded Straight
M12 A-Code 3pin Assemblies
3pin
Overmolded Single Ended Assemblies
HARTING Part
Number
Description
PVC
Gray
PUR Black
3pin
, straight, male, xx.xm
21348400383xxx
21348400390xxx**
3pin,
straight, female, xx.xm
21348500383xxx
21348500390xxx
3pin,
angled, female, xx.xm
21348700383xxx
21348700390xxx
3pin
Overmolded Double Ended Assemblies
3pin
, straight male to straight female, xx.xm
21348485383xxx
21348485390xxx
**Check on available lengths
Standard Lengths for Cable Assemblies are 0.5, 1.0, 1.5, 2.0, 5.0, 7.5, 10.0 meters
(Other lengths available upon request)
(xxx extension is 0.5m = "005", 1.0m = "010", 1.5m = "015", 2.0m = “020”, 5.0m = "050",
7.5m = “075”, 10m = "100“, etc.)
TABLE OF
CONTENTS
M12 4-pole Double Ended
Overmolded Straight to Angled
M12 A-Code 4pin Assemblies
4pin Overmolded Double Ended Assemblies
4pin, straight male to straight female, xx.xm
21348485484xxx
21348485491xxx
4pin, straight male to angled female, xx.xm
21348487484xxx
21348487491xxx
4pin, straight male to straight male, xx.xm
21348484484xxx**
**Check on available lengths
See the Sensor Actuator Boxes page for more M12 A-Code 4pin assemblies
4pin Overmolded Single Ended Assemblies
HARTING Part
Number
Description
PVC
Gray
PUR Black
4pin
, straight, male, xx.xm
21348400484xxx
21348400491xxx**
4pin
, straight, female, xx.xm
21348500484xxx**
21348500491xxx**
4pin
, angled, male, xx.xm
21348600484xxx
21348600491xxx
4pin
, angled, female, xx.xm
21348700484xxx
21348700491xxx
Standard Lengths for Cable Assemblies are 0.5, 1.0, 1.5, 2.0, 5.0, 7.5, 10.0 meters
(Other lengths available upon request)
(xxx extension is 0.5m = "005", 1.0m = "010", 1.5m = "015", 2.0m = “020”, 5.0m = "050",
7.5m = “075”, 10m = "100“, etc.)
M12 4-pole Double Ended
Overmolded Straight to Straight
TABLE OF
CONTENTS
M12 5-pole Single Ended Male
Straight PVC Gray
M12 5-pole Single Ended Female
Angled PVC Gray
M12 A-Code 5pin Assemblies
5pin Overmolded Single Ended Assemblies
HARTING Part
Number
Description
PVC
Gray
PUR Black
5pin
, straight, male, xx.xm
21348400585xxx
21348400592xxx**
5pin
, straight, female, xx.xm
21348500585xxx
21348500592xxx**
5pin
, angled, female, xx.xm
21348700585xxx
21348700592xxx**
5pin
Overmolded Double Ended Assemblies
5pin, straight male to straight female, xx.xm
21348485585xxx
21348485592xxx**
**Check on available lengths
Standard Lengths for Cable Assemblies are 0.5, 1.0, 1.5, 2.0, 5.0, 7.5, 10.0 meters
(Other lengths available upon request)
(xxx extension is 0.5m = "005", 1.0m = "010", 1.5m = "015", 2.0m = “020”, 5.0m = "050",
7.5m = “075”, 10m = "100“, etc.)
TABLE OF
CONTENTS
8pin
Overmolded Double Ended Assemblies
8pin
, straight male to straight female, xx.xm
21348485882xxx
21348485870xxx
8pin
, straight male to straight male, xx.xm
21348484882xxx
21348484870xxx**
M12 8-pole Double Ended
Overmolded Straight
M12 8-pole Single Ended
Overmolded Straight
M12 A-Code 8pin Assemblies
8pin Overmolded Single Ended Assemblies
HARTING Part
Number
Description
PVC
Gray
PUR Black
8pin
, straight, male, xx.xm
21348400882xxx
21348400870xxx**
8pin
, straight, female, xx.xm
21348500882xxx
8pin
, angled, female, xx.xm
21348700882xxx**
Standard Lengths for Cable Assemblies are 0.5, 1.0, 1.5, 2.0, 5.0, 7.5, 10.0 meters
(Other lengths available upon request)
(xxx extension is 0.5m = "005", 1.0m = "010", 1.5m = "015", 2.0m = “020”, 5.0m = "050",
7.5m = “075”, 10m = "100“, etc.)
TABLE OF
CONTENTS
12pin Overmolded Double Ended Assemblies
12pin, straight male to straight female, xx.xm
21348485C79xxx
21348485C78xxx
12pin, straight male to angled female, xx.xm 21348487C78xxx
12pin, angled male to angled female, xx.xm 21348687C78xxx
M12 12-pole Double Ended Overmolded
Angled Male to Angled Female M12 12-pole Single Ended
Overmolded Straight PVC Gray
M12 A-Code 12pin Assemblies
12pin
Overmolded Single Ended Assemblies
HARTING Part
Number
Description
PVC
Gray
PUR Black
12pin
, straight, male, xx.xm
21348400C79xxx
12pin
, straight, female, xx.xm
21348500C79xxx
21348500C78xxx
12pin
, angled, male, xx.xm
21348600C79xxx
12pin
, angled, female, xx.xm
21348700C79xxx
21348700C78xxx
Standard Lengths for Cable Assemblies are 0.5, 1.0, 1.5, 2.0, 5.0, 7.5, 10.0 meters
(Other lengths available upon request)
(xxx extension is 0.5m = "005", 1.0m = "010", 1.5m = "015", 2.0m = “020”, 5.0m = "050",
7.5m = “075”, 10m = "100“, etc.)
TABLE OF
CONTENTS
4pin Overmolded Single Ended HARTING Part Number
4pin, straight female, Nexans Flamex MAZ PUR (4x0.5mm2),
xx.xm 210351224yy
5pin, Press and Go, straight male, Tronic-CY (LiY-CY) PVC
(4xAWG20), xx.xm 21331000502xxx
4pin Double Ended
Slim Design,
4pin, straight male to straight male, EtherRail Flex
(4xAWG22/7), xx.xm 21330202401xxx
M12 A-Code Ha-VIS EtherRail® Assemblies
Lengths for EtherRail® Cable Assemblies are
0.5, 1.0, 1.5, 2.0, 5.0, 7.5, 10.0, 15.0, 20.0 meters
(Other lengths available upon request)
(xxx extension is 0.5m = "005", 1.0m = "010", 1.5m = "015", 5.0m = "050", 10m = "100“,
15m = "150“, 20m = “200“, etc.)
TABLE OF
CONTENTS
HARAX® / IDC Termination HARTING Part Number
Description Male Female
2pin, shielded, AWG 24-22, for cable 5-8.8mm (L) 21032411301 21032412301
Screw Termination
5pin, straight, shielded, max. AWG16, for cable 4-8mm 21033491501 21033492501
Crimp Termination
5pin, shielded 21038411505
21038412505
Click here for Crimp Contacts and Tooling
M12 HARAX®
2-pole Male Shielded M12 Screw 5-pole
Male Shielded M12 Crimp
5-pole Female Shielded
M12 B-Code Connectors
TABLE OF
CONTENTS
HARAX® / IDC Termination HARTING Part Number
Description Male Female
2pin, shielded, AWG 24-22, for cable 7-8.8mm 21033411425 21033412425
Crimp Termination
5pin, shielded, crimp 21038411525 21038412525
Flying Leads
4pin, PFT, to 0.5m AWG24 flying leads, PVC* 21033386405
5pin, PFT to 0.25m AWG20 flying leads* 21033391301 21033392301
Male to Female
5pin male/female PFT 21033301300
*This PFT does not come with a lock nut –if needed, please use 21010000018
Click here for Crimp Contacts and Tooling
M12 HARAX®
2-pole Male Shielded
M12 PFT
Flying Leads 5-pole Male M12 PFT
5-pole Male / Female
M12 B-Code Connectors –Panel Feed Through
TABLE OF
CONTENTS
IP67 Degree of Protection HARTING Part Number
Description Male Female
5pin straight panel feed through PCB mount, IP67
21033411505
21033412505
Screened Version
5pin, straight PCB mount (w/o housing), screened version**
21033411518
21033412518
Other
Male moving load 4pin connector 21030301300
5pin T-Coupler Profibus 21033416401
M12 Male moving load
4-pole Connector
**Need housing? Click here to see housing options
M12 Male 5-pole Straight
PFT PCB mount IP67
M12 B-Code Connectors –PCB Mounts and Other
TABLE OF
CONTENTS
M12 2-pole Male Single
Ended Straight M12 2-pole Male
Single Ended Angled
M12 B-Code Standard Assemblies
2pin
Overmolded Single Ended Assemblies
HARTING Part Number
Description
PVC Violet
PUR Violet
2pin, straight, male, xx.xm 21348800486xxx
2pin, angled, male, xx.xm 21349000486xxx
2pin, straight, female, xx.xm 21348900486xxx 21348900487xxx
2pin, angled, female, xx.xm 21349100486xxx 21349100487xxx
2pin Overmolded Double Ended Assemblies
2pin, straight male to straight female, xx.xm 21348889486xxx 21348889487xxx
2pin, angled male to angled female, xx.xm 21349091487xxx
Standard Lengths for Cable Assemblies are 0.5, 1.0, 1.5, 2.0, 5.0, 7.5, 10.0 meters
(Other lengths available upon request)
(xxx extension is 0.5m = "005", 1.0m = "010", 1.5m = "015", 2.0m = “020”, 5.0m = "050",
7.5m = “075”, 10m = "100“, etc.)
TABLE OF
CONTENTS
HARAX® / IDC Termination HARTING Part Number
Description Male Female
4pin, shielded, slim design, AWG 22, for cable 5.7-8.8mm 21033821400 21033822400
4pin, shielded, M12-L, AWG 26-22, for cable 4.5-
8.8mm (L)
21032811405 21032812405
4pin, shielded, M12-L, AWG 22-18, for cable 4.5-
8.8mm (L)
21032821405 21032822405
Screw Termination
4pin straight, shielded, max. AWG16, for cable 4-8mm 21033891402 21033892402
Crimp Termination
4pin, shielded, slim design, straight, for cable 5.7-8.8mm 21038811405 21038812405
4pin, shielded, slim design, angled, for cable 5.7-8.8mm 21038813405 21038814405
4pin male shielded, crimp, for conduit M17 21038821411 21038822411
M12 HARAX® Female
4-pole straight shielded
M12 Screw Male 4-pole
straight shielded M12 Crimp Male 4-pin
Slim Design Straight
Click here for PushPull options
Click here for Crimp Contacts and Tooling
Click here for preLink® options
M12 D-Code Connectors
TABLE OF
CONTENTS
HARAX® / IDC Termination HARTING Part Number
Description Male Female
4pin, shielded, AWG 26-22 21033811425 21033812425
Crimp Termination
4pin shielded, slim design, straight, for cable 5.5-8.8mm ** 21038812425
Flying Leads
4pin, panel feed through to 0.5m AWG22 flying leads,
PVC*
21033752400
4pin panel feed through (M16) to 0.5m AWG22 flying
leads
(comes with Lock Nut) 21033711403 21033712403
*This PFT does not come with a lock nut –if needed, please use 21010000018
Click here for Crimp Contacts and Tooling
**Compatible with PushPull
M12 HARAX® Male 4-
pole Shielded
M12 Crimp Female 4-pole
Shielded Slim Design M12 Flying Leads
Female 4-pole
M12 D-Code Connectors –Panel Feed Through
TABLE OF
CONTENTS
Cables coming out of the back HARTING Part Number
4pin female PFT (M16) to 360mm flex cable 2x2xAWG26/7 21033836407
Single Ended Cable Assembly, female panel mount, EtherRail
Flex (4xAWG22/7), 0.7m 21332100401007
4pin female PFT (PG9) to 700mm flex cable 2x2xAWG26/7 21033836405
Other
4pin female to RJ45 panel feed through angled, 4poles 21033814401
4pin female to RJ45 panel feed through straight, 4poles 21033812401
4pin gender changer female/female** 21033816403
M12 Wall Mount Bracket 21010000036
**Compatible with PushPull
M12 4-pole to RJ45
Cable Assembly M12 4-pole Female
to RJ45 Straight
M12 4-pole Gender
Changer
M12 D-Code Connectors –Panel Feed Through
TABLE OF
CONTENTS
IP67 Degree of Protection HARTING Part Number
4pin male, straight panel feed through (PFT) PCB mount 21033711400
4pin female, straight panel feed through (PFT) PCB mount 21033712415
4pin female, straight panel feed through (PFT) PCB mount 21033816420
4pin female, angled PCB mount w/o fixing hole (exit right) 21033814430
4pin female, angled PCB mount w/o fixing hole (exit down) 21033814431
4pin female, angled PCB mount with fixing hole (exit right) 21033814432
4pin female, angled PCB mount with fixing hole (exit down) 21033814433
4pin female, angled PCB mount w/o fixing hole** 21033814436
4pin female, angled PCB mount with fixing hole** 21033814437
M12 4-pole Male
Straight PFT IP67 M12 4-pole Female Angled
w/o fixing hole IP67
**Compatible with PushPull
M12 D-Code Connectors –PCB Mounts
TABLE OF
CONTENTS
IP20 Degree of Protection HARTING Part Number
4pin female straight panel feed through (PFT) PCB mount 21033816410
4pin female, angled PCB mount w/o fixing hole (exit right) 21033814410
4pin female, angled PCB mount w/o fixing hole (exit down) 21033814411
4pin female, angled PCB mount with fixing hole (exit right) 21033814412
4pin female, angled PCB mount with fixing hole (exit down) 21033814413
4pin female, angled PCB mount w/o fixing hole** 21033814434
4pin female, angled PCB mount with fixing hole** 21033814435
**Compatible with PushPull
M12 4-pole Female
Straight PFT IP20
M12 4-pole Female Angled
w/o fixing hole IP20
M12 D-Code Connectors –PCB Mounts
TABLE OF
CONTENTS
Through-Hole Reflow Termination (THR) HARTING
Part Number
4pin female angled PCB mount, shielded, rear-mounting, THR
termination 21033814440
PCB Mounts
4pin male straight PCB mount (w/o housing), shielded version 21033811418
4pin female straight PCB mount (w/o housing), shielded version 21033812418
4pin male straight PCB mount, shielded version, with rear mount
housing (individual piece) 21033811430
4pin male straight PCB mount, shielded version, with front mount
housing (individual piece) 21033811431
4pin female straight PCB
mount, shielded version, with rear mount
housing (individual piece) 21033812430
4pin female straight PCB
mount, shielded version, with front mount
housing (individual piece) 21033812431
Other
4pin female straight, SMT (surface mount technology) PCB
mount,
shielded* 21033812404
4pin female straight, SMT PCB mount, shielded, reel of 75pieces* 21033812405
M12 4-pole Female Angled
THR rear-mounting
M12 4-pole Male Straight
with rear mount housing
M12 D-Code Connectors –PCB Mounts
TABLE OF
CONTENTS
SMT PCB Mounts with transformers, shielded HARTING Part Number
4pin female straight, (w/o housing) 21033812410
4pin female straight, PoE (Power over Ethernet) enabled (w/o
housing) 21033812411
4pin female straight, PoE enabled, (w/ housing 21033012006) 21033812421
4pin female angled, (w/o housing) 21033814420
4pin female angled, PoE enabled, (w/o housing) 21033814421
4pin female angled, PoE enabled, (w/ housing 21033012006) 21033814422
*For housing, please use 21410000010 or 21410000013
To learn more about M12 PCB Mounts with transformers, click here
M12 4-pole Female Angled
SMT with transformer M12 4-pole Female Straight SMT
with transformer, PoE enabled
M12 D-Code Connectors –PCB Mounts
TABLE OF
CONTENTS
4pin
Overmolded Double Ended Assemblies
4pin, straight male to straight female, green, xx.xm
21349293405xxx
21349293477xxx
4pin, straight male to straight male, green, xx.xm
21349292405xxx
21349292477xxx
4pin, angled male to angled male, green, xx.xm
21349494405xxx
21349494477xxx
M12 4-pole Single Ended
Overmolded Straight M12 4-pole Single Ended
Overmolded Angled
M12 D-Code Standard Assemblies
4pin
Overmolded Single Ended Assemblies
HARTING Part Number
Description
PVC Green
PUR
Green
4pin, straight, male, xx.xm
21349200405xxx
21349200477xxx
4pin, straight, female, xx.xm
21349300405xxx
21349300477xxx
4pin, angled, male, xx.xm
21349400405xxx
21349400477xxx
4pin, angled, female, xx.xm
21349500405xxx
21349500477xxx
Standard Lengths for Cable Assemblies are 0.5, 1.0, 1.5, 2.0, 5.0, 7.5, 10.0 meters
(Other lengths available upon request)
(xxx extension is 0.5m = "005", 1.0m = "010", 1.5m = "015", 2.0m = “020”, 5.0m = "050",
7.5m = “075”, 10m = "100“, etc.)
TABLE OF
CONTENTS
4pin
Overmolded Single Ended –PVC Black
HARTING Part Number
Description
Straight
Angled
Male to flying leads 4xAWG22/7, 1.0m
09472200002
09478000002
Male to flying leads 4xAWG22/7, 1.5m
09472200003
09478000003
Male to flying leads 4xAWG22/7, 3.0m
09472200005
09478000005
Male to flying leads 4xAWG22/7, 5.0m
09472200006
09478000006
Male to flying leads 4xAWG22/7, 7.5m
09472200022
09478000022
Male to flying leads 4xAWG22/7, 10.0m
09472200011
09478000011
Male to flying leads 4xAWG22/7, 20.0m
09472200013
09478000013
4pin
Overmolded Double Ended –PVC Black
Description
Straight (both
males)
Angled (both
males)
Male to male, 4xAWG22/7, 1.0m
09472222002
09478080002
Male to male, 4xAWG22/7, 1.5m
09472222003
09478080003
Male to male, 4xAWG22/7, 3.0m
09472222005
09478080005
Male to male, 4xAWG22/7, 5.0m
09472222006
09478080006
Male to male, 4xAWG22/7, 7.5m
09472222022
09478080022
Male to male, 4xAWG22/7, 10.0m
09472222011
09478080011
Male to male, 4xAWG22/7, 20.0m
09472222013
09478080013
M12 4-pole Single Ended
Outdoor Overmolded Straight M12 4-pole Double Ended
Outdoor Overmolded Straight
M12 D-Code Outdoor Assemblies
TABLE OF
CONTENTS
4pin
Overmolded Single Ended –SERCOS Red HARTING Part Number
Description Straight
Male to flying leads 4xAWG22/7, 1.0m 09472200002018
Male to flying leads 4xAWG22/7, 1.5m 09472200003018
Male to flying leads 4xAWG22/7, 3.0m 09472200005018
Male to flying leads 4xAWG22/7, 5.0m 09472200007018
Male to flying leads 4xAWG22/7, 7.5m 09472200018018
Male to flying leads 4xAWG22/7, 10.0m 09472200012018
Male to flying leads 4xAWG22/7, 20.0m 09472200014018
4pin
Overmolded Double Ended –SERCOS Red
Description Straight (both males)
Male to male, 4xAWG22/7, 1.0m 09472222002018
Male to male, 4xAWG22/7, 1.5m 09472222003018
Male to male, 4xAWG22/7, 3.0m 09472222005018
Male to male, 4xAWG22/7, 5.0m 09472222007018
Male to male, 4xAWG22/7, 7.5m 09472222018018
Male to male, 4xAWG22/7, 10.0m 09472222012018
Male to male, 4xAWG22/7, 20.0m 09472222014018
M12 D-Code Outdoor Assemblies
TABLE OF
CONTENTS
M12 4-pole Straight Male to RJ45
PUR Green
4pin
Overmolded Double Ended –M12 to RJ45
HARTING Part Number
Description
PVC Black Outdoor
Cable
PUR Green
Trailing Cable
Straight male to RJ45 Cat5, 4xAWG22/7, 1.0m
09457005063
09457005022
Straight male to RJ45 Cat5, 4xAWG22/7, 1.5m
09457005023
Straight male to RJ45 Cat5, 4xAWG22/7, 3.0m
09457005066
09457005025
Straight male to RJ45 Cat5, 4xAWG22/7, 5.0m
09457005068
09457005027
Straight male to RJ45 Cat5, 4xAWG22/7, 10m
09457005073
09457005051
Straight male to RJ45 Cat5, 4xAWG22/7, 20m
09457005075
09457005053
M12 D-Code RJ45 Assemblies
TABLE OF
CONTENTS
Overmolded Single Ended
HARTING Part Number
Straight male, EtherRail® Flex (4xAWG22/7), Cat5 Black xx.xm 09482200011xxx
Straight male, EtherRail® Flex (4xAWG22/7), Cat5 Blue xx.xm 21333900413xxx
Straight male, EtherRail® UltraFlex (4xAWG22/19), xx.xm 09482200012xxx
A
ngled male, EtherRail® Flex (4xAWG22/7), xx.xm 09488000011xxx
A
ngled male, EtherRail® Ultra Flex (4xAWG22/19), xx.xm 09488000012xxx
Single Ended Press & Go
Straight male, EtherRail® Flex (4xAWG22/7), xx.xm 21330900401xxx
Straight male, EtherRail® UltraFlex (4xAWG22/19), xx.xm 21330900400xxx
Straight female, EtherRail® Flex (4xAWG22/7), xx.xm 21331600401xxx
M12 D-Code Ha-VIS EtherRail® Assemblies
M12 4-pole Single Ended
Straight EtherRail Cat 5 Black M12 4-pole Single Ended
Straight EtherRail Cat 5 Blue
Lengths for EtherRail® Cable Assemblies are
0.5, 1.0, 1.5, 2.0, 5.0, 7.5, 10.0, 15.0, 20.0 meters
(Other lengths available upon request)
(xxx extension is 0.5m = "005", 1.0m = "010", 1.5m = "015", 5.0m = "050", 10m = "100“,
15m = "150“, 20m = “200“, etc.)
TABLE OF
CONTENTS
Overmolded Double Ended
HARTING Part Number
Straight male to straight male, EtherRail® Flex (4xAWG22/7),
xx.xm 09482222011xxx
Straight male to straight male, EtherRail® UltraFlex
(4xAWG22/19), xx.xm 09482222012xxx
Angled
male to angled male, EtherRail® Flex (4xAWG22/7),
xx.xm
09488080011xxx
Angled male to angled male, EtherRail®
Ultra Flex (4xAWG22/19),
xx.xm 09488080012xxx
Double Ended Press & Go
Press&Go, straight male to straight male, EtherRail® Flex
(4xAWG22/7), xx.xm 21330909401xxx
PushPull Press&Go, straight male to straight male, EtherRail®
Flex (4xAWG22/7), xx.xm** 21332323401xxx
**Compatible with PushPull
M12 D-Code Ha-VIS EtherRail® Assemblies
Lengths for EtherRail® Cable Assemblies are
0.5, 1.0, 1.5, 2.0, 5.0, 7.5, 10.0, 15.0, 20.0 meters
(Other lengths available upon request)
(xxx extension is 0.5m = "005", 1.0m = "010", 1.5m = "015", 5.0m = "050", 10m = "100“,
15m = "150“, 20m = “200“, etc.)
TABLE OF
CONTENTS
Panel Feed Through (PFT)
HARTING Part Number
Single Ended, female panel mount, EtherRail®
Flex (4xAWG22/7),
xx.xm 21332100401xxx
PushPull Single Ended, female panel mount, EtherRail® Flex
(4xAWG22/7), xx.xm** 21332200401xxx
Double Ended, female crimp panel mount to male crimp,
EtherRail® Flex (4xAWG22/7), xx.xm 21331211401xxx
RJ45 Assemblies
Overmolded, straight male M12 to RJ45, EtherRail® Flex
(4xAWG22/7), xx.xm 09480222011xxx
Straight female Press and Go M12 to Overmolded RJ45,
EtherRail® Flex (4xAWG22/7), xx.xm 09482402711xxx
**Compatible with PushPull
M12 D-Code Ha-VIS EtherRail® Assemblies
Lengths for EtherRail® Cable Assemblies are
0.5, 1.0, 1.5, 2.0, 5.0, 7.5, 10.0, 15.0, 20.0 meters
(Other lengths available upon request)
(xxx extension is 0.5m = "005", 1.0m = "010", 1.5m = "015", 5.0m = "050", 10m = "100“,
15m = "150“, 20m = “200“, etc.)
M12 4pin Straight Male to RJ45
TABLE OF
CONTENTS
HARAX® / IDC Termination HARTING Part Number
Description Male Female
4+PE pin, shielded 21032961505 21032962505
Crimp Termination
4+PE pin, shielded 21038961505 21038962505
Panel Feed Throughs (Flying Leads)
4+PE pin PFT to 0.3m 1.5mm2 (AWG16) flying leads 21035961505 21035962505
4+PE pin PFT to 0.3m 2.5mm2 (AWG14) flying leads 21035991505 21035992505
PCB Mounts
4+PE pin female PCB mount for rear mounting 21033962530
4+PE pin female PCB mount for front mounting 21033962531
4+PE pin male straight PCB mount (w/o housing)** 21033961505
M12 HARAX®
5-pole Male M12 PCB Mount 5-pole
Female front mounting
M12 PFT 5-pole
Male AWG16
**Need housing? Click here to see housing options
Click here for Crimp Contacts and Tooling
M12 L-Code Connectors, PFTs, PCB Mounts
TABLE OF
CONTENTS
5pin
Single Ended Assemblies
HARTING Part Number
Description
Unshielded
Shielded
4+PE, Female, 16AWG. PVC grey, xx.xm 2133A700523xxx 2133A700518xxx
4+PE, Female, 14AWG. PVC grey, xx.xm 2133A700524xxx 2133A700519xxx
5pin Double Ended Assemblies
4+PE, Female to Male, 16AWG. PVC grey, xx.xm
2133A7A8523xxx
2133A7A8518xxx
4+PE, Female to Male, 14AWG. PVC grey, xx.xm
2133A7A8524xxx
2133A7A8519xxx
M12 5-pole Double
Ended Female to Male
Standard Lengths for All Cable Assemblies are 1.0, 2.0, 5.0, 10.0, 15.0, 20.0 meters
(Other lengths available upon request)
(xxx extension is 1.0m = "010", 2.0m = "020", 5.0m = "050", 10m = "100“, 15m = “150”,
20m = “200”)
M12 L-Code Standard Assemblies
TABLE OF
CONTENTS
Crimp Termination HARTING Part Number
Description Male Female
8pin, slim design, straight, for cable diameter 4.4-8.8mm 21038811805
8pin, slim design, angled, for cable diameter 5.7-8.8mm 21038813805 21038814805
8pin, slim design, straight, for cable diameter 5.7-8.8mm 21038812805
Click here for PushPull options
Click here for Crimp Contacts and Tooling
Click here for preLink® options
M12 Crimp Male 8-pole
Slim Design Angled M12 Crimp Female 8-pole
Slim Design Straight
M12 X-Code Connectors
TABLE OF
CONTENTS
Crimp Termination HARTING Part Number
8pin female connector, PFT, slim design, straight, for cable
diameter 5.5-8.8mm** 21038812825
8pin female connector, PFT, slim design, straight, for cable
diameter 4.5-8.8mm** 21038812835
Other
8pin female to RJ45 panel feed through straight, Cat6A 21033812800
8pin female to RJ45 panel feed through angled, Cat6A 21033814800
8pin female/female gender changer, Cat6A** 21033816816
M12 D-code (4pin) female to PushPull X-
code (8pin) female
gender changer** 21033816404
Click here for PushPull options
Click here for Crimp Contacts and Tooling
Click here for preLink® options
**Compatible with PushPull
M12 PFT Crimp Female
8-pole Slim Design
M12 PFT Female to
RJ45 8-pole Straight
M12 X-Code Connectors –Panel Feed Through
TABLE OF
CONTENTS
Cat 6A Versions HARTING Part Number
Description Straight Angled
8pin female PCB without housing, Cat6A** 21033812806 21033814806
8pin female PCB with rear panel mounting, Cat6A
(w/ housing 21033012000)21033812810 21033814807
8pin female PCB with rear panel mounting, Cat6A
(w/ housing 21033012000) (individual piece) 21033812811 21033814809
8pin female PCB with rear panel mounting, Cat6A
(w/ housing 21033012002) 21033812804 21033814804
8pin female PCB with front panel mounting, Cat6A
(w/ housing 21033012003)** 21033812802 21033814802
8pin female PCB with front panel mounting, Cat6A
(w/ housing 21033012003) (individual piece)** 21033812813 21033814810
Cat 5 Versions
8pin female PCB without housing, straight, Cat5** 21033812807
8pin female PCB with rear panel mounting, straight, Cat5
(w/ housing 21033012002) 21033812805
8pin female PCB with rear panel mounting, straight, Cat5
(w/ housing 21033012000)21033812809
8pin female PCB with rear panel mounting, straight, Cat5
(w/ housing 21033012000) (individual piece) 21033812812
8pin female PCB with front panel mounting, straight, Cat5
(w/ housing 21033012003)** 21033812803
8pin female PCB with front panel mounting, straight, Cat5
(w/ housing 21033012003) (individual piece)** 21033812814
M12 Cat6A Female
8-pole PCB w/o housing
M12 Cat 6A Female
8-pole PCB with rear
panel mounting
M12 Cat 5 Female 8-pole
PCB with rear panel mounting
**Compatible with PushPull
M12 X-Code Connectors –PCB Mounts
TABLE OF
CONTENTS
SMT PCB Mounts with transformers, shielded HARTING Part Number
Description 1 Gbit 10 Gbit
8pin female straight* 21033812820
8pin female straight, reel of 75pieces* 21033812821
8pin female straight, shielded, (w/o housing) 21033812815 21033812818
8pin female straight, PoE (Power over Ethernet) enabled
(w/o housing) 21033812817 21033812823
8pin female straight, PoE enabled (w/ housing
21033012006)21033812824 21033812825
8pin female straight, (w/o housing) 21033814820 21033814823
8pin female straight, PoE enabled (w/o housing) 21033814822 21033814825
8pin female angled, PoE enabled (w/ housing
21033012006)21033814826 21033814827
*For housing, please use 21410000010 or 21410000013
To learn more about M12 PCB Mounts with transformers, click here
M12 Female 8-pole
Straight SMT PCB Mount M12 Female 8-pole Straight SMT
with transformer PCB Mount
M12 X-Code Connectors –PCB Mounts
TABLE OF
CONTENTS
8pin Single Ended Press & Go
HARTING Part Number
Straight male, 4x2xAWG26/7 Cat6a, PVC yellow, xx.xm 21330500855xxx
Straight male, 4x2xAWG26/7 Cat7a, PUR yellow, xx.xm 21330500854xxx
8pin Double Ended Press & Go
Straight male to straight male, 4x2xAWG26/7 Cat6a, PVC yellow,
xx.xm 21330505855xxx
Straight male to straight male, 4x2xAWG26/7 Cat7a, PUR yellow,
xx.xm 21330505850xxx
8pin Single Ended - Panel Feed Through
Female Panel Feed Through, (4x2xAWG26/7) Cat7a, PUR yellow
xx.xm 21330800850003
M12 8-pole PFT Single
Ended Female
M12 X-Code Standard Assemblies
TABLE OF
CONTENTS
8pin to RJ45 Press
& Go
HARTING Part Number
Male to Cat6 RJ45, 4x2xAWG26/7, PVC, 1m 09478411001
Male to Cat6 RJ45, 4x2xAWG26/7, PVC, 2m 09478411002
Straight male to RJ45, 4x2xAWG26/7 Cat6a, PVC yellow, xx.xm 09489323757xxx
Straight male to RJ45, 4x2xAWG26/7 Cat6a, PUR yellow, xx.xm 09489323756xxx
Straight male to RJ45, 4x2xAWG26/7 Cat5e, PVC Outdoor black,
xx.xm 09489323754xxx
8pin Panel Feed Through to RJ45
Double Ended, female PFT to RJ45, (4x2xAWG26/7) Cat5e, PVC
outdoor black, xx.xm 09482369754xxx
Har-port RJ45 to M12 female PFT, 4x2xAWG26/7 Cat5e, PVC
outdoor black, xx.xm 09481369754xxx
8pin PushPull Press & Go to RJ45
PushPull Press&Go, straight male to RJ45, 4x2xAWG26/7 Cat6a,
PVC yellow, xx.xm** 09488223757xxx
PushPull Press&Go, straight male to RJ45, 4x2xAWG26/7 Cat6a,
PUR yellow, xx.xm** 09488223756xxx
Profinet Options
Press&Go, straight female, Profinet PVC (4x2xAWG23/7) Cat6a
green, xx.xm 21331500857xxx
Straight female to straight female, Profinet PVC (4x2xAWG23/7)
Cat6a green, xx.xm 21331515857xxx
**Compatible with PushPull, for PushPull Press & Go standard lengths are
1m, 2m, 3m, 5m, 10m
M12 8-pole PushPull Press & Go
Straight Male to RJ45 M12 8-pole Press & Go
Straight Male to RJ45
M12 X-Code Standard Assemblies
TABLE OF
CONTENTS
M12 8-pole PushPull Press & Go
Straight Male EtherRail Flex
8pin Single
Ended Press & Go
HARTING Part Number
Press&Go, straight male, EtherRail® Flex (4x2xAWG24/7) Cat7
black, xx.xm 21330500853xxx
Press&Go, straight female, EtherRail®
Flex (4x2xAWG24/7) Cat7
black, xx.xm 21331500853xxx
8pin Single Ended Panel Feed Through
Female Panel Feed Through to Flying Leads, EtherRail® Flex
(4x2xAWG24/7) Cat7 black, xx.xm 21330700853xxx
Press&Go, straight male to female panel feed through, EtherRail
®
Flex (4x2xAWG24/7) Cat7 black, PVC, xx.xm 21330705853xxx
8pin Single Ended PushPull Press & Go
PushPull Press&Go, straight male, EtherRail® Flex
(4x2xAWG24/7) Cat7 black, xx.xm** 21332900853xxx
**Compatible with PushPull, for PushPull Press & Go standard lengths are
1m, 2m, 3m, 5m, 10m
M12 X-Code Ha-VIS EtherRail® Assemblies
Lengths for EtherRail® Cable Assemblies are
0.5, 1.0, 1.5, 2.0, 5.0, 7.5, 10.0, 15.0, 20.0 meters
(Other lengths available upon request)
(xxx extension is 0.5m = "005", 1.0m = "010", 1.5m = "015", 5.0m = "050", 10m = "100“,
15m = "150“, 20m = “200“, etc.)
TABLE OF
CONTENTS
8pin Double Ended –Slim Design, Press & Go
HARTING Part Number
Straight male to straight male, EtherRail® Flex (4x2xAWG24/7)
Cat7 black, xx.xm 21330505853xxx
Straight male to straight female, EtherRail® Flex (4x2xAWG24/7)
Cat7 black, xx.xm 21331505853xxx
Straight female to straight female, EtherRail®
Flex (4x2xAWG24/7)
Cat7 black, xx.xm 21331515853xxx
Straight male to Slim Design angled male, EtherRail® Flex
(4x2xAWG24/7) Cat7 black, xx.xm 213305B8853xxx
8pin Double Ended –PushPull Press & Go
PushPull Press&Go, straight male to straight male, EtherRail®
Flex
(4x2xAWG24/7) Cat7 black, xx.xm** 21332929853xxx
8pin Double Ended –RJ45
Female panel feed through to RJ45, EtherRail® Flex
(4x2xAWG24/7) Cat7 black, xx.xm 09484463751xxx
Male slim design to RJ45, EtherRail® Flex (4x2xAWG24/7) Cat7
black, xx.xm 09487063751xxx
**Compatible with PushPull, for PushPull Press & Go standard lengths are
1m, 2m, 3m, 5m, 10m
M12 X-Code Ha-VIS EtherRail® Assemblies
Lengths for EtherRail® Cable Assemblies are
0.5, 1.0, 1.5, 2.0, 5.0, 7.5, 10.0, 15.0, 20.0 meters
(Other lengths available upon request)
(xxx extension is 0.5m = "005", 1.0m = "010", 1.5m = "015", 5.0m = "050", 10m = "100“,
15m = "150“, 20m = “200“, etc.)
TABLE OF
CONTENTS
Connectors HARTING Part Number
HARAX® / IDC Termination
7/8" circular 5pin male 21041161505
7/8" circular 4+PE female 21041162505
Panel Receptacles
7/8" circular 2+PE pin male panel feed through to 20cm AWG18
flying leads 21043161305
7/8
" circular 2+PE pin female panel feed through to 0.5m AWG18
flying leads 21043162301
7/8" circular 4pin female panel feed through to 20cm AWG18
flying leads 21043162400
7/8" circular 4pin female panel feed through to 0.5m AWG18
flying leads 21043162401
7/8" circular 4+PE pin male panel feed through to 0.5m AWG18
flying leads 21347400571005
7/8
" circular 4+PE pin female panel feed through to 0.5m AWG18
flying leads 21043162501
7/8” 4+PE Female
HARAX®
7/8” 4-pole Female PFT to
0.5 AWG18 flying leads
7/8” Connectors and Panel Receptacles
TABLE OF
CONTENTS
Standard Lengths for 7/8” Single Ended Cable Assemblies are
1.5, 3.0, 5.0, 7.5, 10.0 meters
(Other lengths available upon request)
(xxx extension is 1.5m = "015", 3.0m = "030", 5.0m = "050", 7.5m = "075", 10m = "100")
2pin+GND Single Ended
HARTING Part Number
Description
PVC Gray
PUR Black
2pin+PE, straight female, xx.xm
21349700393xxx
21349700394xxx
Other
2pin+PE, straight female, TPU, 2.0m 21045162302**
4pin, straight male, TPU, 2.0m 21045161402**
7/8” Standard Assemblies
4pin Single Ended
4pin, straight female, xx.xm
21349700495xxx
21349700496xxx
4pin, angled female, xx.xm
21349900495xxx
21349900496xxx
4pin+PE Single Ended
4pin+PE, straight female, xx.xm
21349700597xxx
21349700598xxx
4pin+PE, angled female, xx.xm
21349900597xxx
21349900598xxx
7/8” 4-pole Female
Single Ended Angled
TABLE OF
CONTENTS
Standard Lengths for 7/8” Double Ended Cable Assemblies are
0.3, 0.6, 1.0, 1.5 and 2.0 meters
(Other lengths available upon request)
(xxx extension is 0.3m = "003", 0.6m = "006", 0.1m = "010", 1.5m = "015", 2.0m = “020")
4pin + PE Double Ended
4pin+PE, straight male/ straight female, xx.xm
21349697597xxx
21349697598xxx
4pin+PE, angled male/ angled female, xx.xm
21349899597xxx
21349899598xxx
7/8” 4-pole Double
Ended Straight 7/8” 4-pole Double
Ended Angled
7/8” Standard Assemblies
4pin Double Ended
Description
PVC Gray
PUR Black
4pin, straight male/ straight female, xx.xm
21349697495xxx
21349697496xxx
4pin, angled male/ angled female, xx.xm
21349899495xxx
21349899496xxx
TABLE OF
CONTENTS
Ha-VIS preLink® HARTING Part Number
Housing - shielded, straight 20820001210
Male Insert –4pin 20820051214
Connector Set (housing and insert) –Male (buy cube separate) 20820050001
Connector Set (housing and insert) –Female (buy cube
separate) 20820052001
RJ45 terminal block,AWG 22/23 (yellow) –10 pieces 20820000001
RJ45 terminal block,AWG 26/27 (white) –10 pieces 20820000003
RJ45 terminal block (4pin), AIDA compliant, AWG 23-22
(10 pieces) –Black 20820000005
RJ45 terminal block (4pin), AIDA compliant, AWG 23-22
(100 pieces) –Black 20820000005XL
Assembly Tool 20820009901
M12 preLink® Housing and
Insert Connector Set
Assembly Tool
Ha-VIS preLink®: M12 D-Code Connectors
TABLE OF
CONTENTS
Ha-VIS preLink® HARTING Part Number
Housing - shielded, straight 20820001210
Male Insert –8pin 20820061218
Connector Set (housing and insert) –Male (buy cube
separate) 20820050002
Connector Set (housing and insert) –Female (buy cube
separate) 20820062001
RJ45 terminal block,AWG 22/23 (yellow) –10 pieces 20820000001
RJ45 terminal block,AWG 26/27 (white) –10 pieces 20820000003
Assembly Tool 20820009901
M12 preLink® Housing and
Insert Connector Set
Terminal Block
Ha-VIS preLink®: M12 X-Code Connectors
TABLE OF
CONTENTS
Ha-VIS preLink® HARTING Part Number
Cat5 Type C 2x2xAWG22/7, preLink terminal to RJ45, PUR
green, xx.xm 20826311xxx
Cat5
Type C 2x2xAWG22/7, preLink terminal double sided, PUR
green, xx.xm 20826302xxx
Cat6a
4x2AWG27/7, preLink terminal with protection cap to flying
leads, PUR yellow, xx.xm 20826001xxx
Cat6a 4x2AWG27/7, preLink terminal with protection cap -
double ended, PUR yellow, xx.xm 20826002xxx
Cat6a 4x2AWG27/7, preLink terminal with protection cap to
overmolded RJ45, PUR yellow, xx.xm 20826011xxx
Ha-VIS preLink®: Cable Assemblies
Ha-VIS preLink® preLink
terminal double sided
Ha-VIS preLink® preLink
terminal to RJ45
TABLE OF
CONTENTS
PushPull Connectors
HARAX® / IDC Termination HARTING Part Number
4pin, shielded, slim design, AWG 22, for cable 5.7-8.8mm
21033221401
21033222401
Crimp Termination
4/5pin male shielded, crimp, straight, for cable 5.7-8.8mm 21038211530
4/5pin male shielded, crimp, angled, for cable 5.7-8.8mm 21038213530
8pin male shielded, crimp, straight, for cable 5.7-8.8mm 21038211830
8pin female shielded, crimp, straight, for cable 5.7-8.8mm 21038212830
8pin male shielded, crimp, angled, for cable 5.7-8.8mm 21038213830
Crimp Termination - Panel Feed Through
4/5pin female shielded, PFT, for cable 5.7-8.8mm 21038212525
8pin female shielded, PFT, straight, for cable 5.7-8.8mm 21038212825
8pin female shielded, PFT, straight, for cable 4.5-8.8mm 21038212835
Through-Hole PCB Mounts Male
4pin straight PCB mount (w/o housing), screened version 21033211418
5pin straight PCB mount (w/o housing), screened version 21033211518
8pin straight PCB mount (w/o housing), screened version 21033211818
Click here for Crimp Contacts and Tooling
M12 Crimp Male 4/5-pole
slim design straight shielded
M12 Crimp Female 8-
pole Shielded Straight
PushPull: M12 A-Code and Compatible Parts
TABLE OF
CONTENTS
PushPull Connectors
HARAX® / IDC Termination HARTING Part Number
4pin male shielded, HARAX/IDC, AWG 22, for cable 5.7-8.8mm 21033821401
4pin female shielded, HARAX/IDC, AWG 22, for cable 5.7-
8.8mm
21033822401
Crimp Termination
4pin male shielded, crimp, straight, for cable 5.7-8.8mm 21038811430
4pin male shielded, crimp, angled, for cable 5.7-8.8mm 21038813430
4pin female shielded, crimp, straight, for cable 5.7-8.8mm 21038812430
Female adapter to PushPull female (to convert standard female
M12 to PushPull M12) 21033812403
Crimp Termination - Panel Feed Through version
4pin shielded, PFT, straight, female, for cable 5.7-8.8mm ** 21038812425
PCB Mounts
4pin female, angled PCB mount w/o fixing hole** 21033814436
4pin female, angled PCB mount with fixing hole** 21033814437
Other
4pin gender changer female/female** 21033816403
Click here for Crimp Contacts and Tooling
M12 PushPull Crimp
4-pole Male Shielded
M12 PushPull Crimp 4-
pole Female Adapter
PushPull: M12 D-Code and Compatible Parts
TABLE OF
CONTENTS
PushPull Connectors
Crimp Termination HARTING Part Number
8pin male connector, straight, for cable 5.7-8.8mm 21038811830
8pin male connector, angled, for cable 5.7-8.8mm 21038813830
Crimp Termination –Panel Feed Through
8pin female connector, PFT, straight, for cable 5.5-8.8mm 21038812825
Cat 6A PCB Mount Versions Straight Angled
8pin female PCB without housing
21033812806
21033814806
8pin female PCB with front panel mounting, (w/ housing
21033012003)
21033812802
21033814802
8pin female PCB with front panel mounting, (w/ housing
21033012003) (individual piece)
21033812813
21033814810
Cat 5 PCB Mount Versions
8pin female PCB without housing, straight, 21033812807
8pin female PCB with front panel mounting, straight, (
w/ housing
21033012003)21033812803
8pin female PCB with front panel mounting, straight, (
w/ housing
21033012003) (individual piece) 21033812814
Other
8pin female/female gender changer, Cat6A 21033816816
M12 D-code (4pin) female to PushPull X-code (8pin) female
gender changer 21033816404
M12 PushPull Crimp Male
8-pole Slim Design Straight M12 PushPull Crimp Male
8-pole Slim Design Angled
Click here for Crimp Contacts and Tooling
PushPull: M12 X-Code and Compatible Parts
TABLE OF
CONTENTS
M12 A-Code HARTING Part Number
Description Male Female
4pin female, HARAX® (IDC) 21032222435
4/5pin, crimp, for cable 4.5-8.8mm 21038222535 21038221535
M12 B-Code
5pin, shielded, crimp, for cable diameter 4.5-8.8mm 21038411535 21038412535
M12 D-Code
4pin, shielded, crimp, for cable diameter 4.5-8.8mm 21038821435
M12 D-Code INOX
Male 4-pole straight
M12 B-Code INOX
Female 5-pole straight
Stainless Steel (INOX) Options
TABLE OF
CONTENTS
Crimp Flange Connectors
Innovative solutions from HARTING are always in development, and the latest
circular product to come out is the M12 Crimp provides near-perfect shielding for
the connector and cable. Crimp flange improves mechanical resistance and
shielding by incorporating the crimp flange piece that crimps the cable and
connector together for a solid connection. These have been specifically designed
for rail application where higher shielding is required.
Please contact HARTING’s Tech Support for more information on this new product
here.
TABLE OF
CONTENTS
Crimp Flange Options
Connectors with Crimp Flange Set Included
Using Crimp Flange Set 21010100017 (5.3mm) Male Female
M12 A-Code 4/5pin shielded, crimp, straight 21038211511 21038212511
M12 A-Code 4/5pin shielded, crimp, angled 21038213511 21038214511
Using Crimp Flange Set 21010100018 (6.0mm)
M12 A-code 4/5pin shielded, crimp, straight 21038211512 21038212512
M12 A-code 4/5pin shielded, crimp, angled 21038213512 21038214512
Using Crimp Flange Set 21010100019 (6.6mm)
M12 D-code 4pin shielded, crimp, straight 21038211512 21038212512
M12 D-code 4pin shielded, crimp, angled 21038213512 21038214512
Using Crimp Flange Set 21010100020 (7.8mm)
M12 D-code 4pin shielded, crimp, straight 21038811412 21038812412
M12 D-Code 4pin Male
Straight, for cable 6.6mm M12 A-Code 4/5pin Male
Angled, for cable 6.0mm
There are more crimp flange options available for specific cables, please contact HARTING’s
Tech Support for more information here.
Please use the links to see the datasheets that provide information on the corresponding tools
and crimp inserts for each set.
Cable Crimp Flange Diameter
BETAtrans GKW C-flex R 600/1000V 2x0.75mm² 21010100017 5.3mm
BETAtrans GKW C-FLEX R 600/1000V 4x0.75mm² 21010100018 6.0mm
BETAtrans Data C-FLEX Cat5 1x4xAWG 22/7 21010100019 6.6mm
RADOX DATABUS 120 OHM 2x0.5mm²+0.5mm² 21010100020 7.8mm
BETAtrans Data C-FLEX 4x2xAWG24/7 21010100021 8.1mm
RADOX DATABUS 100 OHM Cat5 COM 4XAWG22 21010100022 7.3mm
DTREN150002-300V-4x0,5mm², Qadrax 100 Ohms-
Filotex 21010100024 8.5mm
TABLE OF
CONTENTS
Sensor Actuator Boxes
Sensor Actuator Boxes
Power strips – they’re everywhere and commonly used when there are many
devices that need power. Sensor actuator boxes are the same concept, except
for M8/M12 connectors
This allows easy and fast installation that can be close to the sensors /
devices
They can be applied in various industries including robotics, food + beverage,
automation, and many more
Click here to learn more about sensor actuator boxes
See HARTING’s selection on sensor actuator boxes here
TABLE OF
CONTENTS
M8 Snap
-In A Code to M8 A-Code
HARTING Part Number
Description
3pin
4pin
Male angled to female straight 0.5m, PUR black
2136D3D5328005
2136D3D5428005
Male angled to female straight 1m, PUR black
2136D3D5328010
2136D3D5428010
Male angled to female straight 2m, PUR black
2136D3D5328020
2136D3D5428020
M8 Snap-In A Code to M12 A-Code
Male angled to female straight 0.5m, PUR black
2136D3D4328005
2136D3D4428005
Male angled to female straight 1m, PUR black
2136D3D4328010
2136D3D4428010
Male angled to female straight 2m, PUR black
2136D3D4328020
2136D3D4428020
M8 Snap-In A Code
to M8 A Code M8 Snap-In A Code
to M12 A Code
M8 A-Code Snap-In Assemblies
These cord sets are especially designed to work with HARTING Sensor Actuator Boxes.
The male angled M8 side of the connector allows for fast easy snap in connection.
TABLE OF
CONTENTS
M12 A-Code 4pin Assemblies for har-SAB
4pin Orange Overmolded Single Ended Assemblies (for SAB) PUR Black
120degree angled male with black mating face for left side,
4xAWG22, xx.xm 2137B600430xxx
120degree angled male with orange mating face for right side,
4xAWG22, xx.xm 2137B700430xxx
For the M12 connection to sensor actuator boxes, straight circular connectors are normally
used. However, they will result in an increased space requirement because of the bending
radius. HARTING has set up M12 A-code overmolded cord sets which have a 120°angled
cable entry to allow for a more efficient use of space. There are two different versions of the
mating face in order to simplify orientation - the mating face for the left side is black while the
right side is orange.
TABLE OF
CONTENTS
M12 Ethernet Switches
Ethernet switches are needed for networks in production facilities, and
HARTING has a wide variety of switches available –including the Ha-VIS
eCon 4000 and 9000 families with an M12 interface.
Click here to see HARTING’s selection on Ethernet switches
Follow this link to see a flyer for Ethernet switches
TABLE OF
CONTENTS
Housings and Lock Nuts
Housings HARTING Part Number
Description Male Female
M12 Housing, rear mount, for PCB mount 21033011000 21033012000
M12 Housing, front mount, for PCB mount** 21033011003 21033012003
M12 SMT Housing M14x1, 9mm height 21410000012 21410000010
M12 SMT Housing M14x1, 13mm height 21410000013
SMT Counter Nut M14x1 21410000011
Lock Nuts
Metal Lock Nut M16 (SW18) 21010000018
Metal Lock Nut PG13.5 (SW23) 21010000020
Lock Nut - PG13.5 (SW24) 21010000039
M12 Housing Rear Mount
for Male PCB Mount Metal Lock Nut PG 13.5
TABLE OF
CONTENTS
Caps and Covers HARTING Part Number
Description Male Female
Metal Cover for M12 w/ lanyard for cable 21010000033
21010000030
Metal Cover for M12 w/ lanyard with small eyelet (lanyard
screwed to cap) 21010000038
21010000031
Plastic Dust Cap for M12 (Viton) 21010000003
Plastic Cover for M12 w/ lanyard for cable 21410000001
21410000002
Plastic Cover for M8 w/ lanyard for cable 21410000003
21410000004
Plastic Dust Cap for
M12 (Viton) Plastic Cover for M12 Female
w/ lanyard for cable
Caps and Covers
TABLE OF
CONTENTS
Crimp Contacts and Tooling for A, B, D, X, Coding
A, B, D Code Tools and Crimp Contacts HARTING Part Number
Description Male Female
D-Sub Turned Contact for AWG 22-18 PL1 09670003576 09670003476
D-Sub Turned Contact for AWG 24-20 PL1 09670008576 09670008476
D-Sub Turned Contact for AWG 26-22 PL1 09670005576 09670005476
D-Sub Crimp Tool (Turned Contacts) 09990000501
D-Sub Crimp Tool Locator for D-Sub turned contacts 09990000531
8-pin Crimp Contacts and Tools
M12 A-code 8pin contact AWG26-22 (0.13-0.33mm2),
PL1
21011009020
21011009025
D-Sub Crimp Tool Locator for M12 A-code 8pin contacts 61036000023
09990000637
X-Code Tools and Crimp Contacts
M12 X-code contact AWG28-24 (0.08-0.22mm2), PL1 21011009014 21011009023
M12 X-code contact AWG26-23 (0.13-0.25mm2), PL1 21011009019 21011009021
D-Sub Crimp Tool (Turned Contacts) 09990000501
D-Sub Crimp Tool Locator for X-code male contacts 09990000525
D-Sub Crimp Tool Locator for X-code female contacts 09990000635
D-Sub Crimp Tool
(Turned Contacts) D-Sub Crimp Tool
Locator for M12 A-Code
TABLE OF
CONTENTS
M12 L-Code Crimp Contacts and Tooling
Crimp Contacts and Tooling HARTING Part Number
Description Male Female
D-Sub Crimp Tool for Power Contacts 09990000509
D-Sub Crimp Tool Locator for M12 L-Code Power
Contacts
09990000638
M12 Power Contact, 23.2mm, AWG21 / 0.5mm2 21011009923 21011009931
M12 Power Contact, 23.2mm, AWG20 / 0.75mm2 21011009924 21011009932
M12 Power Contact, 23.2mm, AWG16 / 1.5mm2 21011009925 21011009933
M12 Power Contact, 23.2mm, AWG14 / 2.5mm2 21011009926 21011009934
M12 Power PE Contact, male, 24.8mm, AWG21 / 0.5mm2 21011009927
M12 Power PE Contact, male, 24.8mm, AWG20 /
0.75mm2
21011009928
M12 Power PE Contact, male, 24.8mm, AWG16 / 1.5mm2 21011009929
M12 Power PE Contact, male, 24.8mm, AWG14 / 2.5mm2 21011009930
M12 Power Contact
Male AWG16 M12 Power Contact
Female AWG14 M12 D-Sub Crimp Tool
for Power Contacts
TABLE OF
CONTENTS
M8 Dynamometric
Screwdriver
Description HARTING
Part Number
M8 Dynamometric Torque Screwdriver, SW9 (0.4Nm) 09990000380
M12 Dynamometric Torque Screwdriver, SW13 (0.6Nm) for M12-
S
09990000382
M12 Dynamometric Torque Screwdriver, SW15 (0.6Nm) for M12
Slim Design 09990000646
M12 Dynamometric Torque Screwdriver, SW17 (0.6Nm) for M12-
L
09990000384
7/8" Dynamometric Torque Screwdriver, SW22 (1.5Nm) 09990000395
M12 - L Dynamometric
Screwdriver
M8 / M12 / 7/8” Dynamometric Screwdrivers
