BC846BDW1T1, BC847BDW1T1, BC848CDW1T1 Dual General Purpose Transistors http://onsemi.com NPN Duals (3) These transistors are designed for general purpose amplifier applications. They are housed in the SOT-363/SC-88 which is designed for low power surface mount applications. * Device Marking: BC846BDW1T1 = 1B BC847BDW1T1 = 1F BC848CDW1T1 = 1L (2) Q1 Q2 (4) (5) Features SOT-363 CASE 419B STYLE 1 6 MAXIMUM RATINGS 1 Symbol BC846 BC847 BC848 Unit Collector -Emitter Voltage VCEO 65 45 30 V Collector -Base Voltage VCBO 80 50 30 V Emitter -Base Voltage VEBO 6.0 6.0 5.0 V IC 100 100 100 mAdc Collector Current - Continuous Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected. THERMAL CHARACTERISTICS Characteristic (6) DIAGRAM MARKING * Pb-Free Package is Available Rating (1) Symbol Max Unit Total Device Dissipation Per Device FR-5 Board (Note 1) TA = 25C Derate Above 25C PD 380 250 mW Thermal Resistance, Junction-to-Ambient Junction and Storage Temperature Range 3.0 mW/C RJA 328 C/W TJ, Tstg -55 to +150 C 1xm 1x = Specific Device Code x = B, F, L m = Date Code ORDERING INFORMATION Package Shipping BC846BDW1T1 SOT-363 3000 Units/Reel BC847BDW1T1 SOT-363 3000 Units/Reel BC847BDW1T1G SOT-363 (Pb-Free) 3000 Units/Reel BC848CDW1T1 SOT-363 3000 Units/Reel Device For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. 1. FR-5 = 1.0 x 0.75 x 0.062 in Semiconductor Components Industries, LLC, 2004 June, 2004 - Rev. 3 1 Publication Order Number: BC846BDW1T1/D BC846BDW1T1, BC847BDW1T1, BC848CDW1T1 ELECTRICAL CHARACTERISTICS (TA = 25C unless otherwise noted) Characteristic Symbol Min Typ Max 65 45 30 - - - - - - 80 50 30 - - - - - - 80 50 30 - - - - - - 6.0 6.0 5.0 - - - - - - - - - - 15 5.0 BC846B, BC847B BC848C - - 150 270 - - BC846B, BC847B BC848C 200 420 290 520 450 800 Unit OFF CHARACTERISTICS Collector -Emitter Breakdown Voltage (IC = 10 mA) Collector -Emitter Breakdown Voltage (IC = 10 A, VEB = 0) Collector -Base Breakdown Voltage (IC = 10 A) Emitter -Base Breakdown Voltage (IE = 1.0 A) V(BR)CEO BC846 BC847 BC848 V V(BR)CES BC846 BC847 BC848 V V(BR)CBO BC846 BC847 BC848 V V(BR)EBO BC846 BC847 BC848 Collector Cutoff Current (VCB = 30 V) (VCB = 30 V, TA = 150C) ICBO V nA A ON CHARACTERISTICS DC Current Gain (IC = 10 A, VCE = 5.0 V) (IC = 2.0 mA, VCE = 5.0 V) hFE - Collector -Emitter Saturation Voltage (IC = 10 mA, IB = 0.5 mA) Collector -Emitter Saturation Voltage (IC = 100 mA, IB = 5.0 mA) VCE(sat) - - - - 0.25 0.6 V Base -Emitter Saturation Voltage (IC = 10 mA, IB = 0.5 mA) Base -Emitter Saturation Voltage (IC = 100 mA, IB = 5.0 mA) VBE(sat) - - 0.7 0.9 - - V Base -Emitter Voltage (IC = 2.0 mA, VCE = 5.0 V) Base -Emitter Voltage (IC = 10 mA, VCE = 5.0 V) VBE(on) 580 - 660 - 700 770 mV fT 100 - - MHz Cobo - - 4.5 pF - - 10 SMALL-SIGNAL CHARACTERISTICS Current -Gain - Bandwidth Product (IC = 10 mA, VCE = 5.0 Vdc, f = 100 MHz) Output Capacitance (VCB = 10 V, f = 1.0 MHz) Noise Figure (IC = 0.2 mA, VCE = 5.0 Vdc, RS = 2.0 k,f = 1.0 kHz, BW = 200 Hz) http://onsemi.com 2 NF dB BC846BDW1T1, BC847BDW1T1, BC848CDW1T1 TYPICAL CHARACTERISTICS - BC847 & BC848 1.0 VCE = 10 V TA = 25C 1.5 TA = 25C 0.9 0.8 V, VOLTAGE (VOLTS) hFE , NORMALIZED DC CURRENT GAIN 2.0 1.0 0.8 0.6 0.4 VBE(sat) @ IC/IB = 10 0.7 VBE(on) @ VCE = 10 V 0.6 0.5 0.4 0.3 0.2 0.3 VCE(sat) @ IC/IB = 10 0.1 0.2 0.2 0.5 50 2.0 5.0 10 1.0 20 IC, COLLECTOR CURRENT (mAdc) 100 0 0.1 200 2.0 TA = 25C 1.6 IC = 200 mA 1.2 IC = IC = 10 mA 20 mA IC = 50 mA IC = 100 mA 0.8 0.4 0 0.02 10 0.1 1.0 IB, BASE CURRENT (mA) 20 1.0 -55C to +125C 1.2 1.6 2.0 2.4 2.8 f, T CURRENT-GAIN - BANDWIDTH PRODUCT (MHz) C, CAPACITANCE (pF) TA = 25C Cib 3.0 Cob 2.0 1.0 0.4 0.6 0.8 1.0 2.0 4.0 6.0 8.0 10 VR, REVERSE VOLTAGE (VOLTS) 20 100 Figure 4. Base-Emitter Temperature Coefficient 10 5.0 10 1.0 IC, COLLECTOR CURRENT (mA) 0.2 Figure 3. Collector Saturation Region 7.0 50 70 100 Figure 2. "Saturation" and "On" Voltages VB, TEMPERATURE COEFFICIENT (mV/ C) VCE , COLLECTOR-EMITTER VOLTAGE (V) Figure 1. Normalized DC Current Gain 0.2 0.3 0.5 0.7 1.0 2.0 3.0 5.0 7.0 10 20 30 IC, COLLECTOR CURRENT (mAdc) 40 400 300 200 VCE = 10 V TA = 25C 100 80 60 40 30 20 0.5 0.7 Figure 5. Capacitances 1.0 2.0 3.0 5.0 7.0 10 20 IC, COLLECTOR CURRENT (mAdc) 30 Figure 6. Current-Gain - Bandwidth Product http://onsemi.com 3 50 BC846BDW1T1, BC847BDW1T1, BC848CDW1T1 TYPICAL CHARACTERISTICS - BC846 TA = 25C VCE = 5 V TA = 25C 0.8 VBE(sat) @ IC/IB = 10 V, VOLTAGE (VOLTS) hFE , DC CURRENT GAIN (NORMALIZED) 1.0 2.0 1.0 0.5 0.6 VBE @ VCE = 5.0 V 0.4 0.2 0.2 VCE(sat) @ IC/IB = 10 0 10 100 1.0 IC, COLLECTOR CURRENT (mA) 0.1 0.2 0.2 0.5 1.0 2.0 TA = 25C 1.6 20 mA 50 mA 100 mA 200 mA 1.2 IC = 10 mA 0.8 0.4 0 0.02 0.05 0.1 0.2 0.5 1.0 2.0 IB, BASE CURRENT (mA) 5.0 10 20 20 Cib 10 6.0 Cob 0.2 0.5 1.0 2.0 10 20 5.0 VR, REVERSE VOLTAGE (VOLTS) 50 50 100 200 -1.4 -1.8 VB for VBE -55C to 125C -2.2 -2.6 -3.0 f, T CURRENT-GAIN - BANDWIDTH PRODUCT C, CAPACITANCE (pF) TA = 25C 0.1 200 0.2 0.5 10 20 5.0 1.0 2.0 IC, COLLECTOR CURRENT (mA) Figure 10. Base-Emitter Temperature Coefficient 40 2.0 100 -1.0 Figure 9. Collector Saturation Region 4.0 50 Figure 8. "On" Voltage VB, TEMPERATURE COEFFICIENT (mV/ C) VCE , COLLECTOR-EMITTER VOLTAGE (VOLTS) Figure 7. Normalized DC Current Gain 10 20 2.0 5.0 IC, COLLECTOR CURRENT (mA) 500 VCE = 5 V TA = 25C 200 100 50 20 1.0 5.0 10 50 100 IC, COLLECTOR CURRENT (mA) 100 Figure 11. Capacitance Figure 12. Current-Gain - Bandwidth Product http://onsemi.com 4 BC846BDW1T1, BC847BDW1T1, BC848CDW1T1 1.0 r(t), TRANSIENT THERMAL RESISTANCE (NORMALIZED) D = 0.5 0.2 0.1 0.1 0.05 0.02 0.01 ZJA(t) = r(t) RJA RJA = 328C/W MAX D CURVES APPLY FOR POWER PULSE TRAIN SHOWN READ TIME AT t1 TJ(pk) - TC = P(pk) RJC(t) P(pk) t1 0.01 t2 DUTY CYCLE, D = t1/t2 SINGLE PULSE 0.001 0 10 1.0 100 t, TIME (ms) 1.0k 10k 100k 1.0M Figure 13. Thermal Response The safe operating area curves indicate IC-VCE limits of the transistor that must be observed for reliable operation. Collector load lines for specific circuits must fall below the limits indicated by the applicable curve. The data of Figure 14 is based upon TJ(pk) = 150C; TC or TA is variable depending upon conditions. Pulse curves are valid for duty cycles to 10% provided TJ(pk) 150C. T J(pk) may be calculated from the data in Figure 13. At high case or ambient temperatures, thermal limitations will reduce the power that can be handled to values less than the limitations imposed by the secondary breakdown. -200 IC, COLLECTOR CURRENT (mA) 1s 3 ms -100 -50 -10 -5.0 -2.0 -1.0 TA = 25C TJ = 25C BC558 BC557 BC556 BONDING WIRE LIMIT THERMAL LIMIT SECOND BREAKDOWN LIMIT -5.0 -10 -30 -45 -65 -100 VCE, COLLECTOR-EMITTER VOLTAGE (V) Figure 14. Active Region Safe Operating Area http://onsemi.com 5 BC846BDW1T1, BC847BDW1T1, BC848CDW1T1 PACKAGE DIMENSIONS SOT-363 (SC-88) CASE 419B-02 ISSUE T NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. 419B-01 OBSOLETE, NEW STANDARD 419B-02. A G 6 5 4 1 2 3 DIM A B C D G H J K N S -B- S D 6 PL 0.2 (0.008) M B M MILLIMETERS MIN MAX 1.80 2.20 1.15 1.35 0.80 1.10 0.10 0.30 0.65 BSC --- 0.10 0.10 0.25 0.10 0.30 0.20 REF 2.00 2.20 STYLE 1: PIN 1. EMITTER 2 2. BASE 2 3. COLLECTOR 1 4. EMITTER 1 5. BASE 1 6. COLLECTOR 2 N J C H INCHES MIN MAX 0.071 0.087 0.045 0.053 0.031 0.043 0.004 0.012 0.026 BSC --- 0.004 0.004 0.010 0.004 0.012 0.008 REF 0.079 0.087 K SOLDERING FOOTPRINT* 0.50 0.0197 0.65 0.025 0.65 0.025 0.40 0.0157 1.9 0.0748 SCALE 20:1 mm inches *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada ON Semiconductor Website: http://onsemi.com Order Literature: http://www.onsemi.com/litorder Japan: ON Semiconductor, Japan Customer Focus Center 2-9-1 Kamimeguro, Meguro-ku, Tokyo, Japan 153-0051 Phone: 81-3-5773-3850 http://onsemi.com 6 For additional information, please contact your local Sales Representative. BC846BDW1T1/D